A case study on integrating anaerobic digestion into agricultural activities in British Columbia: Environmental, economic and policy analysis.

This paper provides an example of the kind of analysis needed to support better targeted policies to reduce the environmental impacts of agricultural activities, using the specific case of Anaerobic Digestion (AD) to treat animal manure and other agricultural and food wastes in British Columbia (BC). Economic and life cycle environmental performance metrics are estimated to compare integrated and stand-alone systems using the resulting biogas and digestate. Using biogas for heating outperforms purifying it for distribution as renewable natural gas (RNG). However, current policy and energy prices in BC perversely support RNG, making biogas-fired heating systems economically unattractive. The performance of biogas-fired heating system can be improved and their dependence on subsidies reduced by integration with local agricultural activities, exploiting CO2 and digestate as by-products. Biogenic CO2, from combustion of the biogas and from mushroom cultivation, can displace natural gas use in producing CO2-enriched atmospheres to enhance growth rates in greenhouse production. Using digestate as growing media in greenhouses and mushroom cultivation can generate significant revenues but the environmental benefits are nugatory. Co-digestion of food waste can further improve performance by increasing biogas yield. With all extra benefits combined, integrated AD systems can increase both GHG mitigation and revenues by at least 80%. The analysis illustrates the general point that, to avoid perverse outcomes, policy measures must support options based on their actual GHG mitigation benefits, rather than targetting any specific technology.

Radiological impacts in Life Cycle Assessment - Part II: Comparison of methodologies.

In a complementary article, an overarching framework was proposed to include radiological impacts in Life Cycle Impact Assessment (LCIA). Two methodologies were derived embodying the framework: the Critical Group Methodology (CGM), adapted from the approach commonly used in Human and Environmental Risk Assessment (HERA), and UCrad, based on the compartment modelling approach commonly used in LCIA. In this paper, characterisation factors obtained by the two methodologies are compared in detail to investigate the consequences of the different approaches to fate modelling and the sensitivity of the characterisation factors to the radionuclides' half-life. Characterisation factors from the CGM methodology are strongly affected by radioactive decay at low half-life and by dilution at large distances. Conversely, UCrad factors are not affected by dilution and are affected less than CGM by radioactive decay. It is concluded that UCrad is more appropriate than CGM for LCA because it is consistent with the general approach used in LCIA. However, CGM can be used alongside UCrad to make recommendations on the location and scale of specific processes emitting radionuclides.

Radiological impacts in Life Cycle Assessment. Part I: General framework and two practical methodologies.

To date, impacts of ionising radiations have been largely disregarded in Life Cycle Assessment (LCA). This omission can be linked to the lack of a standard and comprehensive framework for including the effects of radionuclides alongside other emissions from industrial processes. Drawing on a recent review of Radiological Impact Assessment methodologies for LCA studies, this article proposes an overarching framework for integrating impacts of radionuclides in the Impact Assessment phase of LCA. From this framework, two alternative methodologies have been derived. They differ mainly in the way transport and dispersion of radionuclides in the environment are modelled: UCrad represents the first-of-its-kind compartment-type methodology for radionuclides, whereas the alternative Critical Group Methodology (CGM) has been adapted from standard Risk Assessment practices. Characterisation factors for a range of emitted species have been calculated using both methodologies and compared with those obtained from the Human Health Damages methodology, which is the only approach to radiological impacts yet implemented in LCA. For both UCrad and CGM the results are in general agreement with the Human Health Damages methodology, but UCrad gives factors closer to those obtained by the CGM approach. UCrad represents a major step towards incorporating ionising radiation impacts in LCIA. A subsequent paper will explore quantitatively the main differences between the UCrad and CGM methodologies.

Data supporting UCrad and CGM, two novel methodologies for radiological impacts in Life Cycle Assessment.

Radiological impacts are often disregarded in Life Cycle Assessment (LCA) due to the lack of a standard and comprehensive framework for including the impacts of radionuclides alongside other emissions from industrial processes. This data article is related to the research articles "Radiological Impacts in Life Cycle Assessment. Part I: General framework and two practical methodologies" [1] and "Radiological Impacts in Life Cycle Assessment. Part II: Comparison of Methodologies" [2], which introduced two practical methodologies for assessing the radiological impacts in LCA; these are UCrad and the Critical Group Methodology (CGM). This article reports the characterisation factors, for routine direct discharges and releases from nuclear waste disposed in a geological disposal facility, obtained from both methodologies. The article also reports the underlying data supporting the methodologies and the analysis carried out in the related research articles.

A life cycle assessment of distributed energy production from organic waste: Two case studies in Europe.

By means of the life cycle assessment methodology, the purpose of this study is to assess the environmental impact when biomethane from organic waste produced at residential level is used to supply energy to a group of dwellings in the distributed generation paradigm. Three different Combined Heat and Power systems, such as fuel cells, Stirling engine and micro gas turbine, installed at household level are assessed in two different settings: one in Northern Europe (UK) and one in Southern Europe (Italy). Different operating strategies are investigated for each technology. Moreover, marginal electricity production technologies are analysed to assess their influence on the results. This study has demonstrated that the type of bio-methane fed micro-CHP technology employed has a significantly different environmental impact: fuel cells are the most environmentally friendly solution in every category analysed; Stirling engines, although can supply heat to the largest number of dwellings are the least environmentally friendly technology. However, key factors investigated in the model presented in this paper influence the decision making on the type of technology adopted and the operating strategy to be implemented.

Comparison of phosphorus recovery from incinerated sewage sludge ash (ISSA) and pyrolysed sewage sludge char (PSSC).

This research compares and contrasts the physical and chemical characteristics of incinerator sewage sludge ash (ISSA) and pyrolysis sewage sludge char (PSSC) for the purposes of recovering phosphorus as a P-rich fertiliser. Interest in P recovery from PSSC is likely to increase as pyrolysis is becoming viewed as a more economical method of sewage sludge thermal treatment compared to incineration. The P contents of ISSA and PSSC are 7.2-7.5% and 5.6%, respectively. Relative to the sludge, P concentrations are increased about 8-fold in ISSA, compared to roughly 3-fold in PSSC. Both PSSC and ISSA contain whitlockite, an unusual form of calcium phosphate, with PSSC containing more whitlockite than ISSA. Acid leaching experiments indicate that a liquid/solid ratio of 10 with 30min contact time is optimal to release PO4-P into leachate for both ISSA and PSSC. The proportion of P extracted from PSSC is higher due to its higher whitlockite content. Heavy metals are less soluble from PSSC because they are more strongly incorporated in the particles. The results suggest there is potential for the development of a process to recover P from PSSC.

Integrated gasification and plasma cleaning for waste treatment: A life cycle perspective.

In the past, almost all residual municipal waste in the UK was landfilled without treatment. Recent European waste management directives have promoted the uptake of more sustainable treatment technologies, especially for biodegradable waste. Local authorities have started considering other options for dealing with residual waste. In this study, a life cycle assessment of a future 20MWe plant using an advanced two-stage gasification and plasma technology is undertaken. This plant can thermally treat waste feedstocks with different composition and heating value to produce electricity, steam and a vitrified product. The objective of the study is to analyse the environmental impacts of the process when fed with seven different feedstocks (including municipal solid waste, solid refuse fuel, reuse-derived fuel, wood biomass and commercial & industrial waste) and identify the process steps which contribute more to the environmental burden. A scenario analysis on key processes, such as oxygen production technology, metal recovery and the appropriate choice for the secondary market aggregate material, is performed. The influence of accounting for the biogenic carbon content in the waste from the calculations of the global warming potential is also shown. Results show that the treatment of the refuse-derived fuel has the lowest impact in terms of both global warming potential and acidification potential because of its high heating value. For all the other impact categories analysed, the two-stage gasification and plasma process shows a negative impact for all the waste streams considered, mainly due to the avoided burdens associated with the production of electricity from the plant. The plasma convertor, key characteristic of the thermal process investigated, although utilising electricity shows a relatively small contribution to the overall environmental impact of the plant. The results do not significantly vary in the scenario analysis. Accounting for biogenic carbon enhanced the performance of biomass and refuse-derived fuel in terms of global warming potential. The main analysis of this study has been performed from a waste management perspective, using 1ton of waste as functional unit. A comparison of the results when 1kWhe of electricity produced is used as functional unit shows similar trends for the environmental impact categories considered.

Life cycle assessment of energy from waste via anaerobic digestion: a UK case study.

Particularly in the UK, there is potential for use of large-scale anaerobic digestion (AD) plants to treat food waste, possibly along with other organic wastes, to produce biogas. This paper presents the results of a life cycle assessment to compare the environmental impacts of AD with energy and organic fertiliser production against two alternative approaches: incineration with energy production by CHP and landfill with electricity production. In particular the paper investigates the dependency of the results on some specific assumptions and key process parameters. The input Life Cycle Inventory data are specific to the Greater London area, UK. Anaerobic digestion emerges as the best treatment option in terms of total CO2 and total SO2 saved, when energy and organic fertiliser substitute non-renewable electricity, heat and inorganic fertiliser. For photochemical ozone and nutrient enrichment potentials, AD is the second option while incineration is shown to be the most environmentally friendly solution. The robustness of the model is investigated with a sensitivity analysis. The most critical assumption concerns the quantity and quality of the energy substituted by the biogas production. Two key issues affect the development and deployment of future anaerobic digestion plants: maximising the electricity produced by the CHP unit fuelled by biogas and to defining the future energy scenario in which the plant will be embedded.

A Life Cycle Assessment of integrated dairy farm-greenhouse systems in British Columbia.

The purpose of this study was to evaluate the anticipated environmental benefits from integrating a dairy farm and a greenhouse; the integration is based on anaerobic digestion of manures to produce biogas energy, biogenic CO2, and digested slurry. A full Life Cycle Assessment (LCA) has been conducted on six modeled cases applicable in British Columbia, to evaluate non-renewable energy consumption, climate change, acidification, eutrophication, respiratory effects and human toxicity. Compared to conventional practice, an integrated system has the potential to nearly halve eutrophication and respiratory effects caused by inorganic emissions and to reduce non-renewable energy consumption, climate change, and acidification by 65-90%, while respiratory effects caused by organic emissions become negative as co-products substitute for other materials. Co-digestion of other livestock manures, greenhouse plant waste, or food and food processing waste with dairy manure can further improve the performance of the integrated system.

Including carbon emissions from deforestation in the carbon footprint of Brazilian beef.

Effects of land use changes are starting to be included in estimates of life-cycle greenhouse gas (GHG) emissions, so-called carbon footprints (CFs), from food production. Their omission can lead to serious underestimates, particularly for meat. Here we estimate emissions from the conversion of forest to pasture in the Legal Amazon Region (LAR) of Brazil and present a model to distribute the emissions from deforestation over products and time subsequent to the land use change. Expansion of cattle ranching for beef production is a major cause of deforestation in the LAR. The carbon footprint of beef produced on newly deforested land is estimated at more than 700 kg CO(2)-equivalents per kg carcass weight if direct land use emissions are annualized over 20 years. This is orders of magnitude larger than the figure for beef production on established pasture on non-deforested land. While Brazilian beef exports have originated mainly from areas outside the LAR, i.e. from regions not subject to recent deforestation, we argue that increased production for export has been the key driver of the pasture expansion and deforestation in the LAR during the past decade and this should be reflected in the carbon footprint attributed to beef exports. We conclude that carbon footprint standards must include the more extended effects of land use changes to avoid giving misleading information to policy makers, retailers, and consumers.