Copper-Catalyzed Continuous-Flow Transfer Hydrogenation of Nitroarenes to Anilines: A Scalable and Reliable Protocol.

A robust supported catalyst that is made up of copper nanoparticles on Celite has been successfully prepared for the selective transfer hydrogenation of aromatic nitrobenzenes to anilines under continuous flow. The method is efficient and environmentally benign thanks to the absence of hydrogen gas and precious metals. Long-term stability studies show that the catalytic system is able to achieve very high nitrobenzene conversion (>99%) when working for up to 145 h. The versatility of the transfer hydrogenation system has been tested using representative examples of nitroarenes, with moderate-to-excellent yields being obtained. The packed bed reactor (PBR) permits the use of a setup that can provide products via simple isolation by SPE without the need for further purification. The recovery and reuse of either EG or the ion-exchange resin leads to consistent waste reduction; therefore, E-factor distribution analysis has highlighted the environmental efficiency of this synthetic protocol.

Complexes of Soluble Dietary Fiber and Polyphenols from Lotus Root Regulate High-Fat Diet-Induced Hyperlipidemia in Mice.

In this paper, complexes of soluble dietary fiber (SDF) and polyphenols (PPs) isolated from lotus roots were prepared (SDF-PPs), as well as physical mixtures (SDF&PPs), which were given to high-fat-diet (HFD)-fed mice. The results demonstrated that SDF-PPs improve lipid levels and reverse liver injury in hyperlipidemic mice. Western blotting and real-time quantitative Polymerase Chain Reaction (RT-qPCR) results showed that SDF-PPs regulated liver lipids by increasing the phosphorylation of Adenine monophosphate activated protein kinase (AMPK), up-regulating the expression of Carnitine palmitoyltransferase1 (CPT1), and down-regulating the expression of Fatty acid synthase (FAS) and 3-hydroxy-3-methyl glutaryl coenzyme A (HMG-CoA), as well as the transcription factor sterol-regulatory element binding protein (SPEBP-1) and its downstream liposynthesis genes. Additionally, the intervention of SDF-PPs could modulate the composition of intestinal gut microbes, inducing an increase in Lachnospiraceae and a decrease in Desulfovibrionaceae and Prevotellaceae in high-fat-diet-fed mice. Thus, the research provides a theoretical basis for the application of lotus root active ingredients in functional foods and ingredients.

The unveiling of a dynamic duo: hydrodynamic cavitation and cold plasma for the degradation of furosemide in wastewater.

The degradation in water of furosemide (FUR), a widely used diuretic drug, was herein reported. The method entails an integrated approach based on the hybridisation of hydrodynamic cavitation (HC) with electrical discharge (ED) plasma technology. This dynamic duo could increase the production of oxidising compounds in water, in particular hydroxyl radicals (OH radicals), by triggering the rapid homolytic decomposition of water molecules and avoiding the addition of external oxidants. This study clearly emphasises the effectiveness of an integrated approach to improve the degradation of pollutants in wastewater originating from active pharmaceutical ingredients (APIs). The results of HC/ED-assisted FUR degradation in the presence of radical scavengers highlight the predominant role of the radical oxidation mechanism at the gas-liquid interface of the cavitation bubble during HC/ED treatment. A comparative analysis of the three technologies-HC alone, HC/ED and UV alone-emphasised the promising potential of hybrid HC/ED as a scalable industrial technology. This is demonstrated by the higher degradation rates (100%, 10 min) when treating large volumes (5L) of wastewater contaminated with FUR (50 mg/L), even in the presence of other APIs.

Ultrasound-Driven Deposition of Au and Ag Nanoparticles on Citrus Pectin: Preparation and Characterisation of Antimicrobial Composites.

Pectin is a renewable, non-toxic and biodegradable polymer made of galacturonic acid units. Its polar groups make it suitable for complexing and supporting metallic nanoparticles (NPs). This work aimed to produce antibacterial nanocomposites using pectin and acoustic cavitation. The metal NPs (Au or Ag) were deposited using ultrasound (US, 21 kHz, 50 W) and compared with those achieved with mechanical stirring. The impact of the reducing agents (NaBH4, ascorbic acid) on the dispersion and morphology of the resulting NPs was also assessed. Characterization by diffuse reflectance (DR) UV-Vis-NIR spectroscopy and field emission scanning electron microscopy (FESEM) showed that the use of US improves the dispersion and decreases the size of both Au and Ag NPs. Moreover, with Au NPs, avoiding external reductants led to smaller NPs and more uniform in size. The prepared NPs were functionalized with oxytetracycline in water and tested against Escherichia coli (gram negative) and Staphylococcus epidermidis (gram positive) via the Kirby-Bauer test. The results show a better antibacterial activity of the functionalized nanoparticles compared to antibiotic-free NPs and pure oxytetracycline, advising the potential of the nanoparticles as drug carriers. These findings underscore the significance of US-assisted synthesis, paving the way to new environmentally friendly antimicrobial materials.

An Evaluation of the Effects of Pineapple-Extract and Bromelain-Based Treatment after Mandibular Third Molar Surgery: A Randomized Three-Arm Clinical Study.

A three-arm, randomized, placebo-controlled clinical study was conducted to assess the impact of lyophilized pineapple extract with titrated bromelain (Brome-Inf®) and purified bromelain on pain, swelling, trismus, and quality of life (QoL) following the surgical extraction of the mandibular third molars. Furthermore, this study examined the need for Non-Steroidal Anti-Inflammatory Drugs (NSAIDs) by comparing their effects with a placebo group. This study enrolled 42 individuals requiring the extraction of a single mandibular third molar under local anesthesia. The patients were randomly assigned to receive Brome-Inf®, purified bromelain, or a placebo orally, initiating treatment on the day of surgery and continuing for the next 7 days. The primary outcome measured was the requirement for NSAIDs in the three groups. Pain, swelling, and trismus were secondary outcome variables, evaluated postoperatively at 1, 3, and 7 days. This study also assessed the comparative efficacy of freeze-dried pineapple extract and single-component bromelain. Ultimately, the placebo group showed a statistically higher need for ibuprofen (from days 1 to 7) at the study's conclusion (p < 0.0001). In addition, reductions in pain and swelling were significantly higher in both the bromelain and pineapple groups (p < 0.0001 for almost all patients, at all intervals) than in the placebo group. The active groups also demonstrated a significant difference in QoL compared to the placebo group (p < 0.001). A non-significant reduction in trismus occurred in the treatment groups compared to the placebo group. Therefore, the administration of pineapple extract titrated in bromelain showed significant analgesic and anti-edema effects in addition to improving QoL in the postoperative period for patients who had undergone mandibular third molar surgery. Moreover, both bromelain and Brome-Inf® supplementation reduced the need for ibuprofen to comparable extents, proving that they are good alternatives to NSAIDs in making the postoperative course more comfortable for these patients. A further investigation with larger samples is necessary to assess the pain-relieving and anti-inflammatory impacts of the entire pineapple phytocomplex in surgical procedures aside from mandibular third molar surgery.

Semi-industrial ultrasound-assisted extraction of grape-seed proteins.

BACKGROUND: To manage industrial waste in accordance with the circular bioeconomy concept it is sometimes necessary to handle grape seeds, an abundant by-product of the wine-making process. This study presents a process based on ultrasound technology for the extraction of grape-seed proteins, due to their nutritional and techno-functional properties. The protein content of extracts obtained under silent and lab-scale conditions was compared with that obtained under semi-industrial ultrasound conditions, and the chemical composition (carbohydrates, total phenols, and lipids) and the elemental profiles of the final, up-scaled downstream extracts were characterized. RESULTS: This work found that the maximum amount of protein in the final product was 378.31 g.kg-1 of the extract. Chemical characterization revealed that each 1 kg of extract had an average content of 326.19 g gallic acid equivalent as total phenols, 162.57 g glucose equivalent as carbohydrates, and 382.76 g of lipophilic compounds. Furthermore, when the extract was checked for hazardous elements, none were found in levels that could be considered a risk for human health. CONCLUSION: The proposed semi-industrial strategy has the potential to contribute greatly to the valorization of grape seeds through the preparation of a protein-rich extract that can be used as an alternative to synthetic wine stabilizers and for the development of novel food and nutraceutical products. © 2024 Society of Chemical Industry.

Efficient Capture of Cannabis Terpenes in Olive Oil during Microwave-Assisted Cannabinoid Decarboxylation.

The development of selective extraction protocols for Cannabis-inflorescence constituents is still a significant challenge. The characteristic Cannabis fragrance can be mainly ascribed to monoterpenes, sesquiterpenes and oxygenated terpenoids. This work investigates the entrapment of Cannabis terpenes in olive oil from inflorescences via stripping under mild vacuum during the rapid microwave-assisted decarboxylation of cannabinoids (MW, 120 °C, 30 min) and after subsequent extraction of cannabinoids (60 and 100 °C). The profiles of the volatiles collected in the oil samples before and after the extraction step were evaluated using static headspace solid-phase microextraction (HS-SPME), followed by gas chromatography coupled to mass spectrometry (GC-MS). Between the three fractions obtained, the first shows the highest volatile content (~37,400 mg/kg oil), with α-pinene, ß-pinene, ß-myrcene, limonene and trans-ß-caryophyllene as the main components. The MW-assisted extraction at 60 and 100 °C of inflorescences using the collected oil fractions allowed an increase of 70% and 86% of total terpene content, respectively. Considering the initial terpene amount of 91,324.7 ± 2774.4 mg/kg dry inflorescences, the percentage of recovery after decarboxylation was close to 58% (mainly monoterpenes), while it reached nearly 100% (including sesquiterpenes) after extraction. The selective and efficient extraction of volatile compounds, while avoiding direct contact between the matrix and extraction solvents, paves the way for specific applications in various aromatic plants. In this context, aromatized extracts can be employed to create innovative Cannabis-based products within the hemp processing industry, as well as in perfumery, cosmetics, dietary supplements, food, and the pharmaceutical industry.

Integrated physicochemical processes to tackle high-COD wastewater from pharmaceutical industry.

Wastewater decontamination in pharmaceuticals is crucial to prevent environmental and health risks from API residues and other contaminants. Advanced oxidation processes (AOPs) combined with cavitational treatments offer effective solutions. Challenges include designing reactors on a large scale and monitoring the effectiveness and synergies of the hybrid technology. In the present work, pilot-scale treatment of a real high COD (485 g/L) pharmaceutical wastewater (PW) was investigated using hydrodynamic cavitation (HC) operated individually at 330 L/h or in combination with oxidants and electrical discharge (ED) with cold plasma (15 kV and 48 kHz). The first approach consisted of PW cavitational treatment alone of 7 L of 1:100 diluted PW at a HC-induced pressure of 60 bar and a flow rate of 330 L/h. However, this strategy did not provide satisfactory results for COD (∼15% less), and only when HC treatment was extended to more than 30 min in a recirculation mode, encouraging results were obtained (∼45% COD reduction). Consequently, a hybrid approach combining HC with ED-cold plasma was chosen to treat this high-COD PW. Aiming to establish an efficient flow-through hybrid process, after optimising all cavitation and electrical discharge parameters (45 bar HC pressure and 10 kHz ED frequency), the best COD abatement of ∼50 % was recorded with a 1:50 diluted PW. However, a subsequent adsorption step over activated carbon was required to achieve an almost quantitative COD reduction (95%+). Our integrated physicochemical process proved to be extremely efficient in treating high-COD industrial wastewater and resulted in a remarkable reduction of the COD value. In addition, the residual surfactants content in the PW were also drastically reduced (98%+) when a small amount of oxidants was added in the hybrid HC/ED treatment.

Coating of Filter Materials with CeO2 Nanoparticles Using a Combination of Aerodynamic Spraying and Suction.

Textiles and nonwovens (including those used in ventilation systems as filters) are currently one of the main sources of patient cross-infection. Healthcare-associated infections (HAIs) affect 5-10% of patients and stand as the tenth leading cause of death. Therefore, the development of new methods for creating functional nanostructured coatings with antibacterial and antiviral properties on the surfaces of textiles and nonwoven materials is crucial for modern medicine. Antimicrobial filter technology must be high-speed, low-energy and safe if its commercialization and mass adoption are to be successful. Cerium oxide nanoparticles can act as active components in these coatings due to their high antibacterial activity and low toxicity. This paper focuses on the elaboration of a high-throughput and resource-saving method for the deposition of cerium oxide nanoparticles onto nonwoven fibrous material for use in air-conditioning filters. The proposed spraying technique is based on the use of an aerodynamic emitter and simultaneous suction. Cerium oxide nanoparticles have successfully been deposited onto the filter materials used in air conditioning systems; the antibacterial activity of the ceria-modified filters exceeded 4.0.

Mechanochemical Degradation of Biopolymers.

Mechanochemical treatment of various organic molecules is an emerging technology of green processes in biofuel, fine chemicals, or food production. Many biopolymers are involved in isolating, derivating, or modifying molecules of natural origin. Mechanochemistry provides a powerful tool to achieve these goals, but the unintentional modification of biopolymers by mechanochemical manipulation is not always obvious or even detectable. Although modeling molecular changes caused by mechanical stresses in cavitation and grinding processes is feasible in small model compounds, simulation of extrusion processes primarily relies on phenomenological approaches that allow only tool- and material-specific conclusions. The development of analytical and computational techniques allows for the inline and real-time control of parameters in various mechanochemical processes. Using artificial intelligence to analyze process parameters and product characteristics can significantly improve production optimization. We aim to review the processes and consequences of possible chemical, physicochemical, and structural changes.

Ultrasonication for honey processing and preservation: A brief overview.

Honey is a food product consumed all over the world. Besides its nutritional properties, honey presents antibacterial, antioxidant, and wound-healing properties. To ensure that the final product meets qualitative and microbiological standards, honey treatment is of great importance. Conventional honey treatment is based on the heating of honey samples for decrystallization and bacteria and yeast inactivation. However, conventional heating can cause negative effects on honey quality, such as the formation of toxic compounds, reduction of enzyme activity, and loss of antioxidant and antimicrobial properties. The application of ultrasonic waves has demonstrated interesting effects on honey processing. Ultrasound (US) treatment can lead to the fragmentation of glucose crystals in crystalized honey and has little effect on its properties. In addition to inactivating microorganisms, US-assisted honey processing also preserves phenolic compounds content and antimicrobial properties. However, there is still limited information about honey sonication. The aim of the present review is to comprehensively show the possibilities of US application in honey processing and its effects on honey properties.

Unlocking the Bioactive Potential of Pomegranate Peels: A Green Extraction Approach.

Pomegranate (Punica granatum L.) is well known for its high content of bioactives, including polyphenols, flavonoids, and tannins, which have been shown to exhibit a wide range of biological activities, such as antioxidant, antimicrobial, and anticancer effects. It is worth noting that the majority of these molecules are found in the peels, which are usually disposed of after processing, causing a significant amount of waste, amounting to more than 3.6 million t/y. This work investigates microwave-assisted extraction (MAE) in water for the recovery of antioxidants from pomegranate peels (PP), including the optimisation of temperature and extraction times. The total phenolic, anthocyanin, flavonoid, and tannin contents of the recovered extracts were determined, as well as their antioxidant activities, which were found to be 356.35 mgGAE/gExtr, 303.97 µgCy3G/gExtr, 37.28 mgQE/gExtr, 56.48 mgGAE/gExtr, and 5.72 mmolTE/gExtr, respectively (according to the adopted reference). All results were compared with those obtained using a conventional protocol. In addition, the potential for water recycling by means of downstream nanofiltration in optimised MAE was investigated, leading to overall water reuse of approx. 75%. Power consumption (20.92 W/mgGAE) and common green metrics, Reaction Mass Efficiency (RME), E-Factor, and the Process Mass Intensiti/efficiency (PMI, PME), were considered in evaluating the proposed PP valorisation strategy. Finally, the biological activities of the main products were assessed. The antimicrobial properties of the PP extracts against three Gram-positive and three Gram-negative bacteria and their antiproliferative activity towards human cancer cells were tested. S. aureus bacteria was the most susceptible to the PP extracts. All tested products displayed antiproliferative activity against HeLa cells when higher concentrations were tested, with D-PP/NF (obtained from dried PP and sequential nanofiltration) being the most effective. This result was also confirmed via clonogenic analysis, which generally indicated the possible anti-cancer activity of pomegranate peel extracts obtained using this green approach.

Batch and Flow Green Microwave-Assisted Catalytic Conversion Of Levulinic Acid to Pyrrolidones.

This paper reports a new sustainable protocol for the microwave-assisted catalytic conversion of levulinic acid into N-substituted pyrrolidones over tailor-made mono (Pd, Au) or bimetallic (PdAu) catalysts supported on either highly mesoporous silica (HMS) or titania-doped HMS, exploiting the advantages of dielectric heating. MW-assisted reductive aminations of levulinic acid with several amines were first optimized in batch mode under hydrogen pressure (5 bar) in solvent-free conditions. Good-to-excellent yields were recorded at 150 °C in 90 min over the PdTiHMS and PdAuTiHMS, that proved recyclable and almost completely stable after six reaction cycles. Aiming to scale-up this protocol, a MW-assisted flow reactor was used in combination with different green solvents. Cyclopentyl methyl ether (CPME) provided a 99 % yield of N-(4-methoxyphenyl) pyrrolidin-2-one at 150 °C over PdTiHMS. The described MW-assisted flow synthesis proves to be a safe procedure suitable for further industrial applications, while averting the use of toxic organic solvents.

Combination modes impact on the stability of ß-carotene-loaded emulsion constructed by soy protein isolate, ß-glucan and myricetin ternary complex.

A ß-carotene rich emulsion with improved physical and chemical stability was obtained in this study, using different types of protein-polysaccharide-polyphenol ternary complexes as novel emulsifiers. The ternary complexes were prepared by covalent or non-covalent binding of soy protein isolate (SPI), ß-glucan (DG) and myricetin (MC), which were evidenced to be stable. It was indicated that the emulsion stabilized by covalent complex of SPI, DG and MC, exhibited higher zeta-potential and smaller particle size than those stabilized by non-covalent complex. Furthermore, the covalent complexes prepared from different addition sequences showed different efficiencies in stabilizing the emulsion, in which SPI-DG-MC and SPI-MC-DG-stabilized emulsions possess better stability, emulsifying activity and storage resistance under adverse environmental treatment, with CI values of 62.7% and 64.3% after 25 days, respectively. According to oxidative stability and rheology analysis of the emulsions, it was found that the SPI-MC-DG complex prepared at the ratio of 4:2:1 was more stable with relatively less lipid oxidation products and a tighter stacking structure, and the final LH value was 39.98 mmol/L and the MDA value was 6.34 mmol/L. These findings implied that the ternary complex has the potential to deliver fat-soluble active ingredient by means of emulsion, but which depends on the mode and sequence of the molecular interactions.

Sonolytic degradation kinetics and mechanisms of antibiotics in water and cow milk.

Antibiotics (ABX) residues frequently occurred in water and cow milk. This work aims to understand the kinetics and mechanisms of sonolytic degradation of four ABX, i.e. ceftiofur hydrochloride (CEF), sulfamonomethoxine sodium (SMM), marbofloxacin (MAR), and oxytetracycline (OTC) in water and milk. In both water and milk, the sonolytic degradation of ABX follows pseudo-first order (PFO) kinetics well (R2: 0.951-0.999), with significantly faster ABX degradation in water (PFO kinetics constants (k1): 1.5 × 10-3-1.2 × 10-1 min-1) than in milk (k1: 3.5 × 10-4-5.6 × 10-2 min-1). The k1 values for SMM degradation in water increased by 118% with ultrasonic frequency (40-120 kHz), 174% with ultrasonic frequency (80-500 kHz), 649% with ultrasonic power (73-259 W), 22% with bulk temperature (12-40℃), and by 68% with reaction volume (50-250 mL), respectively, in other things being equal. The relevant k1 values in milk increased by 326%, 231%, 122%, 10% as well as 82% with the above same effective factors, respectively. The oxidation by free radicals generated in situ dominates ABX degradation, and the hydrophobic CEF (54.0-971.7 nM min-1) and SMM (39.2-798.4 nM min-1) underwent faster degradation than the hydrophilic MAR (33.9-751.9 nM min-1) and OTC (33.8-545.3 nM min-1) in both water and milk. Adding an extra 0.5 mM H2O2 accelerated SMM degradation by 19% in water and 33% in milk. After 130-150 min sonication of 100 mL of 2.0 mg L-1 (6.62 µM) SMM in various milk with 500 kHz and 259 W, the residue concentrations (52.9-96.3 µg L-1) can meet the relevant maximum residue limit (100 µg L-1).

Food-Waste Valorisation: Synergistic Effects of Enabling Technologies and Eutectic Solvents on the Recovery of Bioactives from Violet Potato Peels.

The recovery of valuable bioactive compounds from the main underutilised by-products of the food industry is one of the greatest challenges to be addressed in circular economy. Potato peels are the largest waste generated during potato processing. However, they could be a potential source of valuable bioactive compounds, such as polyphenols, that can be reused as natural antioxidants. Currently, environmentally benign enabling technologies and new types of non-toxic organic solvents for the extraction of bioactive compounds may dramatically improve the sustainability of these processes. This paper focuses on the potential inherent in the valorisation of violet potato peels (VPPs) by recovering antioxidants using natural deep eutectic solvents (NaDES) under ultrasound (US)- and microwave (MW)-assisted extraction. Both the enabling technologies provided performances that were superior to those of conventional extractions in terms of antioxidant activity determined by the DPPH· (2,2-diphenyl-1-picrylhydrazyl) assay. In particular, the most promising approach using NaDES is proven to be the acoustic cavitation with a Trolox eq. of 1874.0 mmolTE/gExtr (40 °C, 500 W, 30 min), vs. the 510.1 mmolTE/gExtr of hydroalcoholic extraction (80 °C, 4 h). The shelf-life of both hydroalcoholic and NaDES-VPPs extracts have been assessed over a period of 24 months, and found that NaDES granted a 5.6-fold shelf-life extension. Finally, the antiproliferative activity of both hydroalcoholic and NaDES-VPPs extracts was evaluated in vitro using the MTS assay on human tumour Caco-2 cells and normal human keratinocyte cells (HaCaT). In particular, NaDES-VPPs extracts exhibited a significantly more pronounced antiproliferative activity compared to the ethanolic extracts without a noteworthy difference between effects on the two cell lines.

From Batch to the Semi-Continuous Flow Hydrogenation of pNB, pNZ-Protected Meropenem.

Meropenem is currently the most common carbapenem in clinical applications. Industrially, the final synthetic step is characterized by a heterogeneous catalytic hydrogenation in batch mode with hydrogen and Pd/C. The required high-quality standard is very difficult to meet and specific conditions are required to remove both protecting groups [i.e., p-nitrobenzyl (pNB) and p-nitrobenzyloxycarbonyl (pNZ)] simultaneously. The three-phase gas-liquid-solid system makes this step difficult and unsafe. The introduction of new technologies for small-molecule synthesis in recent years has opened up new landscapes in process chemistry. In this context, we have investigated meropenem hydrogenolysis using microwave (MW)-assisted flow chemistry for use as a new technology with industrial prospects. The reaction parameters (catalyst amount, T, P, residence time, flow rate) in the move from the batch process to semi-continuous flow were investigated under mild conditions to determine their influence on the reaction rate. The optimization of the residence time (840 s) and the number of cycles (4) allowed us to develop a novel protocol that halves the reaction time compared to batch production (14 min vs. 30 min) while maintaining the same product quality. The increase in productivity using this semi-continuous flow technique compensates for the slightly lower yield (70% vs. 74%) obtained in batch mode.

Short-Term Effect of Nutraceutical Fruit Juices on Lipid Metabolism in Patients with Acquired Hypercholesterolemia.

The crucial role of dyslipidaemia, especially hypercholesterolemia, in the development of atherosclerosis-related cardiovascular diseases has been extensively documented in genetic, pathologic, observational and intervention studies. The European guidelines for dyslipidaemia management include the possible use of lipid-lowering nutraceuticals to support a relatively large number of natural compounds. In this context, we have conducted a study to investigate whether dietary supplementation with a functional nutraceutical beverage, containing a standardized polyphenolic fraction from fruit, red yeast rice, phytosterols, and berberine complexed with ß-cyclodextrin, could positively affect serum lipid concentration in 14 subjects with hypercholesterolemia. After 12 weeks of treatment, dietary supplementation with this nutraceutical combination was associated with significant improvements in total cholesterol, low-density lipoprotein cholesterol, non-high-density lipoprotein cholesterol (non-HDL-C) and apolipoprotein B, compared to baseline. Compliance was excellent and no adverse effects were reported. In conclusion, this study demonstrates that 100 mL of a functional beverage containing lipid-lowering nutraceuticals safely leads to significant improvements in serum lipids in subjects with moderate hypercholesterolemia. Future research is needed to unravel the role that the polyphenols contained in fruit extracts play in the reduction of cholesterolemia and in cardiovascular disease prevention.

Simultaneous hydrodynamic cavitation and glow plasma discharge for the degradation of metronidazole in drinking water.

In this study, a novel hydrodynamic cavitation unit combined with a glow plasma discharge system (HC-GPD) was proposed for the degradation of pharmaceutical compounds in drinking water. Metronidazole (MNZ), a commonly used broad-spectrum antibiotic, was selected to demonstrate the potential of the proposed system. Cavitation bubbles generated by hydrodynamic cavitation (HC) can provide a pathway for charge conduction during glow plasma discharge (GPD). The synergistic effect between HC and GPD promotes the production of hydroxyl radicals, emission of UV light, and shock waves for MNZ degradation. Sonochemical dosimetry provided information on the enhanced formation of hydroxyl radicals during glow plasma discharge compared to hydrodynamic cavitation alone. Experimental results showed a MNZ degradation of 14% in 15 min for the HC alone (solution initially containing 300 × 10-6 mol L-1 MNZ). In experiments with the HC-GPD system, MNZ degradation of 90% in 15 min was detected. No significant differences were observed in MNZ degradation in acidic and alkaline solutions. MNZ degradation was also studied in the presence of inorganic anions. Experimental results showed that the system is suitable for the treatment of solutions with conductivity up to 1500 × 10-6 S cm-1. The results of sonochemical dosimetry showed the formation of oxidant species of 0.15 × 10-3 mol H2O2 L-1 in the HC system after 15 min. For the HC-GPD system, the concentration of oxidant species after 15 min reached 13 × 10-3 molH2O2L-1. Based on these results, the potential of combining HC and GPD systems for water treatment was demonstrated. The present work provided useful information on the synergistic effect between hydrodynamic cavitation and glow plasma discharge and their application for the degradation of antibiotics in drinking water.

Industrial Multiple-Effect Fractional Condensation under Vacuum for the Recovery of Hop Terpene Fractions in Water.

The inflorescences of Humulus lupulus L. are the most valuable ingredient in the brewing industry. Only female cones are used as their bitterness and aroma, much associated with beer, are granted by the production of resins and essential oils, respectively. The traditional brewing process for the extraction of the organic volatiles in hops is called dry hopping. It consists of extended maceration at low temperature after the fermentation phase. New extraction technologies can improve extraction rates and product quality while saving time and money. This article proves that multiple-effect fractional condensation under a vacuum is suitable for flavouring applications and especially for performing dry hopping without contamination risks and reductions in hop amounts. This technique leads to the recovery of aqueous aromatic fractions that are very rich in hop sesquiterpenes and monoterpenes. These suspensions are extremely stable when stored at 5-8 °C and avoid degradation even after several months. This feature is crucial for the marketing of non-alcoholic beverages, where the dilution of essential oils is otherwise problematic.