A versatile oscillating-flow microfluidic PCR system utilizing a thermal gradient for nucleic acid analysis.

We report the development of a versatile system based on the oscillating-flow methodology in a thermal gradient system for nucleic acid analysis. Analysis of DNA and RNA samples were performed in the device, without additional temperature control and complexity. The technique reported in this study eliminates the need for predetermined fluidic channels for thermocycles, and complexity involved with additional incubation steps required for RNA amplification. A microfluidic device was fabricated using rapid prototyping by simply sandwiching dual side adhesive Kapton tape and a polydimethylsiloxane spacer between glass microscope slides. Amplification of the 181-bp segment of a viral phage DNA (ΦX174) and B2M gene in human RNA samples was demonstrated using the system. The developed system enables simultaneous acquisition of amplification and melt curves, eliminating the need for postprocessing. A direct comparison between the oscillating-flow system and a commercial real-time polymerase chain reaction (PCR) instrument showed complete agreement in PCR data and improved sample-to-result time by eliminating an additional 30 min melt curve step required in commercial PCR systems.

Lab-on-a-chip mRNA purification and reverse transcription via a solid-phase gene extraction technique.

Extraction and purification of high quality RNA is a crucial initial step required for a variety of genomic assays. We report a solid phase gene extraction (SPGE) method for automated extraction, purification and reverse transcription of mRNA in a microfluidic device. This is performed using a 130 µm diameter stainless steel needle that is amino-linked to dT(15) oligonucleotides for selective hybridization of mRNA. By inserting this probe into the biological sample for only 30 seconds, mRNA is captured with high selectivity and a yield greater than 10 pg per mm of probe length. The probe is then inserted into a lab-on-a-chip device, where the bound poly-adenylated RNA is thermally released and immediately reverse transcribed for subsequent PCR amplification. The insertion of the probe into the microfluidic device is straightforward: the microchannel is formed with an elastomer (PDMS) that, when punctured, will seal around the probe. The specificity and RNA loading capacity of the probes were evaluated using conventional qPCR. This procedure was successfully used to extract, purify, and transcribe mRNA from rat glioblastoma cell spheroids in less than seven minutes. Analysis of the product confirmed that the SPGE technique selectively captures and inherently purifies high-quality mRNA directly from biological material with no need for additional pre-processing steps. Integrating this elegant sample preparation method into a complete lab-on-a-chip system will substantially enhance the speed and automation of mRNA assays for research and clinical diagnostics.

Single-step intercalating dye strategies for DNA damage studies.

Many analytical protocols exist for the quantification of varied types of DNA damage, which span a range of complexity and sensitivity. As an alternative or companion to existing procedures, this article demonstrates the application of quantitative PCR (qPCR) and high-resolution DNA melting analysis (HRMA) to the detection and quantification of intramolecular DNA damage and/or strand breaks. These proven molecular biology methods are essentially single-step processes. When implemented with a third-generation saturating DNA dye, high sensitivity can be obtained. The experiments presented here demonstrate how DNA damage can inhibit amplification of the affected molecules. This corresponding decrease in the initial concentration of amplifiable DNA can be measured with qPCR. In addition, damage in the form of intramolecular dimerization and strand breaks alters the stored energy in the hydrogen bonds between the two strands in the dsDNA molecule. This significantly affects the thermal stability, which can be measured with extreme precision using HRMA. Simplified damage models were used in these experiments: UV-C irradiation to produce photoproducts, and restriction enzyme digestion to simulate double-strand breaks. The findings of this work, however, can be intuitively applied to the broad scope of DNA damage mechanisms.

Real-time damage monitoring of irradiated DNA.

This article presents a microfluidic technique for the real-time analysis of DNA damage due to radiation exposure. A continuous-flow spatial melting analysis was performed every three seconds on a sample of isolated DNA while it was being irradiated. The formation of photoproducts being caused by the UV-C radiation was monitored during the process. Cumulative damage produced distinct changes in the DNA melting curves, characterized by a shifting and broadening of the melting peaks. The design of the microfluidic device, the experimental procedure, and the analysis algorithm and interactive GUI are discussed herein. In addition, the advantages of this system are correlated to specific needs of related scientific studies, such as the investigation of sequence-specific damage susceptibility and the characterization of exposure-damage nonlinearities.

Glass-composite prototyping for flow PCR with in situ DNA analysis.

In this article, low cost microfluidic devices have been used for simultaneous amplification and analysis of DNA. Temperature gradient flow PCR was performed, during which the unique fluorescence signature of the amplifying product was determined. The devices were fabricated using xurography, a fast and highly flexible prototype manufacturing method. Each complete iterative design cycle, from concept to prototype, was completed in less than 1 h. The resulting devices were of a 96% glass composition, thereby possessing a high thermal stability during continuous-flow PCR. Volumetric flow rates up to 4 microl/min induced no measurable change in the temperature distribution within the microchannel. By incorporating a preliminary channel passivation protocol, even the first microliters through the system exhibited a high amplification efficiency, thereby demonstrating the biocompatibility of this fabrication technique for DNA amplification microfluidics. The serpentine microchannel induced 23 temperature gradient cycles in 15 min at a 2 microl/min flow rate. Fluorescent images of the device were acquired while and/or after the PCR mixture filled the microchannel. Because of the relatively high initial concentration of the phage DNA template (PhiX174), images taken after 10 min (less than 15 PCR cycles) could be used to positively identify the PCR product. A single fluorescent image of a full device provided the amplification curve for the entire reaction as well as multiple high resolution melting curves of the amplifying sample. In addition, the signal-to-noise ratio associated with the spatial fluorescence was characterized as a function of spatial redundancy and acquisition time.