Impact of the Preparation Method on the Formulation Properties of Allantoin Hydrogels: Evaluation Using Semi-Solid Control Diagram (SSCD) Principles.

Allantoin possesses numerous beneficial properties for the skin, like anti-irritant effects, wound healing, skin hydration, and epithelization. In this paper, we investigated a suitable preparation method for an allantoin hydrogel using the Semi-Solid Control Diagram (SSCD) method and characterized its rheological and consistency behavior. To accomplish this, xanthan gum (XG) was selected as a model gelling agent. Briefly, four hydrogels were prepared, two without allantoin (coded M01 and M02) and two with allantoin (M1 and M2). Similarly, the formulations were either prepared through magnetic stirring (M01 and M1) or homogenization in a mortar (M02 and M2). The prepared hydrogels were evaluated using the SSCD for specific parameters and indexes. The Good Quality Index (GQI) shows a higher value for the formulation, M1 = 6.27, compared to M2 = 5.45. This result is also underlined by the value of M01 = 6.45, which is higher than M02 = 6.38. Considering the consistency, the formulation M01 possessed the highest spreadability, followed by M02 and then the allantoin hydrogels M1 and M2. The rheological behavior had a thixotropic pseudoplastic flow for all the formulations. The use of SSCD pictographs outlined the rheological properties that need improvement, the method that is suitable to prepare the allantoin hydrogels, and the influence of the allantoin suspended in the XG hydrogel.

Healthcare Service Quality Evaluated Using the Degree of Satisfaction of Patients in Romanian Community Pharmacies.

Community pharmacy has evolved a lot in recent years in terms of pharmaceutical services and marketing policies applied in Romania. This study aimed to evaluate the degree of patient satisfaction in community pharmacies in Iași, Romania correlated with the frequency of returning to the pharmacy, level of education, gender, and stress level at the time when the pharmacist dispenses the medication. A total of 30 community pharmacies were involved, and in a period of three months, they issued questionnaires to patients. 722 patients responded, and to verify the first research hypothesis, the Pearson correlation was applied. Statistical analysis revealed that there is a negative, medium-level, and significant correlation between the level of satisfaction with pharmaceutical services and the frequency of visits to the pharmacy, r = -0.342, p < 0.0001. There is also a significant, negative correlation of low intensity between the level of satisfaction with pharmaceutical services and patient status, r = -0.202, p < 0.0001. The degree of patient satisfaction is influenced by the quality of the basic pharmaceutical service offered, by the frequency of visits to the pharmacy, by the level of stress, and by social class.

The Influence of the Intergranular Superdisintegrant Performance on New Drotaverine Orodispersible Tablet Formulations.

The main objective of this study consists in establishing the influence of the intergranular superdisintegrant on the specific properties of drotaverine hydrochloride fast-dissolving granules (DROT-FDGs) and orodispersible tablets (DROT-ODTs). The orodispersible tablets were obtained by the compression of the FDGs and excipient mixture with an eccentric tableting machine. To develop DROT-ODTs, two types of superdisintegrant excipients in different concentrations (water-soluble soy polysaccharides (SSP) (1%, 5%) and water-insoluble soy polysaccharides-Emcosoy® STS IP (EMCS) (1%, 3%, 5%)) were used, resulting in five formulations (D1-D5). The DROT-FDGs and the DROT-ODTs were subjected to pharmacotechnical and analytical evaluation. All the orodispersible tablets obtained respect the quality requirements in terms of friability (less than 1%), crushing strength (ranging between 52 N for D2 and 125.5 N for D3), and disintegration time (<180 s). The in vitro release of drotaverine from ODTs showed that all formulations presented amounts of active substance released greater than 85% at 10 min. The main objective, developing 30 mg DROT-ODTs for children aged between 6 and 12 years by incorporating the API in FDGs, was successfully achieved.

Preparation and Evaluation of Caffeine Orodispersible Films: The Influence of Hydrotropic Substances and Film-Forming Agent Concentration on Film Properties.

This study aimed to develop caffeine (CAF) orodispersible films (ODFs) and verify the effects of different percentages of film-forming agent and hydrotropic substances (citric acid-CA or sodium benzoate-SB) on various film properties. Hydroxypropyl methylcellulose E 5 (HPMC E 5) orodispersible films were prepared using the solvent casting method. Four CAF-ODF formulations were prepared and coded as CAF1 (8% HPMC E 5, CAF), CAF2 (8% HPMC E 5 and CAF:CA-1:1), CAF3 (9% HPMC E 5 and CAF:CA-1:1), and CAF4 (9% HPMC E 5 and CAF:SB-1:1). The CAF-ODFs were evaluated in terms of disintegration time, folding endurance, thickness, uniformity of mass, CAF content, thickness-normalized tensile strength, adhesiveness, dissolution, and pH. Thin, opaque, and slightly white CAF-ODFs were obtained. All the formulations developed exhibited disintegration times less than 3 min. The dissolution test revealed that CAF1, CAF2, and CAF3 exhibited concentrations of active pharmaceutical ingredients (APIs) released at 30 min that were close to 100%, whilst CAF4 showed a faster dissolution behaviour (100% of the CAF was released at 5 min). Thin polymeric films containing 10 mg of CAF/surface area (3.14 cm2) were prepared.

Structural Characterization and Optimization of a Miconazole Oral Gel.

The development of semisolid formulations, gels in particular, has raised the attention of scientists more and more over the last decades. Because of their biocompatibility, hydrophilic nature, and capacity of absorbing large quantities of water, hydrogels are still one of the most promising pharmaceutical formulations in the pharmaceutical industry. The purpose of this study is to develop an optimal formulation capable of incorporating a water-poorly soluble active ingredient such as miconazole used in the treatment of fungal infections with Candida albicans and Candida parapsilosis. A D-optimal design was applied to study the relationship between the formulation parameter and the gel characteristics. The independent parameters used in this study were the Carbopol 940 concentration (the polymer used to obtain the gel matrix), the sodium hydroxide amount, and the presence/absence of miconazole. Ten different dependent parameters (Y1-Y10) were evaluated (penetrometry, spreadability, viscosity, and tangential tension at 1 and 11 levels of speed whilst destructuring and during the reorganization of the gel matrix). The consistency of the gels ranged from 23.2 mm (GO2) to 29.6 mm (GM5). The least spreadable gel was GO7 (1384 mm2), whilst the gel that presented the best spreadability was GO1 (3525 mm2). The viscosity and the tangential stress at the selected levels (1 and 11) varied due to the different compositions of the proposed gels. The gels were also tested for drug content and antifungal activity. All determinations had satisfying results; the drug content was within limits accepted by Ph. Eur. 10 and all formulations containing miconazole exhibited antifungal activity. An optimal formulation with miconazole was attained, consisting of 0.84% Carbopol 940 and 0.32% sodium hydroxide.

Development and Evaluation of Cannabidiol Orodispersible Tablets Using a 23-Factorial Design.

Orodispersible tablets (ODTs) are pharmaceutical formulations used to obtain fast therapeutic effects, usually recommended for geriatric and pediatric patients due to their improved compliance, bioavailability, ease of administration, and good palatability. This study aimed to develop ODTs with cannabidiol (CBD) phytocannabinoid extracted from Cannabis sativa used in the treatment of Lennox-Gastaut and Dravet syndromes. The tablets were obtained using an eccentric tableting machine and 9 mm punches. To develop CBD ODTs, the following parameters were varied: the Poloxamer 407 concentration (0 and 10%), the type of co-processed excipient (Prosolv® ODT G2-PODTG2 and Prosolv® EasyTab sp-PETsp), and the type of superdisintegrant (Croscarmellose-CCS, and Soy Polysaccharides-Emcosoy®-EMCS), resulting in eleven formulations (O1-O11). The following dependent parameters were evaluated: friability, disintegration time, crushing strength, and the CBD dissolution at 1, 3, 5, 10, 15, and 30 min. The dependent parameters were verified according to European Pharmacopoeia (Ph. Eur.) requirements. All the tablets obtained were in accordance with quality requirements in terms of friability (less than 1%), and disintegration time (less than 180 s). The crushing strength was between 19 N and 80 N. Regarding the dissolution test, only four formulations exhibited an amount of CBD released higher than 80% at 30 min. Taking into consideration the results obtained and using the Modde 13.1 software, an optimal formulation was developed (O12), which respected the quality criteria chosen (friability 0.23%, crushing strength of 37 N, a disintegration time of 27 s, and the target amount of CBD released in 30 min of 99.3 ± 6%).

Pharmacotechnical and analytical preformulation studies for cannabidiol orodispersible tablets.

Obtaining orodispersible tablets (ODT) containing substances from the second Biopharmaceutical Class has raised concerns as the dissolution test is challenging. This study aimed to select suitable excipients for developing orodispersible tablets containing cannabidiol (CBD) by direct compression method. No similar studies were found in the literature. Excipients from different classes were characterized using the SeDeM-ODT tool: fillers - lactose (LCT) and microcrystalline cellulose (CelMC), sweeteners - sorbitol (SRB) and mannitol (MNT), disintegrants - sodium starch glycolate (SSG), sodium croscarmellose (CCS), soy polysaccharides (Emcosoy® - EMCS) and two co-processed excipients (Prosolv®-ODT G2 - PODTG2 and Prosolv® EasyTab sp - PETsp). Drug compatibility with excipients in binary mixtures (1:1) was verified by Differential Scanning Calorimetry (DSC) and Fourier Transform-Infrared (FTIR) spectroscopy. Using the SeDeM-ODT expert system, the fillers and the co-processed excipients showed good properties regarding compressibility and disintegration behavior. Also, the DSC and FTIR results showed that small or no interactions between the CBD and the excipients took place.

Development of Dermal Films Containing Miconazole Nitrate.

This study aims to develop new antifungal dermal films based on their mechanical properties (elongation, adhesion, behaviour towards vapour moisture) and the in vitro availability of miconazole nitrate, used as a pharmaceutical active ingredient in various concentrations. The three polymeric films prepared were translucent or shiny, with the surface of 63.585 cm², 0.20⁻0.30 mm thickness, and content of miconazole nitrate of 3.931 or 15.726 mg·cm². The mechanical resistance and elongation tests demonstrated that the two films based on hydroxyethyl cellulose (HEC) polymer were more elastic than the one prepared with hydroxypropyl methylcellulose (HPMC). The vapour water absorption and vapour water loss capacity of the films revealed that the HPMC film did not dry very well in the process of preparation by the evaporation of the solvent technique, unlike the HEC films that jellified more evenly in water and had higher drying capacity at 40 °C. The in vitro availability of miconazole nitrate from dermal films was evaluated using the Franz diffusion cell method, through a synthetic membrane (Ø 25 mm × 0.45 µm) and acceptor media with pH 7.4 (phosphate buffer and sodium lauryl sulphate 0.045%), resulting a release rate of up to 70%.

Simultaneous determination of amoxicillin and clavulanic acid in pharmaceutical preparations by capillary zone electrophoresis

ABSTRACT Clavulanic acid enhances the antibacterial spectrum of amoxicillin by rendering most β-lactamase producing isolates susceptible to the drug. A fast, simple and efficient capillary electrophoresis method was developed for the simultaneous determination of amoxicillin and clavulanic acid from complex mixtures. Using a 25 mM sodium tetraborate as background electrolyte at a pH of 9.30, + 25 kV applied voltage, 25 °C system temperature, UV determination at 230 nm; we succeeded in simultaneous separation of amoxicillin and clavulanic acid in approximately 2 minutes. The analytical performance of the method was evaluated in terms of reproducibility, precision, accuracy, and linearity. The optimized analytical method was applied for the determination of the two analytes from combined commercial pharmaceutical preparations. This CE method is fast, inexpensive, efficient, and environmentally friendly when compared with the more frequently used high performance liquid chromatography methods described in the literature.

RESUMO O ácido clavulânico acentua o espectro antibacteriano de amoxicilina, tornando a maioria dos isolados produtores de β-lactamase sensíveis ao fármaco. Desenvolveu-se um método rápido, simples e eficiente de electroforese capilar (EC) para a determinação simultânea de amoxicilina e de ácido clavulânico a partir de misturas complexas. Usando tetraborato de sódio 25 mM como electrólito em pH de 9,30, voltagem aplicada de + 25 kV, em sistema a 25 ° C e determinação por UV a 230 nm, a foi bem-sucedida a separação simultânea de amoxicilina e ácido clavulânico em, aproximadamente, 2 minutos. O desempenho analítico do método foi avaliado em termos de reprodutibilidade, precisão, exatidão e linearidade. O método analítico otimizado foi aplicado para a determinação dos dois analitos em associação, a partir de preparações farmacêuticas comerciais. Este método de EC é rápido, barato, eficiente e ecologicamente correto, quando comparado aos métodos de cromatografia líquida de alta eficiência mais frequentemente descritos na literatura.

Study of the Electrophoretic Behavior of Cephalosporins by Capillary Zone Electrophoresis.

PURPOSE: The aim of the study was the characterization of the electrophoretic behavior of cephalosporins from different generation having different structural characteristics in order to develop a rapid, simple and efficient capillary electrophoretic method for their identification and simultaneous separation from complex mixtures. METHODS: Ten cephalosporin derivatives (cefaclor, cefadroxil, cefalexin, cefazolin, cefoxitin, cefuroxime, cefoperazone, cefotaxime, ceftazidime, ceftriaxone) were analyzed by capillary zone electrophoresis using different background electrolyte solutions at different pH values. Electrophoretic mobilities of the analytes were calculated, the influence of the electrophoretic parameteres on the separation was established and the analytical conditions were optimized. RESULTS: Taking into consideration their structural and chemical properties cephalosporins can be detected over a pH range between 6 and 10. The best results were obtained using a buffer solution containing 25 mM disodium hydrogenophosphate - 25 mM sodium dihydrogenophosphate, at a pH - 7.00, + 25 kV voltage at a temperature of 25 °C, UV detection at 210 nm. Using the optimized analytical conditions we achieved the simultaneous baseline separation for seven cephalosporins in less then 10 minutes. CONCLUSION: Using the described optimized electrophoretic procedures, capillary electrophoresis can be used for the identification and determination of cephalosporins in formulated pharmaceutical products and for their separation from complex mixtures.

Microparticulate drug delivery system containing tramadol hydrochloride for pain treatment.

UNLABELLED: The current trend of replacing conventional pharmaceutical forms is justified because most substances administered in this form give fluctuations of therapeutic concentrations and often outside the therapeutic range. In addition, these formulations offer a reduction in the dose or the number of administrations, thus increasing patient compliance. AIM: In the experiment, we developed an appropriate technology for the preparation of gelatin microspheres containing tramadol hydrochloride by emulsification/cross-linking method. MATERIALS AND METHODS: The formulated microspheres were characterized by product yield, size distribution, encapsulation efficiency and in vitro release of tramadol hydrochloride. Data obtained from in vitro release studies were fitted to various mathematical models to elucidate the transport mechanisms. The kinetic models used were zero-order, first-order, Higuchi Korsmeyer-Peppas and Hopfenberg. RESULTS: Spherical microspheres were obtained, with free-flowing properties. The entrapment efficiency of tramadol hydrochloride in microparticles was 79.91% and product yield -94.92%. As the microsphere size was increased, the entrapment efficiency increased. This was 67.56, 70.03, 79.91% for formulations MT80-250, MT8-500 and, MT250-500. High entrapment efficiency was observed for MT250-500 formulation. The gelatin microspheres had particle sizes ranging from 80 to 500 microm. The drug was released for a period of 12 hours with a maximum release of 96.02%. Of the three proposed formulations, MT250-500 presented desirable properties and optimal characteristics for the therapy of pain. Release of tramadol hydrochloridi was best fitted to Korsmeyer-Peppas equation because the Akaike Information Criterion had the lowest values for this kinetic model. CONCLUSIONS: These results suggest the opportunity to influence the therapeutic characteristics of gelatin microspheres to obtain a suitable drug delivery system for the oral administration of tramadol hydrochloride.

Development of a modified-release pellets formulation--with metoprolol tartrat and kinetic aspects of in vitro release.

AIM: The development of a new pellets formulation which is able to modulate the release of metoprolol tartrate, an active pharmaceutical ingredient very soluble in water and therefore very difficult to process. MATERIALS AND METHODS: Two types of different viscosity grade hydroxypropyl methylcellulose (Methocel K100; HPMC 15.000) and Eudragit NE30D are used as prolonged drug release agents, thus resulting in three formulations which have been prepared in form of pellets, in a conventional coating pan. The obtained pellets are characterized and compared in terms of: particles size distribution, drug loading efficiency, drug content and kinetic of in vitro drug release. RESULTS: Lower amounts of Eudragit NE30D (7.5%) determine more uniform size distributions of particles. Drug content and charging efficiency is higher in case of fractions ranging in size from 0.80 to 1.25 mm. The combination of HPMC 15000 with 10% Eudragit NE30D leads to a prolongation for a period of 11.5 hours of metoprolol tartrate release. Release kinetics analysis was performed by fitting the in vitro release profile with different kinetic models. CONCLUSIONS: It was developed a pellets formulation that release in vitro the metoprolol tartrate in an extended mode, with Korsmeyer-Peppas kinetic-type.

Development of new formulation and its evaluation by capillary electrophoresis of tablets containing tramadol hydrochloride and paracetamol.

CONTEXT: A quick and efficient method to eliminate pain is combining complementary action and substances with synergic effect. Such an association is the one between tramadol hydrochloride and paracetamol, in which the rapid reaction time of the paracetamol is combined with the long-term effect of the tramadol hydrochloride. OBJECTIVE: Our aim was to develop and characterize alternative tablet formulations containing tramadol hydrochloride 37.5 mg and paracetamol 325 mg with different excipients in different ratio, and also the development of a new electrophoretic method for the quantitative determination of the active substances. MATERIALS AND METHODS: The tablets were evaluated for physical characteristics (weight, thickness, diameter, mechanical strength, friability, disintegration time), drug content and dissolution following Ph.Eur.7 and USP 35 guidelines. A new capillary electrophoretic method was developed for the determination of the two active substances. RESULTS: Capillary electrophoresis proved to be an efficient method for the determination of drug content and also for the dissolution profile. The two substances were separated based on the differences between their own electrophoretic mobilities, and determined in UV at two different wavelengths. CONCLUSIONS: Tablet formulation proved to be a significant factor in quality of tramadol hydrochloride/paracetamol tablets, as considerable differences between tablets containing different excipients were found; while capillary electrophoresis can be considered a useful alternative for the quantitative determination of tramadol hydrochloride/paracetamol combinations.