Accuracy of Leg Length and Hip Offset Measurements Using a Fluoroscopic Grid During Anterior Approach Total Hip Arthroplasty.

Background: Minimizing leg length (LLD) and hip offset (OD) discrepancies is critical for tissue tension and implant longevity in total hip arthroplasty (THA). The direct anterior approach (DAA) helps surgeons recreate these values under fluoroscopy. Several methods to accomplish this have been described, with no consensus on which is superior. This study evaluated the ability to minimize LLD and OD using a surgeon-controlled, adjustable fluoroscopic grid. We hypothesized that this tool would recreate parameters to within 10 mm of the contralateral side. Methods: One hundred eleven primary THAs performed with an adjustable radiopaque grid to equalize leg length and hip offset were retrospectively reviewed. These values were measured on postoperative radiographs and compared to the contralateral hip. Patients were excluded if they had inadequate imaging, revision arthroplasty, preexisting deformities, or underwent approaches other than DAA. Results: Mean age was 59.1 ± 11.1 years, 63.1% of patients were female, and average body mass index was 27.8 ± 7.0. Mean LLD was 3.7 ± 3.0 mm, while mean OD was 4.6 ± 3.6 mm. 95.5% of hips showed LLD < 10 mm, while 93.7% of hips had OD < 10 mm. Furthermore, 76.6% of hips had LLD < 5 mm, while 62.2% of hips had OD < 5 mm. Conclusions: The described technique restored limb length and hip offset during DAA THA. This technique yields consistent results and offers an inexpensive alternative to costly digital software and more cumbersome fixed grid systems.

Early Survivorship of Uncemented Total Knee Arthroplasty Varies by Age and Sex Based on Data From the Michigan Arthroplasty Registry Collaborative Quality Initiative.

BACKGROUND: Outcome data for newer uncemented total knee arthroplasty (TKA) designs has been mixed. Registry studies showed worse survivorship, but clinical trials have not demonstrated differences compared to cemented designs. There has been renewed interest in uncemented TKA with modern designs and improved technology. The utilizations of uncemented knees in Michigan, 2-year outcomes, and the effects of age and sex were evaluated. METHODS: A statewide database from 2017 through 2019 was analyzed for incidence, distribution, and early survivorship of cemented versus uncemented TKAs. There was 2-year minimum follow-up. Kaplan-Meier survival analysis was used to generate time to first revision cumulative percent revision curves. The impacts of age and sex were examined. RESULTS: Use of uncemented TKAs increased from 7.0 to 11.3%. Uncemented TKAs were more commonly men, younger, heavier, American Society of Anesthesiologists score > 2, and opioid users (P < .05). At 2 years, overall cumulative percent revision was higher in uncemented (2.44% [2.00, 2.99]) versus cemented (1.76% [1.64, 1.89]), particularly in women uncemented (2.41 [1.87, 3.12]) versus cemented (1.64 [1.50, 1.80]). Revision rates were greater with uncemented women >70 years (1.2% 1 year, 1.02% 2 years) versus < 70 years (0.56%, 0.53%), notably uncemented were inferior in both groups (P < .05). Men, regardless of age, had similar survivorships with both cemented and uncemented designs. CONCLUSION: The use of an uncemented TKA had an increased risk of early revision compared to cemented. This finding, however, was only apparent in women, especially those >70 years old. Surgeons should consider cement fixation in women >70 years.

Acellular dermal matrix augmentation significantly increases ultimate load to failure of pectoralis major tendon repair: a biomechanical study.

BACKGROUND: Biomechanical studies have demonstrated that standard pectoralis major tendon (PMT) repairs have inferior strength compared with native tendon. HYPOTHESIS: Augmentation of PMT repair with an acellular dermal matrix (ADM) will increase the ultimate load to failure. METHODS: Eighteen cadaveric specimens were allocated to 3 repair groups: standard repair (SR); augmented repair (AR) with ADM; and intact, native tendon (NT). Specimens were tested for cyclic elongation, linear stiffness, load to 5 mm displacement, maximum load to failure, and method of failure. RESULTS: Maximum load to failure in AR (1450 ± 295 N) was significantly higher than SR (921 ± 159 N; P = .0042) and equivalent to NT (1289 ± 240 N; P = .49). NT required the highest load to displace 5 mm (709 ± 202 N), which was higher than AR (346 ± 95 N; P < .001) and SR (375 ± 55; P = .0015). NT stiffness (125 ± 42 N/mm) was greater than the AR (69 ± 19 N/mm; P = .0073) or SR (75 ± 11 N/mm; P = .015). The mode of failure for SR was suture pullout from the PMT as opposed to button pullout from the humerus (fracture) for AR. CONCLUSION: ADM augmentation of PMT repair significantly increases ultimate load to failure.

Slope-reducing tibial osteotomy decreases ACL-graft forces and anterior tibial translation under axial load.

PURPOSE: Posterior tibial slope (PTS) represents an important risk factor for anterior cruciate ligament (ACL) graft failure, as seen in clinical studies. An anterior closing wedge osteotomy for slope reduction was performed to investigate the effect on ACL-graft forces and femoro-tibial kinematics in an ACL-deficient and ACL-reconstructed knee in a biomechanical setup. METHODS: Ten cadaveric knees with a relatively high native slope (mean ± SD): (slope 10° ± 1.4°, age 48.2 years ± 5.8) were selected based on prior CT measurements. A 10° anterior closing-wedge osteotomy was fixed with an external fixator in the ACL-deficient and ACL-reconstructed knee (quadruple Semi-T/Gracilis-allograft). Each condition was randomly tested with both the native tibial slope and the post-osteotomy reduced slope. Axial loads (200 N, 400 N), anterior tibial draw (134 N), and combined loads were applied to the tibia while mounted on a free moving and rotating X-Y table. Throughout testing, 3D motion tracking captured anterior tibial translation (ATT) and internal tibial rotation (ITR). Change of forces on the reconstructed ACL-graft (via an attached load-cell) were recorded, as well. RESULTS: ATT was significantly decreased after slope reduction in the ACL-deficient knee by 4.3 mm ± 3.6 (p < 0.001) at 200 N and 6.2 mm ± 4.3 (p < 0.001) at 400N of axial load. An increase of ITR of 2.3° ±2.8 (p < 0.001) at 200 N and by 4.0° ±4.1 (p < 0.001) at 400 N was observed after the osteotomy. In the ACL-reconstructed knee, ACL-graft forces decreased after slope reduction osteotomy by a mean of 14.7 N ± 9.8 (p < 0.001) at 200 N and 33.8 N ± 16.3 (p < 0.001) at 400N axial load, which equaled a relative decrease by a mean of 17.0% (SD ± 9.8%), and 33.1% (SD ± 18.1%), respectively. ATT and ITR were not significantly changed in the ACL-reconstructed knee. Testing of a tibial anterior drawing force in the ACL-deficient knee led to a significantly increased ATT by 2.7 mm ± 3.6 (p < 0.001) after the osteotomy. The ACL-reconstructed knee did not show a significant change (n.s.) in ATT after the osteotomy. However, ACL-graft forces detected a significant increase by 13.0 N ± 8.3 (p < 0.001) after the osteotomy with a tibial anterior drawer force, whereas the additional axial loading reduced this difference due to the osteotomy (5.3 N ± 12.6 (n.s.)). CONCLUSIONS: Slope-reducing osteotomy decreased anterior tibial translation in the ACL-deficient and ACL-reconstructed knee under axial load, while internal rotation of the tibia increased in the ACL-deficient status after osteotomy. Especially in ACL revision surgery, the osteotomy protects the reconstructed ACL with significantly lower forces on the graft under axial load.