Moderate Signal Enhancement in Electrospray Ionization Mass Spectrometry by Focusing Electrospray Plume with a Dielectric Layer around the Mass Spectrometer's Orifice.

Electrospray ionization (ESI) is among the commonly used atmospheric pressure ionization techniques in mass spectrometry (MS). One of the drawbacks of ESI is the formation of divergent plumes composed of polydisperse microdroplets, which lead to low transmission efficiency. Here, we propose a new method to potentially improve the transmission efficiency of ESI, which does not require additional electrical components and complex interface modification. A dielectric plate-made of ceramic-was used in place of a regular metallic sampling cone. Due to the charge accumulation on the dielectric surface, the dielectric layer around the MS orifice distorts the electric field, focusing the charged electrospray cloud towards the MS inlet. The concept was first verified using charge measurement on the dielectric material surface and computational simulation; then, online experiments were carried out to demonstrate the potential of this method in MS applications. In the online experiment, signal enhancements were observed for dielectric plates with different geometries, distances of the electrospray needle axis from the MS inlet, and various compounds. For example, in the case of acetaminophen (15 µM), the signal enhancement was up to 1.82 times (plate B) using the default distance of the electrospray needle axis from the MS inlet (d = 1.5 mm) and 12.18 times (plate C) using a longer distance (d = 7 mm).

Hydrogel-enzyme micropatch array format for chemical mapping: A proof of concept.

Conventional sensing methods report on concentrations of analytes in a single point of sampled medium or provide an average value. However, distributions of substances on surfaces of sampled objects often exhibit intricate inhomogeneities. In order to obtain snapshots of the chemical distributions on surfaces, we have developed enzyme-loaded hydrogel arrays (5 × 5 and 10 × 10). The acrylic 10 × 10 array base contains 100 holes, which are filled with agarose hydrogel containing assay enzymes and substrates. Such arrays can be exposed to the analyzed surfaces to collect minute amounts of analytes. Following a brief incubation, they are subsequently visualized in a custom-built array reader device. The reader incorporates a light-emitting diode-based light source, miniature camera, and Raspberry Pi single-board computer. Two Python programs capture and analyze the images of the array to extract pixel saturation values corresponding to individual hydrogel micropatches. The method has been thoroughly optimized for mapping of glucose and lactic acid. The optimized parameters were: contact time, agarose concentration, substrate concentration, enzyme concentration ratio, and enzyme concentration. The array biosensor was further tested by mapping glucose distribution in fruit/vegetable cross-sections (apple, guava, and cucumber) and lactic acid distribution in cheese. We think that this new hydrogel-based chemical mapping method can find applications in studies related to food science, plant physiology, clinical chemistry, and forensics; wherever the distributions of analytes on the tested surfaces need to be assessed.