Laser treatment for adverse reactions to injectable facial filling: a systematic review.

Facial filling is widespread in society, albeit associated with inherent risks. This review analyzes clinical studies using laser therapy for filler complications to assess its safety and efficacy as an alternative treatment. A literature search was conducted up until April 2023, encompassing five different databases: PubMed, Scopus, Embase, Web of Science, and Medline, to find clinical trials addressing patients who underwent laser treatment for adverse reactions to injectable facial filling. The outcome variables were the clinical assessment of the lesion and the occurrence of post-intervention complications/sequelae. The risk of bias was assessed using the ROBINS-I tool. In total, six studies were included, all classified as having a "moderate risk" of bias. A total of 533 patients underwent laser treatment for adverse reactions to injectable facial fillers. The diode laser was the most frequently utilized equipment, with positive results reported in five studies. Among all treated patients, 96.24% achieved partial or complete resolution, 0.22% experienced some sequelae or complications, and only 0.01% showed no improvement. Laser treatment can eliminate the necessity for surgical intervention for adverse reactions to injectable facial fillers, resulting in partial or complete improvement of the condition.

Clinical performance of sealants under different humidity control conditions: a split-mouth 1-year randomized trial.

PURPOSE: Sealants are an effective method of prevention and treatment for early caries lesions. This study analyzed the 1-year clinical performance of resin-based and ionomeric sealants applied to permanent teeth under different humidity conditions. METHODS: The investigation was a triple-blind randomized clinical trial (RCT) with a four arms split-mouth design, divided according to the sealant protocol: (1) Resin-based sealant applied with rubber dam isolation, (2) Resin-based sealant applied with cotton rolls isolation, (3) Ionomeric sealant applied with rubber dam isolation and (4) Ionomeric sealant applied with cotton rolls isolation. Fifty-eight patients started the study (232 teeth), and 47 (188 teeth) remained until the 1-year recall. The modified USPHS criteria were used in the analyzes to investigate surface texture, retention and the presence of secondary caries lesions around the sealants; in the following periods: baseline, after 3, 6, 9, and 12 months by two calibrated examiners. Data were analyzed by the Mann-Whitney and Friedman tests. RESULTS: There was no difference between the types of sealants (p > 0.05). The type of humidity control influenced the superficial texture (p = 0.0012) and the retention of sealants (p = 0.0023). The sealant displacement was greater under cotton rolls isolation. Only one active caries lesion in enamel was found in the 9th month. CONCLUSION: It may be concluded that sealants effectively prevented caries, even when they were partially or totally lost, regardless of the material. The rubber dam isolation with a rubber dam promoted lower surface roughness and improved the retention rates. International Clinical Trials Registry Platform: #1111-1215-2832 (07/26/2018).

Effects of low-level laser therapy combined with toluidine blue on polysaccharides and biofilm of Streptococcus mutans.

The aim of this study was to evaluate the effect of a low-level laser therapy in combination with toluidine blue on polysaccharides and biofilm of Streptococcus mutans. S. mutans biofilms were formed on acrylic resin blocks. These biofilms were exposed eight times/day to 10 % sucrose, and two times/day, they were subjected to one of the following treatments: G1, 0.9 % NaCl as a negative control; G2, 0.12 % chlorhexidine digluconate (CHX) as a positive antibacterial control; and G3 and G4 antimicrobial photodynamic therapy (aPDT) combined with toluidine blue using dosages of 320 and 640 J/cm(2), respectively. The experiment was performed in triplicate. The biofilm formed on each block was collected for determination of the viable bacteria and concentration of insoluble extracellular polysaccharides (IEPS) and intracellular polysaccharides (IPS). CHX and aPDT treatments were able to inhibit bacterial growth in comparison with negative control (p < 0.05). The aPDT treatment reduced the number of viable bacteria formed in the S. mutans biofilm, in a dose-dependent manner (p < 0.05). The concentration of IEPS and IPS in the biofilms formed in presence of aPDT did not differ each other or in comparison to CHX (p > 0.05). The results suggest that low-level laser therapy presents effects on biofilm bacteria viability and in polysaccharides concentration.

Influence of the Nd:YAG laser pulse duration on the temperature of primary enamel.

The aim of this study is to evaluate the temperature change on specimens of primary enamel irradiated with different pulse duration of Nd:YAG laser. Fifteen sound primary molars were sectioned mesiodistally, resulting in 30 specimens (3.5 × 3.5 × 2.0 mm). Two small holes were made on the dentin surface in which K-type thermocouples were installed to evaluate thermal changes. Specimens were randomly assigned in 3 groups (n = 10): A = EL (extra long pulse, 10.000 µs), B = LP (long pulse, 700 µs), and C = SP (short pulse, 350 µs). Nd:YAG laser (λ = 1.064 µm) was applied at contact mode (10 Hz, 0.8 W, 80 mJ) and energy density of 0.637 mJ/mm(2). Analysis of variance (ANOVA) was performed for the statistical analysis (P = 0.46). Nd:YAG laser pulse duration provided no difference on the temperature changes on primary enamel, in which the following means were observed: A = EL (23.15°C ± 7.75), B = LP (27.33°C ± 11.32), and C = SP (26.91°C ± 12.85). It can be concluded that the duration of the laser pulse Nd:YAG increased the temperature of the primary enamel but was not influenced by different pulse durations used in the irradiation.

CO2 laser and topical fluoride therapy in the control of caries lesions on demineralized primary enamel.

This study evaluated the effect of CO2 laser irradiation and topical fluoride therapy in the control of caries progression on primary teeth enamel. 30 fragments (3 × 3 × 2 mm) from primary canines were submitted to an initial cariogenic challenge that consisted of immersion on demineralizing solution for 3 hours and remineralizing solution for 21 hours for 5 days. Fragments were randomly assigned into three groups (n = 10): L: CO2 laser (λ = 10.6 µm), APF: 1.23% acidulated phosphate fluoride, and C: no treatment (control). CO2 laser was applied with 0.5 W power and 0.44 J/cm(2) energy density. Fluoride application was performed with 0.1 g for 1 minute. Cariogenic challenge was conducted for 5 days following protocol previously described. Subsurface Knoop microhardness was measured at 30 µm from the edge. Obtained data were subjected to analysis the variance (ANOVA) and Duncan test with significance of 5%. It was found that the L group showed greater control of deciduous enamel demineralization and were similar to those of APF group, while being statistically different from C group (P ≤ 0.05) that showed the lowest microhardness values. It was concluded that CO2 laser can be an additional resource in caries control progression on primary teeth enamel.

Er:YAG laser irradiation to control the progression of enamel erosion: an in situ study.

This in situ study evaluated the effect of Er:YAG laser irradiation in controlling the progression of enamel erosion-like lesions. Fifty-six enamel slabs (330 KHN ± 10 %) with one fourth of the surface covered with resin composite (control area) were submitted to initial erosion-like lesion formation with citric acid. The slabs were divided into two groups: irradiated with Er:YAG laser and non-irradiated. Fourteen volunteers used an intraoral palatal appliance containing two slabs, in two phases of 5 days each. During the intraoral phase, in a crossed-over design, half of the volunteers immersed the appliance in citric acid while the other half used deionized water, both for 5 min, three times per day. Enamel wear was determined by an optical 3D profilometer. ANOVA revealed that when deionized water was used as immersion solution during the intraoral phase, lower values of wear were showed when compared with the groups that were eroded with citric acid, whether irradiated or non-irradiated with Er:YAG laser. When erosion with citric acid was performed, Er:YAG laser was not able to reduce enamel wear. Small changes on enamel surface were observed when it was irradiated with Er:YAG laser. It may be concluded that Er:YAG laser irradiation did not reduce the progression of erosive lesions on enamel submitted to in situ erosion with citric acid.

Antimicrobial photodynamic therapy and dental plaque: a systematic review of the literature.

BACKGROUND: The aim of this study was to perform a systematic review of the literature on the efficacy of antimicrobial photodynamic therapy (PDTa) on cariogenic dental biofilm. TYPES OF STUDIES REVIEWED: Studies in vivo, in vitro, and in situ were included. Articles that did not address PDTa, those that did not involve cariogenic biofilm, those that used microorganisms in the plankton phase, and reviews were excluded. Data extraction and quality assessments were performed independently by two raters using a scale. RESULTS: Two hundred forty articles were retrieved; only seventeen of them met the eligibility criteria and were analyzed in the present review. Considerable variability was found regarding the methodologies and application protocols for antimicrobial PDTa. Two articles reported unfavorable results. PRACTICAL IMPLICATIONS: The present systematic review does not allow drawing any concrete conclusions regarding the efficacy of antimicrobial PDTa, although this method seems to be a promising option.

Microhardness and SEM after CO(2) laser irradiation or fluoride treatment in human and bovine enamel.

BACKGROUND: It remains uncertain as to whether or not CO(2) laser is able to hinder demineralization of enamel. The possibility to use bovine instead of human teeth on anticariogenic studies with laser has not yet been determined. PURPOSE: To compare the ability of CO(2) laser and fluoride to inhibit caries-like lesions in human enamel and to test whether a similar pattern of response would hold for bovine enamel. STUDY DESIGN: Ninety-six enamel slabs (2 × 2 × 4 mm) (48 from bovine and 48 from human teeth) were randomly distributed according to surface treatment (n = 12): CO(2) laser, 5% sodium fluoride varnish (FV), 1.23% acidulated phosphate fluoride (APF) gel, or no treatment (control). Specimens were subjected to a 14-day in vitro cariogenic challenge. Microhardness (SMH) was measured at 30 µm from the surface. For ultrastructural analysis, additional 20 slabs of each substrate (n = 5) received the same treatment described earlier and were analyzed by SEM. RESULTS: ANOVA and Tukey test ascertained that CO(2) laser promoted the least mineral loss (SMH = 252(a)). Treatment with FV resulted in the second highest values (207(b)), which was followed by APF (172(c)). Untreated specimens performed the worst (154(d)). SEM showed no qualitative difference between human and bovine teeth. APF and control groups exhibited surfaces covered by the smear layer. A granulate precipitate were verified on FV group and fusion of enamel crystals were observed on lased-specimens. CONCLUSIONS: CO(2) laser may control caries progression more efficiently than fluoride sources and bovine teeth may be a suitable substitute for human teeth in studies of this nature.

Bond durability in erbium:yttrium-aluminum-garnet laser-irradiated enamel.

This study sought to evaluate the influence of thermocycling and water storage on the microtensile bond strength of composite resin bonded to erbium:yttrium-aluminum-garnet (Er:YAG)-irradiated and bur-prepared enamel. Eighty bovine incisors were selected and sectioned. Specimens were ground to produce a flat enamel surface. Samples were randomly assigned according to cavity preparation device: (I) Er:YAG laser and (II) high-speed turbine, and were subsequently restored with composite resin. They were subdivided according to the duration of water storage (WS)/number of thermocycles (TCs): 24 h WS/no TCs; 7 days WS/500 TCs; 1 month WS/2,000 TCs; 6 months WS/12,000 TCs. The teeth were sectioned into 1.0 mm(2)-thick slabs and subjected to tensile stress in a universal testing machine. Data were submitted to two-way analysis of variance (ANOVA) and Tukey's test at a 0.05 significance level. The different periods of water storage and thermocycling did not influence the microtensile bond strength (microTBS) values in the Er:YAG laser-prepared groups. In bur-prepared enamel, the group submitted to 12,000 TCs/6 months' WS (IID) showed a significant decrease in bond strength values when compared to the group stored in water for 24 h and not submitted to thermocycling (IIA), but values were statistically similar to those obtained in all Er:YAG laser groups and in the bur- prepared groups degraded with 500 TCs/1 week WS (IIB) or 2,000 TCs/1 month WS (IIC). It may be concluded that adhesion of an etch-and-rinse adhesive to Er:YAG laser-irradiated enamel was not affected by the methods used to simulate degradation of the adhesive interface and was similar to adhesion in the bur-prepared groups in all periods of water storage and thermocycling.

SEM analysis of enamel surface treated by Er:YAG laser: influence of irradiation distance.

BACKGROUND: Depending on the distance of laser tip to dental surface a specific morphological pattern should be expected. However, there have been limited reports that correlate the Er:YAG irradiation distance with dental morphology. PURPOSE: To assess the influence of Er:YAG laser irradiation distance on enamel morphology, by means of scanning electron microscopy (SEM). METHODS: Sixty human third molars were employed to obtain discs (approximately =1 mm thick) that were randomly assigned to six groups (n=10). Five groups received Er:YAG laser irradiation (80 mJ/2 Hz) for 20 s, according to the irradiation distance: 11, 12, 14, 16, or 17 mm and the control group was treated with 37% phosphoric acid for 15 s. The laser-irradiated discs were bisected. One hemi-disc was separated for superficial analysis without subsequent acid etching, and the other one, received the phosphoric acid for 15 s. Samples were prepared for SEM. RESULTS: Laser irradiation at 11 and 12 mm provided an evident ablation of enamel, with evident fissures and some fused areas. At 14, 16 and 17 mm the superficial topography was flatter than in the other distances. The subsequent acid etching on the lased-surface partially removed the disorganized tissue. CONCLUSIONS: Er:YAG laser in defocused mode promoted slight morphological alterations and seems more suitable for enamel conditioning than focused irradiation. The application of phosphoric acid on lased-enamel surface, regardless of the irradiation distance, decreased the superficial irregularities.

Validity and reproducibility of different combinations of methods for occlusal caries detection: an in vitro comparison.

This study assessed the validity and reproducibility of different combinations of occlusal caries detection methods: visual examination (VE), laser fluorescence (LF) and radiographic examination (RE). Intra- and interexaminer reproducibilities were also assessed. Forty-seven extracted human molars were used and 121 sites, either suspected or not to be carious, were chosen. Occlusal surfaces were examined by 8 volunteers, assigned to three groups according to their level of knowledge and clinical experience on dental practice: group I, undergraduate students; group II, postgraduate students; group III, professors. Three combinations of methods were tested: A: VE+LF, B: VE+RE, C: VE+LF+RE. The examiners scored the sites using ranking scales and chose a final score based on their clinical experience. The gold standard was determined by histological examination of the sites. In general, LF and RE yielded poorer results than the combinations of methods. For combination A, group III showed the highest sensitivity, while group II showed the highest specificity. For combination B, group II showed moderate sensitivity whereas groups I and III exhibited low sensitivities; all groups of examiners reached substantial specificity. For combination C, all groups exhibited moderate sensitivity and substantial specificity. Interexaminer reproducibility ranged from fair to moderate for combinations A and C, while for combination B kappa values indicated moderate interexaminer reproducibility. It may be concluded that individual exams presented inferior performance than the conjunction of them. Combination C (VE+LF+RE) resulted in the best accuracy for all groups. The knowledge background of the examiners influenced their ability to detect caries lesions and affected interexaminer reproducibility.

Randomized, controlled trial comparing the retention of a flowable restorative system with a conventional resin sealant: one-year follow up.

UNLABELLED: This clinical trial evaluated the retention rate of a flowable restorative system (Bond 1 + Flow-It!) used as a pit-and-fissure sealant compared with a conventional filled resin sealant (Fluroshield) over a 1-year period. METHOD: Using a half-mouth design, 160 sealants (80 in primary and 80 in permanent teeth) were placed on sound first/second primary molars and first permanent molars of 40 children aged between 4 and 7 years. For both primary and permanent dentitions, half the teeth (n = 40) were sealed with Fluroshield and half (n = 40) with Bond 1 + Flow-It! Teeth were evaluated at baseline, 6- and 12-month intervals. RESULTS: For both materials, there was no total loss of sealants placed on either the primary or permanent molars over 1 year. From Fluroshield sealants placed on primary teeth, 33 were completely intact after 6 months and 31 after 1 year. From those placed on permanent molars, no loss of material was observed after 6 months, while partial loss was noticed on 5% of teeth at 1-year recall. For Flow-It! resin applied on primary molars, partial loss of material was observed in only 1 sealant after 6 months and in 2 sealants after 1 year. On permanent teeth, 100% retention rate was observed over a 1-year follow up. There was a statistically significant difference (P < 0.01) between the sealing materials on primary but not permanent teeth, and, overall, Flow-It! sealants presented a higher retention rate at both 6-month and 1-year evaluations. Significant differences (P < 0.01) between baseline and the other evaluation periods were also observed. CONCLUSION: It may be concluded that the flowable restorative system yielded optimal retention on both primary and permanent molars. Its retention rate was significantly higher than that of the conventional pit-and-fissure sealant on primary teeth.

Indirect aesthetic adhesive restoration with fibre-reinforced composite resin.

This paper describes the restoration of an endodontically treated upper first molar with a fibre-reinforced onlay indirect composite resin restoration. The clinical and radiographic examination confirmed that the tooth had suffered considerable loss of structure. Therefore, an indirect restoration was indicated. First, a core was built with resin-modified glass ionomer cement, followed by onlay preparation, mechanical/chemical gingival retraction and impression with addition-cured silicone. After the laboratory phase, the onlay was tried in, followed by adhesive bonding and occlusal adjustment. It can be concluded that fibre-reinforced aesthetic indirect composite resin restoration represented, in the present clinical case, an aesthetic and conservative treatment option. However, the use of fibres should be more extensively studied to verify the real improvement in physical and mechanical properties.

Clinical evaluation of low-level laser therapy and fluoride varnish for treating cervical dentinal hypersensitivity.

The aim of this study was to evaluate in vivo the use of low-level galium-aluminium-arsenide (GaAlAs) (BDP 600) laser and sodium fluoride varnish (Duraphat) in the treatment of cervical dentine hypersensitivity. Twelve patients, with at least two sensitive teeth were selected. A total of 60 teeth were included in the trial. Prior to desensitizing treatment, dentine hypersensitivity was assessed by a thermal stimulus and patients' response to the examination was considered to be a control. The GaAlAs laser (15 mW, 4 J/cm2) was irradiated on contact mode and fluoride varnish was applied at cervical region. The efficiency of the treatments was assessed at three examination periods: immediately after first application, 15 and 30 days after the first application. The degree of sensitivity was determined following predefined criteria. Data were submitted to analysis and no statistically significant difference was observed between fluoride varnish and laser. Considering the treatments separately, there was no significant difference for the fluoride varnish at the three examination periods, and for laser therapy, significant difference (P < 0.05) was found solely between the values obtained before the treatment and 30 days after the first application. It may be concluded that both treatments may be effective in decreasing cervical dentinal hypersensitivity. Moreover, the low-level GaAlAs laser showed improved results for treating teeth with higher degree of sensitivity.

Assessing microleakage of different class V restorations after Er:YAG laser and bur preparation.

This study assessed in vitro marginal leakage of class V cavities prepared by turbine and Er:YAG laser and restored with different materials. Sixty cavities with enamel and dentine margins were prepared and assigned to six groups: I, II, III by turbine and IV, V, VI by Er:YAG laser. The following restorative systems were used: groups I and IV: Bond 1 + Alert; II and V: Fuji II LC; III and VI: SBMP + Dispersalloy. After finishing, specimens were thermocycled for 8 h and 45 min (500 cycles), isolated, immersed in a 0.2% Rhodamine B solution, sectioned oro-facially and analysed for leakage. The dye penetration means (%) were: occlusal I: 10.09 (+/- 21.28), II: 3.25 (+/- 10.27), III: 0, IV: 41.77 (+/- 42.48), V: 23.37 (+/- 33.79), VI: 12.66 (+/- 24.06); cervical I: 16.49 (+/- 26.67), II: 4.34 (+/- 13.71), III: 0, IV: 37.71 (+/- 30.47), V: 39.56 (+/- 43.35) and VI: 72.53 (+/- 37.79). The use of Er:YAG laser for cavity preparation yielded higher degree of marginal leakage, as compared with the use of conventional air-turbine. The enamel interface provided better marginal sealing, comparing with dentine/cementum margin. As to the cavity preparation device (i.e. laser or bur), the analysis of the results showed that bonded amalgam and Fuji II LC provided less infiltration, than Alert. On the other hand, for lased cavities, Alert provided the best results, similar to those of Fuji II LC and superior to those reached by bonded amalgam.

Evaluation of motivation methods used to obtain appropriate oral hygiene levels in schoolchildren.

The aim of the present study is to assess the behaviour of different motivation methods on levels of oral hygiene among schoolchildren aged from 7 to 9 years in Araraquara, SP, Brazil. The methods tested were: indirect instruction using 'The Smiling Robot' (group I), indirect instruction through class presentation (group II) and direct instruction with macromodels (group III). A control group was also constituted, which received no kind of motivation (group IV). The O'Leary Plaque Index was used as the evaluation method, applied before the instruction and 30 days after application of the different methods. It was noted that the plaque index had not decreased in group IV only. In conclusion, all the motivation methods promoted significant decrease of plaque index and among these methods, the 'The Smiling Robot' was the one that provided the best results.

Microleakage of class V resin composite restorations after bur, air-abrasion or Er:YAG laser preparation.

This in vitro study compared the microleakage of Class V resin composite restorations placed in cavities prepared with a high-speed dental bur, air-abrasion or Er:YAG laser. Twenty sound extracted human third molars were selected and randomly assigned to four equal Groups (n=10): Group I, cavities were cut by dental drill at high-speed; Group II, aluminum oxide air-abrasion was used for cavity preparation, and in Groups III and IV, cavities were prepared by Er:YAG laser. Following cavity preparation, Groups I and II were acid-etched, Group III was treated only by Er:YAG laser and Group IV was conditioned by Er:YAG laser followed by acid-etching. Cavities were restored (Single Bond + Z-100) and the teeth stored for seven days in distilled water. Then, the restorations were polished and the specimens thermocycled, immersed in a 0.2% Rhodamine solution, sectioned and analyzed for leakage at the occlusal (enamel) and cervical (dentin/cementum) interfaces using an optical microscope connected to a video camera. The images were digitized and software was utilized for microleakage assessment. Upon analyzing the results, statistically significant differences (p<0.01) between the occlusal and cervical regions for all groups was observed, and, as a rule, there was better marginal sealing at the enamel margins. The highest degree of infiltration was observed for cavities prepared and treated exclusively by Er:YAG (Group III). The other experimental groups showed statistical similarities in the amount of marginal leakage at the enamel margins. However, at the cervical margins, there was a significant difference (p<0.05) between Group I and the remaining groups. None of the techniques completely eliminated marginal microleakage at the dentin/ cementum margins.

Microleakage of a resin sealant after acid-etching, Er:YAG laser irradiation and air-abrasion of pits and fissures.

OBJECTIVE: The aim of this in vitro study was to assess microleakage underneath a filled pit-and-fissure sealant bonded to occlusal surfaces treated by four enamel etching techniques. SUMMARY BACKGROUND DATA: There has been no report of a study assessing microleakage of a pit-and-fissure sealant, comparing acid-etching, Er:YAG laser and air-abrasion for treating enamel surface. METHODS: Forty extracted human third molars were selected and randomly assigned into four groups of ten teeth: group I, the occlusal surfaces were acid-etched; group II, a very short pulsed Er:YAG laser was used to treat the surfaces; group III, aluminum oxide air-abrasion was associated with acid-etching; group IV, Er:YAG laser was associated with acid-conditioning. The surfaces were sealed and the teeth were stored for 7 days in distilled water. Then, specimens were thermocycled, immersed in a 0.2% rhodamine solution, sectioned, and analyzed for leakage using an optical microscope connected to a video camera. The images were digitized and analyzed by software that allowed microleakage assessment in millimeters. RESULTS: Statistical analysis showed that occlusal surfaces treated exclusively by the Er:YAG laser (group II) provided the poorest marginal sealing and that acid-etching (group I) was statistically similar to aluminum oxide air-abrasion + acid etching (group III) and to Er:YAG laser + acid-etching (group IV). CONCLUSIONS: The results suggest that complementing either air-abrasion or Er:YAG laser irradiation with a subsequent acid-conditioning did not lessen microleakage at the enamel-sealant interface when compared with an acid-etched group. It was also observed that treating the enamel surface exclusively by Er:YAG laser resulted in the highest degree of leakage.

Influence of the retention of antiseptic solution dyes on the translucence of glass-ionomer cements.

Due to the great importance that antiseptic solutions have on the control and prevention of oral diseases and their influence on the translucence of esthetic restorative materials, the present study evaluated the effect of antiseptic solutions on the translucence of two glass-ionomer cements, Vidrion R and Chelon Fil, at eight time periods. Four antiseptic solutions were used: Listerine, Malvona, Flogoral and Plax. Vidrion R was less translucent than Chelon Fil. Translucence decreased with longer observation time and Malvona caused the lowest translucence.