[Biomimetic approach to dental tissue restorations: Which biomaterials, which prospects?] / Approche biomimétique des restaurations des tissus dentaires - Quels biomatériaux, quelles perspectives ?

Title: Approche biomimétique des restaurations des tissus dentaires - Quels biomatériaux, quelles perspectives ? Abstract: Les dents constituent un organe particulier. Elles permettent la fonction masticatrice, participent à la phonation et ont un rôle important dans les relations sociales. Elles doivent résister à des variations de température, comprises entre 5 °C et 55 °C, aux contraintes mécaniques de la mastication, et aux acides présents dans l'alimentation.

The dental triage method at Rothschild Hospital during the first lockdown due to the COVID-19 pandemic.

OBJECTIVE: This study aims to (1) assess the efficacy of a face-to-face emergency protocol in children and adults and (2) measure the efficacies of prediagnosis at the triage level and clinical diagnosis at the emergency department level during the COVID-19 pandemic. METHODS: A triage protocol was applied for patients at the entry of the Rothschild Hospital (AP-HP) between March 18th and May 11th, 2020. First, patients underwent a triage based on self-reported symptoms. If their condition was deemed urgent, they were oriented toward dental professionals, who performed an intraoral examination leading to a clinical diagnosis. Triage and diagnoses were categorized into four emergency groups: infectious, prosthetic, traumatic, and others. The agreement between triage and clinical diagnosis was tested (χ2 test). Positive predictive value (PPV), negative predictive value (NPV), sensitivity, and specificity for each diagnostic category were assessed to evaluate the performance and efficacy of the triage. RESULTS: Out of 1562 dental visits, 1064 were included in this analysis. The most frequently reported symptoms by children at triage were pain (31.5%) and trauma (22%). Adults mainly complained of abscesses (45.1%) and pulpitis (20.5%). The most frequent clinical diagnoses were abscesses (29.2%) and pulpitis (20.5%) among children and adults, respectively. Tooth extraction was the most frequent treatment modality. Systemic antibiotics were prescribed for 49.2% of patients. Regardless of the age class, the PPV was high for groups 1 to 3, ranging from 78.9% to 100%. The NPV was high in all groups, ranging from 68.8% to 99.1%. CONCLUSION: This study demonstrates that the triage implanted during the first COVID-19 lockdown was effective and is an appropriate tool for the referral of adults and children before clinical examination.

Experimental Investigation of Dental Composites Degradation After Early Water Exposure.

While dental composite long-term aging has already been studied in the past, no data exist about the early aging while it might be detrimental regarding the composites' longevity. This study aims to better understand the effects of early water exposure on dental composites. Dental resin composites with different fillers ratio were subjected to water exposure during 24 h, 1 week, or 1 month. After photopolymerization, the samples were stored at different conditions, whether in wet or dry condition (W, D, respectively) and in wet conditions after a first 24 h storage in dry conditions (DW). Three-point bending tests were performed to measure the flexural modulus. The samples were then subjected to a sorption/desorption protocol. While the matrix alone did not undergo any mechanical degradation with exposure time, the composites matrices presented a decrease in elastic modulus. This decrease was the highest for the matrix with nonsilanized fillers. Interestingly, the DW condition was detrimental for all the samples. Regarding the sample with nonsilanized fillers in DW for 1 month presented an elastic modulus lower than the matrix alone. These results were assigned to the sorption capacity of the polymer matrix, suggesting that the diffusion mechanisms and the nature of water molecules are determinant in the composite degradation. This study showed that dental composite early degradation mechanisms after water exposure are involved in the polymer matrix postpolymerization process as soon as after 24 h. Such mechanisms are detrimental in terms of the dental composite efficiency and have to be understood.

The effect of therapeutic radiation on dental enamel and dentin: A systematic review.

OBJECTIVES: The conventional radiotherapy protocol to treat head-and-neck cancer is usually followed by tooth-decay onset. Radiation impact on mineralized tooth structures is not well-understood. This systematic review aimed to collect the recorded effects of therapeutic radiation on tooth chemical, structural and mechanical properties, in relation with their means of investigation. DATA: Systematic search (January 01 2012 - September 30 2021) terms were "Radiotherapy", "Radiation effects", "Dental enamel", "Dentin", "Human" and "Radiotherapy" NOT "Laser". SOURCES: PubMed, DOSS and Embase databases were searched. STUDY SELECTION: Selected studies compared dental enamel, coronal and root dentin properties before and after in vitro or in vivo irradiation up to 80 Gy. RESULTS: The systematic search identified 353 different articles, with 28 satisfying inclusion criteria. Their reference lists provided two more. Twenty-two studies evaluated dental enamel evolution, nine assessed coronal dentin and eight concerned root dentin. Coronal and root dentin results indicate a major impact of the radiation on their organic matrix. Dental enamel's chemical properties are less modified. Enamel and root dentin's hardness are decreased by therapeutic radiation, but no consensus arises for coronal dentin. CONCLUSIONS: Our findings revealed some interesting information about enzymatic degradation mechanisms of dentin organic matrix and highlighted that dental hard-tissue characterization requires highly specific expertise in materials science. That scientific knowledge is necessary to design suitable protocols, adequately analyze the obtained data, and, thus, provide relevant conclusions. CLINICAL SIGNIFICANCE STATEMENT: Better knowledge and understanding of the mechanisms involved in the degradation of enamel and dentin would enable development of new preventive and therapeutic methods for improved medical care of patients undergoing radiotherapy.

Comparison of physical and biological properties of a flowable fiber reinforced and bulk filling composites.

OBJECTIVE: To evaluate in vitro the mechanical, biological, and polymerization behavior of a flowable bulk-fill composite with fibers as a dispersed phase. METHODS: EverX Flow™ (GC Corporation) (EXF), one conventional bulk-fill composite (Filtek™ Bulk Fill Posterior Restorative, 3 M (FBF)), and one flowable bulk composite without fibers (SDR® flow+, Dentsply (SDR)) were tested. Samples were characterized in terms of flexural strength (ISO 4049), fracture toughness (ISO 20795-1), and Vickers hardness. Polymerization stress and volumetric shrinkage were evaluated. The in vitro biological assessment was achieved on cultured primary Human Gingival Fibroblast cells (HGF). The cell metabolic activity was evaluated using Alamar Blue assay at 1, 3, and 5 days of contact to the 3 tested composite extracts (ISO 10993) and cell morphology was evaluated by confocal microscopy. Data were submitted to One-Way analysis of variance (ANOVA) and independent t-test (α = 0.05). RESULTS: FBF showed statistically higher Vickers hardness and flexural modulus than EXF and SDR. However, EXF showed statistically higher KIC than FBF and SDR. EXF had the statistically highest shrinkage stress values and FBF the lowest. Archimedes volumetric shrinkage showed significantly lower values for FBF as compared to the other two composites. Slight cytotoxic effect was observed for the three composites at day one. An enhancement of metabolic activity at day 5 was observed in cells treated with EXF extracts. SIGNIFICANCE: EXF had a significantly higher fracture toughness validating its potential use as a restorative material in stress bearing areas. EXF showed higher shrinkage stress values, and less cytotoxic effect. Fiber reinforced flowable composite is mainly indicated for deep and large cavities, signifying the importance for assessing its shrinkage stress and biological behavior.

Impact of the Microstructure of CAD/CAM Blocks on the Bonding Strength and the Bonded Interface.

PURPOSE: To investigate the relationship between the microstructure of CAD/CAM blocks and the quality of adhesion as function of the surface treatment and resin cement type. MATERIALS AND METHODS: Two nano-ceramic composite resin CAD/CAM blocks, Lava Ultimate (LU) and Cerasmart (CS), and two Leucite-reinforced glass ceramic CAD/CAM IPS blocks, Empress® CAD (EM) and InitialTM LRF (IR), received either Hydrofluoric acid (HF) or sandblasting (SB) surface treatments. The blocks were then luted using two dual-cure resin cements, LinkForce (LF) and Multilink Automix (ML) with their corresponding silanes, resulting in 16 study groups. The luted blocks were then thermal-cycling (TC) for 5000 cycles and subjected to a microtensile bond strength (µTBS) test. Scanning electron microscopy (SEM) micrographs of the treated surfaces were analyzed using ImageJ software and XRD analyses were performed for the two ceramic blocks. The data obtained were submitted to Games-Howell post-hoc nonparametric test to compare combinations of groups or treatments and a linear mixed-effects model for the factors surface treatment, block type, and resin cement, together with their first-degree interactions (α = 0.05). RESULTS: The lowest mean µTBS values were obtained with LU-HF, whereas the highest mean µTBS values were obtained with CS regardless of resin cement type and surface treatment method. IR-HF mean µTBS were significantly higher than IR-SB, EM-SB, and EM-HF. Analysis using ImageJ software demonstrated significant differences in the density and pore size after HF surface treatment. CONCLUSIONS: The specific microstructure of each block material within the same family group impacted the micromechanical retention and the bonded interface strength.

Knowledge and Opinions of French Dental Students in Operative Dentistry - Management of Deep Carious Lesions.

PURPOSE: A questionnaire survey was recently undertaken among French dental students (FDSs) to investigate their practices, knowledge and opinions in various domains of minimal intervention (MI) in cariology. The present work focuses on management of deep carious lesions (DCLs). MATERIALS AND METHODS: The questionnaire was administered (Spring 2018) to all the fifth-year students of the 16 French dental schools. Descriptive analyses were performed. RESULTS: Among 1370 FDSs (response rate: 84.5%), hardness was the most commonly reported criterion for assessing the endpoint of carious tissue removal (53.9%), followed by firm dentin (40.0%). Regarding FDSs' opinion of leaving carious dentine under a restoration, 41.9% of the respondents agreed that carious tissues should always be removed completely. For an asymptomatic tooth with DCLs and exposed pulp, direct pulp capping was mainly chosen (93.9%). In a clinical case correctly diagnosed as a reversible pulpitis by 79.7% of respondents, nearly half of FDSs chose a one-step complete excavation (48.3%) followed by selective excavation (25.1%), then two-step complete excavation (20.9%) and a minority (5.7%) opted for pulpal therapy (biopulpotomy or endodontic treatment). CONCLUSION: The present results suggest an inadequate dissemination of MI concepts among FDSs towards DCL management. The present results show the need for a harmonisation and a reinforcement of teaching evidence-based MI according to the latest European recommendations.

Eating disorders through the periodontal lens.

People with eating disorders suffer from a mental disorder that negatively affects their physical and/or mental health. The three most frequent eating disorders are binge eating disorder, bulimia nervosa, and anorexia nervosa. Environmental and genetic factors are involved in the pathogenesis of eating disorders in vulnerable persons. Although treatment varies among different types of eating disorders, nutrition, medical care combined with psychotherapy and medications are standard of care. The aim of this review is to give an overview of the oral health impact of eating disorders with a special emphasis on the periodontium. Oral health professionals have a unique role to play in the early diagnosis of eating disorders because of the important impact that eating disorders have on the oral cavity. In vomiting-associated eating disorders, the risk of erosive tooth wear is mainly localized to the palatal surfaces of the incisors. Emerging evidence also indicates a high frequency of gingivitis and gingival recessions associated with compulsive toothbrushing. A holistic approach, including oral health and functional rehabilitation, should be promoted by physicians, psychiatrists, and dentists for people with eating disorders.

Knowledge and Opinions of French Dental Students Toward Occlusal and Proximal Restorative Thresholds.

PURPOSE: To investigate the practices, knowledge and opinions of French dental students (FDSs) in various domains of minimal intervention (MI) in cariology. MATERIALS AND METHODS: A cross-sectional, questionnaire-based study was conducted in spring 2018 among all fifth-year French dental students (FDSs) from the 16 French dental schools. The present article focuses on restorative management. Statistical analyses (descriptive, chi-squared) were performed. RESULTS: The response rate was 84.5%. Overall, 97.4% of respondents would have operatively intervened for proximal and 83% for occlusal carious lesions, respectively, while non-or micro-invasive intervention would have been possible. Interestingly, 15% would completely open the occlusal fissures. For both occlusal and proximal lesions requiring a restoration, composite resin was indicated by over 95% of the respondents. In a clinical case, 51.6% of FDSs who rightly diagnosed an enamel carious lesion would operatively intervene. When FDSs could not diagnose the type of carious lesions, a high proportion of invasive actions were also reported (40%). FDSs who read scientific articles were more likely to consider the high importance of not filling sound teeth unnecessarily (p = 0.033). CONCLUSION: FDSs do not have sufficient awareness of MI guidelines regarding occlusal and proximal restorative thresholds. Efforts are required in dental schools to teach FDSs to postpone invasive/restorative strategies to later stages of carious progression. There is a need to strengthen prevention techniques and non-invasive options in the teaching of MI in cariology.

Consideration of Dental Tissues and Composite Mechanical Properties in Secondary Caries Development: A Critical Review.

Different kinds of interactions between the restorative material and mineralized dental tissues result in secondary caries around dental composites. Of these, the mechanical interactions have to be carefully investigated. Due to the elastic mismatch between dental tissues and the composite restoration, complex stresses and strains develop at their interface. This complex mechanical environment disturbs the demineralization-remineralization equilibrium of dental hard tissues. The fluid flow both over and within enamel and dentin, associated with their complex ultrastructure and mechanical behavior, is a key factor. It is known that external mechanical loading can indirectly promote the dissolution of enamel and dentin through a pumping action of cariogenic fluids in and out of microgaps at the interface between mineralized tissues and composite. Mechanical loading can also directly influence the physicochemical behavior of dental hard tissues by inducing complex strain and stress fields on the crystal scale. It is important to consider both the direct and indirect paths by which mechanical loading can influence the apatite dissolution kinetics. Therefore, a systematic approach should be used to investigate the mechanism of secondary caries formation considering the tooth-composite interface as a unique complex in which each element has an influence on the other.

Risk Factors for Oral Health in Anorexia Nervosa: Comparison of a Self-Report Questionnaire and a Face-to-Face Interview.

Behavioral, nutritional, and local risk factors for oral health are frequent in people with anorexia nervosa. However no self-report questionnaire is available for screening in clinical practice or for research purposes. The objective of this study was to design a questionnaire to identify risk factors and symptoms of oral diseases and to test its reliability as a self-report form among people with anorexia nervosa. A 26-item questionnaire was designed based on a sound literature review performed by a group of dentists, psychiatrists, and epidemiologists specialized in the field of eating disorders. Sixty-nine anorexia nervosa inpatients (mean age 18.72 ± 5.1) were included from four specialized units. The questionnaire was first self-reported by the patients, then the same questionnaire was administrated by a dentist during a structured face-to-face interview as the gold standard. The concordance between the two forms was evaluated globally and item per item using Cohen's kappa statistical tests. The overall concordance between the self-report questionnaire and the face-to-face structured interview was 55%. Of the 26 items, 19 showed significant concordance. Items relating to water intake, extracted teeth, gingival status, and oral hygiene had the best concordance (all kappa coefficients > 0.4). A questionnaire that identifies risk factors and symptoms of oral diseases in anorexia nervosa was developed and tested. The 26-item form of the questionnaire (long version) is moderately reliable as a self-reported form. A short version of the questionnaire, including the 10 most reliable items, is recommended for oral risk assessment in patients with anorexia nervosa. The clinical value of the self-administered questionnaire remains to be evaluated.

Interface between calcium silicate cement and adhesive systems according to adhesive families and cement maturation.

OBJECTIVES: This study aimed to evaluate the interface between a calcium silicate cement (CSC), Biodentine and dental adhesives in terms of sealing ability. MATERIALS AND METHODS: Microleakage test: 160 standardized class II cavities were prepared on 80 extracted human molars. The cavities were filled with Biodentine and then divided into 2 experimental groups according to the time of restoration: composite resin obturation 15 minutes after Biodentine handling (D0); restoration after 7 days (D7). Each group was then divided into 8 subgroups (n = 5) according to the adhesive system used: etch-and-rinse adhesive (Prime & Bond); self-etch adhesive 2 steps (Optibond XTR and Clearfil SE Bond); self-etch adhesive 1 step (Xeno III, G-aenial Bond, and Clearfil Tri-S Bond); and universal used as etch-and-rinse or self-etch (ScotchBond Universal ER or SE). After thermocycling, the teeth were immersed in a silver nitrate solution, stained, longitudinally sectioned, and the Biodentine/adhesive percolation was quantified. Scanning electron microscopic observations: Biodentine/adhesive interfaces were observed. RESULTS: A tendency towards less microleakage was observed when Biodentine was etched (2.47%) and when restorations were done without delay (D0: 4.31%, D7: 6.78%), but this was not significant. The adhesives containing 10-methacryloyloxydecyl dihydrogen phosphate monomer showed the most stable results at both times studied. All Biodentine/adhesive interfaces were homogeneous and regular. CONCLUSIONS: The good sealing of the CSC/adhesive interface is not a function of the system adhesive family used or the cement maturation before restoration. Biodentine can be used as a dentine substitute.

Mesoporous Bioactive Glasses Cytocompatibility Assessment: A Review of In Vitro Studies.

Thanks to their high porosity and surface area, mesoporous bioactive glasses (MBGs) have gained significant interest in the field of medical applications, in particular, with regards to enhanced bioactive properties which facilitate bone regeneration. The aim of this article is to review the state of the art regarding the biocompatibility evaluation of MBGs and provide a discussion of the various approaches taken. The research was performed using PubMed database and covered articles published in the last five years. From a total of 91 articles, 63 were selected after analyzing them according to our inclusion and exclusion criteria. In vitro methodologies and techniques used for biocompatibility assessment were investigated. Among the biocompatibility assessment techniques, scanning electron microscopy (SEM) has been widely used to study cell morphology and adhesion. Viability and proliferation were assessed using different assays including cell counting and/or cell metabolic activity measurement. Finally, cell differentiation tests relied on the alkaline phosphatase assay; however, these were often complemented by specific bimolecular tests according to the exact application of the mesoporous bioactive glass. The standardization and validation of all tests performed for MBG cytocompatibility is a key aspect and crucial point and should be considered in order to avoid inconsistencies, bias between studies, and unnecessary consumption of time. Therefore, introducing standard tests would serve an important role in the future assessment and development of MBG materials.

Knowledge and opinions of French dental students related to caries risk assessment and dental sealants (preventive and therapeutic).

OBJECTIVES: A national questionnaire study was performed to document knowledge and opinions of French dental students (FDSs) about minimal intervention (MI) in dentistry especially caries risk assessment (CRA) and dental sealants (DSs). MATERIALS AND METHODS: A questionnaire was administered to the fifth-year dental FDSs (n = 1370) from the 16 French dental schools. Descriptive and statistical analyses were performed. RESULTS: The response rate was 84.5%. A large majority of respondents (87.8%) linked MI with minimally invasive dentistry and 77.4% considered MI as a concept based on prevention. About 80% stated they use CRA in clinical practice, mostly without any specific form. If 80.4% of the respondents would base their treatment plans on CRA, only 55.1% would regularly plan preventive regimens according to individual risk level. However, while 96.6% declared they perform preventive DSs, only 44.3% considered therapeutic sealants as a routine treatment. Although 75.1% of FDSs stated that they had sufficient learning and training related to CRA, 55.9% thought that they need further education about preventive and therapeutic DSs. CONCLUSION: Although FDSs seem to be aware of the importance of CRA and preventive strategies, this study shows the need to harmonize the teaching in cariology according to the latest European recommendations. CLINICAL RELEVANCE: A national questionnaire study showed variability towards knowledge and opinions of FDSs related to MI in cariology. This may impact care provisions in their future professional life showing the urgent need to harmonize the teaching of MI in cariology in France.

The influence of experimental bioactive glasses on pulp cells behavior in vitro.

OBJECTIVES: To assess in vitro the effect of experimental mesoporous BAG, on human dental pulp cells (hDPCs) behavior in terms of cytocompatiblity and bioactivity via mineralization potential. METHODS: Fine (FP) and large particles (LP) of a fixed BAG composition named 0NaMBG have been elaborated by a sol-gel process. In vitro assessment was achieved on cultured primary hDPCs using indirect contact. The effect of the concentration of 800µg/mL on cell metabolic activity and cytotoxicity were examined by performing Alamar blue and crystal violet assays. Alizarin Red staining was used to detect and quantify the formation of mineralized nodules and ALP activity was colourimetrically quantified. The expression of Odontogenic markers: DMP-1 and osteopontin (OPN) expression and cell morphology was evaluated by confocal microscopy. RESULTS: According to the Alamar blue and crystal violet assay, 0NaMBG samples were non-cytotoxic. Cells treated with 0NaMBG particles expressed higher metabolic activity than control cells, especially for LP. Both FP and LP significantly increased both extra and intra cellular ALP activity. hDPCs exhibited good cell spreading and adhesion in the presence of FP and LP extracts by confocal imaging. Further, Alizarin red S assay demonstrated more mineralization nodules and significant enhancement of the extracellular calcium deposition when cells were interfaced with both FP and LP compared to the control cells. Moreover, LP extracts enhanced the production and secretion of odontogenic markers: dentin matrix protein 1 (DMP-1) and osteopontin. SIGNIFICANCE: LP have a higher surface area and pore volume, which could explain their greater bioactivity in contact with pulp cells. The clinical relevance of these findings implicate that 0NaMBG could be used as fillers in dental therapeutic materials suitable for dentin and/or pulp tissues preservation.

Bioactivity assessment of bioactive glasses for dental applications: A critical review.

OBJECTIVE: In the context of minimally invasive dentistry and tissue conservation, bioactive products are valuable. The aim of this review was to identify, clarify, and classify the methodologies used to quantify the bioactive glasses bioactivity. METHODS: Specific search strategies were performed in electronic databases: PubMed, Embase, Cochrane Library, and Scopus. Papers were selected after a review of their title, abstract, and full text. The following data were then examined for final selection: BAG investigated, objectives, criteria, methods, and outcomes. RESULTS: Sixty-one studies published from 2001 to 2019, were included. The bioactivity of BAG can be evaluated in vitro in contact with solutions, enamel, dentin, or cells. Other studies have conducted in vivo evaluation by BAG contact with dentin and dental pulp. Studies have used various analysis techniques: evaluation of apatite with or without characterization or assessment of mechanical properties. Reprecipitation mechanisms and pulp cell stimulation are treated together through the term 'bioactivity'. SIGNIFICANCE: Based on these results, we suggested a classification of methodologies for a better understanding of the bioactive properties of BAG. According to all in vitro studies, BAG appear to be bioactive materials. No consensus has been reached on the results of in vivo studies, and no comparison has been conducted between protocols to assess the bioactivity of other bioactive competitor products.

High serum ferritin levels are associated with a reduced periodontium in women with anorexia nervosa.

PURPOSE: Impaired oral health is a well-known complication in individuals with eating disorders, although this is difficult to identify by mental health professionals. The aim of this study was to evaluate the relationship between routine blood parameters and two oral health outcomes (dental erosion, reduced periodontium) in women with eating disorders. METHODS: A face-to-face interview and a clinical oral examination were carried out in a cohort of 70 women from an addiction and psychiatry hospital unit. Biochemical and hematological parameters were collected in medical records at admission. Biological factors associated with a generalized reduced periodontium (≥ 30% of sites with clinical attachment loss ≥ 3 mm) and dental erosion [a basic erosive wear examination (BEWE) score ≥ 3] were determined by logistic regression models. RESULTS: Forty-five women with either anorexia nervosa (n = 27) or bulimia nervosa (n = 18) were included in the study. None of the women had active periodontitis or other inflammatory comorbidity. Women with ≥ 30% of sites with clinical attachment loss ≥ 3 mm and those with a BEWE score ≥ 3 were older than women that did not exhibit a generalized reduced periodontium or dental erosion (37.1 ± 10.4 versus 28.8 ± 7.4, p < 0.01 and 35.2 ± 9.7 versus 28.1 ± 7.8, p = 0.01), respectively. After adjustments for age and duration of eating disorder, high serum ferritin levels were associated with a generalized reduced periodontium [OR (95%CI) = 1.04 (1.01; 1.07)]. No association was found between biological factors and dental erosion. CONCLUSION: Serum ferritin levels together with age may be helpful to mental health professionals in screening patients with eating disorders for adequate referral to a dentist. LEVEL III: Evidence obtained from a case-control analytic study.

Polymerization shrinkage of resin-based composites for dental restorations: A digital volume correlation study.

OBJECTIVE: Resin-based composites are widely used in dental restorations; however, their volumetric shrinkage during polymerization leads to several issues that reduce the restoration survival rates. For overcoming this problem, a deep study of shrinkage phenomena is necessary. METHODS: In this study, micro-tomography (µ-CT) is combined with digital volume correlation (DVC) to investigate the effect of several factors on the polymerization strain of dental composites in model cavities: the presence/absence of an adhesive, the use of transparent/blackened cavities, and irradiation times between 1 and 40s. RESULTS: The results indicate that the presence of an adhesive at the interface between the cavity and composite does not reduce the total strain but instead limits it to a preferential direction. In addition, regardless of the conditions, the main strain is generated along the axis parallel to the polymerization irradiation (the vertical axis). Finally, the total strain appears to occur in the first 5s of irradiation, with no further evolution observed for longer irradiation times. SIGNIFICANCE: This work provides new insight into resin-based composite shrinkage and demonstrates the benefit of coupling DVC and µ-CT to better understand the degradation mechanisms of these materials.

Dental and periodontal health in adults with eating disorders: A case-control study.

OBJECTIVES: This study evaluates dental and periodontal health in anorexia nervosa and bulimia nervosa patients. METHODS: Seventy females with eating disorders (36 anorexia nervosa) attending a public hospital Psychiatry and Addiction unit were compared with age-matched controls (n = 70). Full-mouth examination and oral hygiene behaviours were recorded for all participants. RESULTS: More frequent dental attendance and toothbrushing were observed in patients with eating disorders than in controls (p < 0.01), while lower plaque index and bleeding on probing were observed in controls than in patients (p ≤ 0.03). Percentages of sites with gingival recession >2 mm were higher in patients with eating disorders than in controls (2.3 ± 4.1 versus 0.0 ± 0.1, p < 0.01). The BEWE score >2 was significantly more frequent in bulimia nervosa patients than in anorexia nervosa patients (76.5% versus 41.7%, p < 0.01). Regarding periodontal parameters, mean plaque index, bleeding on probing and clinical attachment loss were increased in anorexia nervosa patients compared to bulimia nervosa patients. CONCLUSIONS: The present data suggest different oral health approaches in eating disorder patients according to diagnosis type. CLINICAL SIGNIFICANCE: Periodontal and dental health should be considered rigorously in patients with eating disorders. Personalized oral hygiene recommendations and treatments can be delivered according to the type of eating disorder.

Marginal and internal fit of CAD-CAM inlay/onlay restorations: A systematic review of in vitro studies.

STATEMENT OF PROBLEM: Different parameters can influence the adaptation of computer-assisted design and computer-assisted manufacturing (CAD-CAM) inlay/onlay restorations. However, systematic reviews to identify and discuss these parameters are lacking. PURPOSE: The purpose of this systematic review was to summarize the scientific literature investigating all parameters that can influence both the marginal and internal adaptation of CAD-CAM inlay/onlay restorations. MATERIAL AND METHODS: An electronic search was conducted by 2 independent reviewers for studies published in English between January 1, 2007 and September 20, 2017 on the PubMed/MEDLINE, Scopus, and Web of Science databases and in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. Factors investigated in the selected articles included the type of CAD-CAM system, virtual space parameters, version of the software, type of block, luting procedure, type of restoration, sample size and aging procedure, evaluation method, and number of measurement points per specimen. RESULTS: A total of 162 articles were identified, of which 23 articles met the inclusion criteria. Nine studies investigated adaptation with different restorative materials, 2 evaluated adaptation according to the type of preparation design, 9 compared adaptation before/after thermomechanical loading, and 2 before/after cementation, 1 study investigated marginal adaptation based on whether the optical scan was made intraorally or extraorally, 1 compared adaptation with 5 and 3 axis CAM systems, and 1 assessed adaptation with 4 different intraoral scanners. The risk of bias was high for 7, medium for 15, and low for 1 of the studies reviewed. The high level of heterogeneity across the studies excluded meta-analysis. CONCLUSIONS: Most of the studies reported clinically acceptable values for marginal adaptation. The performance of a CAD-CAM system is influenced by the type of restorative material. A nonretentive cavity preparation exhibited better adaptation than a retentive preparation. Most studies showed that thermomechanical loading affected the quality of marginal adaptation. Cementation increased marginal discrepancies. No statistically significant difference was found for marginal fit of onlays between intraoral and extraoral optical scans using a stone die. The number of milling axes, the type of digital camera, and the region measured were statistically significant in relation to marginal/internal adaptation. Values of adaptation recorded failed to reproduce the preestablished spacer parameters in the software. Clarification is needed concerning adaptation according to the type of preparation design, the type of material, the choice of intrinsic parameters for the CAD process, the type and shape of milling instruments, and the behavior of the material during milling. Adaptation of CAD-CAM inlay/onlays should be evaluated under clinical conditions.