Optical sensing of aqueous nitrate anion by a platinum(II) triimine salt based solid state material.

Selective and quantitative measurement of aqueous nitrate (NO3-) anion is achieved using solid [Pt(Cl-4-tpy)Cl]ClO4 salt (Cl-4-tpy = 4-chloro-2,2':6'2''-terpyridine), and as the salt supported on controlled porous glass. This detection method relies on the color change of the Pt(II) complex from yellow to red and intense luminescence response upon ClO4- exchange with NO3- due to concomitant enhancement of Pt⋯Pt interactions. The spectroscopic response is highly selective for NO3- over a large range of halides and oxoanions.

Water's Role in Polymorphic Platinum(II) Complexes.

Solvent plays a vital role in the recrystallization process and resulting crystallinity of materials. This role is of such importance that it can control the stability and utility of materials. In this work, the inclusion of a solvent in the crystalline lattice, specifically water, drastically affects the overall stability of two platinum polymorphs. [Pt(tpy)Cl]BF4 (tpy = 2,2';6'2″-terpyridine) crystallizes in three forms, red (1R) and blue (1B) polymorphs and a yellow nonsolvated form (2). 1R is the more stable of the two polymorphs, whereas 1B loses crystallinity upon dehydration at ambient conditions resulting in the formation of 2. Close examination of the solid-state extended structures of the two polymorphs reveals that 1R has a lattice arrangement that is more conducive to stronger intermolecular interactions compared to 1B, thereby promoting greater stability. In addition, these two polymorphs exhibit unique vapochromic responses when exposed to various solvents.

pH-Mediated Colorimetric and Luminescent Sensing of Aqueous Nitrate Anions by a Platinum(II) Luminophore@Mesoporous Silica Composite.

Increased levels of nitrate (NO3-) in the environment can be detrimental to human health. Herein, we report a robust, cost-effective, and scalable, hybrid material-based colorimetric/luminescent sensor technology for rapid, selective, sensitive, and interference-free in situ NO3- detection. These hybrid materials are based on a square-planar platinum(II) salt [Pt(tpy)Cl]PF6 (tpy = 2,2';6',2″-terpyridine) supported on mesoporous silica. The platinum salt undergoes a vivid change in color and luminescence upon exposure to aqueous NO3- anions at pH ≤ 0 caused by substitution of the PF6- anions by aqueous NO3-. This change in photophysics of the platinum salt is induced by a rearrangement of its crystal lattice that leads to an extended Pt···Pt···Pt interaction, along with a concomitant change in its electronic structure. Furthermore, incorporating the material into mesoporous silica enhances the surface area and increases the detection sensitivity. A NO3- detection limit of 0.05 mM (3.1 ppm) is achieved, which is sufficiently lower than the ambient water quality limit of 0.16 mM (10 ppm) set by the United States Environmental Protection Agency. The colorimetric/luminescence of the hybrid material is highly selective to aqueous NO3- anions in the presence of other interfering anions, suggesting that this material is a promising candidate for the rapid NO3- detection and quantification in practical samples without separation, concentration, or other pretreatment steps.

Phase transformation induced mechanochromism in a platinum salt: a tale of two polymorphs.

Red crystals of [Pt(tpy)Cl]NO3·HNO3 show mechanochromic behaviour turning yellow when pressure is applied. The electronic character and spectroscopic signature of the red and yellow polymorphs change as a result of slipping of the molecular stacking planes in the solid state. The slippage alters the PtPt intermolecular distances from a linear stacked motif with <3.5 Å separations in the red polymorph to a less stacked motif of alternating short intradimer and long interdimer interactions in the yellow polymorph.

Solution aggregation of platinum(ii) triimine methyl complexes.

The NMR chemical shifts of [Pt(tpy)(CH3)](PF6) (1) and [Pt(mbzimpy)(CH3)](PF6) (2), where tpy = 2,2';6'2''-terpyridine and mbzimpy = 2,6-bis(N-methylbenzimidazol-2-yl)pyridine, in room-temperature DMSO-d6 displayed concentration dependence as a result of formation of dimers. Quantification of these dimers, expressed by equilibrium constant (K), shows a greater tendency of 2 to aggregate in solution. Structural conformations of these dimers were confirmed by 2D 1H-1H NOESY; the results explicitly suggest a head-to-tail stacking arrangement of molecules in dimers.

Luminescent Pt(2,6-bis(N-methylbenzimidazol-2-yl)pyridine)X+: a comparison with the spectroscopic and electrochemical properties of Pt(tpy)X+ (X = Cl, CCPh, Ph, or CH3).

A series of platinum(ii) pincer complexes of the formula Pt(mbzimpy)X+, 1(a-d), (mbzimpy = 2,6-bis(N-methylbenzimidazol-2-yl)pyridine; X = Cl; (a), CCPh; (b), Ph; (c), or CH3; (d), CCPh = phenylacetylide, and Ph = Phenyl) have been synthesized and characterized. Electronic absorption and emission, as well as electrochemical properties of these compounds, have been investigated. Pt(tpy)X+ analogs (tpy = 2,2';6'2''-terpyridine), 2(a-d), have also been investigated and compared. Electrochemistry shows that 1 and 2 analogs undergo two chemically reversible one-electron reduction processes that are shifted cathodically along the a < b < c < d series. Notably, these reductions occur at slightly higher negative potentials in the case of 1. The absorption spectra of 1 and 2 in acetonitrile exhibit ligand-centered (1LC) transitions (ε ≈ 104 M-1 cm-1) in the UV region and metal-to-ligand-charge transfer (1MLCT) transitions (ε ≈ 103 M-1 cm-1) in the visible region. The corresponding visible bands of 1b and 2b have been assigned to 1(LLCT/MLCT) mixed state (LLCT: ligand-to-ligand-charge transfer). The preceding 1LC and 1MLCT transitions of 1 occur at lower energies than that of 2. These 1LC transitions have distinctly been blue-shifted along a < c < d in 2, but occur at nearly identical energies in 1. Conversely, 1MLCT transitions are red-shifted along a < c < d in both the analogs. The 77 K glassy solutions of 1 and 2 exhibit an intense vibronically-structured emission band at λmax(0-0) in the 470-560 nm range. This band is red-shifted along b < a ≤ c < d in 1 and along a ≤ d ≈ c ≪ b in 2. The main character of these emissions is assigned to 3LLCT emissive state in 1b and 2b, whereas to 3LC in the rest of the compounds. Relative stabilization of these spin-forbidden emissive states is discussed by invoking configuration mixing with the higher-lying 3MLCT state.

A digital imaging method for evaluating the kinetics of vapochromic response.

This work describes the novel use of a cell phone camera and the L*a*b method (color space defined by the International Commission on Illumination) to characterize the color change in different vapochromic platinum(II) complexes in order to get quantitative and more reliable data. In this study, we have developed a semi-automatic CCA software that digitally analyzes images (e.g., video frames) collected while a vapochromic material is absorbing vapor and changing its color. The advantages of using this method, compared to reflectance or transmission spectroscopy through a thin film, include its low cost, convenience, portability, ease of sample preparation, the lack of need for specialized equipment, and the possibility of simultaneously collecting data on different samples under identical conditions. The results show that this strategy is effective in producing quantitative information about the kinetics of processes.

Spectroscopic Characterization of Platinum(IV) Terpyridyl Complexes.

Pt(tpy)X3+ [X = Cl (1), Br (2); tpy = 2,2':6',2″-terpyridine] salts were prepared by the oxidative addition of Pt(tpy)X+ with X2 as originally reported by Morgan and Burstall in 1934. The complexes have been fully characterized by 1H NMR spectroscopy, elemental analysis, mass spectrometry, and X-ray crystallography. The electronic structures of 1 and 2 were investigated using absorption and emission spectroscopy, and the accumulated data are consistent with stabilization of the singlet ligand-centered and potentially singlet ligand field/singlet ligand-to-metal charge-transfer states for 1 and 2 compared to those for Pt(tpy)Cl+ (3) and Pt(tpy)Br+ (4). The changes in the lowest-energy-absorbing state result in drastic differences in the emission behavior among 1-4. Specifically, 1 emits from a lowest-energy state that appears to have triplet ligand field/triplet ligand-to-metal charge-transfer character, whereas 2 exhibits no appreciable emission between 400 and 800 nm.

Synthesis, Luminescence, and Structure of a Polymorphic Polyfluorinated Diiodoplatinum(II) Diimine Complex.

PtI2(5,5'-bis(HCF2CH2OCH2)-2,2'-bpy)], 55-2FH-PtI2, is the first example of a substituted fluorinated diiodoplatinum diimine complex that exhibits polymorphism. The complex, upon recrystallization, forms two different polymorphs, denoted as α and ß forms. The luminescence of the α and ß forms are the same in glassy solution at 77 K; however, in the solid state, they differ significantly. The major difference between them lies in the solid-state packing of the crystalline structure. The α form is a square planar polyfluorinated PtI2-containing complex. Its extended herringbone structure consists of two neighboring stacked bipyridyl planes that do not overlap. The α form emits stronger than its parent molecule, [PtI2bpy], and much stronger than the ß polymorph. The ß form has a slight tetrahedral distortion about the metal center that ultimately changes the geometry of the complex and decreases the d-orbital splitting from square planar. Furthermore, overlapping bipyridine rings in the extended structure of the ß form quench the emission thus resulting in a lower energy emission. Additionally, the ß form shows only one type of C-H···O intermolecular stacking interaction that can cause the moderate distortion of the metal core.

Tuning two-electron transfer in terpyridine-based platinum(ii) pincer complexes.

An important factor in obtaining reversible multi-electron transfer is overcoming large changes in coordination geometry. One strategy is to use ligands that can support the geometries favored before and after the electron transfer. Pip2NCN- pincer and terpyridine ligands are used to support square planar Pt(ii) and octahedral Pt(iv). For the Pt(ii) complexes, [Pt(Z-pip2NCN)(R-tpy)]+ (Z = NO2, MeO, H; R = H, tertyl butyl, tolyl), 1H NMR spectroscopy shows that the Z-pip2NCN- ligand is monodentate whereas the R-terpyridyl ligand is tridentate. The availability of flanking piperidyl groups of the monodentate pincer ligand is essential for the stabilization of the metal center upon oxidation. Pt(Z-pip2NCN)(R-tpy)+ complexes undergo two-electron platinum centered oxidation near 0.4 V and two Pt(tpy) centered reductions near -1.0 V and -1.5 V. An estimate of n ox/n red = 1.8 is consistent with an oxidation that involves two-electron transfer per Pt center. Variation in the pincer-(Z) and terpyridine-(R) substituents allows for tuning of the oxidation process over a 260 mV range and the two reduction processes over ranges of 230 mV (first reduction) and 290 mV (second reduction step).

Halide exchange studies of novel Pd(ii) NNN-pincer complexes.

Palladium(ii) complexes with an NNN type pincer ligand (pip2NNN = 2,6-bis(piperdyl-methyl)pyridine) are synthesized and characterized. Electronic and 1H NMR spectra point to decreasing filled/filled repulsions between the dπ(Pd) orbitals and the halide lone pair orbitals along the Cl < Br < I series. For all complexes, the most downfield α-piperidyl resonance of the pip2NNN ligand is sensitive to changes in the coordinated halide while the meta-pyridyl and benzylic resonances are sensitive to changes in the counter anion. This sensitivity is utilized to study halide association and exchange at the fourth coordination site. Conductivity and 1H NMR spectroscopy confirm the interaction between the exogenous anion (Cl-, Br-, BF4 -) and Pd(pip2NNN)X+ (X = Cl, Br).

Radio-Fluorogenic Gel Dosimetry with Coumarin.

Gel dosimeters are attractive detectors for radiation therapy, with properties similar to biological tissue and the potential to visualize volumetric dose distributions. Radio-fluorogenesis is the yield of fluorescent chemical products in response to energy deposition from ionizing radiation. This report shares the development of a novel radio-fluorogenic gel (RFG) dosimeter, gelatin infused with coumarin-3-carboxlyic acid (C3CA), for the quantification of imparted energy. Aqueous solutions exposed to ionizing radiation result in the production of hydroxyl free radicals through water radiolysis. Interactions between hydroxyl free radicals and coumarin-3-carboxylic acid produce a fluorescent product. 7-hydroxy-coumarin-3-carboxylic acid has a blue (445 nm) emission following ultra-violet (UV) to near UV (365⁻405 nm) excitation. Effects of C3CA concentration and pH buffers were investigated. The response of the RFG was explored with respect to strength, type, and exposure rate of high-energy radiation. Results show a linear dose response relationship independent of energy and type, with a dose-rate dependency. This report demonstrates increased photo-yield with high pH and the utility of gelatin-RFG for phantom studies of radiation dosimetry.

Assessing flammable storage cabinets as sources of VOC exposure in laboratories using real-time direct reading wireless detectors.

Herein we present the results of measurements using wireless direct-reading photoionization detector-based gas sensors to quantify concentrations of vapors of volatile organic compounds (VOCs) in and around flammable storage cabinets containing common organic solvents, including acetone, dichloromethane, trichloroethylene, and benzene. Such cabinets are commonly employed in laboratories to contain flammable liquids. A sensor array was deployed in a series of flammable storage cabinets in working laboratories. Measurements in cabinets containing bottles of typical solvents demonstrate that vapor concentrations gradually increase upon closing the cabinet door. The results suggest that these storage units can be a source of vapors of VOCs in laboratories and the unnecessary exposure of laboratory workers to chemical vapors. Ventilation of cabinets tended to lower maximum concentrations of VOCs. However, the efficacy of this engineering control was found to depend on the quality of the cabinet door seal, as well as having debris-free flame arrestors. Opening cabinet doors resulted in release of vapors to the laboratory atmosphere, which represents an unnecessary exposure risk for workers. A countermeasure aimed at improving the seal of previously opened solvent bottles reduced measured concentrations of VOCs in cabinets below the detector's limit of detection.

Analyte-responsive gated hollow mesoporous silica nanoparticles exhibiting inverse functionality and an AND logic response.

A multifunctional nanoparticle with designed selectivity was made using hollow mesoporous silica, ship-in-a-bottle synthesis of a crystalline solid-state detector, and protection of the crystal by acid-responsive nanogates. The system demonstrates the inverse application of the usual trapping of contents by the gate followed by their release. Instead, the gate protects the contents followed by selective exposure. Crystallization of [Pt(tpy)Cl](PF6) (tpy = 2,2':6',2''-terpyridine) inside the cavity of hollow mesoporous silica created the unique core/shell nanoparticle. The crystalline core becomes fluorescent in the presence of perchlorate. By condensing an acid-sensitive gate onto the particle, access to the pores is blocked and the crystal is protected. The new nanomaterial obeys Boolean AND logic; only the presence of both the analyte (ClO4-) and acid results in the optical response.

Highly Selective Colorimetric and Luminescence Response of a Square-Planar Platinum(II) Terpyridyl Complex to Aqueous TcO4(-).

Molecular recognition of an aqueous pertechnetate (TcO4(-)) anion is fundamentally challenging partly due to the charge-diffuse nature of this anion, which hampers design of new technologies for its separation and detection. To address this gap, simple salts of transition metal complexes that undergo a distinct spectroscopic change upon exposure to aqueous anions were explored. The Pt(II) complex [Pt(tpy)Br]SbF6 (tpy = 2,2';6',2″-terpyridine) undergoes a dramatic color change and intense luminescence response upon TcO4(-) uptake due to concomitant enhancement of Pt···Pt interactions. The spectroscopic response was highly selective and quantitative for aqueous TcO4(-) among other competing anions. Complementary Raman spectroscopy and microscopy techniques, structural determination, and theoretical methods were employed to elucidate the mechanism of this response at the molecular level.

Platinum(II) Monomer and Dimer Complexes with a Bis(oxazolinyl)phenyl Pincer Ligand.

A series of platinum(II) complexes with the formulas Pt(phebox)(L)(+) (phebox(-) = 1,3-bis(4,4'-dimethyl-2'-oxazolinyl)phenyl anion; L = pyridine (py), 4-phenylpyridine, quinoline, acridine) and Pt2(phebox)2(µ-L')(2+) (L' = pyrazine, 4,4'-bipyridine, 1,2-bis(4-pyridyl)ethane) was prepared. Crystallographic data establish that the metal center is bonded to the tridentate phebox(-) and monodentate pyridyl ligands. The five-membered oxazoline rings favor a CH2-CMe2 twist conformation. Pt(phebox)Cl and Pt(phebox)(py)(+) undergo a ligand-based chemically reversible redox reaction, whereas the electrochemistry of the other complexes is chemically and electrochemically less reversible. In contrast to complexes with the 1,3-bis(piperdylmethyl)phenyl anion ligand (pip2NCN(-)) or related pincer ligands, each of the phebox(-) complexes described here exhibits intense emission in room-temperature methylene chloride solution, which is assigned as originating from a lowest, predominantly phebox(-) ligand-centered excited state. In acetonitrile, the complexes undergo solvolysis resulting in displacement of the pyridyl ligands. The accumulated data demonstrate that subtle variations in the nature of the NCN and ancillary ligands of platinum(II) complexes provide access to at least five orbitally distinct emissive excited states.

In-house and synchrotron X-ray diffraction studies of 2-phenyl-1,10-phenanthroline, protonated salts, complexes with gold(III) and copper(II), and an orthometallation product with palladium(II).

Different salts of the 2-phenyl-1,10-phenanthrolin-1-ium cation, (pnpH)(+), are obtained by reacting 2-phenyl-1,10-phenanthroline (pnp), C18H12N2, (I), with a variety of anions, such as hexafluoridophosphate, C18H13N2(+)·PF6(-), (II), trifluoromethanesulfonate, C18H13N2(+)·CF3SO3(-), (III), tetrachloridoaurate, (C18H13N2)[AuCl4], (IV), and bromide (as the dihydrate), C18H13N2(+)·Br(-)·2H2O, (V). Compound (I) crystallizes with Z' = 2, with both independent molecules adopting a coplanar conformation. In (II)-(IV), a hydrogen bond exists between the cation and anion, while one of the lattice water molecules serves as a hydrogen-bonded bridge between the cation and anion in (V). Reaction of (I) with HAuCl4 gives the salt complex (IV); however, reaction with KAuCl4 produces the monodentate complex trichlorido(2-phenyl-1,10-phenanthroline-κN(10))gold(III), [AuCl3(C18H12N2)], (VI). Dichlorido(2-phenyl-1,10-phenanthroline-κ(2)N,N')copper(II), [CuCl2(C18H12N2)], (VII), results from the reaction of CuCl2·2H2O and (I), in which the Cu(II) center adopts a tetrahedrally distorted square-planar geometry. The pendent phenyl ring twists to a bisecting position relative to the phenanthroline plane. The square-planar Pd(II) complex, bromido[2-(phenanthrolin-2-yl)phenyl-κ(3)C(1),N,N']palladium(II), [PdBr(C18H11N2)], (VIII), is obtained from the reaction of (I) with [PdCl2(cycloocta-1,5-diene)], followed by addition of bromine. A coplanar geometry for the pendent ring is adopted as a result of the tridentate bonding motif.

Ruthenium bis-diimine complexes with a chelating thioether ligand: delineating 1,10-phenanthrolinyl and 2,2'-bipyridyl ligand substituent effects.

Despite the high π-acidity of thioether donors, ruthenium(II) complexes with a bidentate 1,2-bis(phenylthio)ethane (dpte) ligand and two chelating diimine ligands (i.e., Ru(diimine)2(dpte)(2+)) exhibit room-temperature fluid solution emission originating from a lowest MLCT excited state (diimine = 2,2'-bipyridine, 5,5'-dimethyl-2,2'-bipyridine 4,4'-di-tert-butyl-2,2'-bipyridine, 1,10-phenanthroline, 5-methyl-1,10-phenanthroline, 5-chloro-1,10-phenanthroline, 5-bromo-1,10-phenanthroline, 5-nitro-1,10-phenanthroline, 4,7-diphenyl-1,10-phenanthroline, and 3,4,7,8-tetramethyl-1,10-phenanthroline). Crystal structures show that the complexes form 2 of the 12 possible conformational/configurational isomers, as well as nonstatistical distributions of geometric isomers; there also are short intramolecular π-π interactions between the diimine ligands and dpte phenyl groups. The photoinduced solvolysis product, [Ru(diimine)2(CH3CN)2](PF6)2, for one complex in acetonitrile also was characterized by single-crystal X-ray diffraction. Variations in the MLCT energies and Ru(III/II) redox couple, E°'(Ru(3+/2+)), can be understood in terms of the influence of the donor properties of the ligands on the mainly metal-based HOMO and mainly diimine ligand-based LUMO. E°'(Ru(3+/2+)) also is quantitatively described using a summative Hammett parameter (σT), as well as using Lever's electrochemical parameters (EL). Recommended parametrizations for substituted 2,2'-bipyridyl and 1,10-phenanthrolinyl ligands were derived from analysis of correlations of E°'(Ru(3+/2+)) for 99 homo- and heteroleptic ruthenium(II) tris-diimine complexes. This analysis reveals that variations in E°'(Ru(3+/2+)) due to substituents at the 4- and 4'-positions of bipyridyl ligands and 4- and 7-positions of phenanthrolinyl ligands are significantly more strongly correlated with σp(+) than either σm or σp. Substituents at the 5- and 6-positions of phenanthrolinyl ligands are best described by σm and have effects comparable to those of substituents at the 3- and 8-positions. Correlations of EL with σT for 1,10-phenanthrolinyl and 2,2'-bipyridyl ligands show similar results, except that σp and σp(+) are almost equally effective in describing the influence of substituents at the 4- and 4'-positions of bipyridyl ligands. MLCT energies and d(5)/d(6)-electron redox couples of the complexes with 5-substituted 1,10-phenanthroline exhibit correlations with values for other d(6)-electron metal complexes that can be rationalized in terms of the relative number of diimine ligands and substituents.

Between red and yellow: evidence of intermediates in a vapochromic Pt(II) salt.

[Pt(tpy)Cl]ClO4·H2O (1·H2O) changes from red to yellow upon dehydration due to increased Pt···Pt distances. Spectroscopic, diffraction, gravimetric and calorimetric data demonstrate the presence of intermediates during hydration and dehydration which signifies surprising mechanistic complexity in the vapochromic response.

X-ray and synchrotron diffraction studies of 2-(pyridin-2-yl)-1,10-phenanthroline in the role of ligand for two copper polymorphs or hydrogen bonded with 2,2,6,6-tetramethyl-4-oxopiperidinium hexafluorophosphate.

Different extended packing motifs of dichlorido[2-(pyridin-2-yl)-1,10-phenanthroline]copper(II), [CuCl2(C17H11N3)], are obtained, depending on the crystallization conditions. A triclinic form, (I), is obtained from dimethylformamide-diethyl ether or methanol, whereas crystallization from dimethylformamide-water yields a monoclinic form, (II). In each case, the Cu(II) centre is in a five-coordinate distorted square-pyramidal geometry. The extended packing for both forms can be described as a highly offset π-stacking arrangement, with interlayer distances of 3.674 (3) and 3.679 (3) Šfor forms (I) and (II), respectively. The reaction of diprotonated Pt(tmpip2NCN)Cl [tmpip2NCN = 2,6-bis(2,2,6,6-tetramethylpiperidylmethyl)benzyl] with AgPF6 under acidic conditions, followed by the addition of 2-(pyridin-2-yl)-1,10-phenanthroline, results in a hydrogen-bonded cocrystal, 2,2,6,6-tetramethyl-4-oxopiperidinium hexafluorophosphate-2-(pyridin-2-yl)-1,10-phenanthroline (1/1), C9H18NO(+)·PF6(-)·C17H11N3, (III). The extended packing maximizes π-π interactions in a parallel face-to-face arrangement, with an interlayer stacking distance of 3.4960 (14) Å.