Sustainable Recovery of Platinum Group Metals from Spent Automotive Three-Way Catalysts through a Biogenic Thiosulfate-Copper-Ammonia System.

This study explores an eco-friendly method for recovering platinum group metals from a synthetic automotive three-way catalyst (TWC). Bioleaching of palladium (Pd) using the thiosulfate-copper-ammonia leaching processes, with biogenic thiosulfate sourced from a bioreactor used for biogas biodesulfurization, is proposed as a sustainable alternative to conventional methods. Biogenic thiosulfate production was optimized in a gas-lift bioreactor by studying the pH (8-10) and operation modes (batch and continuous) under anoxic and microaerobic conditions for 35 d. The maximum concentration of 4.9 g S2O32- L-1 of biogenic thiosulfate was reached under optimal conditions (batch mode, pH = 10, and airflow rate 0.033 vvm). To optimize Pd bioleaching from a ground TWC, screening through a Plackett-Burman design determined that oxygen and temperature significantly affected the leaching yield negatively and positively, respectively. Based on these results, an optimization through an experimental design was performed, indicating the optimal conditions to be Na2S2O3 1.2 M, CuSO4 0.03 M, (NH4)2SO4 1.5 M, Na2SO3 0.2 M, pH 8, and 60 °C. A remarkable 96.2 and 93.2% of the total Pd was successfully extracted from the solid at 5% pulp density using both commercially available and biogenic thiosulfate, highlighting the method's versatility for Pd bioleaching from both thiosulfate sources.

Bioleaching of the α-alumina layer of spent three-way catalysts as a pretreatment for the recovery of platinum group metals.

Acid bioleaching of Al by Acidithiobacillus thiooxidans has been explored as an environmentally friendly pretreatment to facilitate the extraction of platinum group metals from spent three-way catalysts (TWC). Biogenic sulfur obtained from desulfurization bioreactors improved the production of acid by A. thiooxidans compared to commercially available elemental sulfur. The lixiviation abilities of bacteria-free biogenic acid and biogenic acid with exponential or stationary phase bacteria were compared against a control batch produced by commercial H2SO4. The maximum Al leaching percentage (54.5%) was achieved using biogenic acids with stationary-phase bacteria at a TWC pulp density of 5% w/v whereas bacteria-free biogenic acid (23.4%), biogenic acid with exponential phase bacteria (21.7%) and commercial H2SO4 (24.7%) showed lower leaching abilities. The effect of different pulp densities of ground TWC (5, 30, and 60% w/v) on Al leaching and bacterial growth was determined. While greater Al leaching yields were obtained at lower TWC pulp density solutions (54.5% at 5% w/v and 2.5% at 60% w/v), higher pulp densities enhanced microbial growth (2.3 × 109 cells/mL at 5% w/v and 9.5 × 1010 cells/mL at 60% w/v). The dissolution of the metal from the solid into the liquid phase triggered the production of biological polymeric substances that were able to absorb traces of both Al (up to 24.80% at 5% w/v) and Pt (up to 0.40% at 60% w/v).

A preliminary study on a novel bioaugmentation technique enhancing lactic acid production by mixed cultures fermentation.

The paper is a preliminary study on the selection of lactic acid producing microorganisms from a mixed microbial population via bioaugmentation. The bioaugmentation technique is based on pH sudden variations occurring in sequential batch steps of a dark fermentation process applied to simple substrates. Different conditions are tested and compared. The structure of microbial communities and concentrations of metabolic intermediates are analyzed to study the possible substrate conversion routes. Obtained results indicate that the initial mixed culture produced a lactic acid percentage of 5% in terms of CODLA/CODPRODUCTS. In the most favourable conditions, the selected culture produced a lactic acid percentage of 59%. The analysis of the composition of microbial communities before and after the bioaugmentation processes, indicates that lactic acid production mainly results from the population change to bacteria belonging to the genus Bacillus. Indeed, the relative abundance of Bacilli increased from 0.67%, to 8.40% during the bioaugmentation cycle.