Efficient Film Fabrication and Characterization of Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) (PEDOT:PSS)-Metalloporphine Nanocomposite and Its Application as Semiconductor Material.

The use of composite films with semiconductor behavior is an alternative to enhance the efficiency of optoelectronic devices. Composite films of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and metalloporphines (MPs; M = Co, Cu, Pd) have been prepared by spin-coating. The PEDOT:PSS-MP films were treated with isopropanol (IPA) vapor to modify the polymer structure from benzoid to quinoid. The quinoid structure promotes improvements in the optical and electrical behavior of films. The composite films' morphology and structure were characterized using infrared and Raman spectroscopy, scanning electron microscopy (SEM), and atomic force microscopy (AFM). Composite films were analyzed for their optical behavior by ultraviolet-visible spectroscopy: at λ < 450 nm, the films become transparent, indicating the capacity to be used as transparent electrodes in optoelectronic devices. At λ ≥ 450 nm, the absorbance in the films increased significantly. The CoP showed an 8 times larger current density compared to the CuP. A light induced change in the J-V curves was observed, and it is larger for the CoP. The conductivity values yielded between 1.23 × 102 and 1.92 × 103 Scm-1 and were higher in forward bias.

Study of Si and Ge Atoms Termination Using H-Dilution in SiGe:H Alloys Deposited by Radio Frequency (13.56 MHz) Plasma Discharge at Low Temperature.

In this work, we present the study of the atomic composition in amorphous SiXGeY:HZ films deposited by radio frequency (RF-13.56 MHz) plasma discharge at low deposition temperature. A study and control of Si and Ge atoms termination using H-dilution in SiGe:H alloys deposited by RF plasma discharge was conducted and we made a comparison with low-frequency plasma discharge studies. Solid contents of the main elements and contaminants were determined by SIMS technique. It was found that for low dilution rates from RH = 9 to 30, the germanium content in the solid phase strongly depends on the hydrogen dilution and varies from Y = 0.49 to 0.68. On the other hand, with a higher presence of hydrogen in the mixture, the germanium content does not change and remains close to the value of Y = 0.69. The coefficient of Ge preferential incorporation depended on RH and varied from PGe = 0.8 to 4.3. Also, the termination of Si and Ge atoms with hydrogen was studied using FTIR spectroscopy. Preferential termination of Si atoms was observed in the films deposited with low RH < 20, while preferential termination of Ge atoms was found in the films deposited with high RH > 40. In the range of 20 < RH < 40, hydrogen created chemical bonds with both Si and Ge atoms without preference.

Nanostructural Modification of PEDOT:PSS for High Charge Carrier Collection in Hybrid Frontal Interface of Solar Cells.

In this work, we propose poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) material to form a hybrid heterojunction with amorphous silicon-based materials for high charge carrier collection at the frontal interface of solar cells. The nanostructural characteristics of PEDOT:PSS layers were modified using post-treatment techniques via isopropyl alcohol (IPA). Atomic force microscopy (AFM), Fourier-transform infrared (FTIR), and Raman spectroscopy demonstrated conformational changes and nanostructural reorganization in the surface of the polymer in order to tailor hybrid interface to be used in the heterojunctions of inorganic solar cells. To prove this concept, hybrid polymer/amorphous silicon solar cells were fabricated. The hybrid PEDOT:PSS/buffer/a-Si:H heterojunction demonstrated high transmittance, reduction of electron diffusion, and enhancement of the internal electric field. Although the structure was a planar superstrate-type configuration and the PEDOT:PSS layer was exposed to glow discharge, the hybrid solar cell reached high efficiency compared to that in similar hybrid solar cells with substrate-type configuration and that in textured well-optimized amorphous silicon solar cells fabricated at low temperature. Thus, we demonstrate that PEDOT:PSS is fully tailored and compatible material with plasma processes and can be a substitute for inorganic p-type layers in inorganic solar cells and related devices with improvement of performance and simplification of fabrication process.

AZO/PEDOT:PSS Polymer Frontal Interface Deposited on Flexible Substrates for a-Si:H Photovoltaic Applications.

Thin-film hybrid organic-inorganic photovoltaic structures based on hydrogenated silicon (Si:H), poly(3,4ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) polymer Al-doped ZnO (AZO) films deposited on different types of flexible substrates have been fabricated and investigated. The compatibility of the polymer and inorganic materials regimes and deposition techniques used for device fabrication has been demonstrated on flexible substrates. Morphological characteristics of transparent Al-doped ZnO (AZO) films deposited on substrates have been measured by atomic force microscopy. Electronic characteristics of the fabricated photovoltaic structures have been measured and analyzed for different thicknesses of the transparent electrodes and different substrate types. Photovoltaic hybrid structure on polyethylene naphthalate (PEN) substrate showed the best characteristics: short circuit current density Jsc = 9.79 mA/cm², open circuit voltage Uoc = 565 mV, and PCE η = 1.3%. To analyze the mechanisms governing the device performance, short circuit current density spectral dependence of the devices fabricated on different types of flexible substrates has been measured. As demonstrated by our analysis, the structures on PEN substrates, besides better substrate transmittance, also show better junction properties.