3D-printed microchip electrophoresis device containing spiral electrodes for integrated capacitively coupled contactless conductivity detection.

In this work, we demonstrate for the first time the design and fabrication of microchip electrophoresis devices containing cross-shaped channels and spiral electrodes around the separation channel for microchip electrophoresis and capacitively coupled contactless conductivity detection. The whole device was prepared in a digital light processing-based 3D printer in poly(ethylene glycol) diacrylate resin. Outstanding X-Y resolution of the customized 3D printer ensured the fabrication of 40-µm cross section channels. The spiral channels were filled with melted gallium to form conductive electrodes around the separation channel. We demonstrate the applicability of the device on the separation of sodium, potassium, and lithium cations by microchip electrophoresis. Graphical abstract.

Fast methods for simultaneous determination of arginine, ascorbic acid and aspartic acid by capillary electrophoresis.

Arginine (ARG), ascorbic acid (ASC) and aspartic acid (ASP) are very popular and widely consumed active ingredients used for fatigue treatment or improvement of physical performance. For this reason, these compounds are usually available in the same pharmaceutical formulation. In the current paper, we describe for the first-time methods for simultaneous determination of ARG, ASC and ASP using capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C4D) and with UV spectrophotometric detection (CE-UV). The proposed methods are simple, rapid (78 and 23 injections h-1, respectively) and have low environmental impact (minimal waste generation). The separation by CE-C4D was achieved with a background electrolyte (BGE) composed by 20 mmol L-1 N-tris(hydroxymethyl)- methyl]-3-aminopropanesulfonic acid (TAPS) and 10 mmol L-1 of NaOH (pH 8.7). The limits of detection (LOD) were 0.01, 0.02 and 0.04 mmol L-1 for ARG, ASC and ASP, respectively. The proposed CE-UV method was optimized with a BGE composed by 10 mmol L-1 sodium tetraborate (pH 9.4). The limits of detection (LOD) were 0.03, 0.02 and 0.04 mmol L-1 for ARG, ASC and ASP, respectively. No statistically significant differences were observed (95% confidence level) between the results obtained by the developed CE methods and reference procedures (HPLC for ARG, iodometry for ASC and, acid-base titration for ASP).

Screening of seized cocaine samples using electrophoresis microchips with integrated contactless conductivity detection.

This study describes the development of a new analytical method for the separation and detection of cocaine (COC) and its adulterants, or cutting agents, using microchip electrophoresis (ME) devices coupled with capacitively coupled contactless conductivity detection (C4 D). All the experiments were carried out using a glass commercial ME device containing two pairs of integrated sensing electrodes. The running buffer composed of 20 mmol/L amino-2-(hydroxymethyl) propane-1,3-diol and 10 mmol/L 3,4-dimethoxycinnamic acid provided the best separation conditions for COC and its adulterants with baseline resolution (R > 1.6), separation efficiencies ranging from (2.9 ± 0.1) to (3.2 ± 0.2) × 105 plates/m, and estimated LOD values between 40 and 150 µmol/L. The quantification of COC was successfully performed in four samples seized by the Brazilian Federal Police Department and all predicted values agree with values estimated by the reference method. Some other interfering species were detected in the seized samples during the screening procedure on ME-C4 D devices. While lidocaine was detected in sample 3, the presence of levamisole was observed in samples 2 and 4. However, their concentrations were estimated to be below the LOQ. ME-C4 D devices have proved to be quite efficient for the identification and quantification of COC with errors lower than 10% when compared to the data obtained by a reference method. The approach herein reported offers great potential to be used for on-site COC screening in seized samples.