Short partial doffs of release/relock sockets may effectively stabilize limb fluid volume in prosthesis users with transtibial amputation.

BACKGROUND: A challenge often faced by people with lower extremity amputation is management of prosthetic socket fit due to changes in fluid volume within their residual limb. Prior research suggests that intermittently doffing the prosthetic socket may help stabilize daily residual limb fluid volume. METHODS: To assess the effects of partial doff duration on residual limb fluid volume retention, participants with transtibial amputation were tested by walking on a treadmill in a controlled, laboratory setting under three conditions. An automated system to release the locking pin and enlarge the socket was used to produce the partial doffing. Percent limb fluid volume changes after partial doffing for 4 min (Short Rest) and for 10 min (Long Rest) were compared with no partial doffing (No Release). Limb fluid volume was monitored using bioimpedance analysis. FINDINGS: Mean percent fluid volume changes in the posterior region were  -1.2% for No Release, 2.7% for Short Rest, and 1.0% for Long Rest. Short and Long Rests had larger increases than No Release (P = 0.005 and 0.03, respectively); Short and Long Rests were not statistically different (P = 0.10). Eight of the thirteen participants experienced a higher percent fluid volume gain for both release protocols while four experienced a higher percent fluid volume gain for only one release protocol. INTERPRETATION: A partial doff duration as short as 4 min may be an effective strategy to stabilize limb fluid volume in prosthesis users with transtibial amputation. Trials in at-home settings should be pursued.

Using magnetic panels to enlarge a transtibial prosthetic socket.

A novel method is described to connect a prosthetic liner to the panels of an adjustable socket to facilitate limb fluid volume stabilization in prosthesis users. Magnets are placed in the socket panels, and iron powder is embedded in the user's prosthetic liner. When the magnet is in close proximity to the liner, a firm connection is formed. The system's capability to execute panel pull on transtibial prosthesis users was tested. The backs of the panels were supported by a bracket mounted to the external surface of the socket that allowed the radial position of the panels to be adjusted. Bench testing demonstrated an optimized strength-to-weight ratio using 1.27-cm thick annular-shaped magnets supported by 0.32-cm thick backplates. Testing on four people with transtibial amputation showed that the maximum socket increase achieved using magnetic panel pull ranged from 5.3% to 13.8% of the initial (panels flush) socket volume. The results indicate that magnetic panel pull induces a meaningful increase in socket volume during sitting. The clinical relevance is a novel strategy that may help stabilize prosthesis users' limb fluid volume over the day.