Vertical heterostructure of graphite-MoS2 for gas sensing.

2D materials, given their form-factor, high surface-to-volume ratio, and chemical functionality have immense use in sensor design. Engineering 2D heterostructures can result in robust combinations of desirable properties but sensor design methodologies require careful considerations about material properties and orientation to maximize sensor response. This study introduces a sensor approach that combines the excellent electrical transport and transduction properties of graphite film with chemical reactivity derived from the edge sites of semiconducting molybdenum disulfide (MoS2) through a two-step chemical vapour deposition method. The resulting vertical heterostructure shows potential for high-performance hybrid chemiresistors for gas sensing. This architecture offers active sensing edge sites across the MoS2 flakes. We detail the growth of vertically oriented MoS2 over a nanoscale graphite film (NGF) cross-section, enhancing the adsorption of analytes such as NO2, NH3, and water vapor. Raman spectroscopy, density functional theory calculations and scanning probe methods elucidate the influence of chemical doping by distinguishing the role of MoS2 edge sites relative to the basal plane. High-resolution imaging techniques confirm the controlled growth of highly crystalline hybrid structures. The MoS2/NGF hybrid structure exhibits exceptional chemiresistive responses at both room and elevated temperatures compared to bare graphitic layers. Quantitative analysis reveals that the sensitivity of this hybrid sensor surpasses other 2D material hybrids, particularly in parts per billion concentrations.

Probing plasma fluorinated graphene via spectromicroscopy.

Plasma fluorination of graphene is studied using a combination of spectroscopy and microscopy techniques, giving insight into the yield and fluorination mechanism for functionalization of supported graphene with both CF4 and SF6 gas precursors. Ion acceleration during fluorination is used to probe the effect on grafting functionalities. Adatom clustering, which occurs with CF4 plasma treatment, is suppressed when higher kinetic energy is supplied to the ions. During SF6 plasma functionalization, the sulfur atoms tend to bond to bare copper areas instead of affecting the graphene chemistry, except when the kinetic energy of the ions is restricted. Using scanning photoelectron microscopy, with a 100 nm spatial resolution, the chemical bonding environment is evaluated in the fluorinated carbon network at selected regions and the functionalization homogeneity is controlled in individual graphene flakes.

Large area growth of vertically aligned luminescent MoS2 nanosheets.

Vertically aligned MoS2 nanosheets (NSs) with exposed edges were successfully synthesized over a large area (∼2 cm2). The NSs were grown using an ambient pressure chemical vapor deposition technique via rapid sulfurization of sputter deposited thick molybdenum films. Extensive characterization of the grown MoS2 NSs has been carried out using high resolution scanning and transmission electron microscopy (SEM & TEM). A special care was given to the TEM lamella preparation process by means of a focused ion beam to preserve the NS growth direction. The cross-section TEM measurements revealed the growth of densely packed, vertically aligned and straight MoS2 NSs. Additional characterization techniques such as atomic force microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, and photoluminescence (PL) were used to evaluate the MoS2 NSs. These studies revealed the high crystallinity and quality of the synthesized NSs. The MoS2 NSs show visible light emission similar to mechanically exfoliated monolayer MoS2 NSs. The striking PL signal comes from the exposed edges as shown by experimental and theoretical calculations. The vertical MoS2 NSs also exhibit a hydrophobic character with a contact angle of 114°. The as-grown MoS2 NSs would be highly useful in the development of catalysis, nano-optoelectronics, gas-sensing and bio-sensing device applications.

Synthesis and characterization of MoS2 nanosheets.

Here, we report on the synthesis of MoS2 nanosheets using a simple two-step additive-free growth technique. The as-synthesized nanosheets were characterized to determine their structure and composition, as well as their optical properties. The MoS2 nanosheets were analyzed by scanning electron microscopy, transmission electron microscopy (TEM), including high-resolution scanning TEM imaging and energy-dispersive x-ray spectroscopy, x-ray photoelectron spectroscopy (XPS), Raman spectroscopy and photoluminescence (PL). The as-produced MoS2 nanosheets are vertically aligned with curved edges and are densely populated. The TEM measurements confirmed that the nanosheets have the 2H-MoS2 crystal structure in agreement with the Raman results. The XPS results revealed the presence of high purity MoS2. Moreover, a prominent PL similar to mechanically exfoliated few and mono-layer MoS2 was observed for the as-grown nanosheets. For the thin (≤50 nm) nanosheets, the PL feature was observed at the same energy as that for a direct band-gap monolayer MoS2 (1.83 eV). Thus, the as-produced high-quality, large-area, MoS2 nanosheets could be potentially useful for various optoelectronic and catalysis applications.

Application of the Hansen solubility Parameters theory to carbon nanotubes.

Carbon nanotubes (CNT) are very promising nano-objects due to their exceptional properties. However, their tendency to form bundles as well as their insolubility in common solvents makes them difficult to handle. The main way to solve the problem is chemical or physical CNTs functionalisations, with all the problems inherent to the methods. In this contribution, we present a new approach that allows predicting the solubility of carbon nanotubes in many solvents but also predicting the most appropriate solvents to use for given samples of CNTs. Solubilisation and dispersion being directly connected, the present approach of solubilisation proves also to be efficient in dispersing the CNTs bundles. This contribution is a first step toward the control of carbon nanotube's dispersion in polymers and their homogenous functionalisation. Moreover, we also report here a new method, based on solvents, to separate carbon nanotubes by size, the use of mixture of non-solvents in order to obtain good solvents and the use of mixture of good solvents to obtain higher solubility. The use of mixture of good solvents allowed us to obtain high solubility, up to three times higher then that reported in literature. We have also measured and analysed the solubility of some functionalised carbon nanotubes.

Bundles of identical double-walled carbon nanotubes.

In a sample produced by catalytic chemical vapor deposition (CCVD), the structure of the carbon nanotubes (diameter and helicity) which governs their electronic properties, is determined by electron diffraction. We found that most of the smallest bundles are constituted of identical double-walled carbon nanotubes.

Continuous-flow optical pumping NMR in a closed circuit system.

In a typical continuous-flow optical pumping setup, the chemical shift of xenon in the adsorbed phase depends on the gas flow rate due to warming of the sample surface by the gas stream. Calibration of the system using the (207)Pb resonance of solid lead nitrate is necessary to determine the actual sample temperature. Optimum pulse repetition rates are strongly affected by gas flow and spin-lattice relaxation rates. The interplay of flow and pulse repetition rate alters signal intensity ratios and may lead to the complete suppression of signals.