Structural investigations into colour-tuneable fluorescent InZnP-based quantum dots from zinc carboxylate and aminophosphine precursors.

Fluorescent InP-based quantum dots have emerged as valuable nanomaterials for display technologies, biological imaging, and optoelectronic applications. The inclusion of zinc can enhance both their emissive and structural properties and reduce interfacial defects with ZnS or CdS shells. However, the sub-particle distribution of zinc and the role this element plays often remains unclear, and it has previously proved challenging to synthesise Zn-alloyed InP-based nanoparticles using aminophosphine precursors. In this report, we describe the synthesis of alloyed InZnP using zinc carboxylates, achieving colour-tuneable fluorescence from the unshelled core materials, followed by a one-pot ZnS or CdS deposition using diethyldithiocarbamate precursors. Structural analysis revealed that the "core/shell" particles synthesised here were more accurately described as homogeneous extended alloys with the constituent shell elements diffusing through the entire core, including full-depth inclusion of zinc.

A Versatile Approach to Electrochemical In Situ Ambient-Pressure X-ray Photoelectron Spectroscopy: Application to a Complex Model Catalyst.

We present a new technique for investigating complex model electrocatalysts by means of electrochemical in situ ambient-pressure X-ray photoelectron spectroscopy (AP-XPS). Using a specially designed miniature capillary device, we prepared a three-electrode electrochemical cell in a thin-layer configuration and analyzed the active electrode/electrolyte interface by using "tender" X-ray synchrotron radiation. We demonstrate the potential of this versatile method by investigating a complex model electrocatalyst. Specifically, we monitored the oxidation state of Pd nanoparticles supported on an ordered Co3O4(111) film on Ir(100) in an alkaline electrolyte under potential control. We found that the Pd oxide formed in the in situ experiment differs drastically from the one observed in an ex situ emersion experiment at similar potential. We attribute these differences to the decomposition of a labile palladium oxide/hydroxide species after emersion. Our experiment demonstrates the potential of our approach and the importance of electrochemical in situ AP-XPS for studying complex electrocatalytic interfaces.

Quantification of the Activator and Sensitizer Ion Distributions in NaYF4 :Yb3+ , Er3+ Upconverting Nanoparticles Via Depth-Profiling with Tender X-Ray Photoemission.

The spatial distribution and concentration of lanthanide activator and sensitizer dopant ions are of key importance for the luminescence color and efficiency of upconverting nanoparticles (UCNPs). Quantifying dopant ion distributions and intermixing, and correlating them with synthesis methods require suitable analytical techniques. Here, X-ray photoelectron spectroscopy depth-profiling with tender X-rays (2000-6000 eV), providing probe depths ideally matched to UCNP sizes, is used to measure the depth-dependent concentration ratios of Er3+ to Yb3+ , [Er3+ ]/[Yb3+ ], in three types of UCNPs prepared using different reagents and synthesis methods. This is combined with data simulations and inductively coupled plasma-optical emission spectroscopy (ICP-OES) measurements of the lanthanide ion concentrations to construct models of the UCNPs' dopant ion distributions. The UCNP sizes and architectures are chosen to demonstrate the potential of this approach. Core-only UCNPs synthesized with XCl3 ·6H2 O precursors (ß-phase) exhibit a homogeneous distribution of lanthanide ions, but a slightly surface-enhanced [Er3+ ]/[Yb3+ ] is observed for UCNPs prepared with trifluroacetate precursors (α-phase). Examination of Yb-core@Er-shell UCNPs reveals a co-doped, intermixed region between the single-doped core and shell. The impact of these different dopant ion distributions on the UCNP's optical properties is discussed to highlight their importance for UCNP functionality and the design of efficient UCNPs.

Surface band bending and carrier dynamics in colloidal quantum dot solids.

Band bending in colloidal quantum dot (CQD) solids has become important in driving charge carriers through devices. This is typically a result of band alignments at junctions in the device. Whether band bending is intrinsic to CQD solids, i.e. is band bending present at the surface-vacuum interface, has previously been unanswered. Here we use photoemission surface photovoltage measurements to show that depletion regions are present at the surface of n and p-type CQD solids with various ligand treatments (EDT, MPA, PbI2, MAI/PbI2). Using laser-pump photoemission-probe time-resolved measurements, we show that the timescale of carrier dynamics in the surface of CQD solids can vary over at least 6 orders of magnitude, with the fastest dynamics on the order of microseconds in PbS-MAI/PbI2 solids and on the order of seconds for PbS-MPA and PbS-PbI2. By investigating the surface chemistry of the solids, we find a correlation between the carrier dynamics timescales and the presence of oxygen contaminants, which we suggest are responsible for the slower dynamics due to deep trap formation.

Surface and Interface Chemistry in Colloidal Quantum Dots for Solar Applications Studied by X-Ray Photoelectron Spectroscopy.

Control of the surface and interface chemistry of colloidal quantum dots (CQDs) is critical to achieving a product with good air stability and high performing optoelectronic devices. Through various surface passivation treatments, vast improvements have been made in fields such as CQD photovoltaics; however devices have not currently reached commercial standards. We show how X-ray photoelectron spectroscopy (XPS) can provide a better understanding of exactly how surface treatments act on CQD surfaces, and the effect of surface composition on air stability and device performance.. We illustrate this with PbS-based CQDs, using XPS to measure oxidation processes, and to quantify the composition of the topmost surface layer after different surface treatments. We also demonstrate the use of synchrotron radiation-excited depth-profiling XPS, a powerful technique for determining the surface composition, chemistry and structure of CQDs. This review describes our recent progress in characterization of CQD surfaces using SR-excited depth profiling XPS and other photoemission techniques.

Influence of Multistep Surface Passivation on the Performance of PbS Colloidal Quantum Dot Solar Cells.

The performance of devices containing colloidal quantum dot (CQD) films is strongly dependent on the surface chemistry of the CQDs they contain. Multistep surface treatments, which combine two or more strategies, are important for creating films with high carrier mobility that are well passivated against trap states and oxidation. Here, we examine the effect of a number of these surface treatments on PbS CQD films, including cation exchange to form PbS/CdS core/shell CQDs, and solid-state ligand-exchange treatments with Cl, Br, I, and 1,2-ethanedithiol (EDT) ligands. Using laboratory-based and synchrotron-radiation-excited X-ray photoelectron spectroscopy (XPS), we examine the compositions of the surface layer before and after treatment, and correlate this with the performance data and stability in air. We find that halide ion treatments may etch the CQD surfaces, with detrimental effects on the air stability and solar cell device performance caused by a reduction in the proportion of passivated surface sites. We show that films made up of PbS/CdS CQDs are particularly prone to this, suggesting Cd is more easily etched from the surface than Pb. However, by choosing a less aggressive ligand treatment, a good coverage of passivators on the surface can be achieved. We show that halide anions bind preferentially to surface Pb (rather than Cd). By isolating the part of XPS signal originating from the topmost surface layer of the CQD, we show that air stability is correlated with the total number of passivating agents (halide + EDT + Cd) at the surface.

The passivating effect of cadmium in PbS/CdS colloidal quantum dots probed by nm-scale depth profiling.

Achieving control of the surface chemistry of colloidal quantum dots (CQDs) is essential to fully exploit their properties in solar cells, but direct measurement of the chemistry and electronic structure in the outermost atomic layers is challenging. Here we probe the surface oxidation and passivation of cation-exchanged PbS/CdS core/shell CQDs with sub nm-scale precision using synchrotron-radiation-excited depth-profiling photoemission. We investigate the surface composition of the topmost 1-2.5 nm of the CQDs as a function of depth, for CQDs of varying CdS shell thickness, and examine how the surface changes after prolonged air exposure. We demonstrate that the Cd is localized at the surface of the CQDs. The surface-localized products of oxidation are identified, and the extent of oxidation quantified. We show that oxidised sulfur species are progressively eliminated as Cd replaces Pb at the surface. A sub-monolayer surface 'decoration' of Cd is found to be effective in passivating the CQDs. We show that the measured energy-level alignments at PbS/CdS colloidal quantum dot surfaces differ from those expected on the basis of bulk band offsets, and are strongly affected by the oxidation products. We develop a model for the passivating action of Cd. The optimum shell thickness (of around 0.1 nm, previously found to give maximised power conversion efficiency in PbS/CdS solar cells) is found to correspond to a trade-off between the rate of oxidation and the introduction of a surface barrier to charge transport.