Interface Catalysis of Nickel Molybdenum (NiMo) Alloys on Two-Dimensional (2D) MXene for Enhanced Hydrogen Electrochemistry.

Development of efficient bifunctional nonprecious metallic electrocatalysts for hydrogen electrochemistry in alkaline solution is of importance to enable commercialization of a low-cost alkaline hydrogen fuel cell and water electrolyzer, but it is very challenging. Two-dimensional (2D) MXene-based electrocatalysts hold tremendous potential for the applications of hydrogen fuel cell and water electrolyzer. Here, we successfully immobilized transition-metal-based NiMo nanoparticles (NPs) on 2D Ti3C2Tx (Tx: surface terminations, such as O, OH, or F) surfaces by a wet chemical method. Our results demonstrate that the NiMo NPs are monodispersed on Ti3C2Tx with surface functionalization. These monodisperse NPs resulted in superior hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR) activities in an alkaline media. The NiMo NPs/Ti3C2Tx in 1.0 M KOH yielded an HER current of -10 mA cm-2 at -0.044 V vs reversible hydrogen electrode (RHE), nearly 232 mV smaller than that of the parent NiMo NPs. The NiMo NPs/Ti3C2Tx produced an HOR current density of 1.5 mA cm-2 at 0.1 V vs RHE. Density functional theory (DFT) results further reveal that Ti3C2Tx support can facilitate the charge transfer to metallic NPs and tailor the electronic structure of catalytic sites, resulting in optimized adsorption free energies of H* species for hydrogen electrochemistry. This work provides a facile and universal strategy in the development of 2D Ti3C2Tx with nonprecious metals for low-cost bifunctional hydrogen electrocatalysts.

Nucleophilic Polymers and Gels in Hydrolytic Degradation of Chemical Warfare Agents.

Water- and solvent-soluble polymeric materials based on polyalkylamines modified with nucleophilic groups are introduced as catalysts of chemical warfare agent (CWA) hydrolysis. A comparative study conducted at constant pH and based on the criteria of the synthetic route simplicity, aqueous solubility, and rate of hydrolysis of CWA mimic, diisopropylfluorophosphate (DFP), indicated that 4-aminopyridine-substituted polyallylamine (PAAm-APy) and polyvinylamine substituted with 4-aminopyridine (PVAm-APy) were advantageous over 4-pyridinealdoxime-modified PVAm and PAAm, poly(butadiene-co-pyrrolidinopyridine), and PAAm modified with bipyridine and its complex with Cu(II). The synthesis of PVAm-APy and PAAm-APy involved generation of a betaine derivative of acrylamide and its covalent attachment onto the polyalkylamine chain followed by basic hydrolysis. Hydrogel particles of PAAm-APy and PVAm-APy cross-linked by epichlorohydrin exhibited pH-dependent swelling and ionization patterns that affected the rate constants of DFP nucleophilic hydrolysis. Deprotonation of the aminopyridine and amine groups increased the rates of the nucleophilic hydrolysis. The second-order rate of nucleophilic hydrolysis was 5.5- to 10-fold higher with the nucleophile-modified gels compared to those obtained by cross-linking of unmodified PAAm, throughout the pH range. Testing of VX and soman (GD) was conducted in 2.5-3.7 wt % PVAm-APy suspensions or gels swollen in water or DMSO/water mixtures. The half-lives of GD in aqueous PVAm-APy were 12 and 770 min at pH 8.5 and 5, respectively. Addition of VX into 3.5-3.7 wt % suspensions of PVAm-APy in DMSO-d6 and D2O at initial VX concentration of 0.2 vol % resulted in 100% VX degradation in less than 20 min. The unmodified PVAm and PAAm were 2 orders of magnitude less active than PVAm-APy and PAAm-APy, with VX half-lives in the range of 24 h. Furthermore, the PVAm-APy and PAAm-APy gels facilitated the dehydrochlorination reaction of sulfur mustard (HD) and its analogue 2-chloroethyl ethylsulfide (CEES). The ability of the reported aminopyridine-modified polyalkylamine materials to degrade the most persistent of CWAs, coupled with aqueous solubility, and the presence of numerous amino groups that provide convenient "handles" for covalent attachment on polymeric and inorganic supports yields promise for applications such as protective fabric and textile treatment and components of decontaminating materials.

Lewis acid-assisted detection of nerve agents in water.

The five-coordinate compound, Salen((t)Bu)Al(Ac), prepared in situ from Salen((t)Bu)AlBr and NH4Ac, forms Lewis acid-base adducts in aqueous solution with the G-type nerve agents, Sarin and Soman, and the VX hydrolysis product, ethylmethylphosphonate (EMPA). The resulting compounds, [Salen((t)Bu)Al(NA)](+)[Ac] (-) (with NA = Sarin, Soman, and EMPA) are sufficiently stable to be identified by ESI-MS. Molecular ion peaks were detected for every compound with little or no fragmentation. The distinctive MS signatures for the [Salen((t)Bu)Al(NA)](+) compounds provide a new technique for identifying nerve agents from aqueous solution. The energetics of the displacement of Ac(-) by the nerve agents to form [Salen((t)Bu)Al(NA)](+)[Ac](-) were determined computationally.

Reaction of nerve agents with phosphate buffer at pH 7.

Chemical weapon nerve agents, including isopropyl methylphosphonofluoridate (GB or Sarin), pinacolyl methylphosphonofluoridate (GD or Soman), and S-(2-diisopropylaminoethyl) O-ethyl methylphosphonothioate (VX), are slow to react in aqueous solutions at midrange pH levels. The nerve agent reactivity increases in phosphate buffer at pH 7, relative to distilled water or acetate buffer. Reactions were studied using (31)P NMR. Phosphate causes faster reaction to the corresponding alkyl methylphosphonic acids, and produces a mixed phosphate/phosphonate compound as an intermediate reaction product. GB has the fastest reaction rate, with a bimolecular rate constant of 4.6 × 10(-3) M(-1)s(-1)[PO(4)(3-)]. The molar product branching ratio of GB acid to the pyro product (isopropyl methylphosphonate phosphate anhydride) is 1:1.4, independent of phosphate concentration, and the pyro product continues to react much slower to form GB acid. The pyro product has two doublets in the (31)P NMR spectrum. The rate of reaction for GD is slower than GB, with a rate constant of 1.26 × 10(-3) M(-1)s(-1) [PO(4)(3-)]. The rate for VX is considerably slower, with a rate constant of 1.39 × 10(-5) M(-1)s(-1) [PO(4)(3-)], about 2 orders of magnitude slower than the rate for GD. The rate constant of the reaction of GD with pyrophosphate at pH 8 is 2.04 × 10(-3) min(-1) at a concentration of 0.0145 M. The rate of reaction for diisopropyl fluorophosphate is 2.84 × 10(-3) min(-1) at a concentration of 0.153 M phosphate, a factor of 4 slower than GD and a factor of 15 slower than GB, and there is no detectable pyro product. The half-lives of secondary reaction of the GB pyro product in 0.153 and 0.046 M solution of phosphate are 23.8 and 28.0 h, respectively, which indicates little or no dependence on phosphate.

A decontamination system for chemical weapons agents using a liquid solution on a solid sorbent.

A decontamination system for chemical warfare agents was developed and tested that combines a liquid decontamination reagent solution with solid sorbent particles. The components have fewer safety and environmental concerns than traditional chlorine bleach-based products or highly caustic solutions. The liquid solution, based on Decon Greentrade mark, has hydrogen peroxide and a carbonate buffer as active ingredients. The best solid sorbents were found to be a copolymer of ethylene glycol dimethacrylate and n-lauryl methacrylate (Polytrap 6603 Adsorber); or an allyl methacrylate cross-linked polymer (Poly-Pore E200 Adsorber). These solids are human and environmentally friendly and are commonly used in cosmetics. The decontaminant system was tested for reactivity with pinacolyl methylphosphonofluoridate (Soman, GD), bis(2-chloroethyl)sulfide (Mustard, HD), and S-(2-diisopropylaminoethyl) O-ethyl methylphosphonothioate (VX) by using NMR Spectroscopy. Molybdate ion (MoO(4)(-2)) was added to the decontaminant to catalyze the oxidation of HD. The molybdate ion provided a color change from pink to white when the oxidizing capacity of the system was exhausted. The decontaminant was effective for ratios of agent to decontaminant of up to 1:50 for VX (t(1/2) < or = 4 min), 1:10 for HD (t(1/2) < 2 min with molybdate), and 1:10 for GD (t(1/2) < 2 min). The vapor concentrations of GD above the dry sorbent and the sorbent with decontamination solution were measured to show that the sorbent decreased the vapor concentration of GD. The E200 sorbent had the additional advantage of absorbing aqueous decontamination solution without the addition of an organic co-solvent such as isopropanol, but the rate depended strongly on mixing for HD.