Chrysin attenuates epithelial prostatic hyperplasia in the ventral prostate of spontaneously hypertensive rats.

The aim of this study was to evaluate the effects of chrysin on the ventral prostate of spontaneously hypertensive rats (SHR). Ten-week-old male Wistar and SHR rats received 100 mg/kg/day of chrysin (TW and TSHR) or 200 µL/day of the dilution vehicle (CW and CSHR) for 70 days. After the treatment, the animals were euthanized and the prostates were dissected out, fixed, and processed for further morphological, immunohistochemical, and biochemical analyses. Blood was collected for serological analysis. Chrysin did not interfere with the blood pressure. Morphologically, the epithelial height increased in TW and decreased in TSHR. Stereology showed an increase in the epithelial and stromal relative frequency, and a decrease in the lumen of TW, whereas the epithelium in TSHR was reduced. Normal alveoli decreased, and hyperplastic alveoli had an increment in TW, whereas in TSHR normal alveoli increased and intense hyperplasia decreased. The secretion area was reduced in TW. Immunohistochemical analysis showed a smaller number of PCNA-positive cells in TW. Finally, the biochemical analysis showed a reduction in malondialdehyde, carbonylated proteins, superoxide dismutase, and catalase in TW and TSHR. We concluded that the chrysin effect is dependent on the context in which this flavonoid is employed. In normal conditions, the anabolic potential of the chrysin was favored, disrupting the morphology of the prostate. However, when used in animals predisposed to develop hyperplasia, this flavonoid attenuates the hyperplastic status, improving the morphology of the gland.

Photo-crosslinkable hydrogel incorporated with bone matrix particles for advancements in dentin tissue engineering.

The objective of this study was to create injectable photo-crosslinkable biomaterials, using gelatin methacryloyl (GelMA) hydrogel, combined with a decellularized bone matrix (BMdc) and a deproteinized (BMdp) bovine bone matrix. These were intended to serve as bioactive scaffolds for dentin regeneration. The parameters for GelMA hydrogel fabrication were initially selected, followed by the incorporation of BMdc and BMdp at a 1% (w/v) ratio. Nano-hydroxyapatite (nHA) was also included as a control. A physicochemical characterization was conducted, with FTIR analysis indicating that the mineral phase was complexed with GelMA, and BMdc was chemically bonded to the amide groups of gelatin. The porous structure was preserved post-BMdc incorporation, with bone particles incorporated alongside the pores. Conversely, the mineral phase was situated inside the pore opening, affecting the degree of porosity. The mineral phase did not modify the degradability of GelMA, even under conditions of type I collagenase-mediated enzymatic challenge, allowing hydrogel injection and increased mechanical strength. Subsequently, human dental pulp cells (HDPCs) were seeded onto the hydrogels. The cells remained viable and proliferative, irrespective of the GelMA composition. All mineral phases resulted in a significant increase in alkaline phosphatase activity and mineralized matrix deposition. However, GelMA-BMdc exhibited higher cell expression values, significantly surpassing those of all other formulations. In conclusion, our results showed that GelMA-BMdc produced a porous and stable hydrogel, capable of enhancing odontoblastic differentiation and mineral deposition when in contact with HDPCs, thereby showing potential for dentin regeneration.

Impact of the spatial orientation of the patient's head, metal artifact reduction, and tube current on cone-beam computed tomography artifact expression adjacent to a dental implant: A laboratory study using a simulated surgical guide.

Purpose: The aim of this study was to evaluate image artifacts in the vicinity of dental implants in cone-beam computed tomography (CBCT) scans obtained with different spatial orientations, tube current levels, and metal artifact reduction algorithm (MAR) conditions. Materials and Methods: One dental implant and 2 tubes filled with a radiopaque solution were placed in the posterior region of a mandible using a surgical guide to ensure parallel alignment. CBCT scans were acquired with the mandible in 2 spatial orientations in relation to the X-ray projection plane (standard and modified) at 3 tube current levels: 5, 8, and 11 mA. CBCT scans were repeated without the implant and were reconstructed with and without MAR. The mean voxel and noise values of each tube were obtained and compared using multi-way analysis of variance and the Tukey test (α=0.05). Results: Mean voxel values were significantly higher and noise values were significantly lower in the modified orientation than in the standard orientation (P<0.05). MAR activation and tube current levels did not show significant differences in most cases of the modified spatial orientation and in the absence of the dental implant (P>0.05). Conclusion: Modifying the spatial orientation of the head increased brightness and reduced spatial orientation noise in adjacent regions of a dental implant, with no influence from the tube current level and MAR.

In Silico Typing and Identification Confirmation of Isolates.

Streptococcus suis is an important zoonotic pathogen causing severe infections in pigs and humans. Serotyping of S. suis strains is crucial for epidemiological surveillance, outbreak investigations, and understanding the pathogenesis of this bacterium. Here, we describe a step-by-step approach that enhances a previously developed pipeline by utilizing a computational script for efficient and accurate typing of S. suis strains. The pipeline is implemented in Perl programming language and leverages the Short Read Sequence Typing for Bacterial Pathogens (SRST2) tool. It integrates various bioinformatics techniques and utilizes multiple databases, including a serotype database, cpsH confirmation database, multi-locus sequence typing (MLST) database, recN species-specific gene database, and virulence gene database. These databases contain comprehensive information on S. suis serotypes, genetic markers, and virulence factors. The script can utilize paired-end or single-end fastq files as input and first confirms the species by sequence read data aligning to the recN gene, ensuring the accurate identification of S. suis strains. The pipeline next performs MLST typing and virulence factor identification using SRST2 while in a parallel processes it performs in silico serotyping of the strains. The pipeline offers a streamlined and semiautomated approach to serotyping S. suis strains, facilitating large-scale studies and reducing the manual effort required for data analysis.

Experimental Intraperitoneal Infection of Piglets.

Streptococcus suis is a swine bacterial pathogen that predominantly causes disease in weaned piglets characterized by swelling of joints, arthritis, septicemia, meningitis, and sudden death. Intravenous, intramuscular, intraperitoneal, and intranasal infection models were developed to study the bacterial pathogenicity and efficacy of vaccines and various therapeutics. The selection of the appropriate infection model is a critical step in any study, as it may impact the outcomes of the study. Here we describe a method for infecting weaned piglets with S. suis using intraperitoneal route as a reliable, consistent, and reproducible animal model to evaluate vaccine protection against systemic bacterial infection.

Ocular diagnostics, ophthalmic findings, and conjunctival microbiome in the Chilean flamingo (Phoenicopterus chilensis).

OBJECTIVE: To establish normative data for selected ocular diagnostic tests and commensal conjunctival microflora and describe the incidence of ocular pathology in Chilean flamingos. ANIMALS STUDIED: A total of 41 Chilean flamingos were examined at the Blank Park Zoo in Des Moines, Iowa. PROCEDURES: In 20 flamingos, blink rate was assessed undisturbed in their exhibit, then gentle manual restraint was used to assess palpebral fissure length (PFL), aqueous tear production (phenol red thread test [PRTT] in one eye, endodontic absorbent paper point tear test [EAPPTT] in the other), intraocular pressure (IOP; rebound tonometry), and fluorescein staining. Twenty-one other flamingos were brought to a darkened area for neuro-ophthalmic examination, slit lamp biomicroscopy, and indirect ophthalmoscopy. Swabs from seven flamingos were used for ocular microbiome evaluation. RESULTS: Results are presented as mean ± standard deviation (range). Flamingos comprised 23 females/18 males, aged 11 ± 9.1 (0.7-40) years. Test results: blink rate, 3.7 ± 2 (1-9) blinks/min; PFL, 11.2 ± 1.2 (9-14) mm; IOP, 14 ± 3.2 (10-22) mmHg; EAPPT, 10.2 ± 2.8 (9-14) mm/min; PRTT, 6.8 ± 2.5 (3-13) mm/15 s. Dazzle reflex was positive in four birds examined. Pathologies included cataracts (n = 7 birds), corneal fibrosis (n = 3), endothelial pigment (n = 2), uveal cysts (n = 1), lens luxation (n = 1), and uveitis (n = 1). Ocular microbiome showed high diversity of taxa. CONCLUSIONS: Baseline ocular parameters and incidence of ophthalmic pathology assist veterinarians with disease screening for Chilean flamingos, while the ocular microbiome showed high diversity.

Influence of tube current and metal artifact reduction on the diagnosis of external cervical resorption in teeth adjacent to a dental implant in CBCT: an ex-vivo study.

OBJECTIVES: This ex-vivo study aimed to assess the influence of tube current (mA) and metal artifact reduction (MAR) on the diagnosis of early external cervical resorption (EECR) in cone-beam computed tomography (CBCT) in the presence of an adjacent dental implant. MATERIALS AND METHODS: Twenty-three single-rooted teeth were sectioned longitudinally and EECR was induced using a spherical drill and 5% nitric acid in 10 teeth. Each tooth was positioned in the socket of the lower right canine of a dry human mandible and CBCT scans were acquired using 90 kVp, voxel of 0.085 mm, field of view of 5 x 5 cm, and varying tube current (4, 8 or 12 mA), MAR (enabled or disabled) and implant conditions (with a zirconia implant in the socket of the lower right first premolar or without). Five oral radiologists evaluated the presence of EECR in a 5-point scale and the diagnostic values (area under the receiver operating characteristic curve - AUC, sensitivity, and specificity) were compared using multi-way Analysis of Variance (α = 0.05). Kappa test assessed intra-/inter-evaluator agreement. RESULTS: The tube current only influenced the AUC values in the presence of the implant and when MAR disabled; in this case, 8 mA showed lower values (p<0.007). MAR did not influence the diagnostic values (p>0.05). In general, the presence of an implant reduced the AUC values (p<0.0001); sensitivity values with 8 mA and MAR disabled, and specificity values with 4 mA and MAR enabled and 8 mA regardless MAR were also decreased (p<0.0001). CONCLUSIONS: Variations in tube current and MAR were unable to improve EECR detection, which was impaired by the presence of an adjacent implant. CLINICAL RELEVANCE: Increasing tube current or activating MAR tool does not improve EECR diagnosis, which is hampered by the artifacts generated by dental implants.

Molecular profile and epidemiological traits of Streptococcus suis isolated from diseased pigs in western Canada reveal multiple-serotype infection: Implications for disease control.

Objective: Streptococcus suis is a major agent of disease in modern swine operations, linked to increased mortality, treatment costs, and secondary infections. Although it is ubiquitous in swine, only a fraction of pigs develop clinical disease. The goals of this study were to profile isolates obtained from diseased pigs in western Canada and to investigate potential associations with disease severity. Procedure: Isolates of S. suis (n = 128) from 75 diagnostic submission and 63 premises were paired with epidemiological surveys completed by submitting practitioners (n = 22). Whole-genome sequencing was used to type isolates. Results: The most prevalent serotypes identified were 1/2 (7.8%, 10/128), 2 (9.3%, 12/128), 3 (9.3%, 12/128), and 7 (7.8%, 10/128); and sequence types 28 (17%, 23/128) and 839 (14%, 19/128). There was no association between serotype or sequence type and organ source or barn location. Approximately 74% (14/19) of the premises had diseased animals colonized by > 1 S. suis serotype, but only 1 pig was simultaneously infected with multiple serotypes and sequence types. Serotype distribution from diseased pigs in western Canada differed from that of those in other geographic regions. Conclusion: Infection of diseased pigs by multiple serotypes should be considered when disease control strategies are implemented. No association between S. suis type and isolation organ was identified.

Le profil moléculaire et les caractéristiques épidémiologiques de Streptococcus suis isolés de porcs malades dans l'ouest du Canada révèlent une infection à sérotypes multiples : implications pour la maitrise de la maladie. Objectif: Streptococcus suis est un agent pathogène majeur dans les exploitations porcines modernes, lié à une mortalité accrue, aux coûts de traitement et aux infections secondaires. Bien qu'elle soit omniprésente chez le porc, seule une fraction des porcs développe une maladie clinique. Les objectifs de cette étude étaient de dresser le profil des isolats obtenus à partir de porcs malades dans l'ouest du Canada et d'étudier les associations potentielles avec la gravité de la maladie. Procédure: Des isolats de S. suis (n = 128) provenant de 75 soumissions pour diagnostic et de 63 sites ont été associés à des enquêtes épidémiologiques réalisées auprès des praticiens soumettant les échantillons (n = 22). Le séquençage du génome entier a été utilisé pour typer les isolats. Résultats: Les sérotypes les plus répandus identifiés étaient 1/2 (7,8 %, 10/128), 2 (9,3 %, 12/128), 3 (9,3 %, 12/128) et 7 (7,8 %, 10/128); et les types de séquence 28 (17 %, 23/128) et 839 (14 %, 19/128). Il n'y avait aucune association entre le sérotype ou le type de séquence et la source d'organes ou l'emplacement de la ferme. Environ 74 % (14/19) des exploitations abritaient des animaux malades colonisés par > 1 sérotype de S. suis, mais 1 seul porc était infecté simultanément par plusieurs sérotypes et types de séquences. La répartition des sérotypes chez les porcs malades de l'ouest du Canada différait de celle des porcs d'autres régions géographiques. Conclusion: L'infection des porcs malades par plusieurs sérotypes doit être envisagée lors de la mise en oeuvre de stratégies de maitrise de la maladie. Aucune association entre le type de S. suis et l'organe d'isolement n'a été identifiée.(Traduit par Dr Serge Messier).

Potential impact of metal crowns at varying distances from a carious lesion on its detection on cone-beam computed tomography scans with several protocols.

Purpose: This study evaluated the impact of artifacts generated by metal crowns on the detection of proximal caries lesions in teeth at various distances using cone-beam computed tomography (CBCT). Additionally, the diagnostic impacts of tube current and metal artifact reduction (MAR) were investigated. Materials and Methods: Thirty teeth were arranged within 10 phantoms, each containing 1 first premolar, 1 second premolar, and 1 second molar. A sound first molar (for the control group) or a tooth with a metal crown was placed. Of the 60 proximal surfaces evaluated, 15 were sound and 45 exhibited enamel caries. CBCT scans were acquired using an OP300 Maxio unit (Instrumentarium, Tuusula, Finland), while varying the tube current (4, 8, or 12.5 mA) and enabling or disabling MAR. Five observers assessed mesial and distal surfaces using a 5-point scale. Multi-way analysis of variance was employed for data comparison, with P<0.05 indicating statistical significance. Results: The area under the curve (AUC) varied from 0.40 to 0.60 (sensitivity: 0.28-0.45, specificity: 0.44-0.80). The diagnostic accuracy was not significantly affected by the presence of a metal crown, milliamperage, or MAR (P>0.05). However, the overall AUC and specificity were significantly lower for surfaces near a crown (P<0.05). Conclusion: CBCT-based caries detection was not influenced by the presence of a metal crown, variations in milliamperage, or MAR activation. However, the diagnostic accuracy was low and was further diminished for surfaces near a crown. Consequently, CBCT is not recommended for the detection of incipient caries lesions.

Fertilization with follicular fluid reduces HSP70 and BAX expression on bovine in vitro embryos.

The in vivo fertilization process occurs in the presence of follicular fluid (FF). The aim of this study was to evaluate the effect of in vitro fertilization medium supplementation with 5% or 10% bovine follicular fluid (BFF) on the production of in vitro bovine embryos. FF was collected from ovarian follicles with a diameter of 8-10 mm, and cumulus-oocyte complexes (COCs) were co-incubated with sperm for 24 h in the commercial medium BotuFIV® (BotuPharma©), being distributed among the experimental groups: oocytes fertilized in a control medium; oocytes fertilized in a medium supplemented with 5% BFF; and oocytes fertilized in a medium supplemented with 10% BFF. After fertilization, the zygotes were cultured in vitro for 8 days. Embryo development was assessed through cleavage rates (day 2) and blastocyst formation rates (day 8). The relative expression of the genes OCT4, IFNT2, BAX, HSP70 and SOD2 was measured using the real-time polymerase chain reaction method. There was no difference (p > .05) among the different experimental groups in terms of cleavage rates and blastocyst formation rates. Regarding the gene expression results, only the blastocysts from oocytes fertilized with 10% BFF showed significantly lower expression of IFNT2 (p = .003) and SOD2 (p = .01) genes compared to blastocysts from oocytes fertilized in control medium alone, while there was no difference between blastocyst from oocytes fertilized in control medium and the ones from oocytes fertilized with 5% BFF. In addition to this, the blastocysts from oocytes fertilized with 5% BFF showed significantly reduced levels of expression of the heat shock protein HSP70 (p < .001) and the pro-apoptotic protein BAX (p = .015) compared to blastocysts from oocytes fertilized with control medium. This may indicate that lower supplementation of BFF to the IVF medium creates a more suitable environment for fertilization and is less stressful for the zygote.

Efficacy of acellular xenogeneic dermal matrix graft in the treatment of multiple gingival recessions: systematic review and meta-analysis.

OBJECTIVE: This study aimed to compare the efficacy of acellular xenogeneic dermal matrix graft (AXDM) compared to connective tissue graft (CTG) in treating multiple gingival recessions. MATERIALS AND METHODS: A systematic search of electronic databases was conducted to identify randomized clinical trials (RCTs) that compared AXDM and CTG. The selected studies were subjected to bias risk assessment, data extraction, and meta-analyses. Parameters such as gingival recession height, width, mean percentage of root coverage, and complete root coverage were analyzed. RESULTS: Seven RCTs involving 146 patients were included. The meta-analyses indicated that CTG was statistically superior to AXDM in reducing gingival recession height at the final follow-up (mean difference: -0.104 mm, 95% confidence interval [CI]: -0.180-0.028, p = 0.008) and width at the final follow-up (mean difference: -0.285 mm, 95% CI: -0.541-0.030, p = 0.029). CTG also demonstrated a significantly higher mean percentage of root coverage at the 6-month follow-up (difference in means: -2.761 mm, 95% CI: -4.932-0.590, p = 0.013) and a higher percentage of complete root coverage at the 6-month follow-up (odds Ratio [OR]: 0.598, 95% CI: 0.4-0.892, p = 0.012) compared to AXDM. However, there was no significant difference in the number of teeth with complete root coverage between CTG and AXDM (OR: 1.610, 95% CI: 0.983-2.636, p = 0.058) and aesthetic outcomes (mean difference: 0.148, 95% CI: -0.277-0.573, p = 0.494). CONCLUSIONS: CTG is more effective than AXDM in treating multiple gingival recessions. This is evidenced by significant reductions in gingival recession height and width, a higher mean percentage of root coverage, and a greater percentage of complete root coverage at the 6-month follow-up. CLINICAL RELEVANCE: In some clinical situations an alternative to CTG is required for the treatment of multiple gingival recessions. AXDM, despite presenting clinical outcomes that are not as satisfactory as CTG, can be used for this purpose.

Can Digital Enhancement Restore the Image Quality of Phosphor Plate-Based Radiographs Partially Damaged by Ambient Light?

To assess the effect of digital enhancement on the image quality of radiographs obtained with photostimulable phosphor (PSP) plates partially damaged by ambient light. Radiographs of an aluminum step wedge were obtained using the VistaScan and Express systems. Half of the PSP plates was exposed to ambient light for 0, 10, 30, 60, or 90 s before being scanned. The resulting radiographs were exported with and without digital enhancement. Metrics for brightness, contrast, and contrast-to-noise ratio (CNR) were derived, and the ratio of each metric between the exposed-to-light and non-exposed-to-light halves of the radiographs was calculated. The resulting ratios of the radiographs with digital enhancement were subtracted from those without digital enhancement and compared among each other. For the VistaScan system, digital enhancement partially restored brightness, contrast, and CNR. For the Express system, digital enhancement only restored CNR and not the impact of ambient light on brightness and contrast. Specifically, digital enhancement restored 23.48% of brightness for the VistaScan, while percentages below 1% were observed for the Express. Digital enhancement restored 53.25% of image contrast for the VistaScan and 5.79% for the Express; 40.71% of CNR was restored for the VistaScan, and 35% for the Express. Digital enhancement can partially restore the damage caused by ambient light on the brightness and contrast of PSP-based radiographs obtained with the VistaScan, as well as on CNR for the VistaScan and Express systems. The exposure of PSP plates to light can lead to unnecessary retakes and increased patient exposure to X-rays.

Association Between the Length of Leukocyte Telomeres and Functional Performance of Older Adults: Observational Study.

Despite current literature pointing to a link between shortened telomeres and aging, chronic diseases, and geriatric syndromes, the precise implications of this connection remain unclear. The aim of this exploratory, cross-sectional, observational study was to investigate the association between the relative telomere length (RTL) of peripheral blood leukocyte subtypes (mononuclear cells and granulocytes) and physical performance using the Short Physical Performance Battery (SPPB) in older adults. A cohort of 95 participants was recruited, which included men and women aged over 60 years (70.48 ± 5.5 years). It was found that mononuclear cell RTL was significantly lower than that of granulocytes (p < 0.0001). Moreover, individuals with good SPPB performance exhibited lower mononuclear cell RTL compared with those with moderate or poor performance. However, no significant differences were observed in granulocyte RTL between different SPPB performance groups. The global SPPB score showed an inverse correlation with mononuclear cell RTL, but this correlation was not present with granulocyte RTL. Similarly, the SPPB sit-to-stand domain correlated with mononuclear cell RTL, but no such correlation was found with granulocyte RTL. Our findings challenge conventional expectations, suggesting that shorter mononuclear cell RTL may be associated with favorable functional capacity. The variations in RTL between mononuclear cells and granulocytes highlight their distinct biological roles and turnover rates. A history of immune responses may influence mononuclear cell RTL dynamics, while telomerase activity may protect granulocyte RTL from significant shortening. The unexpected associations observed in mononuclear cell RTL emphasize the complex interplay between immune responses, cellular aging, and functional capacity in older adults.

Organ distribution and early pathogenesis of Streptococcus equi subsp. zooepidemicus in swine.

Streptococcus equi subsp. zooepidemicus is an emerging pathogen of pigs, resulting in high-mortality outbreaks of septicaemia and abortions. Here, we investigated the early pathogenesis of S. zooepidemicus in pigs following oronasal inoculation. Fourteen pigs were inoculated with live cultures of S. zooepidemicus ST-194, and monitored at 2,4, 8, and 24 h post-inoculation. Necropsies were performed to assess gross lesions and collect samples for bacterial culture and PCR analysis at each time point. Our findings revealed that S. zooepidemicus was detectable in various organs as early as 2 h post-inoculation, including liver and spleen, demonstrating rapid dissemination within the host. Tonsil samples consistently harboured live S. zooepidemicus throughout the study period, suggesting their potential for epidemiological sampling and diagnostics. Moreover, the presence of varying bacterial loads in mesenteric lymph nodes indicated persistence, replication, and a potential source for shedding. Further studies are required to determine the initial site of replication.

T-independent B-cell effect of agents associated with swine grower-finisher diarrhea.

Swine dysentery, spirochetal colitis, and salmonellosis are production-limiting enteric diseases of global importance to the swine industry. Despite decades of efforts, mitigation of these diseases still relies on antibiotic therapy. A common knowledge gap among the 3 agents is the early B-cell response to infection in pigs. Thus, this study aimed to characterize the porcine B-cell response to Brachyspira hyodysenteriae, Brachyspira hampsonii (virulent and avirulent strains), Brachyspira pilosicoli, and Salmonella Typhimurium, the agents of the syndromes mentioned above. Immortalized porcine B-cell line derived from a crossbred pig with lymphoma were co-incubated for 8 h with each pathogen, as well as E. coli lipopolysaccharide (LPS) and a sham-inoculum (n = 3/treatment). B-cell viability following treatments was evaluated using trypan blue, and the expression levels of B-cell activation-related genes was profiled using reverse transcription quantitative PCR. Only S. Typhimurium and LPS led to increased B-cell mortality. B. pilosicoli downregulated B-lymphocyte antigen (CD19), spleen associated tyrosine Kinase (syk), tyrosine-protein kinase (lyn), and Tumour Necrosis Factor alpha (TNF-α), and elicited no change in immunoglobulin-associated beta (CD79b) and swine leukocyte antigen class II (SLA-DRA) expression levels, when compared to the sham-inoculated group. In contrast, all other treatments significantly upregulated CD79b and stimulated responses in other B-cell downstream genes. These findings suggest that B. pilosicoli does not elicit an immediate T-independent B-cell response, nor does it trigger antigen-presenting mechanisms. All other agents activated at least one trigger within the T-independent pathways, as well as peptide antigen presenting mechanisms. Future research is warranted to verify these findings in vivo.

In Vitro Porcine (Explant) Colon Culture.

Models have been extensively used to investigate disease pathogenesis. Animal models are costly and require extensive logistics for animal care, and samples are not always suitable for different analytical techniques or to answer the research question. In vitro cell culture models are generally focused on recreating a specific characteristic of an organ and are limited to a single cell population that does not display the characteristic tissue architecture of the source organ. In addition, such models do not account for the many interactions between pathogens and the diverse cell subsets that are normally present in a given organ. Conclusions based on conventional 2D cell culture methods are limited, requiring extrapolation from a reductionist model to understand in vivo events. In vitro organ culture (IVOC) offers a way to overcome some of these limitations. Explants conserve important in vivo characteristics, such as different cell types and complex tissue architecture. This in vitro (ex vivo) organ culture protocol of the swine large intestine aims at maintaining viable colonic mucosa for up to 5 days. The protocol described herein applies a combination of methods used for immortalized cell culture and stem cell stimulation to support the physiological cellular flow inherent of the intestinal mucosa. Required equipment includes a hyperoxic chamber and culture at the air-liquid interface.

Evaluation of the Profile and Quality of Sphygmomanometers Available at a Health Education Institution in Belo Horizonte

Abstract Background Arterial hypertension affects around 30% of the Brazilian adult population, showing a direct and progressive relationship with an increased risk of cardiovascular diseases (CVDs). In this context, adjustments in the calibration and physical constitution of sphygmomanometers are essential conditions for obtaining correct blood pressure (BP) measurements. Objectives Analyze the profile and quality of sphygmomanometers used in various sectors of a health education institution in Belo Horizonte, Minas Gerais. Methods The present study conducted a cross-sectional, observational, and non-interventional study to assess adherence to various quality parameters of the sphygmomanometers available in the outpatient clinic, emergency department, and ward of an educational institution in the municipality of Belo Horizonte. Results We analyzed 78 devices, in which high rates of adherence were identified for velcro/pins, 93.5% (73/78); bulbs/rubbers, 92.1% (70/76); valves, 93.4% (71/76); the seal of the National Institute of Metrology, Quality, and Technology (INMETRO), 97.4% (76/78); and the clock, 92.1% (70/76). However, these parameters showed no statistical significance. Institutions (hospital/outpatient clinic) recorded higher calibration rates, 75% (39/52, p<0.001), in accordance with the deadlines stipulated by INMETRO, and the cuff/equipment compatibility showed its highest value (52%) among students (32/61, p = 0.004). Conclusion Our study showed that 38.4% (30/78) of the devices did not presented some type of inadequacy, with outpatient-owned devices had the highest compliance rate (p = 0.015). These findings are worrisome, as they can lead to inaccurate BP measurements.

Colostrum immunotherapy and length of hospital stay in preterm infants: an intervention study / Imunoterapia de colostro e tempo de internamento de prematuros: estudo de intervenção

Abstract Objectives: to evaluate the effect of oropharyngeal colostrum immunotherapy on the length of hospital stay in preterm newborns with very low birth weight. Methods: interventional ambispective study, which consisted of eight daily administrations of 0.2 ml (four drops) of colostrum, totaling up to 56 syringes (for up to seven days). The control was historic. The main independent variable: length of hospital stay (days). Survival analysis was performed using the Kaplan-Meier Method and the survival effect was estimated - Log Rank Test (Mantel-Cox) and Breslow Test (Generalized Wilcoxon). A significance level of 5% was adopted. Results: of the 109 mother/child pairs, 56 were part of the treatment and 53 were part of the control group. There was no association between oropharyngeal colostrum immunotherapy and length of stay for preterm newborns with very low birth weight in the general sample. However, after stratification, a shorter hospital stay (42 versus 51 days, HR= 1.78, CI95%=1.02-3.09, p=0.04) was demonstrated among premature infants with ≥28 gestational weeks undergoing oropharyngeal colostrum immunotherapy. Conclusions: we found an association between oropharyngeal colostrum immunotherapy and shorter median length of hospital stay in the subgroup of premature infants ≥ 28 weeks of gestational age, but we did not find significant differences in those <28 weeks.

Resumo Objetivos: avaliar o efeito da imunoterapia orofaríngea de colostro no tempo de internamento hospitalar de recém-nascidos pré-termos de muito baixo peso. Métodos: estudo de intervenção, ambispectivo, que consistiu em oito administrações diárias de 0,2 ml (quatro gotas) de colostro, totalizando até 56 seringas (por até sete dias). O controle foi histórico. A variável independente principal: tempo de permanência hospitalar (dias). Realizada análise de sobrevivência pelo Método de Kaplan-Meier e estimado o efeito da sobrevida - Teste de Log Rank (Mantel-Cox) e Teste de Breslow (Wilcoxon Generalizado). Adotou-se o nível de significância de 5%. Resultados: das 109 duplas mães/filho, 56 fizeram parte da análise do grupo tratamento e 53 do controle. Não houve associação entre imunoterapia orofaríngea de colostro e tempo de internamento de recém-nascidos pré-termos de muito baixo peso na amostra geral. Após estratificação demonstrou-se menor tempo de permanência hospitalar (43 versus 51 dias, HR=1,78, IC95%= 1,02-3,09, p=0,04) entre os prematuros com ≥28 semanas gestacionais submetidos a imunoterapia orofaríngea de colostro. Conclusões: encontrou-se associação entre imunoterapia orofaríngea de colostro e menor mediana de tempo de internamento hospitalar no subgrupo de prematuros ≥ 28 semanas de idade gestacional, porém não foram encontradas diferenças significativas naqueles < 28 semanas.

Surface roughness of resin-based composites subjected to professional prophylaxis / Rugosidade de superfície de resinas compostas após profilaxia profissional

Objetivo: Avaliar o efeito de dois métodos de profilaxia sobre a rugosidade superficial de diferentes resinas compostas. Materiais e Métodos: Dez amostras (7 mm x 2 mm) foram confeccionadas para cada resina testada: MH - resina microhíbrida (viscosidade regular - Opallis); NH ­ resina nanohíbrida (viscosidade regular - Vittra APS); BF ­ resina bulk fill (alta viscosidade - Opus Bulk Fill); MHF ­ resina fluida microhíbrida (Opallis flow); e OS ­ resina nanohíbrida camaleão (viscosidade regular - Vittra Unique). Os valores iniciais de rugosidade (Rai) foram obtidos para cada amostra e então subdivididas em dois grupos (n = 5) seguindo o método de profilaxia: SB ­ jato de bicarbonato de sódio (125µm, 30 s, 10 mm de distância, 2 bar); e PP ­ profilaxia com pasta de pedra-pomes e escova rotatória (30 s, 3000 rpm e pressão de 150 g). Após, uma nova medida de Ra (Raf) foi obtida, e a diferença calculada (ΔRa). Os dados foram analisados pelo teste ANOVA três fatores e teste de Bonferroni, e a diferença de rugosidade (ΔRa) pelo teste Anova dois fatores e teste de Tukey (p<0,05). Resultados: MHF apresentou maior rugosidade após profilaxia com jato de bicarbonato, enquanto para NH a abrasão com pedra pomes foi mais deletéria. Para os demais grupos não houve diferença. Discussão: A alteração na rugosidade promovida pela profilaxia é material-dependente. Conclusão: A profilaxia profissional com jato de bicarbonato ou abrasão com pedra-pomes induziu alterações na rugosidade das resinas.

Aim: This study evaluated the effect of two prophylaxis methods over the surface roughness of different resin composites. Materials and Methods: Ten disc-shaped specimens (7 mm x 2 mm) were made for each composite tested: MH - microhybrid composite with regular viscosity (Opallis); NH ­ nanohybrid composite with regular viscosity (Vittra APS); BF ­ high-viscosity bulk fill composite (Opus Bulk Fill); MHF - microhybrid flowable composite (Opallis flow); and OS ­ nanohybrid one-shade composite with regular viscosity (Vittra Unique). Initial roughness (Ra) values were obtained from each sample, and then they were divided into two groups (n = 5) following the prophylaxis method: SB ­ prophylaxis with sodium bicarbonate powder (125µm grain) using an air-powder polishing device (30 s application distanced 10 mm with 2 bar); and PP ­ prophylaxis with pumice paste and rotatory brush (30 s, 3000 rpm and pressure of 150 g). After that, a new Ra measurement (Raf) was obtained, and the difference was calculated (ΔRa). Data were compared using Three-way ANOVA followed by Bonferroni teste and the Ra difference (ΔRa) was analyzed by Two-way ANOVA followed by the Tukey test (p<0.05). Results: MHF presented higher Ra values after receiving prophylaxis with SB, while for NH, the abrasion with pumice increased the Ra, and for the other groups, no differences were found. Discussion: Alteration promoted by prophylaxis is material dependent. Conclusion: Professional prophylaxis with a bicarbonate jet or abrasion with pumice-based paste can induce changes in the composites' roughness.

Rugosidade de superfície de resinas compostas após profilaxia profissional / Surface roughness of resin-based composites subjected to professional prophylaxis

Objetivo: Avaliar o efeito de dois métodos de profilaxia sobre a rugosidade superficial de diferentes resinas compostas. Materiais e Métodos: Dez amostras (7 mm x 2 mm) foram confeccionadas para cada resina testada: MH - resina microhíbrida (viscosidade regular - Opallis); NH ­ resina nanohíbrida (viscosidade regular - Vittra APS); BF ­ resina bulk fill (alta viscosidade - Opus Bulk Fill); MHF ­ resina fluida microhíbrida (Opallis flow); e OS ­ resina nanohíbrida camaleão (viscosidade regular - Vittra Unique). Os valores iniciais de rugosidade (Rai) foram obtidos para cada amostra e então subdivididas em dois grupos (n = 5) seguindo o método de profilaxia: SB ­ jato de bicarbonato de sódio (125µm, 30 s, 10 mm de distância, 2 bar); e PP ­ profilaxia com pasta de pedra-pomes e escova rotatória (30 s, 3000 rpm e pressão de 150 g). Após, uma nova medida de Ra (Raf) foi obtida, e a diferença calculada (ΔRa). Os dados foram analisados pelo teste ANOVA três fatores e teste de Bonferroni, e a diferença de rugosidade (ΔRa) pelo teste Anova dois fatores e teste de Tukey (p<0,05). Resultados: MHF apresentou maior rugosidade após profilaxia com jato de bicarbonato, enquanto para NH a abrasão com pedra pomes foi mais deletéria. Para os demais grupos não houve diferença. Discussão: A alteração na rugosidade promovida pela profilaxia é material-dependente. Conclusão: A profilaxia profissional com jato de bicarbonato ou abrasão com pedra-pomes induziu alterações na rugosidade das resinas.

Aim: This study evaluated the effect of two prophylaxis methods over the surface roughness of different resin composites. Materials and Methods: Ten disc-shaped specimens (7 mm x 2 mm) were made for each composite tested: MH - microhybrid composite with regular viscosity (Opallis); NH ­ nanohybrid composite with regular viscosity (Vittra APS); BF ­ high-viscosity bulk fill composite (Opus Bulk Fill); MHF - microhybrid flowable composite (Opallis flow); and OS ­ nanohybrid one-shade composite with regular viscosity (Vittra Unique). Initial roughness (Ra) values were obtained from each sample, and then they were divided into two groups (n = 5) following the prophylaxis method: SB ­ prophylaxis with sodium bicarbonate powder (125µm grain) using an air-powder polishing device (30 s application distanced 10 mm with 2 bar); and PP ­ prophylaxis with pumice paste and rotatory brush (30 s, 3000 rpm and pressure of 150 g). After that, a new Ra measurement (Raf) was obtained, and the difference was calculated (ΔRa). Data were compared using Three-way ANOVA followed by Bonferroni teste and the Ra difference (ΔRa) was analyzed by Two-way ANOVA followed by the Tukey test (p<0.05). Results: MHF presented higher Ra values after receiving prophylaxis with SB, while for NH, the abrasion with pumice increased the Ra, and for the other groups, no differences were found. Discussion: Alteration promoted by prophylaxis is material dependent. Conclusion: Professional prophylaxis with a bicarbonate jet or abrasion with pumice-based paste can induce changes in the composites' roughness.