A systematic review of pharmaceutical and personal care products as emerging contaminants in waters: The panorama of West Africa.

Pharmaceutical and Personal Care Products (PPCPs) are widely used to prevent or treat human and animal diseases, thereby improving the quality of daily life. Poor management of post-consumer products is recognized worldwide, as they negatively affect the ecosystems where they are discharged. The first action to prevent negative impacts is the state of knowledge regarding their occurrence. This paper critically reports the panorama of West Africa in terms of PPCPs occurrence in different water sources. To achieve this objective, a systematic review was conducted on PPCPs in West Africa following the PRISMA guidelines. Databases, including African Journals Online, PubMed, Google Scholar, Scopus, and Dimensions, were used for this search. Thirty-five articles, representing 58 % of West African countries, were selected according to the inclusion and exclusion criteria. Of these articles, one included data from multiple West African countries, while the remaining 34 exclusively focused on Benin, Cameroon, Ghana, and Nigeria. The results revealed a variety of PPCPs investigated, about 27 groups and 112 compounds, with greater emphasis on antibiotics, analgesics and PSHXEs. HPLC was the predominant analytical method used, resulting in total concentrations of PPCPs in the range of 200,000 to 3,200,000 ng/L in drinking water, 12 to 700,000 ng/L in groundwater, 0.42 to 107,800,000 ng/L in surface water, 8.5 to 121,310,000 ng/L in wastewater, and 440 to 421,700 ng/L in tap water. Ghana, Nigeria and Cameroon reported the highest number of PPCPs investigated and consequently the highest concentration of cases. These compounds present a high potential ecological risk, with >50 % exceeding the risk quotient limit. Therefore, West Africa as a community needs integrated approaches and strategies to monitor water, especially transboundary resources. This review is timely and provides pertinent information to policymakers and researchers on PPCPs in water.

Quantification and health risk assessment of heavy metals in milled maize and millet in the Tolon District, Northern Ghana.

This study was conducted to quantify the levels and measure the health risk of selected heavy metals (Fe, Zn, Pb, Mn, Cr, Ni) in milled millet and maize from 10 communities in the Tolon District, northern region of Ghana. Control samples of maize and millet were also prepared in order to identify whether the sources of the heavy metals were limited to the milling process or otherwise. The heavy metals present in the collected milled samples were quantified using an AAS Varian Spectra 220 FS. The average concentrations of the selected heavy metals in the milled maize samples were the following: Fe = 1.3392 ± 0.4341 mg/kg, Ni = 0.9502 ± 0.2696 mg/kg, Pb = 2.2177 ± 0.0534 mg/kg, Cr = 0.4359 ± 0.3574 mg/kg, Zn = 0.6809 ± 0.0534 mg/kg, and Mn = 0.3550 ± 0.1042 mg/kg. Milled millet samples recorded mean concentration of the heavy metals as Fe = 1.9467 ± 1.0597 mg/kg, Ni = 0.9520 ± 0.1218 mg/kg, Pb = 2.2780 ± 0.0221 mg/kg, Cr = 0.3421 ± 0.1498 mg/kg, Zn = 0.8540 ± 0.1139 mg/kg, and Mn = 0.4241 ± 0.0859 mg/kg. All selected heavy metals concentrations were below standards in food except Pb. Locally made mill plates were found to leach heavy metals in the milled flours due to the direct contact of the grains with the mill plates. However, the comparison of milled to pounded flour (control samples) indicated other potential sources of heavy metals aside from the disk attrition mill. The health risk assessment revealed no potential hazards nor cancer risk in both children and adults.

Microbial quality and antibiotic sensitivity of bacterial isolates in "Tuo-Zaafi" vended in the central business district of tamale.

INTRODUCTION: Food safety concerns remain a challenge across nations and among citizens. Microbial contamination of foods and antibiotic resistance constitutes a global threat to food security. The present study assessed microbial quality of "Tuo-Zaafi" sold in the Tamale metropolis as well as antibiotic resistance of isolates from these products. RESULTS: Samples were collected aseptically and transported to the Spanish laboratory complex of the University for Development Studies, Ghana, for microbial analysis. E. coli which recorded the highest occurrence was detected in 50% of the T.Z samples with bacterial loads ranging from < 100 to 2.3 × 106 cfu/g (4.49 × 105 ± 5.72 × 104 cfu/g). Salmonella spp and Staphylococcus aureus recorded the least occurrence representing 33.3%. There were significant differences in the levels of E. coli, Shigella spp, Salmonella spp, and Staphylococcus aureus (p < .001) across the four zones demarcated. Results of the antibiotic test revealed higher resistance to the antibiotics employed in the present study (81%). Susceptibility of microbes to ciprofloxacin (100%) was the highest, and higher resistance to gentamycin (100%) was observed in this study. CONCLUSION: The study revealed that T.Z sold in the business district of Tamale could constitute a likely health risk to consumers especially when it is consumed in a cold state. It is hereby recommended that the Food and Drugs Authority (FDA) should enforce food hygiene laws and ensure strict adherence.

A review of toxicity and mechanisms of individual and mixtures of heavy metals in the environment.

The rational for the study was to review the literature on the toxicity and corresponding mechanisms associated with lead (Pb), mercury (Hg), cadmium (Cd), and arsenic (As), individually and as mixtures, in the environment. Heavy metals are ubiquitous and generally persist in the environment, enabling them to biomagnify in the food chain. Living systems most often interact with a cocktail of heavy metals in the environment. Heavy metal exposure to biological systems may lead to oxidation stress which may induce DNA damage, protein modification, lipid peroxidation, and others. In this review, the major mechanism associated with toxicities of individual metals was the generation of reactive oxygen species (ROS). Additionally, toxicities were expressed through depletion of glutathione and bonding to sulfhydryl groups of proteins. Interestingly, a metal like Pb becomes toxic to organisms through the depletion of antioxidants while Cd indirectly generates ROS by its ability to replace iron and copper. ROS generated through exposure to arsenic were associated with many modes of action, and heavy metal mixtures were found to have varied effects on organisms. Many models based on concentration addition (CA) and independent action (IA) have been introduced to help predict toxicities and mechanisms associated with metal mixtures. An integrated model which combines CA and IA was further proposed for evaluating toxicities of non-interactive mixtures. In cases where there are molecular interactions, the toxicogenomic approach was used to predict toxicities. The high-throughput toxicogenomics combines studies in genetics, genome-scale expression, cell and tissue expression, metabolite profiling, and bioinformatics.

Human Health Risk Assessment of Artisanal Miners Exposed to Toxic Chemicals in Water and Sediments in the Prestea Huni Valley District of Ghana.

A human health risk assessment of artisanal miners exposed to toxic metals in water bodies and sediments in the PresteaHuni Valley District of Ghana was carried out in this study, in line with US EPA risk assessment guidelines. A total of 70 water and 30 sediment samples were collected from surface water bodies in areas impacted by the operations of artisanal small-scale gold mines in the study area and analyzed for physico-chemical parameters such as pH, TDS, conductivity, turbidity as well as metals and metalloids such as As, Cd, Hg and Pb at CSIR-Water Research Institute using standard methods for the examination of wastewater as outlined by American Water Works Association (AWWA). The mean concentrations of As, Cd, Hg and Pb in water samples ranged from 15 µg/L to 325 µg/L (As), 0.17 µg/L to 340 µg/L (Cd), 0.17 µg/L to 122 µg/L (Pb) and 132 µg/L to 866 µg/L (Hg), respectively. These measured concentrations of arsenic (As), mercury (Hg), cadmium (Cd) and lead (Pb) were used as input parameters to calculate the cancer and non-cancer health risks from exposure to these metals in surface water bodies and sediments based on an occupational exposure scenario using central tendency exposure (CTE) and reasonable maximum exposure (RME) parameters. The results of the non-cancer human health risk assessment for small-scale miners working around river Anikoko expressed in terms of hazard quotients based on CTE parameters are as follows: 0.04 (Cd), 1.45 (Pb), 4.60 (Hg) and 1.98 (As); while cancer health risk faced by ASGM miners in Dumase exposed to As in River Mansi via oral ingestion of water is 3.1 × 10(-3). The hazard quotient results obtained from this study in most cases were above the HQ guidance value of 1.0, furthermore the cancer health risk results were found to be higher than the USEPA guidance value of 1 × 10(-4) to 1 × 10(-6). These findings call for case-control epidemiological studies to establish the relationship between exposure to the aforementioned toxic chemicals and diseases associated with them as identified in other studies conducted in different countries as basis for developing policy interventions to address the issue of ASGM mine workers safety in Ghana.

Adsorption properties of macroporous adsorbent resins for separation of anthocyanins from mulberry.

In this study, the adsorption/desorption characteristics of mulberry anthocyanins (MA) on five types of macroporous resins (XAD-7HP, AB-8, HP-20, D-101 and X-5) were evaluated, XAD-7HP and AB-8 showed higher adsorption/desorption capacities. On the basis of static adsorption test, XAD-7HP and AB-8 resins were selected for kinetics, isotherms and thermodynamics. The adsorption mechanism indicated that the process was better explained by pseudo-first-order kinetics and the Langmuir isotherm model, and the thermodynamics tests showed that the processes were exothermic, spontaneous and thermodynamically feasible. Dynamic tests were performed on a column packed with XAD-7HP and AB-8, and breakthrough volume was reached at 15 and 14 bed volumes of MA solution, respectively. The purity of the fraction by 40% ethanol elution on XAD-7HP reached 93.6%, from which cyanidin-3-glucoside and cyanidin-3-rutinoside were identified by HPLC-ESI-MS/MS. The method could be used to prepare high purity anthocyanins from mulberry fruits as well as other plants.

Comparative Assessment of Heavy Metals in Drinking Water Sources in Two Small-Scale Mining Communities in Northern Ghana.

The study assessed levels of heavy metals in drinking water sources in two small-scale mining communities (Nangodi and Tinga) in northern Ghana. Seventy-two (72) water samples were collected from boreholes, hand dug wells, dug-out, and a stream in the two mining communities. The levels of mercury (Hg), arsenic (As), lead (Pb), zinc (Zn), and cadmium (Cd) were determined using an atomic absorption spectrophotometer (AAS). Mean levels (mg/l) of heavy metals in water samples from Nangodi and Tinga communities were 0.038 and 0.064 (Hg), 0.031 and 0.002 (As), 0.250 and 0.031 (Pb), 0.034 and 0.002 (Zn), and 0.534 and 0.023 (Cd), respectively, for each community. Generally, levels of Hg, As, Pb, Zn, and Cd in water from Nangodi exceeded the World Health Organisation (WHO) stipulated limits of 0.010 for Hg, As, and Pb, 3.0 for Zn and 0.003 for Cd for drinking water, and levels of Hg, Pb, and Cd recorded in Tinga, exceeded the stipulated WHO limits. Ingestion of water, containing elevated levels of Hg, As, and Cd by residents in these mining communities may pose significant health risks. Continuous monitoring of the quality of drinking water sources in these two communities is recommended.

Integrated Assessment of Artisanal and Small-Scale Gold Mining in Ghana-Part 2: Natural Sciences Review.

This paper is one of three synthesis documents produced via an integrated assessment (IA) that aims to increase understanding of artisanal and small-scale gold mining (ASGM) in Ghana. Given the complexities surrounding ASGM, an integrated assessment (IA) framework was utilized to analyze socio-economic, health, and environmental data, and co-develop evidence-based responses with stakeholders. This paper focuses on the causes, status, trends, and consequences of ecological issues related to ASGM activity in Ghana. It reviews dozens of studies and thousands of samples to document evidence of heavy metals contamination in ecological media across Ghana. Soil and water mercury concentrations were generally lower than guideline values, but sediment mercury concentrations surpassed guideline values in 64% of samples. Arsenic, cadmium, and lead exceeded guideline values in 67%, 17%, and 24% of water samples, respectively. Other water quality parameters near ASGM sites show impairment, with some samples exceeding guidelines for acidity, turbidity, and nitrates. Additional ASGM-related stressors on environmental quality and ecosystem services include deforestation, land degradation, biodiversity loss, legacy contamination, and potential linkages to climate change. Though more research is needed to further elucidate the long-term impacts of ASGM on the environment, the plausible consequences of ecological damages should guide policies and actions to address the unique challenges posed by ASGM.

Toxicity assessment due to sub-chronic exposure to individual and mixtures of four toxic heavy metals.

Humans are exposed to a cocktail of heavy metal toxicants in the environment. Though heavy metals are deleterious, there is a paucity of information on toxicity of low dose mixtures. In this study, lead (Pb) (0.01mg/L), mercury (Hg) (0.001mg/L), cadmium (Cd) (0.005mg/L) and arsenic (As) (0.01mg/L) were administered individually and as mixtures to 10 groups of 40 three-week old mice (20 males and 20 females), for 120 days. The study established that low dose exposures induced toxicity to the brain, liver, and kidney of mice. Metal mixtures showed higher toxicities compared to individual metals, as exposure to low dose Pb+Hg+Cd reduced brain weight and induced structural lesions, such as neuronal degeneration in 30-days. Pb+Hg+Cd and Pb+Hg+As+Cd exposure induced hepatocellular injury to mice evidenced by decreased antioxidant activities with marginal increases in MDA. These were accentuated by increases in ALT, AST and ALP. Interactions in metal mixtures were basically synergistic in nature and exposure to Pb+Hg+As+Cd induced renal tubular necrosis in kidneys of mice. This study underlines the importance of elucidating the toxicity of low dose metal mixtures so as to protect public health.

Low concentration toxic metal mixture interactions: Effects on essential and non-essential metals in brain, liver, and kidneys of mice on sub-chronic exposure.

The deleterious effects of long term exposure to individual toxic metals in low doses are well documented. There is however, a paucity of information on interaction of low dose toxic metal mixtures with toxic and essential metals. This study reports on interactions between low dose mixtures of lead (Pb), mercury (Hg), arsenic (As) and cadmium (Cd) and toxic and essential metals. For 120d, six groups of forty mice each were exposed to metal mixtures, however, the control group was given distilled water. Exposure to Pb+Cd increased brain Pb by 479% in 30d, whiles Pb+Hg+As+Cd reduced liver Hg by 46.5%, but increased kidney As by 130% in 30d. Brain Cu, increased by 221% on Pb+Hg+As+Cd exposure, however, liver Ca reduced by 36.1% on Pb+Hg exposure in 60-d. Interactions within metal mixtures were largely synergistic. Principal component analysis (PCA) showed that low dose metal exposures influenced greatly levels of Hg (in brain and liver) and As (brain). The influence exerted on essential metals was highest in liver (PC1) followed by kidney (PC2) and brain (PC3). Exposure to low dose metal mixtures affected homeostasis of toxic and essential metals in tissues of mice.

Assessment of cancer and noncancer health risks from exposure to PAHs in street dust in the Tamale Metropolis, Ghana.

This study is part of a broader initiative to characterize, quantify and assess the human health risk associated with exposure to polycyclic aromatic hydrocarbons (PAHs) in street dust along the Trans-ECOWAS highway in West Africa. In the first part, PAHs were characterized and quantified in low- and high-traffic zones. In this study, cancer and noncancer human health risks from exposure to (PAHs) in street dust in the Tamale metropolis, Ghana were assessed in accordance with the USEPA risk assessment guidelines. The results of the study as obtained from inhalation of benzo [a] anthracene (BaA), benzo [a] pyrene (BaP), benzo [k] fluoranthene (BkF) and chrysene via central tendency exposure parameters (CTE) by trespassers (street hawkers including children and adults) in street dust within low traffic zones in the Tamale metropolis are 1.6E-02, 4.7E-02, 1.8E-03, and 1.6E-04 respectively. For reasonable maximum exposure parameters (RME), risk values of 1.2E-01, 3.5E-01, 1.3E-02 and 1.2E-03 respectively were obtained for benzo [a] anthracene, benzo [a] pyrene, benzo [k] fluoranthene and chrysene. Hazard index for acenaphthene, anthracene, fluoranthene, fluorine, naphthalene and pyrene in the CTE and RME scenarios were 2.2, 3.E-01, 2.6, 2.6, 100, 38 and 12, 1.7,15, 14, 550, 210 respectively. Generally, the cancer health risk associated with inhalation of benzo [a] anthracene, benzo [a] pyrene, benzo [k] fluoranthene and chrysene revealed that resident adults and children in the Tamale metropolis are at risk from exposure to these chemicals. The results of this preliminary assessment that quantified PAH related health risks along this part of the Trans-ECOWAS highway revealed that, there is the need for regulatory agencies to put in comprehensive measures to mitigate the risks posed to these categories of human receptors.

Water quality status of dugouts from five districts in Northern Ghana: implications for sustainable water resources management in a water stressed tropical savannah environment.

This study was primarily aimed at investigating the physicochemical and microbial quality of water in 14 such dugouts from five districts in the northern region of Ghana. Results obtained suggest that except for colour, turbidity, total iron and manganese, many physicochemical parameters were either within or close to the World Health Organisation's acceptable limits for drinking water. Generally, colour ranged from 5 to 750 Hz (mean 175 Hz), turbidity from 0.65 to 568 nephelometric turbidity units (NTU; mean 87.9 NTU), total iron from 0.07 to 7.85 mg/L (mean 1.0 mg/L) and manganese from 0.03 to 1.59 mg/L (mean 0.50 mg/L). Coliform counts in water from all the dugouts in both wet and dry seasons were, however, above the recommended limits for drinking water. Total and faecal coliforms ranged from 125 to 68,000 colony forming units (cfu)/100 mL (mean 10,623 cfu/100 mL) and <1 to 19,000 cfu/100 mL (mean 1,310 cfu /100 mL), respectively. The poor microbial quality, as indicated by the analytically significant presence of coliform bacteria in all samples of dugout water, strongly suggests susceptibility and exposure to waterborne diseases of, and consequent health implications on, the many people who continuously patronise these vital water resources throughout the year. In particular, more proactive sustainable water management options, such as introduction to communities of simple but cost-effective purification techniques for water drawn from dugouts for drinking purposes, education and information dissemination to the water users to ensure environmentally hygienic practices around dugouts, may be needed.