The effect of chronic kidney disease on tissue formation of in situ tissue-engineered vascular grafts.

Vascular in situ tissue engineering encompasses a single-step approach with a wide adaptive potential and true off-the-shelf availability for vascular grafts. However, a synchronized balance between breakdown of the scaffold material and neo-tissue formation is essential. Chronic kidney disease (CKD) may influence this balance, lowering the usability of these grafts for vascular access in end-stage CKD patients on dialysis. We aimed to investigate the effects of CKD on in vivo scaffold breakdown and tissue formation in grafts made of electrospun, modular, supramolecular polycarbonate with ureido-pyrimidinone moieties (PC-UPy). We implanted PC-UPy aortic interposition grafts (n = 40) in a rat 5/6th nephrectomy model that mimics systemic conditions in human CKD patients. We studied patency, mechanical stability, extracellular matrix (ECM) components, total cellularity, vascular tissue formation, and vascular calcification in CKD and healthy rats at 2, 4, 8, and 12 weeks post-implantation. Our study shows successful in vivo application of a slow-degrading small-diameter vascular graft that supports adequate in situ vascular tissue formation. Despite systemic inflammation associated with CKD, no influence of CKD on patency (Sham: 95% vs CKD: 100%), mechanical stability, ECM formation (Sirius red+, Sham 16.5% vs CKD 25.0%-p:0.83), tissue composition, and immune cell infiltration was found. We did find a limited increase in vascular calcification at 12 weeks (Sham 0.08% vs CKD 0.80%-p:0.02) in grafts implanted in CKD animals. However, this was not associated with increased stiffness in the explants. Our findings suggest that disease-specific graft design may not be necessary for use in CKD patients on dialysis.

Marker-Independent Monitoring of in vitro and in vivo Degradation of Supramolecular Polymers Applied in Cardiovascular in situ Tissue Engineering.

The equilibrium between scaffold degradation and neotissue formation, is highly essential for in situ tissue engineering. Herein, biodegradable grafts function as temporal roadmap to guide regeneration. The ability to monitor and understand the dynamics of degradation and tissue deposition in in situ cardiovascular graft materials is therefore of great value to accelerate the implementation of safe and sustainable tissue-engineered vascular grafts (TEVGs) as a substitute for conventional prosthetic grafts. In this study, we investigated the potential of Raman microspectroscopy and Raman imaging to monitor degradation kinetics of supramolecular polymers, which are employed as degradable scaffolds in in situ tissue engineering. Raman imaging was applied on in vitro degraded polymers, investigating two different polymer materials, subjected to oxidative and enzymatically-induced degradation. Furthermore, the method was transferred to analyze in vivo degradation of tissue-engineered carotid grafts after 6 and 12 months in a sheep model. Multivariate data analysis allowed to trace degradation and to compare the data from in vitro and in vivo degradation, indicating similar molecular observations in spectral signatures between implants and oxidative in vitro degradation. In vivo degradation appeared to be dominated by oxidative pathways. Furthermore, information on collagen deposition and composition could simultaneously be obtained from the same image scans. Our results demonstrate the sensitivity of Raman microspectroscopy to determine degradation stages and the assigned molecular changes non-destructively, encouraging future exploration of this techniques for time-resolved quality assessment of in situ tissue engineering processes.

Supramolecular Biomaterials in the Netherlands.

Synthetically designed biomaterials strive to recapitulate and mimic the complex environment of natural systems. Using natural materials as a guide, the ability to create high-performance biomaterials that control cell fate, and support the next generation of cell- and tissue-based therapeutics, is starting to emerge. Supramolecular chemistry takes inspiration from the wealth of noncovalent interactions found in natural materials that are inherently complex, and using the skills of synthetic and polymer chemistry, recreates simple systems to imitate their features. Within the past decade, supramolecular biomaterials have shown utility in tissue engineering and the progress predicts a bright future. On this 30th anniversary of the Netherlands Biomaterials and Tissue Engineering society, we briefly recount the state of supramolecular biomaterials in the Dutch academic and industrial research and development context. This review provides the background, recent advances, industrial successes and challenges, as well as future directions of the field, as we see it. Throughout this work, we notice the intricate interplay between simplicity and complexity in creating more advanced solutions. We hope that the interplay and juxtaposition between these two forces can propel the field forward. Impact statement Supramolecular biomaterials based on noncovalent interactions hold the ability to rebuild some of the complexity of natural biomaterials in synthetic systems. While still in its infancy, the field is currently vigorously moving from fundamental experiments toward applications and products in the tissue engineering and regenerative medicine arena. Herein, we review the current state of the field in the Netherlands. While supramolecular biomaterials have incredible potential, systematic studies, balancing complexity and simplicity, efficient translation, and enhanced performance are all required for success of these strategies. As we move the field toward commercial solutions for clinical patients, we must also pay homage and remember the fundamental studies that allow these jumps in innovation.

Tailoring the foreign body response for in situ vascular tissue engineering.

This study describes a screening platform for a guided in situ vascular tissue engineering approach. Polymer rods were developed that upon 3 weeks of subcutaneous implantation evoke a controlled inflammatory response culminating in encapsulation by a tube-shaped autologous fibrocellular tissue capsule, which can form a basis for a tissue-engineered blood vessel. Rods of co-polymer were produced using different ratios of poly(ethylene oxide terephthalate) and poly(butylene terephthalate) to create a range of physicochemical properties. In addition, a set of different physical, chemical, and biological surface modifications were tested on their ability to actively steer this tissue capsule formation using a rat model as testing platform. Tissue capsules were mainly composed of circumferentially aligned collagen and myofibroblasts. Different implant material resulted in distinct differences in tissue capsule formation. Compared to its unmodified counterparts, all surface modifications resulted in increased wall thickness, collagen, and myofibroblasts. Oxygen plasma-treated rods resulted in loose tissue arrangement, collagen, and collagen/TGF-ß-coated rods yielded thick, collagen-rich, densely packed tissue capsules, though with a random distribution of myofibroblasts. In contrast, chloroform-etched rods provided homogenous densely packed tissue capsules, completely populated by myofibroblasts. In conclusion, by varying the implant's surface characteristics, tissue capsule composition, cell distribution, and tissue arrangement could be tailored, enabling controlled guidance of the tissue response for in vivo vascular tissue engineering.

Poly-ε-caprolactone scaffold and reduced in vitro cell culture: beneficial effect on compaction and improved valvular tissue formation.

Tissue-engineered heart valves (TEHVs), based on polyglycolic acid (PGA) scaffolds coated with poly-4-hydroxybutyrate (P4HB), have shown promising in vivo results in terms of tissue formation. However, a major drawback of these TEHVs is compaction and retraction of the leaflets, causing regurgitation. To overcome this problem, the aim of this study was to investigate: (a) the use of the slowly degrading poly-ε-caprolactone (PCL) scaffold for prolonged mechanical integrity; and (b) the use of lower passage cells for enhanced tissue formation. Passage 3, 5 and 7 (P3, P5 and P7) human and ovine vascular-derived cells were seeded onto both PGA-P4HB and PCL scaffold strips. After 4 weeks of culture, compaction, tissue formation, mechanical properties and cell phenotypes were compared. TEHVs were cultured to observe retraction of the leaflets in the native-like geometry. After culture, tissues based on PGA-P4HB scaffold showed 50-60% compaction, while PCL-based tissues showed compaction of 0-10%. Tissue formation, stiffness and strength were increased with decreasing passage number; however, this did not influence compaction. Ovine PCL-based tissues did render less strong tissues compared to PGA-P4HB-based tissues. No differences in cell phenotype between the scaffold materials, species or cell passage numbers were observed. This study shows that PCL scaffolds may serve as alternative scaffold materials for human TEHVs with minimal compaction and without compromising tissue composition and properties, while further optimization of ovine TEHVs is needed. Reducing cell expansion time will result in faster generation of TEHVs, providing more rapid treatment for patients.

Tissue-engineered heart valves develop native-like collagen fiber architecture.

Creating autologous tissues with on-demand and native-like biomechanical properties is the ultimate challenge in functional heart valve tissue engineering. A promising approach toward this goal is to induce development of native-like tissue structure in vitro by mimicking the diastolic loading phase in a bioreactor. Heart valves cultured with this approach showed in vitro sufficient strength to withstand systemic pressures. This study aims to link global functioning of these valves to the development of a native-like fiber architecture induced by in vitro diastolic loading. It is hypothesized that increased loading magnitude during culture will lead to increased collagen fiber alignment. To test this hypothesis, 10 tissue-engineered heart valves were subjected to different loading protocols in vitro. Local fiber distribution and mechanics were determined in an inverse numerical-experimental approach, combining indentation tests with confocal imaging. Indentation tests on native ovine heart valves were used as a comparison. Although the effect of loading magnitude was small within the tested range, results indicated that the local fiber architecture indeed developed toward native structural properties for all loading protocols. However, apparent fiber mechanics were much stiffer compared with native. This confirms that in vitro mechanical conditioning induces development of a native-like tissue architecture, which underlines its importance for functional heart valve tissue engineering.

The non-linear mechanical properties of soft engineered biological tissues determined by finite spherical indentation.

The mechanical properties of soft biological tissues in general and early stage engineered tissues in particular limit the feasibility of conventional tensile tests for their mechanical characterisation. Furthermore, the most important mode in development of deep tissue injury (DTI) is compression. Therefore, an inverse numerical-experimental approach using a finite spherical indentation test is proposed. To demonstrate the feasibility of the approach indentation tests are applied to bio-artificial muscle (BAM) tissue. BAMs are cultured in vitro with (n = 20) or without (n = 12) myoblast cells to quantify the effect of the cells on the passive transverse mechanical properties. Indentation tests are applied up to 80% of the tissue thickness. A non-linear Neo-Hookean constitutive model is fitted to the experimental results for parameter estimation. BAMs with cells demonstrated both stiffer and more non-linear material behaviour than BAMs without cells.

Remodelling of the angular collagen fiber distribution in cardiovascular tissues.

Understanding collagen fiber remodelling is desired to optimize the mechanical conditioning protocols in tissue-engineering of load-bearing cardiovascular structures. Mathematical models offer strong possibilities to gain insight into the mechanisms and mechanical stimuli involved in these remodelling processes. In this study, a framework is proposed to investigate remodelling of angular collagen fiber distribution in cardiovascular tissues. A structurally based model for collagenous cardiovascular tissues is extended with remodelling laws for the collagen architecture, and the model is subsequently applied to the arterial wall and aortic valve. For the arterial wall, the model predicts the presence of two helically arranged families of collagen fibers. A branching, diverging hammock-type fiber architecture is predicted for the aortic valve. It is expected that the proposed model may be of great potential for the design of improved tissue engineering protocols and may give further insight into the pathophysiology of cardiovascular diseases.

Mechanical characterization of anisotropic planar biological soft tissues using finite indentation: experimental feasibility.

Heart valve tissue engineering offers a promising alternative for current treatment and replacement strategies, e.g., synthetic or bioprosthetic heart valves. In vitro mechanical conditioning is an important tool for engineering strong, implantable heart valves. Detailed knowledge of the mechanical properties of the native tissue as well as the developing tissue construct is vital for a better understanding and control of the remodeling processes induced by mechanical conditioning. The nonlinear, anisotropic and inhomogeneous mechanical behavior of heart valve tissue necessitates a mechanical characterization method that is capable of dealing with these complexities. In a recent computational study we showed that one single indentation test, combining force and deformation gradient data, provides sufficient information for local characterization of nonlinear soft anisotropic tissue properties. In the current study this approach is validated in two steps. First, indentation tests with varying indenter sizes are performed on linear elastic PDMS rubbers and compared to tensile tests on the same specimen. For the second step, tissue constructs are engineered using uniaxial or equibiaxial static constrained culture conditions. Digital image correlation (DIC) is used to quantify the anisotropy in the tissue constructs. For both validation steps, material parameters are estimated by inverse fitting of a computational model to the experimental results.

Mechanical characterization of anisotropic planar biological soft tissues using large indentation: a computational feasibility study.

Traditionally, the complex mechanical behavior of planar soft biological tissues is characterized by (multi)axial tensile testing. While uniaxial tests do not provide sufficient information for a full characterization of the material anisotropy, biaxial tensile tests are difficult to perform and tethering effects limit the analyses to a small central portion of the test sample. In both cases, determination of local mechanical properties is not trivial. Local mechanical characterization may be performed by indentation testing. Conventional indentation tests, however, often assume linear elastic and isotropic material properties, and therefore these tests are of limited use in characterizing the nonlinear, anisotropic material behavior typical for planar soft biological tissues. In this study, a spherical indentation experiment assuming large deformations is proposed. A finite element model of the aortic valve leaflet demonstrates that combining force and deformation gradient data, one single indentation test provides sufficient information to characterize the local material behavior. Parameter estimation is used to fit the computational model to simulated experimental data. The aortic valve leaflet is chosen as a typical example. However, the proposed method is expected to apply for the mechanical characterization of planar soft biological materials in general.