Direct Production of Propene from the Thermolysis of Poly(ß-hydroxybutyrate) (PHB). An Experimental and DFT Investigation.

We demonstrate a synthetic route toward the production of propene directly from poly(ß-hydroxybutyrate) (PHB), the most common of a wide range of high-molecular-mass microbial polyhydroxyalkanoates. Propene, a major commercial hydrocarbon, was obtained from the depolymerization of PHB and subsequent decarboxylation of the crotonic acid monomer in good yields (up to 75 mol %). The energetics of PHB depolymerization and the gas-phase decarboxylation of crotonic acid were also studied using density functional theory (DFT). The average activation energy for the cleavage of the R'C(O)O-R linkage is calculated to be 163.9 ± 7.0 kJ mol(-1). Intramolecular, autoacceleration effects regarding the depolymerization of PHB, as suggested in some literature accounts, arising from the formation of crotonyl and carboxyl functional groups in the products could not be confirmed by the results of DFT and microkinetic modeling. DFT results, however, suggest that intermolecular catalysis involving terminal carboxyl groups may accelerate PHB depolymerization. Activation energies for this process were estimated to be about 20 kJ mol(-1) lower than that for the noncatalyzed ester cleavage, 144.3 ± 6.4 kJ mol(-1). DFT calculations predict the decarboxylation of crotonic acid to follow second-order kinetics with an activation energy of 147.5 ± 6.3 kJ mol(-1), consistent with that measured experimentally, 146.9 kJ mol(-1). Microkinetic modeling of the PHB to propene overall reaction predicts decarboxylation of crotonic acid to be the rate-limiting step, consistent with experimental observations. The results also indicate that improvements made to enhance the isomerization of crotonic acid to vinylacetic acid will improve the direct conversion of PHB to propene.

Bimolecular decomposition pathways for carboxylic acids of relevance to biofuels.

The bimolecular thermal reactions of carboxylic acids were studied using quantum mechanical molecular modeling. Previous work1 investigated the unimolecular decomposition of a variety of organic acids, including saturated, α,ß-unsaturated, and ß,γ-unsaturated acids, and showed that the type and position of the unsaturation resulted in unique branching ratios between dehydration and decarboxylation, [H2O]/[CO2]. In this work, the effect of bimolecular chemistry (water-acid and acid-acid) is considered with a representative of each acid class. In both cases, the strained 4-centered, unimolecular transition state, typical of most organic acids, is opened up to 6- or 8-centered bimolecular geometries. These larger structures lead to a reduction in the barrier heights (20-45%) of the thermal decomposition pathways for organic acids and an increase in the decomposition kinetics. In some cases, they even cause a shift in the branching ratio of the corresponding product slates.

Comparison of unimolecular decomposition pathways for carboxylic acids of relevance to biofuels.

Quantum mechanical molecular modeling is used [M06-2X/6-311++G(2df,p)] to compare activation energies and rate constants for unimolecular decomposition pathways of saturated and unsaturated carboxylic acids that are important in the production of biofuels and that are models for plant and algae-derived intermediates. Dehydration and decarboxylation reactions are considered. The barrier heights to decarboxylation and dehydration are similar in magnitude for saturated acids (∼71 kcal mol(-1)), with an approximate 1:1 [H2O]/[CO2] branching ratio over the temperature range studied (500-2000 K). α,ß-Unsaturation lowers the barrier to decarboxylation between 2.2 and 12.2 kcal mol(-1) while increasing the barriers to dehydration by ∼3 kcal mol(-1). The branching ratio, as a result, is an order of magnitude smaller, [H2O]/[CO2] = 0.07. For some α,ß-unsaturated acids, six-center transition states are available for dehydration, with barrier heights of ∼35.0 kcal mol(-1). The branching ratio for these acids can be as high as 370:1. ß,γ-Unsaturation results in a small lowering in the barrier height to decarboxylation (∼70.0 kcal mol(-1)). ß,γ-Unsaturation also leads to a lowering in the dehydration pathway from 1.7 to 5.1 kcal mol(-1). These results are discussed with respect to predicted kinetic values for acids of importance in biofuels production.

HNO3-NHx, H2SO4-NHx, CH(O)OH-NHx, and CH3C(O)OH-NHx complexes and their role in the formation of condensation nuclei.

The formation of sulfuric acid (H(2)SO(4)), nitric acid (HNO(3)), acetic acid (CH(3)C(O)OH), and formic acid (HC(O))H) complexes with ammonia (NH(3)), amidogen radical (NH(2)), and imidogen radical (NH) was studied using natural bond orbital calculations. The equilibrium structures, binding energies, and harmonic frequencies were calculated for each acid-NH(x) complex using hybrid density functional (B3LYP) and second-order Møller-Plesset perturbation approximation methods with the 6-311++G(3df,3pd) basis set. The results presented here suggest that the effect of NH(2) on the formation of new condensation nuclei will be similar to that of NH(3), but to a lesser degree and confined primarily to complexes with H(2)SO(4) and HNO(3). The NH radical is not expected to play a significant role in the formation of new atmospheric condensation nuclei.

Temperature-dependent rate coefficients and theoretical calculations for the OH+Cl2O reaction.

Rate coefficients k for the OH+Cl(2)O reaction are measured as a function of temperature (230-370 K) and pressure by using pulsed laser photolysis to produce OH radicals and laser-induced fluorescence to monitor their loss under pseudo-first-order conditions in OH. The reaction rate coefficient is found to be independent of pressure, within the precision of our measurements at 30-100 Torr (He) and 100 Torr (N(2)). The rate coefficients obtained at 100 Torr (He) showed a negative temperature dependence with a weak non-Arrhenius behavior. A room-temperature rate coefficient of k(1)(297 K)=(7.5±1.1)×10(-12) cm(3) molecule(-1) s(-1) is obtained, where the quoted uncertainties are 2σ and include estimated systematic errors. Theoretical methods are used to examine OH···OCl(2) and OH···ClOCl adduct formation and the potential-energy surfaces leading to the HOCl+ClO (1a) and Cl+HOOCl (1d) products in reaction (1) at the hybrid density functional UMPW1K/6-311++G(2df,p) level of theory. The OH···OCl(2) and OH···ClOCl adducts are found to have binding energies of about 0.2 kcal mol(-1). The reaction is calculated to proceed through weak pre-reactive complexes. Transition-state energies for channels (1a) and (1d) are calculated to be about 1.4 and about 3.3 kcal mol(-1) above the energy of the reactants. The results from the present study are compared with previously reported rate coefficients, and the interpretation of the possible non-Arrhenius behavior is discussed.

Computational study of isoprene hydroxyalkyl peroxy radical-water complexes (C5H8(OH)O2-H2O).

Herein we report an extensive ab initio study on the existence of eight beta-hydroxy isoprene peroxy radical-water complexes. Binding energies calculated at the MP2(full)/6-311++G(2d,2p)//CCSD(T)/6-311++G(d,p) level of theory range between 3.85 and 5.66 kcal mol(-1). The results of natural bond orbital calculations are presented to help rationalize complex formation. Atmospheric lifetimes, equilibrium constants, heats of formation, and the relative abundance of complexed to uncomplexed peroxy radicals are also reported and discussed.

Semicontinuous PM2.5 and PM10 mass and composition measurements in Lindon, Utah, during winter 2007.

The U.S. Environmental Protection Agency is promoting the development and application of sampling methods for the semicontinuous determination of fine particulate matter (PM2.5, particles with an aerodynamic diameter <2.5 microm) mass and chemical composition. Data obtained with these methods will significantly improve the understanding of the primary sources, chemical conversion processes, and meteorological atmospheric processes that lead to observed PM2.5 concentrations and will aid in the understanding of the etiology of PM2.5-related health effects. During January and February 2007, several semicontinuous particulate matter (PM) monitoring systems were compared at the Utah State Lindon Air Quality Sampling site. Semicontinuous monitors included instruments to measure total PM2.5 mass (filter dynamic measurement system [FDMS] tapered element oscillating microbalance [TEOM], GRIMM), nonvolatile PM2.5 mass (TEOM), sulfate and nitrate (two PM2.5 and one PM10 [PM with an aerodynamic diameter <10 microm] ion-chromatographic-based samplers), and black carbon (aethalometer). PM10 semicontinuous mass measurements were made with GRIMM and TEOM instruments. These measurements were all made on a 1-hr average basis. Source apportionment analysis indicated that sources impacting the site were mainly urban sources and included mobile sources (gasoline and diesel) and residential burning of wood, with some elevated concentrations because of the effect of winter inversions. The FDMS TEOM and GRIMM instruments were in good agreement, but TEOM monitor measurements were low because of the presence of significant semi-volatile material. Semi-volatile mass was present dominantly in the PM2.5 mass.

Computational study on the existence of organic peroxy radical-water complexes (RO2.H2O).

The existence of a series of organic peroxy radical-water complexes [CH3O2.H2O (methyl peroxy); CH3CH2O2.H2O (ethyl peroxy); CH3C(O)O2.H2O (acetyl peroxy); CH3C(O)CH2O2.H2O (acetonyl peroxy); CH2(OH)O2.H2O (hydroxyl methyl peroxy); CH2(OH)CH2O2.H2O (2-hydroxy ethyl peroxy); CH2(F)O2.H2O (fluoro methyl peroxy); CH2(F)CH2O2.H2O (2-fluoro ethyl peroxy)] is evaluated using high level ab initio calculations. A wide range of binding energies is predicted for these complexes, in which the difference in binding energies can be explained by examination of the composition of the R group attached to the peroxy moiety. The general trend in binding energies has been determined to be as follows: fluorine approximately alkyl < carbonyl < alcohol. The weakest bound complex, CH3O2.H2O, is calculated to be bound by 2.3 kcal mol-1, and the strongest, the CH2(OH)O2.H2O complex, is bound by 5.1 kcal mol-1. The binding energy of the peroxy radical-water complexes which contain carbonyl and alcohol groups indicates that these complexes may perturb the kinetics and product branching ratios of reactions involving these complexes.