Is the 'safe zone' identified in preoperative computed tomography helpful for choosing optimal implant for fixation of radial head fracture?

The purpose of this study is to assess the clinical significance of the radiologic safe zone based on computed tomography and to compare the outcomes of three different implants for fixation of isolated radial head fractures. We retrospectively reviewed 367 patients who underwent internal fixation for isolated radial head fractures. We newly defined two subtypes of Mason type II fractures associated with the radiographic safe zone (IIA, two-part fracture allowing for safe fixation of plate; IIB, two-part fracture not allowing for safe fixation). 170 patients (CCS group, n = 82; HCS group, n = 31; plate group, n = 57) were investigated with no significant differences in demographics. The range of pronation and supination at 1 month postoperatively (P = 0.04 and P = 0.04) and the range of supination at 6 and 12 months postoperatively (P = 0.03 and P = 0.03) were significantly smaller in the plate group. In Mason type IIB fractures, the average MEPS was higher in the CCS and HSC groups than in the plate group (P = 0.01 and P = 0.02). And the average DASH score was lower in the CCS and HCS groups (P < 0.01 and P < 0.01). Evaluation of the radiologic safe zone is potentially helpful in selecting better surgical fixation option. For type III fractures, 2.3-mm cortical screws would be a better option than Acutrak screws. Plates would not be suitable for type IIB radial head fractures.

Correlation between extension-block K-wire insertion angle and postoperative extension loss in mallet finger fracture.

INTRODUCTION: Extension-block pinning represents a simple and reliable surgical technique. Although this procedure is commonly performed successfully, some patients develop postoperative extension loss. To date, the relationship between extension-block Kirschner wire (K-wire) insertion angle and postoperative extension loss in mallet finger fracture remains unclear. HYPOTHESIS: We aimed to clarify this relationship and further evaluate how various operative and non-operative factors affect postoperative extension loss after extension-block pinning for mallet finger fracture. MATERIALS AND METHOD: A retrospective study was conducted to investigate a relationship between extension block K-wire insertion angle and postoperative extension loss. The inclusion criteria were: (1) a dorsal intra-articular fracture fragment involving 30% of the base of the distal phalanx with or without volar subluxation of the distal phalanx; and (2) <3 weeks delay from the injury without treatment. Extension-block K-wire insertion angle and fixation angle of the distal interphalangeal (DIP) joint were assessed using lateral radiograph at immediate postoperative time. Postoperative extension loss was assessed by using lateral radiograph at latest follow-up. Extension-block K-wire insertion angle was defined as the acute angle between extension block K-wire and longitudinal axis of middle phalangeal head. DIP joint fixation angle was defined as the acute angle between the distal phalanx and middle phalanx longitudinal axes. RESULTS: Seventy-five patients were included. The correlation analysis revealed that extension-block K-wire insertion angle had a negative correlation with postoperative extension loss, whereas fracture size and time to operation had a positive correlation (correlation coefficient for extension block K-wire angle: -0.66, facture size: +0.67, time to operation: +0.60). When stratifying patients in terms of negative and positive fixation angle of the DIP joint, the independent t-test showed that mean postoperative extension loss is -3.67° and +4.54° (DIP joint fixation angles of <0° and ≥0°, respectively, P=0.024). When stratifying patients in terms of extension-block K-wire insertion angle (30°, 30°-40°, >40°), ANOVA showed significantly less postoperative extension loss for higher insertion angles (>40°) than for medium insertion angles (30°-40°). Mean postoperative extension loss difference between higher insertion angle (>40°) and medium insertion angle (30°-40°) was 11° (P=0.002). DISCUSSION: Using an insertion angle of the extension-block K-wire of 40°-45° and a slightly hyperextended position of the DIP joint may help reducing postoperative extension loss. LEVEL OF EVIDENCE: Therapeutic level III.

The relationship of trigger finger and flexor tendon volar migration after carpal tunnel release.

It has been suggested that the increased frequency of trigger finger (TF) after carpal tunnel release (CTR) may be caused by the volar migration of the flexor tendons at the wrist altering the tendon biomechanics at the A1 pulley. This hypothesis has not been validated. We performed pre- and post-operative ultrasonography (USG) on the affected wrists of 92 patients who underwent CTR. Pre-operative USG was performed in neutral with no tendon loading; post-operative USG was performed in neutral unloaded and in various positions of wrist flexion whilst loading the flexor tendons with gripping. The mean volar migration of the flexor tendons after CTR was 2.2 (SD 0.4) mm in the unloaded neutral position. It was 1.8 (SD 0.4) mm in patients who did not develop TF and 2.5 (SD 0.5) mm in those who did (p = 0.0067). In loaded wrist flexion, the mean volar migration of flexor tendons after CTR in patients who did not develop TF and those who did was 2.1 and 3.0 mm in 0° flexion; 3.2 and 3.9 mm in 15° flexion; 4.3 and 5.1 mm in 30° flexion; and 4.9 and 5.8 mm in 45° flexion, respectively. There were significant differences between patients with and without TF at each flexion angle. Our data indicate that patients with greater volar migration of the flexor tendons after CTR are more likely to develop TF. This conclusion supports the hypothesis that the occurrence of TF after CTR may be caused by the bowstringing effects of the flexor tendons.

Is multimodal analgesia as effective as postoperative patient-controlled analgesia following upper extremity surgery?

INTRODUCTION: The present prospective study compared the clinical outcomes between a multimodal analgesia group and a patient-controlled analgesia (PCA) group for postoperative pain control in upper extremities surgery. HYPOTHESIS: Multimodal analgesia including pre-emptive analgesic can provide similar or superior analgesic effects and a lower incidence of adverse reactions than PCA following upper extremity surgery. PATIENTS AND METHODS: Sixty-one patients undergoing upper extremity surgery were randomized to 2 perioperative analgesic groups (multimodal analgesia and PCA). We compared the clinical outcomes: use of additional pain rescue, opioid-related complication rate, and patient's satisfaction between the 2 groups. RESULTS: No significant differences on the resting and exercise pain scores between the two groups. Also, there were no differences regarding additional pain rescue during postoperative day (POD) 1, 2 and achievement of rehabilitation protocol in both groups. However, use of additional pain rescue in PCA group was increased significantly after PCA removal. Moreover, there was significant difference in the incidence of opioid-related complications on operation day and at POD 1. At discharge, multimodal analgesia group showed significantly greater satisfaction than PCA group. DISCUSSION: Perioperative pain management following upper extremity surgery through the multimodal analgesia could be an acceptable alternative method that can provide good results.

Use of the radial groove view intra-operatively to prevent damage to the extensor pollicis longus tendon by protruding screws during volar plating of a distal radial fracture.

The aims of this study were to assess the efficacy of a newly designed radiological technique (the radial groove view) for the detection of protrusion of screws in the groove for the extensor pollicis longus tendon (EPL) during plating of distal radial fractures. We also aimed to determine the optimum position of the forearm to obtain this view. We initially analysed the anatomy of the EPL groove by performing three-dimensional CT on 51 normal forearms. The mean horizontal angle of the groove was 17.8° (14° to 23°). We found that the ideal position of the fluoroscopic beam to obtain this view was 20° in the horizontal plane and 5° in the sagittal plane. We then intra-operatively assessed the use of the radial groove view for detecting protrusion of screws in the EPL groove in 93 fractures that were treated by volar plating. A total of 13 protruding screws were detected. They were changed to shorter screws and these patients underwent CT scans of the wrist immediately post-operatively. There remained one screw that was protruding. These findings suggest that the use of the radial groove view intra-operatively is a good method of assessing the possible protrusion of screws into the groove of EPL when plating a fracture of the distal radius.

Leakage of cement in percutaneous transpedicular vertebroplasty for painful osteoporotic compression fractures.

e analysed the CT scans and radiographs of 76 vertebrae in 49 patients who underwent vertebroplasty for painful osteoporotic compression fractures. Leaks of cement were classified into three types: those via the basivertebral vein (type B), via the segmental vein (type S), and through a cortical defect (type C). More leaks were identified on CT scans than on radiographs by a factor of 1.5 (74/49). Most type-B (93%) and type-S (86%) leaks were missed or underestimated on a lateral radiograph which is usually the only view used during the injection of cement. Of the leaks into the spinal canal, only 7% (2/28) were correctly identified on radiographs. The areas on lateral radiographs where this type of leak may be observed were divided into four zones, and their diagnostic value in predicting a leak into the spinal canal was evaluated. The results showed that cement in the neural foramina had the highest positive predictive value (86%).