Thermally Resistant, Self-Extinguishing Thermoplastic Composites Enabled by Tannin-Based Carbonaceous Particulate.

Flame-resistant materials are key components in buildings and several other engineering applications. In this study, flame retardancy and thermal stability were conferred to a highly flammable technical thermoplastic-polypropylene (PP)-upon compositing with a carbonaceous tannin-based particulate (CTP). Herein, we report on a straightforward, facile, and green approach to prepare self-extinguishing thermoplastic composites by thermoblending highly recalcitrant particulate. The thermal stability and mechanical properties of the composites are tethered to the CTP content. We demonstrate that the addition of up to 65 wt% of CTP improved the viscoelastic properties and hydrophobicity of the PP, whereas having marginal effects on bulk water interactions. Most importantly, compositing with CTP remarkably improved the thermal stability of the composites, especially over 300 °C, which is an important threshold associated with the combustion of volatiles. PP-CTP composites demonstrated great capacity to limit and stop fire propagation. Therefore, we offer an innovative route towards thermally resistant and self-extinguishing PP composites, which is enabled by sustainable tannin-based flame retardants capable of further broadening the technical range of commodity polyolefins to high temperature scenarios.

Nanofibrillated Cellulose-Based Aerogels Functionalized with Tajuva (Maclura tinctoria) Heartwood Extract.

Aerogels are 3-D nanostructures of non-fluid colloidal interconnected porous networks consisting of loosely packed bonded particles that are expanded throughout their volume by gas and exhibit ultra-low density and high specific surface area. Cellulose-based aerogels can be obtained from hydrogels through a drying process, replacing the solvent (water) with air and keeping the pristine three-dimensional arrangement. In this work, hybrid cellulose-based aerogels were produced and their potential for use as dressings was assessed. Nanofibrilated cellulose (NFC) hydrogels were produced by a co-grinding process in a stone micronizer using a kraft cellulosic pulp and a phenolic extract from Maclura tinctoria (Tajuva) heartwood. NFC-based aerogels were produced by freeze followed by lyophilization, in a way that the Tajuva extract acted as a functionalizing agent. The obtained aerogels showed high porosity (ranging from 97% to 99%) and low density (ranging from 0.025 to 0.040 g·cm-3), as well a typical network and sheet-like structure with 100 to 300 µm pores, which yielded compressive strengths ranging from 60 to 340 kPa. The reached antibacterial and antioxidant activities, percentage of inhibitions and water uptakes suggest that the aerogels can be used as fluid absorbers. Additionally, the immobilization of the Tajuva extract indicates the potential for dentistry applications.

Cogrinding Wood Fibers and Tannins: Surfactant Effects on the Interactions and Properties of Functional Films for Sustainable Packaging Materials.

We report on the combination of cellulose nanofibrils (CNFs) and condensed tannins from Acacia mearnsii for the development of hybrid, functional films. The tannins are fractionated and concentrated in polyphenolics that are used for functional components in the hybrid materials. Cogrinding of wood fibers with the tannins in aqueous media allows simultaneous fiber deconstruction and in situ binding of tannins on the freshly exposed cellulosic surfaces. Hence, a tightly bound bicomponent system is produced, which is otherwise not possible if typical adsorption protocols are followed, mainly due to the extensive hydration typical of CNFs. A nonionic surfactant is used to tailor the cellulose-tannin interactions. The proposed strategy not only enables the incorporation of tannins with CNFs but also endows a high and prolonged antioxidant effect of films formed by filtration. Compared to tannin-free films, those carrying tannins are considerably more hydrophobic. In addition, they show selective absorption of ultraviolet light while maintaining optical transparency in the visible range. The proposed simple protocol for incorporating tannins and surfactants with CNFs is suitable to produce functional materials. This is possible by understanding associated interfacial phenomena in the context of sustainable materials within the concept of the circular bioeconomy.

Cellulose pulp produced from bulrush fiber / Produção de polpa celulósica a partir das fibras de junco

ABSTRACT: Brazil continues to use wood as the principal raw material source for the pulp industry; although, non-wood fibers have been revealed to be a competent substitute to produce paper with different and exceptional properties. Keeping this in focus, this study aimed to assess potential of Schoenoplectus californicus fibers (C. A. Mey.) Soják, commonly identified as bulrush or reed, in cellulosic pulp generation, as an alternative fiber source for the pulp and paper industry. On analyzing the chemical composition of reed fibers, extractives of lignin, carbohydrates, uronic acids and minerals were reported. Physico-chemical characteristics of reed-based cellulosic pulp were estimated including viscosity, hexenuronic acids, etc., as well as anatomical features of length, width, etc. From the chemical analyses of the reed the presence of high concentrations of extractives and silica was clear, making them unfit as raw material for cellulosic pulp production. Pulp kraft pulping process produced brown pulps low in viscosity (34.5m Pa.s) and hexenuronic acid content. Reed is thus classifiable as short-fiber source for pulp and paper industries.

RESUMO: A madeira é a principal fonte de matéria prima utilizada nas indústrias de celulose no Brasil, porém o emprego de fibras não madeireiras pode ser uma alternativa satisfatória para a fabricação de papéis com propriedades diferenciadas e especiais. Nesse sentido, o objetivo desse trabalho foi avaliar o potencial das fibras de Schoenoplectus californicus (C.A. Mey.) Soják, popularmente conhecido como junco, na produção de polpa celulósica, como fonte alternativa de fibras para as indústrias do setor de celulose e papel. Nas fibras do junco foram realizadas análises de composição química, entre elas: teores de extrativos, lignina, carboidratos, ácidos urônicos e minerais. As polpas celulósicas produzidas a partir do junco foram avaliadas no que diz respeito às características físico-químicas (viscosidade, ácidos hexenurônicos, etc.) e anatômicas (comprimento, largura, etc.). As análises químicas demonstraram que as fibras do junco apresentam altos teores de extrativos e sílica, o que as tornam uma matéria prima desfavorável para a produção de polpa celulósica. O processo de polpação kraft do junco resultou em polpas marrons de baixa viscosidade (34,5m Pa.s) e com baixos teores de ácidos hexenurônicos. O junco pode ser classificado como fonte de fibras curtas para as indústrias de celulose e papel.

As xilanas nas propriedades de polpas marrons de eucalipto / Xylans on eucalyptus brown pulp propertie

O objetivo deste estudo foi avaliar as propriedades de polpas kraft marrons de madeiras de Eucalyptus grandise Eucalyptus urograndisde composição química distinta, principalmente em relação aos seus conteúdos de xilanas, para fabricação de papéis. As polpas marrons de número kappa 17-18 e conteúdos de xilanas variando de 6 a 21% foram produzidas sob diferentes protocolos de cozimento: 1) kraft convencional; 2) pré-hidrólise kraft; 3) kraft de alta alcalinidade; e 4) kraft de alto rendimento. As polpas marrons foram refinadas em moinho PFI e seus respectivos papéis produzidos foram avaliados quanto às suas propriedades físico-mecânicas e ópticas. De modo geral, as propriedades de resistência dos papéis foram beneficiadas pelo conteúdo de xilanas. Para níveis muito altos de refino, ocorreram quedas bruscas de resistência ao rasgo para os papéis e o consumo de energia de refino foi influenciado pelo conteúdo de xilanas nas polpas marrons. Os mais altos valores de volume específico aparente foram obtidos para os papéis com baixo conteúdo de xilanas, o que os torna interessantes, se branqueados, no segmento de papéis tissue. Os papéis com elevado conteúdo de xilanas apresentaram-se economicamente atrativos e com características de resistências adequadas para o segmento de papéis de imprimir e escrever.

The objective of this study was to evaluate properties of brown pulp from Eucalyptus grandisand Eucalyptus urograndisof distinct chemical composition, mainly in refers to its xylans content, for the manufacture of tissue and printing and writing (P&W) paper grades. Brow pulps of kappa number 17-18 and xylans contents varying 6-21% had been produced under different cooking protocols: 1) conventional kraft; 2) pre-hydrolysis kraft; 3) high alkalinity kraft; and 4) kraft of high yield. The brown pulps had been beated in PFI mill and its respective produced papers had been evaluated as regards physical-mechanical and optic properties. The highest bulk values had been gotten for papers with low xylans contents, what had revealed interesting, if bleached, in the manufacture of tissue papers. The papers with high xylans contents, had been presented technically viable and with resistance characteristics adjusted for the manufacture of P&W papers.