Functional resilience of C57BL/6J mouse heart to dietary fat overload.

Molecular mechanisms underlying cardiac dysfunction and subsequent heart failure in diabetic cardiomyopathy are incompletely understood. Initially we intended to test the role of G protein-coupled receptor kinase 2 (GRK2), a potential mediator of cardiac dysfunction in diabetic cardiomyopathy, but found that control animals on HFD did not develop cardiomyopathy. Cardiac function was preserved in both wild-type and GRK2 knockout animals fed high-fat diet as indicated by preserved left ventricular ejection fraction (LVEF) although heart mass was increased. The absence of cardiac dysfunction led us to rigorously evaluate the utility of diet-induced obesity to model diabetic cardiomyopathy in mice. Using pure C57BL/6J animals and various diets formulated with different sources of fat-lard (32% saturated fat, 68% unsaturated fat) or hydrogenated coconut oil (95% saturated fat), we consistently observed left ventricular hypertrophy, preserved LVEF, and preserved contractility measured by invasive hemodynamics in animals fed high-fat diet. Gene expression patterns that characterize pathological hypertrophy were not induced, but a modest induction of various collagen isoforms and matrix metalloproteinases was observed in heart with high-fat diet feeding. PPARα-target genes that enhance lipid utilization such as Pdk4, CD36, AcadL, and Cpt1b were induced, but mitochondrial energetics was not impaired. These results suggest that although long-term fat feeding in mice induces cardiac hypertrophy and increases cardiac fatty acid metabolism, it may not be sufficient to activate pathological hypertrophic mechanisms that impair cardiac function or induce cardiac fibrosis. Thus, additional factors that are currently not understood may contribute to the cardiac abnormalities previously reported by many groups.NEW & NOTEWORTHY Dietary fat overload (DFO) is widely used to model diabetic cardiomyopathy but the utility of this model is controversial. We comprehensively characterized cardiac contractile and mitochondrial function in C57BL6/J mice fed with lard-based or saturated fat-enriched diets initiated at two ages. Despite cardiac hypertrophy, contractile and mitochondrial function is preserved, and molecular adaptations likely limit lipotoxicity. The resilience of these hearts to DFO underscores the need to develop robust alternative models of diabetic cardiomyopathy.

TMEM135 is a Novel Regulator of Mitochondrial Dynamics and Physiology with Implications for Human Health Conditions.

Transmembrane proteins (TMEMs) are integral proteins that span biological membranes. TMEMs function as cellular membrane gates by modifying their conformation to control the influx and efflux of signals and molecules. TMEMs also reside in and interact with the membranes of various intracellular organelles. Despite much knowledge about the biological importance of TMEMs, their role in metabolic regulation is poorly understood. This review highlights the role of a single TMEM, transmembrane protein 135 (TMEM135). TMEM135 is thought to regulate the balance between mitochondrial fusion and fission and plays a role in regulating lipid droplet formation/tethering, fatty acid metabolism, and peroxisomal function. This review highlights our current understanding of the various roles of TMEM135 in cellular processes, organelle function, calcium dynamics, and metabolism.

Empirical determination of explosive vapor transport efficiencies.

The transport efficiency of 2,4-dinitrotoluene (2,4-DNT), 2,4,6-trinitrotoluene (TNT) and 1,3,5-trinitro-1,3,5-triazinane (RDX) trace vapors through tubing materials that commonly constitute vapor handling infrastructures have been determined for a variety of tubing dimensions and sampling conditions. Using a programmable temperature vaporization inlet coupled with a gas chromatography mass spectrometer (PTV-GC-MS), the explosive vapors were quantified both with and without a length of tubing of a specific material in the sampling flow path. At vapor temperatures of 30 °C and 66 °C, minimal attenuations were observed for 2,4-DNT and TNT vapor concentrations when the tubing material was in-line with the sampling flow path, indicating that the transport is largely unaffected by interactions with the surface of the tubing materials. In contrast, RDX vapors showed large attenuations as a function of both sampling conditions and tubing materials/dimensions. For those experiments where attenuated RDX vapor transport was observed, the mass sequestered by interactions between the flowing vapor and the internal tubing surface was determined to be in the range of tens to hundreds of picograms. Of all the materials examined for RDX transport, fluorinated ethylene propylene (FEP) tubing resulted in the least amount of mass loss to surface interactions, with vapor transport efficiencies (VTEs) between 95-100%. However, for some materials, the combination of tubing dimensions and sampling conditions resulted in no RDX transport, even after sampling more than 250.0 L of vapor through the tubing.

Trace vapor generator for Explosives and Narcotics (TV-Gen).

The Trace Vapor Generator for Explosives and Narcotics (TV-Gen) is a portable and compact instrument designed to deliver a continuous source of trace-level vapors and vapor mixtures. It provides a tool to assist in the independent validation and verification of new materials and sensors under development for the vapor detection of explosives and narcotics. The design was conceived for use with a broad range of analytes, detection systems, materials, and sensors and to switch easily between the clean and analyte vapor streams. The TV-Gen system utilizes nebulization of aqueous analyte solutions, an oven to promote efficient transport, and a control box that provides dedicated computer control with logging capabilities. Resultant vapor streams are stable over several hours, with the vapor concentration controlled by a combination of aqueous analyte solution concentration, liquid flow rate through the nebulizer, and volume flow rate of air through the TV-Gen manifold.

Reducing drought emergencies in the Horn of Africa.

Drought-driven humanitarian emergencies are becoming more frequent in the Horn of Africa where millions of people in this arid region face chronic water and food insecurity. Evidence from the region shows increasing reliance on groundwater supplies, infrastructure and institutional systems in response to decreasing rainfall. Drought emergencies can be mitigated by investing in resilience efforts that make safe water reliably available at strategic groundwater abstraction locations during cycles of water stress. A combination of early warning data, policy reform, asset management and improved rural water supplies and maintenance may enable rapid, responsive, and accountable water governance that is more cost effective than emergency relief and better positioned to absorb and adapt to shocks.

Flow-Through Optical Chromatography in Combination with Confocal Raman Microspectroscopy: A Novel Label-Free Approach To Detect Responses of Live Macrophages to Environmental Stimuli.

Flow-through optical chromatography (FT-OC), an advanced mode of optical chromatography, achieved baseline separation of a mixture of silica microparticles (SiO2, 1.00 and 2.50 µm) and a mixture of polystyrene microparticles (PS, 1.00, 2.00, and 3.00 µm) based on particle size. Comparisons made between experimentally determined velocities for the microparticles and theoretically derived velocities from Mie theory and Stokes' law validated the data collection setup and the data analysis for FT-OC. A population shift in live macrophages (cell line IC-21, ATCC TIB-186) responding to environmental stimuli was sensitively detected by FT-OC. The average velocity of macrophages stressed by nutritional deprivation was decreased considerably together with a small but statistically significant increase in cell size. Mie scattering calculations demonstrated that the small increase in cell size of macrophages stressed by nutritional deprivation was not entirely responsible for this decrease. Confocal fluorescence microscopy and atomic force microscopy (AFM) studies revealed morphological changes of macrophages induced by nutritional deprivation, and these changes were more likely responsible for the decrease in average velocity detected by FT-OC. Confocal Raman microspectroscopy was used to shed light upon biochemical transformations of macrophages suffering from nutritional deprivation.

Micellar Electrokinetic Chromatography.

Micellar electrokinetic chromatography (MEKC) is a mode of capillary electrophoresis that allows for the separation of neutral molecules in an electric field. Typically, neutral molecules move with electroosmotic flow (EOF) or bulk flow during electrophoretic separations resulting in no temporal resolution between mixtures of neutral analytes. Inclusion of surfactant micelles in the separation buffer allows for the separation of neutral analytes from one another through association with the micelle. Here we outline the implementation of MEKC for the separation of neutral molecules using a mixture of nitroaromatic explosives and their degradation products serving as a test analyte mixture.

Trace explosives sensor testbed (TESTbed).

A novel vapor delivery testbed, referred to as the Trace Explosives Sensor Testbed, or TESTbed, is demonstrated that is amenable to both high- and low-volatility explosives vapors including nitromethane, nitroglycerine, ethylene glycol dinitrate, triacetone triperoxide, 2,4,6-trinitrotoluene, pentaerythritol tetranitrate, and hexahydro-1,3,5-trinitro-1,3,5-triazine. The TESTbed incorporates a six-port dual-line manifold system allowing for rapid actuation between a dedicated clean air source and a trace explosives vapor source. Explosives and explosives-related vapors can be sourced through a number of means including gas cylinders, permeation tube ovens, dynamic headspace chambers, and a Pneumatically Modulated Liquid Delivery System coupled to a perfluoroalkoxy total-consumption microflow nebulizer. Key features of the TESTbed include continuous and pulseless control of trace vapor concentrations with wide dynamic range of concentration generation, six sampling ports with reproducible vapor profile outputs, limited low-volatility explosives adsorption to the manifold surface, temperature and humidity control of the vapor stream, and a graphical user interface for system operation and testing protocol implementation.

Reducing barriers to mental health care for student-athletes: An integrated care model.

Research suggests that National Collegiate Athletic Association (NCAA) Division I student-athletes have higher levels of stress and other behavioral health issues, including substance use, than nonathletes. For several reasons, student-athletes may be less likely to admit to behavioral health issues and seek mental health care. Integrated care is a model of care that integrates behavioral health into a medical practice. This article explores the newly released NCAA Best Mental Health Practice guidelines and the application of integrated care to a Division I athletic training room setting using the three-worldview framework for successful integration, incorporating clinical outcomes, operational reliability, and financial stability. (PsycINFO Database Record

Factors affecting the intramolecular decomposition of hexamethylene triperoxide diamine and implications for detection.

Hexamethylene triperoxide diamine (HMTD) is an easily synthesized and highly sensitive organic peroxide frequently used as a primary explosive. The vapor pressure of HMTD is very low, impeding vapor detection, especially when compared to other peroxide explosives, such as triacetone triperoxide (TATP) or diacetone diperoxide (DADP). Despite this fact, HMTD has a perceptible odor that could be utilized in the indirect detection of HMTD vapor. Headspace measurements above solid HMTD samples confirm that HMTD readily decomposes under ambient conditions to form highly volatile products that include formic acid, ammonia, trimethylamine and formamides. The presence and quantity of these compounds are affected by storage condition, time, and synthetic method, with synthetic method having the most significant effect on the content of the headspace. A kinetic study of HMTD decomposition in solution indicated a correlation between degradation rate and the presence of decomposition species identified in the headspace, and provided further insight into the mechanism of decomposition. The study provided evidence for a proton assisted decomposition reaction with water, as well as an intramolecular decomposition process facilitated by the presence of water.

Catalytic activity and thermal stability of horseradish peroxidase encapsulated in self-assembled organic nanotubes.

Horseradish peroxidase (HRP) was encapsulated in self-assembled lithocholic acid (LCA) based organic nanotubes and its catalytic activity before and after thermal treatment was measured for comparison with free HRP. The apparent kcat (kcat/Km) for nanotube encapsulated HRP remained almost the same before and after thermal treatment, reporting an average value of 3.7 ± 0.4 µM(-1) s(-1). The apparent kcat value for free HRP decreased from 14.8 ± 1.3 µM(-1) s(-1) for samples stored at 4 °C to 2.4 ± 0.1 µM(-1) s(-1) after thermal treatment for 8 h at 55 °C. The Michaelis-Menten constants, Km, determined for encapsulated HRP and free HRP were relatively unperturbed by storage conditions at 4 °C or thermally treated at 55 °C for varying time periods from 2-8 h, with encapsulated HRP having a slightly higher Km than free HRP (13.4 ± 0.9 µM versus 11.7 ± 0.4 µM). The amount of HRP encapsulated in LCA nanotubes increased dramatically when the mixture of HRP and LCA nanotubes was brought to an elevated temperature. Within 4 h of thermal treatment at 55 °C, the amount of HRP encapsulated by the LCA nanotubes was more than 4 times the amount of HRP encapsulated when equilibrated at 4 °C for 7 days. Molecular dynamics (MD) simulations show that the higher degree of exposure of hydrophobic residues in HRP at elevated temperatures enhances the hydrophobic interaction between HRP and the nanotube wall, resulting in the increased amount of HRP surface adsorption and, hence, the overall amount of encapsulation inside the nanotubes.

Trace Explosives Vapor Generation and Quantitation at Parts per Quadrillion Concentrations.

The generation of trace 2,4,6-trinitrotoluene (TNT), cyclotrimethylenetrinitramine (RDX), and pentaerythritol tetranitrate (PETN) vapors using a pneumatically modulated liquid delivery system (PMLDS) coupled to a polytetrafluoroethylene (PTFE) total-consumption micronebulizer is presented. The vapor generator operates in a continuous manner with final vapor concentrations proportional to the explosive concentration in aqueous solution delivered through the nebulizer and the diluent air flow rate. For quantitation of concentrations in the parts per billionvolume (ppbv) to parts per trillionvolume (pptrv) range, Tenax-TA thermal desorption tubes were used for vapor collection with subsequent analysis on a thermal-desorption system programmable-temperature vaporization gas chromatograph (TDS-PTV-GC) with a µ-ECD detector. With 30 min sample times and an average sampling rate of 100 mL min(-1), vapor concentrations of 38 pptrv for TNT, 25 pptrv for RDX, and 26 pptrv for PETN were determined. For parts per quadrillionvolume (ppqv) vapor quantitation of TNT and RDX, an online PTV-GC system with a negative-ion chemical ionization mass spectrometer (methane reagent gas) was used for direct sampling and capture of the vapor on the PTV inlet. Vapor concentrations as low as 160 ppqv and 710 ppqv for TNT and RDX were quantified, respectively, with an instrument duty cycle as low as 4 min.

Analysis of ammonium nitrate headspace by on-fiber solid phase microextraction derivatization with gas chromatography mass spectrometry.

A novel analytical method has been developed for the quantitation of trace levels of ammonia in the headspace of ammonium nitrate (AN) using derivatized solid phase microextraction (SPME) fibers with gas chromatography mass spectrometry (GC-MS). Ammonia is difficult to detect via direct injection into a GC-MS because of its low molecular weight and extreme polarity. To circumvent this issue, ammonia was derivatized directly onto a SPME fiber by the reaction of butyl chloroformate coated fibers with the ammonia to form butyl carbamate. A derivatized externally sampled internal standard (dESIS) method based upon the reactivity of diethylamine with unreacted butyl chloroformate on the SPME fiber to form butyl diethylcarbamate was established for the reproducible quantification of ammonia concentration. Both of these compounds are easily detectable and separable via GC-MS. The optimized method was then used to quantitate the vapor concentration of ammonia in the headspace of two commonly used improvised explosive device (IED) materials, ammonium nitrate fuel oil (ANFO) and ammonium nitrate aluminum powder (Ammonal), as well as identify the presence of additional fuel components within the headspace.

Impact of confinement on proteins concentrated in lithocholic acid based organic nanotubes.

Organic nanotubes form in aqueous solution near physiological pH by self-assembly of lithocholic acid (LCA) with inner diameters of 20-40nm. The encapsulation of enhanced green fluorescent protein (eGFP) and resultant confinement effect for eGFP within these nanotubes is studied via confocal microscopy. Timed release rate studies of eGFP encapsulated in LCA nanotubes and fluorescence recovery after photobleaching (FRAP) indicate that the diffusive transport of eGFP out of and/or within the nanotubes is very slow, in contrast to the rapid introduction of eGFP into the nanotubes. By encapsulating two fluorescent proteins in LCA nanotubes, eGFP and mCherry, as a fluorescence resonance energy transfer (FRET) pair, the FRET efficiencies are determined using FRET imaging microscopy at three different protein concentrations with a fixed donor-to-acceptor ratio of 1:1. Förster theory reveals that the proteins are spatially separated by 4.8-7.2nm in distance inside these nanotubes. The biomimetic nanochannels of LCA nanotubes not only afford a confining effect on eGFP that results in enhanced chemical and thermal stability under conditions of high denaturant concentration and temperature, but also function as protein concentrators for enriching protein in the nanochannels from a diluted protein solution by up to two orders of magnitude.

Mobile Versus Fixed Deployment of Automated External Defibrillators in Rural EMS.

INTRODUCTION: There is no consensus on where automated external defibrillators (AEDs) should be placed in rural communities to maximize impact on survival from cardiac arrest. In the community of Stokes County, North Carolina (USA) the Emergency Medical Services (EMS) system promotes cardiopulmonary resuscitation (CPR) public education and AED use with public access defibrillators (PADs) placed mainly in public schools, churches, and government buildings. HYPOTHESIS/PROBLEM: This study tested the utilization of AEDs assigned to first responders (FRs) in their private-owned-vehicle (POV) compared to AEDs in fixed locations. METHODS: The authors performed a prospective, observational study measuring utilization of AEDs carried by FRs in their POV compared to utilization of AEDs in fixed locations. Automated external defibrillator utilization is activation with pads placed on the patient and analysis of heart rhythm to determine if shock/no-shock is indicated. The Institutional Review Board of Wake Forest University Baptist Health System approved the study and written informed consent was waived. The study began on December 01, 2012 at midnight and ended on December 01, 2013 at midnight. RESULTS: During the 12-month study period, 81 community AEDs were in place, 66 in fixed locations and 15 assigned to FRs in their POVs. No utilizations of the 66 fixed location AEDs were reported (0.0 utilizations/AED/year) while 19 utilizations occurred in the FR POV AED study group (1.27 utilizations/AED/year; P<.0001). Odds ratio of using a FR POV located AED was 172 times more likely than using a community fixed-location AED in this rural community. Discussion Placing AEDs in a rural community poses many challenges for optimal utilization in terms of cardiac arrest occurrences. Few studies exist to direct rural community efforts in placing AEDs where they can be most effective, and it has been postulated that placing them directly with FRs may be advantageous. CONCLUSIONS: In this rural community, the authors found that placing AED devices with FRs in their POVs resulted in a statistically significant increase in utilizations over AED fixed locations.

Continuous flow, explosives vapor generator and sensor chamber.

A novel liquid injection vapor generator (LIVG) is demonstrated that is amenable to low vapor pressure explosives, 2,4,6-trinitrotoluene and hexahydro-1,3,5-trinitro-1,3,5-triazine. The LIVG operates in a continuous manner, providing a constant and stable vapor output over a period of days and whose concentration can be extended over as much as three orders of magnitude. In addition, a large test atmosphere chamber attached to the LIVG is described, which enables the generation of a stable test atmosphere with controllable humidity and temperature. The size of the chamber allows for the complete insertion of testing instruments or arrays of materials into a uniform test atmosphere, and various electrical feedthroughs, insertion ports, and sealed doors permit simple and effective access to the sample chamber and its vapor.

Strain-induced anisotropic transport properties of LaBaCo2O5.5+δ thin films on NdGaO3 substrates.

Thin films of double-perovskite structural LaBaCo2O5.5+δ were epitaxially grown on (110) NdGaO3 substrates by pulsed laser deposition. Microstructural studies by high-resolution X-ray diffraction and transmission electron microscopy revealed that the films have an excellent quality epitaxial structure. In addition, strong in-plane anisotropic strains were measured. Electrical transport properties of the films were characterized by an ultra-high-vacuum four-probe scanning tunneling microscopy system at different temperatures. It was found that the anisotropic in-plane strain can significantly tune the values of film resistance up to 590%.

Dynamic headspace generation and quantitation of triacetone triperoxide vapor.

Two methods for quantitation of triacetone triperoxide (TATP) vapor using a programmable temperature vaporization (PTV) inlet coupled to a gas chromatography/mass spectrometer (GC/MS) have been demonstrated. The dynamic headspace of bulk TATP was mixed with clean humid air to produce a TATP vapor stream. Sampling via a heated transfer line to a PTV inlet with a Tenax-TA™ filled liner allowed for direct injection of the vapor stream to a GC/MS for vapor quantitation. TATP was extracted from the vapor stream and subsequently desorbed from the PTV liner for splitless injection on the GC column. Calibration curves were prepared using solution standards with a standard split/splitless GC inlet for quantitation of the TATP vapor. Alternatively, vapor was sampled onto a Tenax-TA™ sample tube and placed into a thermal desorption system. In this instance, vapor was desorbed from the tube and subsequently trapped on a liquid nitrogen cooled PTV inlet. Calibration curves for this method were prepared from direct liquid injection of standards onto samples tube with the caveat that a vacuum is applied to the tube during deposition to ensure that the volatile TATP penetrates into the tube. Vapor concentration measurements, as determined by either GC/MS analysis or mass gravimetry of the bulk TATP, were statistically indistinguishable. Different approaches to broaden the TATP vapor dynamic range, including diluent air flow, sample chamber temperature, sample vial orifice size, and sample size are discussed. Vapor concentrations between 50 and 5400ngL(-1) are reported, with stable vapor generation observed for as long as 60 consecutive hours.

Pico-force optical exchange (pico-FOX): utilizing optical forces applied to an orthogonal electroosmotic flow for particulate enrichment from mixed sample streams.

Results are reported from a combined optical force and electrokinetic microfluidic device that separates individual particulates from molecular components in a mixed sample stream. A pico-Newton optical force was applied to an orthogonal electroosmotic flow carrying a hydrodynamically pinched, mixed sample, resulting in the separation of the various particles from the sample stream. Different combinations of polystyrene, PMMA, and silica particles with a commercially available dye were utilized to test the different separation modes available, from purely optical force to combined optical and electrophoretic forces. The impact of various particle properties on particle separation and separation efficiency were explored, including size (2, 6, 10 µm), refractive index, and electrophoretic mobility. Particle addressability was achieved by moving particles to different outlets on the basis of particle size, refractive index, and electrophoretic differences. Separations of 6 and 10 µm polystyrene particles led to only 3% particle contamination in the original sample stream and interparticle type enrichment levels >80%. The unique addressability of three different particle materials (polystyrene, PMMA, and silica) of the same size (2 µm) led to each being separated into a unique outlet without measurable contamination of the other particle types using optical force and electrophoretic mobility. In addition to particle separation, the device was able to minimize dye diffusion, leading to >95% dye recovery. This combined platform would have applications for noninvasive sample preparation of mixed molecular/particulate systems for mating with traditional analytics as well as efficient removal of harmful, degrading components from complex mixtures.

Orthogonal optical force separation simulation of particle and molecular species mixtures under direct current electroosmotic driven flow for applications in biological sample preparation.

Presented here are the results from numerical simulations applying optical forces orthogonally to electroosmotically induced flow containing both molecular species and particles. Simulations were conducted using COMSOL v4.2a Multiphysics® software including the particle tracking module. The study addresses the application of optical forces to selectively remove particulates from a mixed sample stream that also includes molecular species in a pinched flow microfluidic device. This study explores the optimization of microfluidic cell geometry, magnitude of the applied direct current electric field, EOF rate, diffusion, and magnitude of the applied optical forces. The optimized equilibrium of these various contributing factors aids in the development of experimental conditions and geometry for future experimentation as well as directing experimental expectations, such as diffusional losses, separation resolution, and percent yield. The result of this work generated an optimized geometry with flow conditions leading to negligible diffusional losses of the molecular species while also being able to produce particle removal at near 100% levels. An analytical device, such as the one described herein with the capability to separate particulate and molecular species in a continuous, high-throughput fashion would be valuable by minimizing sample preparation and integrating gross sample collection seamlessly into traditional analytical detection methods.