Hexapod Hall scanner for high-resolution large area magnetic imaging.

We demonstrate a six-axis scanning imaging apparatus using piezo bending actuators with a large scan range. The six axes of motion of the bending actuators together with the coupling mechanism to the translation stage allow complete control of the sensor position and orientation over the scanning surface, which is ideal for the use of planar sensors such as Hall devices. In particular, the design allows for in situ correction of the probe tilt angle so that the sensor distance to sample surface can be minimized. We investigate the impact of this alignment on the quality of the measured data using an InSb Hall sensor and a magnetic sample. We also demonstrate a synchronous commutation setup that can greatly enhance the magnetic image by reducing the Hall signal offset.

Graphene gas sensing using a non-contact microwave method.

We report a non-contact CVD graphene gas sensing method that utilises a high Q microwave dielectric resonator perturbation technique. A graphene sample is coupled to the evanescent field of a dielectric resonator whereupon nitrogen dioxide (NO2), a p-doping gas, is detected by monitoring the change in the linewidth and frequency of the resonant mode. The resonant peak shape is dependent on the number of carriers in the graphene sheet. Therefore, the linewidth perturbation can be converted to a measurement of the graphene sheet resistance. To demonstrate the strength of this technique, sensor response curves for NO2 at different concentrations and temperatures are measured showing sub ppm sensitivity. This technique eliminates interactions between the trace gas and metal contacts that otherwise effect the sensor response of the graphene device.

A novel method for the injection and manipulation of magnetic charge states in nanostructures.

Realising the promise of next-generation magnetic nanotechnologies is contingent on the development of novel methods for controlling magnetic states at the nanoscale. There is currently demand for simple and flexible techniques to access exotic magnetisation states without convoluted fabrication and application processes. 360° domain walls (metastable twists in magnetisation separating two domains with parallel magnetisation) are one such state, which is currently of great interest in data storage and magnonics. Here, we demonstrate a straightforward and powerful process whereby a moving magnetic charge, provided experimentally by a magnetic force microscope tip, can write and manipulate magnetic charge states in ferromagnetic nanowires. The method is applicable to a wide range of nanowire architectures with considerable benefits over existing techniques. We confirm the method's efficacy via the injection and spatial manipulation of 360° domain walls in Py and Co nanowires. Experimental results are supported by micromagnetic simulations of the tip-nanowire interaction.

A Raman spectroscopic study of the carbon deposition mechanism on Ni/CGO electrodes during CO/CO2 electrolysis.

In situ and ex situ Raman analyses of porous Ni/CGO electrodes reveal differences in the amount, location and type of carbon formed during CO/CO2 electrolysis. The results demonstrate the limitations of optical in situ techniques applied to Solid Oxide Cells (SOCs) operated in electrolysis conditions. Increased carbon deposition close to the electrode-electrolyte interface is likely to be the result of high charge-transfer current in that area. The positive effect of a CGO interlayer on reducing carbon formation on the fuel electrode is demonstrated.

The non-random walk of chiral magnetic charge carriers in artificial spin ice.

The flow of magnetic charge carriers (dubbed magnetic monopoles) through frustrated spin ice lattices, governed simply by Coulombic forces, represents a new direction in electromagnetism. Artificial spin ice nanoarrays realise this effect at room temperature, where the magnetic charge is carried by domain walls. Control of domain wall path is one important element of utilizing this new medium. By imaging the transit of domain walls across different connected 2D honeycomb structures we contribute an important aspect which will enable that control to be realized. Although apparently equivalent paths are presented to a domain wall as it approaches a Y-shaped vertex from a bar parallel to the field, we observe a stark non-random path distribution, which we attribute to the chirality of the magnetic charges. These observations are supported by detailed statistical modelling and micromagnetic simulations. The identification of chiral control to magnetic charge path selectivity invites analogy with spintronics.

Designing a miniaturised heated stage for in situ optical measurements of solid oxide fuel cell electrode surfaces, and probing the oxidation of solid oxide fuel cell anodes using in situ Raman spectroscopy.

A novel miniaturised heated stage for in operando optical measurements on solid oxide fuel cell electrode surfaces is described. The design combines the advantages of previously reported designs, namely, (i) fully controllable dual atmosphere operation enabling fuel cell pellets to be tested in operando with either electrode in any atmosphere being the focus of study, and (ii) combined electrochemical measurements with optical spectroscopy measurements with the potential for highly detailed study of electrochemical processes; with the following advances, (iii) integrated fitting for mounting on a mapping stage enabling 2-D spatial characterisation of the surface, (iv) a compact profile that is externally cooled, enabling operation on an existing microscope without the need for specialized lenses, (v) the ability to cool very rapidly, from 600 °C to 300 °C in less than 5 min without damaging the experimental apparatus, and (vi) the ability to accommodate a range of pellet sizes and thicknesses.

A calorimetric method to detect a weak or distributed latent heat contribution at first order magnetic transitions.

Microcalorimetry has proven to be a versatile tool to investigate first order magnetic phase transitions as it can be used in different experimental modes to separate the latent heat from heat capacity. However, the methodology fails if the latent heat contribution is below instrumental resolution of 10 nJ. If the nucleation size of the new phase is much less than 100 µm, the typical size of the fragment measured, the latent heat could appear to be too distributed in temperature or magnetic field to be detected. Here, we show that for certain classes of magnetic transition, our microcalorimetry technique can be extended to enable an estimate of the latent heat to be obtained from a combination of heat capacity and magnetic measurements. This technique is best suited for material systems with weakly first order phase transitions, or highly distributed due to inhomogeneity.

Emerging chirality in artificial spin ice.

Artificial spin ice, made up of planar nanostructured arrays of simple ferromagnetic bars, is a playground for rich physics associated with the spin alignment of the bars and spin texture associated with the magnetic frustration at the bar vertices. The phase diagram is exotic, showing magnetic monopole-like defects and liquid and solid phases of spins arranged in loop states with predicted chiral order. We show that magnetotransport measurements in connected honeycomb structures yield the onset of an anomalous Hall signal at 50 kelvin. The temperature scale can be attributed to the long-range dipolar ice phase. The topological Hall signal arises because chiral loops form at the sample edges, indicating a generic route to exotic states via nanoarray edge structure.

Sub-100-nm negative bend resistance ballistic sensors for high spatial resolution magnetic field detection.

We report the magnetic field detection properties of ballistic sensors utilizing the negative bend resistance of InSb∕In(1-x)Al(x)Sb quantum well cross junctions as a function of temperature and geometric size. We demonstrate that the maximum responsivity to magnetic field and its linearity increase as the critical device dimension is reduced. This observation deviates from the predictions of the classical billiard ball model unless significant diffuse boundary scattering is included. The smallest device studied has an active sensor area of 35×35 nm(2), with a maximum responsivity of 20 kΩ∕T, and a noise-equivalent field of 0.87µT∕Hz at 100 K.

Experimental determination of the Rashba coefficient in InSb/InAlSb quantum wells at zero magnetic field and elevated temperatures.

We report the optical measurement of the spin dynamics at elevated temperatures and in zero magnetic field for two types of degenerately doped n-InSb quantum wells (QWs), one asymmetric (sample A) and one symmetric (sample B) with regards to the electrostatic potential across the QW. Making use of three directly determined experimental parameters: the spin lifetime, τ(s), the sheet carrier concentration, n, and the electron mobility, µ, we directly extract the zero-field spin splitting. For the asymmetric sample where the Rashba interaction is the dominant source of spin splitting, we deduce a room temperature Rashba parameter of α = 0.09 ± 0.1 eV Å which is in good agreement with calculations and we estimate the Rashba coefficient α(0) (a figure of merit for the ease with which electron spins can be modulated via an electric field). We review the merits/limitations of this approach and the implications of our findings for spintronic devices.

Room temperature ballistic transport in InSb quantum well nanodevices.

We report the room temperature observation of significant ballistic electron transport in shallow etched four-terminal mesoscopic devices fabricated on an InSb/AlInSb quantum well (QW) heterostructure with a crucial partitioned growth-buffer scheme. Ballistic electron transport is evidenced by a negative bend resistance signature which is quite clearly observed at 295 K and at current densities in excess of 10(6) A/cm(2). This demonstrates unequivocally that by using effective growth and processing strategies, room temperature ballistic effects can be exploited in InSb/AlInSb QWs at practical device dimensions.

A nanoscale Ti∕GaAs metal-semiconductor hybrid sensor for room temperature light detection.

We report an individually addressable Ti∕GaAs metal-semiconductor hybrid optical nanosensor with positive photoresistance and a sensitivity that increases as the device dimensions shrink. The underlying physics relates to the crossover from ballistic to diffusive transport of the photoinduced carriers and the geometric enhancement of the effect associated with a Schottky-barrier-coupled parallel metal shunt layer. For a 250 nm device under 633 nm illumination we observe a specific detectivity of D(*)=5.06×10(11) cm √Hz∕W with a dynamic response of 40 dB.

A scanning Hall probe imaging study of the field induced martensite-austenite phase transition in Ni50Mn34In16 alloy.

The martensite to austenite phase transition in the off-stoichiometric Heusler alloy Ni(50)Mn(34)In(16) can be induced both by temperature change and by application of a magnetic field. We have used scanning Hall probe imaging to study the magnetic field induced martensite-austenite phase transition. The study provides clear visual evidence of the coexistence of the martensite and austenite phases across this field induced transition in both increasing and decreasing magnetic fields. Clear evidence of thermomagnetic history effects associated with the martensite-austenite phase transition is also obtained. Quantitative analysis of the magnetic field dependence of the volume fraction of the austenite phase in Ni(50)Mn(34)In(16) shows evidence of a nucleation and growth mechanism across the field induced martensite-austenite phase transition. The local M-H loops constructed from the Hall images indicate the presence of a landscape of the critical magnetic field (for the field induced transition) distributed over the sample volume and thus confirm the disorder influenced nature of this first-order magnetic phase transition.

Dimensional crossover and weak localization in a 90 nm n-GaAs thin film.

We report on the magnetotransport in a 90 nm thick n-type GaAs epitaxial thin film in the weak localization (WL) regime. Low temperature (T

Towards a metrological determination of the performance of SERS media.

Enhancement factors under SERS conditions are characterised for two SERS active substrates with different geometries using a combination of optical pumping and photobleaching. A rigorous mathematical method of the photobleaching dynamics under SERS conditions is developed to allow the average enhancement factor to be investigated whilst maximal enhancement factors are studied using optical pumping. We show that both average and maximal enhancements are correlated for the surfaces with average enhancements of approximately 10(8).

Coexistence of universal and topological anomalous hall effects in metal CrO2 thin films in the dirty limit.

The scaling exponent of 1.6 between anomalous Hall and longitudinal conductivity, characteristic of the universal Hall mechanism in dirty-metal ferromagnets, emerges from a series of CrO2 films as we systematically increase structural disorder. Magnetic disorder in CrO2 increases with temperature and this drives a separate topological Hall mechanism. We find that these terms are controlled discretely by structural and magnetic defect populations, and their coexistence leads to apparent divergence from exponent 1.6, suggesting that the universal term is more prevalent than previously realized.

Heat capacity and latent heat measurements of CoMnSi using a microcalorimeter.

A new method of utilizing a commercial silicon nitride membrane calorimeter to measure the latent heat at a first order phase transition is presented. The method is a direct measurement of the thermoelectric voltage jump induced by the latent heat, in a thermally isolated system ideally suited for single crystal and small microgram samples. We show that when combined with the ac calorimetry technique previously developed, the resultant thermal measurement capabilities are extremely powerful. We demonstrate the applicability of the combined method with measurements on a 100 microm size fragment of CoMnSi exhibiting a sizable magnetocaloric effect near room temperature, and obtain good agreement with previously reported values on bulk samples.

Vibrational pumping in surface enhanced Raman scattering (SERS).

In this tutorial review, the underlying principles of vibrational pumping in surface enhanced Raman scattering (SERS) are summarized and explained within the framework of their historical development. Some state-of-the-art results in the field are also presented, with the aim of giving an overview on what has been established at this stage, as well as hinting at areas where future developments might take place.

A d.c. magnetic metamaterial.

Electromagnetic metamaterials are a class of materials that have been artificially structured on a subwavelength scale. They are currently the focus of a great deal of interest because they allow access to previously unrealizable properties such as a negative refractive index. Most metamaterial designs have so far been based on resonant elements, such as split rings, and research has concentrated on microwave frequencies and above. Here, we present the first experimental realization of a non-resonant metamaterial designed to operate at zero frequency. Our samples are based on a recently proposed template for an anisotropic magnetic metamaterial consisting of an array of superconducting plates. Magnetometry experiments show a strong, adjustable diamagnetic response when a field is applied perpendicular to the plates. We have calculated the corresponding effective permeability, which agrees well with theoretical predictions. Applications for this metamaterial may include non-intrusive screening of weak d.c. magnetic fields.

Raman spectroscopy as a probe of temperature and oxidation state for gadolinium-doped ceria used in solid oxide fuel cells.

Raman spectroscopy is a noninvasive and highly sensitive analytical technique capable of identifying chemical compounds in environments that can mimic SOFC operating conditions. Here we demonstrate the use of Raman spectroscopy to perform local thermal and temporal measurements, both of which are essential if phase formation diagrams are to be mapped out and compared to thermodynamic phase stability predictions. We find that the time resolution of the Raman technique is more than sufficient to capture essential dynamic effects associated with a change of chemical composition.