Design of 3D scaffolds for tissue engineering testing a tough polylactide-based graft copolymer.

The aim of this research was to investigate a tough polymer to develop 3D scaffolds and 2D films for tissue engineering applications, in particular to repair urethral strictures or defects. The polymer tested was a graft copolymer of polylactic acid (PLA) synthesized with the rationale to improve the toughness of the related PLA homopolymer. The LMP-3055 graft copolymer (in bulk) demonstrated to have negligible cytotoxicity (bioavailability >85%, MTT test). Moreover, the LMP-3055 sterilized through gamma rays resulted to be cytocompatible and non-toxic, and it has a positive effect on cell biofunctionality, promoting the cell growth. 3D scaffolds and 2D film were prepared using different LMP-3055 polymer concentrations (7.5, 10, 12.5 and 15%, w/v), and the effect of polymer concentration on pore size, porosity and interconnectivity of the 3D scaffolds and 2D film was investigated. 3D scaffolds got better results for fulfilling structural and biofunctional requirements: porosity, pore size and interconnectivity, cell attachment and proliferation. 3D scaffolds obtained with 10 and 12.5% polymer solutions (3D-2 and 3D-3, respectively) were identified as the most suitable construct for the cell attachment and proliferation presenting pore size ranged between 100 and 400µm, high porosity (77-78%) and well interconnected pores. In vitro cell studies demonstrated that all the selected scaffolds were able to support the cell proliferation, the cell attachment and growth resulting to their dependency on the polymer concentration and structural features. The degradation test revealed that the degradation of polymer matrix (ΔMw) and water uptake of 3D scaffolds exceed those of 2D film and raw polymer (used as control reference), while the mass loss of samples (3D scaffold and 2D film) resulted to be controlled, they showed good stability and capacity to maintain the physical integrity during the incubation time.

Sub-unit vaccine against S. aureus-mediated infections: set-up of nano-sized polymeric adjuvant.

The aim of this work was the design of a novel adjuvanted system for vaccination against S. aureus-mediated infections: in particular, poly-lactide-co-glycolide (PLGA) nanoparticles were developed in order to efficiently load and boost a sub-unit model vaccine, namely a purified recombinant collagen binding bacterial adhesin fragment (CNA19). At first, the assessment of the actual immunogenicity of free CNA19 via subcutaneous administration was evaluated, in order to consider it as subunit antigen model. Secondly, for the development of CNA19 loaded PLGA nanoparticles, a preliminary study was focused on the production of well-formed nanoparticles by w/o/w double emulsion method exploiting ultrasonication cycles under mild conditions, then the optimization of the freeze-drying conditions and different CNA19 loading methods were considered (encapsulation, adsorption of on blank or CNA19 encapsulated nanoparticles). The set-up preparation method (process yield of about 83%) permitted to obtain CNA19 loaded nanoparticles with spherical shape, narrow size distribution (187.41 ± 51.2 nm), a slightly negative zeta-potential (-2.91 ± 0.64 mV) and to elicit satisfactory protein encapsulation efficiency (75.91 ± 4.22%) and loading capacity (8.59 ± 0.33 µg CNA19/nanoparticles mg). Then, CNA19 loaded PLGA nanoparticles were characterized by (i) an in vitro release test performed at different temperatures, namely 4°C, 25°C and 37°C, testing the antigen integrity (SDS-PAGE) and activity (ELISA); (ii) an in vitro stability study in terms of dimension and surface charge performed in a 21 days period of time. At 37°C there was evidence of a sustained release of the antigen, in active form, for almost 240 h with a burst release of about 20% in the first 2h. At 4°C stability tests and activity assays allowed to identify storage conditions useful to maintain CNA19 activity and easily NP re-suspendability with intact physical characteristics. Furthermore the evaluation of CNA19 loaded nanoparticles cytotoxicity (up to 10.652 mg PLGA/ml) by MTT assay and the study of cellular up-take assessed on human fibroblasts confirmed the feasibility to formulate a dosage form useful for vaccination against S. aureus-mediated infections.

[A new location of angiokeratoma circumscriptum]. / Une nouvelle localisation de l'angiokératome circonscrit næviforme.

BACKGROUND: Angiokeratomas are papular telangiectasias having a common histology of ectasia of the superficial dermal vessels surmounted by a hyperkeratotic epidermis. PATIENTS AND METHODS: The patient was a 9-year-old girl born of non-consanguineous parents after a well-followed pregnancy with problem-free delivery at term. From birth, she had a tumefaction of the left side of the nose and the left half of the upper lip that gradually increased in size without obstructing the nasal orifice and bled easily. Examination revealed the presence of tumefaction of the left nostril and the left half of the upper lip projecting towards the contralateral side especially in the nose. It was soft and painless, with the presence at the surface of dull red keratotic papules of 1 to 2 mm in diameter. Examination of the nasal mucosa revealed the same appearance of papules. DISCUSSION: Angiokeratoma circumscriptum is a rare congenital malformation, the rarest of five types. Since its initial description in 1890, few cases have been reported. However, female predominance has been noted with a male/female sex ratio of 1/3. It appears to be due to a genetic mutation that is probably autosomal, but the site of which is still unknown. In view of the special features of this case, several diagnoses were suggested, including Rendu Osler's disease, superficial lymphangioma and verrucous angioma. CONCLUSION: The particularity of this case is that it includes the first description of this site, which posed a therapeutic problem, especially concerning the choice of laser type to be used.

Long-term effect of gamma irradiation on the functional properties and cytocompatibility of multiblock co-polymer films.

The purpose of this work was to investigate the long-term effect of gamma-irradiation treatment on the functional properties of PEG-PDLLA and PEG-PLGA films and to evaluate the cytocompatibility of sterilized samples. Chemical and thermal properties, and cytocompatibility of sterilized films were detected for samples at time zero and after storage at 5 ± 3°C for 60 days. An in vitro degradation study was carried out on polymer samples to examine the effect of sterilization on the degradation performances of co-polymer films. Incubated samples were characterized in terms of film surface structure (SEM), chemical (GPC) and thermal (DSC) properties. The study performed on films upon gamma sterilization showed no significant changes of the PEG-PDLLA and PEG-PLGA film structure, while GPC analysis highlighted that the effect of gamma irradiation was dependent on the Mw and composition of polymers. DSC traces suggested more pronounced gamma-ray effects on the PEG-PLGA multiblock co-polymer. During the stability study important changes in terms of structure surface, thermal properties and cytocompatibility were observed and investigated. Data collected during the in vitro degradation study emphasized the need to know and investigate the degradation performances and behaviour of polymer or polymer systems (as DDS, scaffolds and bandage) treated with gamma rays.

Induction of an in vitro reversible hypometabolism through chitosan-based nanoparticles.

OBJECTIVE: Chitosan-based nanoparticles (NPs) were prepared to promote intracellular sustained delivery of the synthetic delta opioid D-Ala(2)-D-Leu(5)-enkephalin (DADLE), prolonging peptide activity and inducing a safe and reversible hypometabolic state. MATERIALS AND METHODS: NPs were prepared by combining ionotropic gelation and ultrasonication treatment. NP uptake studies and the effects of encapsulated DADLE on HeLa cells proliferation were tested by transmission electron microscopy (TEM) analysis, by immuno-fluorescence and immuno-cytochemistry. RESULTS: DADLE-loaded NPs are produced with suitable characteristics, a satisfactory process yield (55.4% ± 2.4%) and encapsulation efficiency (64.6% ± 2.1%). NPs are effective in inducing a hypometabolic stasis at a 10(-4) M DADLE concentration. Moreover, as seen from the immunofluorescence study, the effect persists through the recovery period (72 h). Indeed, NPs labelled by anti-enkephalin antibody inside cell nucleus reassert that the in vivo release of the peptide can be prolonged with respect to the case of free peptide supply. CONCLUSION: The nanoparticulate drug delivery system described seems to be effective in inducing and prolonging a sort of hibernation-like state in the cells.

gamma-irradiation of PEGd,lPLA and PEG-PLGA multiblock copolymers: II. effect of oxygen and EPR investigation.

The purpose of this research was to evaluate how the presence of oxygen can affect irradiation-induced degradation reactions of PEGd,lPLA and PEG-PLGA multiblock copolymers submitted to gamma irradiation and to investigate the radiolytic behavior of the polymers. PEGd,lPLA, PEG-PLGA, PLA, and PLGA were irradiated by using a (60)Co irradiation source in air and under vacuum at 25 kGy total dose. Mw and Mn were evaluated by gel permeation chromatography. The stability study was carried out on three samples sets: (a) polymer samples irradiated and stored in air, (b) polymer samples irradiated and stored under vacuum, and (c) polymer samples irradiated under vacuum and stored in air. The thermal and radiolytic behavior was investigated by differential scanning calorimetry and electron paramagnetic resonance (EPR), respectively. Samples irradiated in air showed remarkable Mw and Mn reduction and Tg value reduction due to radiation-induced chain scission reactions. Higher stability was observed for samples irradiated and stored under vacuum. EPR spectra showed that the presence of PEG units in multiblock copolymer chains leads to: (a) decrease of the radiolytic yield of radicals and (b) decrease of the radical trapping efficiency and faster radical decay rates. It can be concluded that the presence of oxygen during the irradiation process and the storage phase significantly increases the entity of irradiation-induced damage.

Non-viral dried powders for respiratory gene delivery prepared by cationic and chitosan loaded liposomes.

The aim of this work was to investigate lipid-based dried powders as transfection competent carriers capable of promoting the expression of therapeutic genes. The lipid-based vectors were prepared by combining different cationic lipids 1,2-dioleoyl-3-trimethylammoniumpropane chloride (DOTAP), 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 3beta(N(N',N-dimethylaminoethane) carbamoyl) cholesterol hydrochloride (DC-Chol) or by mixing of anionic lipids (1,2-dimyristoyl-sn-glycero-3-phospocholine (DMPC), 1,2-dimyristoyl-sn-glycero-3-phospho-rac-glycerol sodium salt (DMPG) and chitosan salts. Spray drying of the formulations was performed using carbohydrates as thermoprotectant excipients and some amino acids as aerosolisation enhancers. Both the lipidic vectors and the dried powders were characterized for morphology, size, zeta potential (Z-potential) and a yield of the process. Agarose gel electrophoresis was used to examine the structural integrity of dehydrated plasmid DNA (pDNA). The biological functionality of the powders was quantified using the in vitro cell transfection. Among the several lipids and lipid-polymer mixtures tested, the best-selected formulations had spherical shape, narrow size distribution (mean diameter<220 nm, P.I.<0.250), a positive zeta-potential (>25 mV) with a good yield of the process (>65%). The set-up spray drying parameters allowed to obtain good yield of the process (>50%) and spherically shaped particles with the volume-weighted mean diameter (d[4,3])<6 microm in the respirable range. The set-up conditions for the preparation of the lipid dried powders did not adversely affect the structural integrity of the encapsulated pDNA. The powders kept a good transfection efficiency as compared to the fresh colloidal formulations. Lipid-based spray dried powders allowed the development of stable and viable formulations for respiratory gene delivery. In vitro dispersibility and deposition studies are in progress to determine the aerosolisation properties of the powders.

gamma-Irradiation of PEGd,lPLA and PEG-PLGA multiblock copolymers. I. Effect of irradiation doses.

To evaluate the effects of different gamma irradiation doses on PEGd,lPLA and PEG-PLGA multiblock copolymers. The behaviour of the multiblock copolymers to irradiation was compared to that of PLA, PLGA polymers. PEGd,lPLA, PEG-PLGA, PLA and PLGA polymers were irradiated by using a (60)Co irradiation source at 5, 15, 25 and 50 kGy total dose. Characterization was performed on all samples before and after irradiation, by nuclear magnetic resonance (NMR), infrared absorption spectrophotometry (FTIR) and gel permeation chromatography (GPC). The effect of gamma irradiation on polymer stability was also evaluated. Results of NMR and FTIR suggest an increase in -OH and -COOH groups, attributed to scission reactions induced by irradiation treatment. Data of GPC analysis showed that the weight average molecular weight (Mw) of polymer samples decreased with increasing irradiation dose. The extent of Mw degradation expressed as percentage of Mw reduction was more prominent for polymers with high molecular weight as PEGd,lPLA and PLA. The dominant effect of gamma-irradiation on both polymer samples was chain scission. The multiblock copolymer PEGd,lPLA presented higher sensitivity to irradiation treatment with respect to PLA, likely due to the presence of PEG in the matrix. The effect of gamma irradiation continues over a much longer period of time after gamma irradiation has been performed. It is suggested that the material reacts with oxygen to form peroxyl free radicals, which may further undergo degradation reactions during storage after irradiation.

Site-directed PEGylation as successful approach to improve the enzyme replacement in the case of prolidase.

The first aim of this work was to perform site-directed PEGylation of the enzyme prolidase at sulphydril groups by methoxy-polyethylene glycol-maleimide (Mal-PEG, Mw 5000 Da) in order to obtain a safe conjugation product more stable than the native enzyme. Prolidase is a cytosolic aminoacyl-l-proline hydrolase whose deficiency causes the onset of rare autosomal recessive disorder called prolidase deficiency (PD). The second purpose of this work was to investigate whether biodegradable chitosan nanoparticles loaded with PEGylated prolidase could be effective in releasing active enzyme inside fibroblasts as a possible therapeutic approach for PD. The SDS-PAGE analysis and the ESI-MS spectra confirmed the presence of the PEGylated prolidase: in particular the main conjugation product (m/z=about 65,000 Da) corresponded to the enzyme with two residues of Mal-PEG. In this study it was demonstrated the lack of toxicity (MTT assay) and the prolonged activity (40.6+/-2.6% after 48h of incubation at 37 degrees C) of the PEGylated enzyme. The PEGylated prolidase loaded chitosan nanoparticles had spherical shape, narrow size distribution (271.6+/-45.5 nm), a positive zeta-potential (15.93+/-0.26 mV) with a good preparation yield (54.6+/-3.6%) and protein encapsulation efficiency (44.8+/-4.6%). The ex vivo evaluation of prolidase activity on PD fibroblasts individuated a good level of prolidase activity replaced (about 72% after only 2 days of incubation) up to 10 days with improved morphological cell features.

Polyethylenglycol-co-poly-D,L-lactide copolymer based microspheres: preparation, characterization and delivery of a model protein.

PURPOSE: To prepare and characterize polyethylenglycol-co-poly-D,L-lactide (PEG-D,L-PLA) multiblock copolymer microspheres containing ovalbumin. Microsphere batches made of Poly-D,L-lactide (PLA) homopolymers were prepared in order to evaluate how the presence of PEG segments into PEG-D,L-PLA copolymer could affect the behaviour of microspheres as carrier of protein drugs. METHODS: The PEG-D,L-PLA and PLA microspheres, loaded with the model protein ovalbumin, were prepared using double emulsion solvent evaporation method. The effect of PEG segments in the microparticles matrix, on the morphology, size distribution, encapsulation efficiency and release behaviour was studied. RESULTS: According to the results, PEG-D,L-PLA microspheres were more hydrophilic than PLA microparticles and with lower glass transition temperature. The surface of PEG-D,L-PLA microspheres was not as smooth as that of PLA microparticles, the mean diameter of PEG-D,L-PLA microparticles was bigger than that of PLA microspheres. Protein release from the microspheres was affected by the morphological structure of PEG-D,L-PLA microspheres and properties of PEG-D,L-PLA copolymer. This study suggests that PEG-D,L-PLA multiblock copolymer may be used as carrier in protein delivery systems for different purposes.

The value of SCORAD and beyond. Towards a standardized evaluation of severity?

The clinical scoring systems of atopic dermatitis were analysed and compared. Some biological parameters that can correlate with the clinical score were also reviewed. After the definition of the disease based on validated clinical criteria, the second necessity was the availability of reliable severity scores to allow clinicians to verify the course of the disease and the efficacy of treatments. After many proposals, the SCORAD (SCORing Atopic Dermatitis), that required more than three years of work, was the first one that was validated. SCORAD is freely available from an internet site and can be easily calculated using dedicated software. EASI (Eczema Area and Severity Index) score has also been validated but it has been modified twice. Simpler systems include SASSAD (Six Area, Six Sign Atopic Dermatitis) and TIS score (Three-Item Severity score). In parallel, biological parameters were investigated. Eosinophil cationic protein, circulating basophils, major basic protein, soluble E-selectin, antistaphylococcal enterotoxin B, immunoglobulin E titres and macrophage-derived chemokine, can correlate significantly with the clinical score. The clinicians will not benefit directly from laboratory techniques and will employ clinical scores.

Induction of nitric oxide synthase activity in adrenal cells.

The induction of nitric oxide synthase (NOS) II by bacterial lypopolysaccharide (LPS) was studied in a steroidogenic mouse tumor adrenal cell line (Y1). Conditioned media from LPS-stimulated peritoneal macrophages induced an increase in NOS II expression as shown by western and northern blot analysis. Accordingly, in the presence of conditioned media an increase in nitrite levels was observed. In addition, steroid production was significantly decreased. In conclusion, NOS II expression could be induced in steroidogenic cells with a concomitant inhibition of steroid production.

Effects of L-arginine in rat adrenal cells: involvement of nitric oxide synthase.

The effects of L-arginine on corticosterone production, cGMP, and nitrite levels were examined in zona fasciculata adrenal cells. L-Arginine significantly decreased both basal and ACTH-stimulated corticosterone production. This effect was still evident when steroidogenesis was induced by 8-bromo-cAMP and 22(R)-hydroxycholesterol, but not in the presence of exogenously added pregnenolone. L-Arginine increased cGMP and nitrite levels,; these effects were blocked by the nitric oxide synthase inhibitor, N(G)-nitro-L-arginine methyl-ester. Transport of L-[3H]arginine was rapid, saturable, and monophasic, with an apparent Km of 163+/-14 microM and a maximum velocity of 53+/-6 pmol/min x 10(5) cells. The basic amino acids L-lysine and L-ornithine, but not D-arginine or the nitric oxide synthase inhibitors N(G)-nitro-L-arginine methyl-ester and N(G)-nitro-L-arginine, impaired L-arginine uptake. Taken together, these results suggest that steroidogenesis in zona fasciculata adrenal cells may be negatively modulated by L-arginine-derived nitric oxide.

Purification, stabilization, and crystallization of a modular protein: Grb2.

We report here the purification and the crystallization of the modular protein Grb2. The protein was expressed as a fusion with glutathione-S-transferase and purified by affinity chromatography on glutathione agarose. It was apparent from reverse phase chromatography that the purified protein was conformationally unstable. Instability was overcome by the addition of 100 mM arginine to the buffers. Because Grb2 appeared to be extremely sensitive to oxidation, crystallization experiments were performed with a dialysis button technique involving daily addition of fresh DTT to the reservoirs. The presence of 8 to 14% glycerol was necessary to obtain monocrystals. These results are discussed in relation with the modular nature of Grb2.

[Imaging of spinal osteochondroma of neurologic nature. Apropos of 7 cases]. / Imagerie des ostéochondromes rachidiens à expression neurologique. A propos de 7 cas.

In this work, on 7 cases of spinal neurological, the authors analyse the use of imaging in the diagnosis and pretherapeutic approach, as well as for the post-operative follow-up. They insist mostly on the value of tomographic imaging methods, in particular: computed tomography, which allows the study of mineral structures, and determines the site of implant pedicle; magnetic resonance imaging important to precise the connections between tumor and spinal canal contents. They prove that other imaging methods still possess some interest, particularly standard X-ray, useful in estimating the characteristics of exostosis and identifying spinal lesions.

Markers of slow-healing peptic ulcer in the elderly. A study on 1,052 ranitidine-treated patients.

Little is known about ulcer outcome in the elderly. The aims of the present paper were to establish whether risk factors of slow-healing peptic ulcer can be demonstrated in the elderly and whether clinical differences exist between ulcer patients whose age of onset of the disease was before or after 65 years old. The short-term, open study, involving 1052 elderly patients (over 65 years) in 37 gastroenterology centers throughout Italy aimed to compare two schedules of ranitidine treatment: 150 mg twice daily versus 300 mg at bedtime. As nonsignificant differences were found between these two schedules, the sample was considered as a whole. It included 319 gastric ulcer (GU) patients, 699 duodenal ulcer (DU) patients, and 34 concomitant GU and DU cases. Ninety-three patients dropped out of the trial; 79/294 GU, 138/635 DU, and 10/30 GU+DU were found still unhealed after four weeks and 20 GU, 15 DU, and 1 GU+DU remained so after eight weeks. Statistical analysis was performed using likelihood-ratio and Pearson's chi-squared tests and Cox's models. Univariate analysis showed that the indicators of slow-healing GU were ulcer size (P = 0.002) and persisting ulcer symptoms (P = 0.0001); indicators of slow-healing DU were ulcer size (P = 0.0001), persisting ulcer symptoms (P = 0.0001), alcohol (P = 0.0003), and NSAID (P = 0.0088) consumption. DU patients taking antiplatelet drugs have significantly better results after four weeks and worse results after eight weeks (P = 0.0352).(ABSTRACT TRUNCATED AT 250 WORDS)

[Bipolar disorder: clinical trials with fluoxetine]. / Disturbo bipolare: esperienze cliniche con fluoxetina.

Sixty patients (39 females and 21 males) aged between 20 and 65 (average 48.5) with bipolar disorder in the depressive phase, according to the DSM III-R diagnostic criteria, were treated with fluoxetine (20-60 mg/die) for 8 weeks. Evaluation of therapeutical efficacy was performed at 0 time and after 14, 28, 42, and 56 days, using the following psychometric tests; HAM-D, SCL-90, CGI. At the end of treatment 42 patients (70%) showed a reduction of the HAM-D score over 50%. Clinical results suggest that fluoxetine is affective in bipolar disorder. Tolerability was judged good and very good in 76% of patients. Side effects were very mild and in any case of rapid regression.