Magnetic Properties and THz Emission from Co/CoO/Pt and Ni/NiO/Pt Trilayers.

THz radiation emitted by ferromagnetic/non-magnetic bilayers is a new emergent field in ultra-fast spin physics phenomena with a lot of potential for technological applications in the terahertz (THz) region of the electromagnetic spectrum. The role of antiferromagnetic layers in the THz emission process is being heavily investigated at the moment. In this work, we fabricate trilayers in the form of Co/CoO/Pt and Ni/NiO/Pt with the aim of studying the magnetic properties and probing the role of very thin antiferromagnetic interlayers like NiO and CoO in transporting ultrafast spin current. First, we reveal the static magnetic properties of the samples by using temperature-dependent Squid magnetometry and then we quantify the dynamic properties with the help of ferromagnetic resonance spectroscopy. We show magnetization reversal that has large exchange bias values and we extract enhanced damping values for the trilayers. THz time-domain spectroscopy examines the influence of the antiferromagnetic interlayer in the THz emission, showing that the NiO interlayer in particular is able to transport spin current.

Remarkable Magnetic Properties in a Mn73.6Ga26.4 Alloy Produced via Out-of-Equilibrium Method.

Rare-earth-free permanent magnets with the L10 phase are actively researched for their potential as a future class of magnetic materials, capable of operating at higher temperatures and in challenging corrosion environments such as renewable energy applications. Among these classes, MnGa shows potential, being cost effective and having interesting magnetic properties. A MnGa magnetic alloy, with composition Mn73.6Ga26.4 in atomic percent, was produced via the out-of-equilibrium method, and its structural and magnetic properties were assessed using X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED) and extended magnetic characterization. We show that the MnGa alloy submitted to thermal annealing in optimal conditions exhibits a two-phase microstructure, where small nanocrystals of tetragonal L10/D022 magnetic phase are embedded within a D019 MnGa matrix of a non-collinear antiferromagnetic nature. These co-existing, magnetically different phases produce an optimal set of promising magnetic properties, larger than the values reported in the literature for single-phase MnGa alloys and thin films. Such large values are explained by the exchange coupling between competing non-collinear magnetic sublattices of the D019 MnGa with the net moment of the small magnetic nanocrystals of tetragonal symmetry.

Therapeutic Plasma Exchange in Catastrophic Antiphospholipid Syndrome (CAPS): A Rare Case Report and Literature Review.

BACKGROUND/AIM: Catastrophic antiphospholipid syndrome (CAPS) may be the first manifestation ("de novo") of antiphospholipid syndrome (APS) or a complication in the clinical course of patients known to have this syndrome. Approximately 40% of patients had an associated autoimmune disease, mainly, systemic lupus erythematosus (SLE). The trigger can be one of the following: infections, surgical interventions, neoplasms, pregnancy, discontinuation of anticoagulant treatment, and others. CAPS is a medical emergency in which early identification and prompt initiation of aggressive therapy is extremely important. According to the Guidelines for the use of Therapeutic Apheresis in Clinical Practice developed by the American Society for Apheresis (ASFA), last updated in April 2023, in CAPS, the indication for therapeutic plasma exchange (TPE) is category I, grade 2C. CASE REPORT: We present a case of probable CAPS secondary to systemic lupus erythematosus (SLE) in an elderly patient in whom clinical and biological improvement was achieved through a multidisciplinary approach and prompt initiation of TPE. Because TPE is considered first-line therapy in CAPS, we initiated the procedure as soon as the attending rheumatologist raised this suspicion. Four plasmapheresis sessions were performed in the Intensive Care Unit. We used TPE by membrane filtration. Following the therapeutic intervention with TPE, corticotherapy (Solumedrol in puls-therapy), cyclophosphamide and anticoagulant treatment, the evolution was favourable, with clinical and biological improvement. CONCLUSION: The prompt initiation of TPE, because of the suspicion of CAPS, increases the chances of a favourable evolution.

Novel Rare Earth (RE)-Free Nanocomposite Magnets Derived from L10-Phase Systems.

In the quest for novel rare earth (RE)-free magnetic materials, which also exhibit other additional properties such as good corrosion resistance and potential to operate at higher temperatures, an alloy deriving from the binary FePt system, with Mo and B addition, has been synthesized for the first time, using the out-of-equilibrium method of rapid solidification form the melt. The alloy with the composition Fe49Pt26Mo2B23 has been subjected to thermal analysis through differential scanning calorimetry in order to detect the structural disorder - order phase transformation as well as to study the crystallization processes. For the stabilization of the formed hard magnetic phase, the sample has been annealed at 600 °C and further structurally and magnetically characterized by means of X-ray diffraction, transmission electron microscopy, 57Fe Mössbauer spectrometry as well as magnetometry experiments. It has been proven that after annealing at 600 °C the tetragonal hard magnetic L10 phase emerges via crystallization from a disordered cubic precursor and becomes the predominant phase in terms of relative abundance. Moreover, it has been revealed by quantitative analysis via Mössbauer spectroscopy that the annealed sample exhibits a complex phase structure, where the L10 hard magnetic phase is accompanied by few other soft magnetic phases, in minority abundance: the cubic A1, orthorhombic Fe2B and residual intergranular region. The magnetic parameters have been derived from 300 K hysteresis loops. It was shown that, contrary to the as-cast sample which behaves as a typical soft magnet, the annealed sample presents strong coercivity and high remanent magnetization, accompanied by a large saturation magnetization. These findings offers good insight into the potential developing of novel class of RE-free permanent magnets, based on Fe-Pt-Mo-B, where the magnetic performance emerges from the co-existence of hard and soft magnetic phases in controlled and tunable proportions, capable of finding good applicability in fields requiring good catalytic properties and strong corrosion resistance.

Temperature-Dependent Phase Evolution in FePt-Based Nanocomposite Multiple-Phased Magnetic Alloys.

A quaternary Fe-Pt-Nb-B alloy has been fabricated by the melt spinning method with the purpose of the formation of crystallographically coherent multiple magnetic phases, emerging from the same metastable precursor, as well as to investigate the phase interactions and the influence of their coupling on magnetic performances. For this purpose, extended structural and magnetic investigations were undertaken by making use of X-ray diffraction, transmission electron microscopy, and 57Fe Mössbauer spectroscopy, as well as magnetic measurements using SQUID magnetometry. It was documented that intermediate metastable phases formed during primary crystallization, in intermediate stages of annealing, and a growth-dominated mode was encountered for the secondary crystallization stage upon annealing at 700 °C and 800 °C where fcc Fe3Pt and fct Fe2B polycrystalline were formed. The Mössbauer investigations have documented rigorously the hyperfine parameters of each of the observed phases. The fcc A1 FePt phase was shown to exhibit a peculiar ferromagnetic transition, and this transition has been proven to occur gradually between 300 K and 77 K. The magnetic measurements allowed us to identify the annealing at 700 °C as optimal for obtaining good magnetic features. Coercive field dependence shows similarities to the random anisotropy model for samples annealed at 500 °C to 700 °C which are nanocrystalline. These results show good perspectives for use in applications where different magnetic states are required at different operating temperatures.

Microcrystallization Effects Induced by Laser Annealing in Cr-Al-C Ion-Beam-Sputtered Films.

The microcrystallization effects induced by the real-time laser annealing in Cr-Al-C ion-sputtered films with an off-stoichiometric composition are studied. The laser annealing has been performed during Raman experiments with tunable laser power densities. Morphostructural changes induced during laser annealing were investigated by scanning electron microscopy. It has been proven that real-time laser annealing in the high-laser-power-density mode promotes quite clearly the formation of nanograins through surface microcrystallization. Detailed Raman analysis allowed for the observation of the optical modes that unequivocally identifies the low-symmetry 211 MAX phase in both low- and high-power-density modes. Such findings confirming the microcrystallization as well as the stabilization of the grain boundaries by carbon nanoclustering are confirmed by X-ray diffraction results, where the single-phase hexagonal 211 was unequivocally proven to form in the high-laser-power-density mode. The microcrystallization via laser annealing was also found to be beneficial for the elastic behavior, as the hardness values between 16 and 26 GPa were found after laser annealing, accompanied by a significantly high Young's bulk modulus. Such large values, larger than those in bulk compounds, are explicable by the nanometric grain sizes accompanied by the increase of the grain boundary regions.

Morpho-Structural Investigations and Carbon Nanoclustering Effects in Cr-Al-C Intermetallic Alloys.

Intermetallic Cr-Al-C thin films from the 211 class of MAX phases were fabricated via ion beam deposition and structural investigations were undertaken to obtain information about morpho-structural effects propelled by carbon excess in the stoichiometry of the films. In order to promote the occurrence of the Cr2AlC MAX phase, the stoichiometric thin films were subsequently annealed at two temperature values: 650 °C and 700 °C in UHV conditions for 30 min. The morpho-structural effects in both as-deposited and annealed films were monitored using scanning electron microscopy, X-ray diffraction, and Raman spectroscopy. XRD analysis showed that the as-deposited sample was almost completely crystallized in the hexagonal Cr2AlC structure, with a remaining amorphous fraction of about 17%, most probably rich in carbon. Raman analysis allowed the identification of three spectral regions, two of them encompassing the Raman optical modes belonging to the Cr2AlC 211 MAX phase, while the third one gave strong evidence of highly intense and large D- and G-bands of carbon. Structural parameters such as the crystal lattice parameters as well as the volume of the crystal unit cell were found to decrease upon annealing; this decrease is attributed to the grain growth. The average crystallite dimension was proven to increase after annealing, while the lattice micro-strain lowered to approximately 63% in the annealed thin film compared to the as-deposited one. Well-formed and intense Raman peaks attributed to D- and G-bands of carbon were also observed and, corroborated with the structural data, seemed to indicate an overall increased level of crystal ordering as well as potential carbon nanoclustering after thermal treatments with thin Cr2AlC films. This observed phenomenon concords with previously documented reports on ab initio modelling of possible Cr2AlC structures with carbon excess.

Mathematical Modeling and Optimization of Lactobacillus Species Single and Co-Culture Fermentation Processes in Wheat and Soy Dough Mixtures.

To improve food production via fermentation with co-cultures of microorganisms (e.g., multiple lactic acid bacteria-LAB strains), one must fully understand their metabolism and interaction patterns in various conditions. For example, LAB can bring added quality to bread by releasing several bioactive compounds when adding soy flour to wheat flour, thus revealing the great potential for functional food development. In the present work, the fermentation of three soy and wheat flour mixtures is studied using single cultures and co-cultures of Lactobacillus plantarum and Lactobacillus casei. Bio-chemical processes often require a significant amount of time to obtain the optimal amount of final product; creating a mathematical model can gain important information and aids in the optimization of the process. Consequently, mathematical modeling is used to optimize the fermentation process by following these LAB's growth kinetics and viability. The present work uses both multiple regression and artificial neural networks (ANN) to obtain the necessary mathematical model, useful in both prediction and process optimization. The main objective is to find a model with optimal performances, evaluated using an ANOVA test. To validate each obtained model, the simulation results are compared with the experimental data.

The Effect of Convalescent Plasma in Patients With Covid-19 in Intensive Care Unit.

BACKGROUND/AIM: Convalescent plasma collected from COVID-19 survivors contains antibodies against receptor binding domains with potent antiviral activity. The use of this therapy for COVID-19 is still under investigation, as the pathophysiological and immunological mechanisms responsible for the evolution of the disease have not been fully identified. PATIENTS AND METHODS: In this retrospective observational study, we included all patients with a confirmed SARS-Cov-2 infection based on positive RT-PCR testing, who received convalescent plasma treatment in addition to standard therapy, between 17.05.2020 and 27.11.2020, following hospitalization in the Anaesthesia and Intensive Care Unit of the Sibiu County Emergency Clinical Hospital, Romania. RESULTS: Convalescent plasma therapy of patients with SARS-Cov-2 infection and severe forms of the disease (requiring only high-flow oxygen therapy or non-invasive ventilation) significantly improved inflammatory markers (CRP, fibrinogen) and ventilatory parameters (SaO2, paO2, paO2/FiO2) reducing the need of supplemental oxygen delivery (p<0.05). Other factors that had a significant influence on the outcome were age and comorbidity. CONCLUSION: Inflammatory markers and ventilatory parameters were significantly improved and the need of supplemental oxygen delivery was reduced in COVID-19 patients treated with convalescent plasma.

Silica Coating of Ferromagnetic Iron Oxide Magnetic Nanoparticles Significantly Enhances Their Hyperthermia Performances for Efficiently Inducing Cancer Cells Death In Vitro.

Increasing the biocompatibility, cellular uptake, and magnetic heating performance of ferromagnetic iron-oxide magnetic nanoparticles (F-MNPs) is clearly required to efficiently induce apoptosis of cancer cells by magnetic hyperthermia (MH). Thus, F-MNPs were coated with silica layers of different thicknesses via a reverse microemulsion method, and their morphological, structural, and magnetic properties were evaluated by multiple techniques. The presence of a SiO2 layer significantly increased the colloidal stability of F-MNPs, which also enhanced their heating performance in water with almost 1000 W/gFe as compared to bare F-MNPs. The silica-coated F-MNPs exhibited biocompatibility of up to 250 µg/cm2 as assessed by Alamar Blues and Neutral Red assays on two cancer cell lines and one normal cell line. The cancer cells were found to internalize a higher quantity of silica-coated F-MNPs, in large endosomes, dispersed in the cytoplasm or inside lysosomes, and hence were more sensitive to in vitro MH treatment compared to the normal ones. Cellular death of more than 50% of the malignant cells was reached starting at a dose of 31.25 µg/cm2 and an amplitude of alternating magnetic field of 30 kA/m at 355 kHz.

Thermal Stability, Blocking Regime and Superparamagnetic Behavior in Mn-Al-C Melt Spun Ribbons.

Alloys possessing nominal compositions Mn53Al45C2 and Mn52Al46C2 were prepared by the melt spinning method and were subjected to complex structural, morphological and magnetic investigations. As these alloys can exhibit tetragonal L10-type and τ phase, they have good potential as rare earth (RE)-free magnets. It is, therefore, important to monitor the ε-τ phase transformation and the stability and the magnetic features of the tetragonal phase in an entire temperature interval. By using synchrotron X-ray diffraction, it has been proven that the ε-τ phase transformation occurs gradually, with the τ phase becoming predominant only after 450 °C. Moreover, this phase has been proven to be quite stable without any grain growth even at the highest temperature investigated at 800 °C. Low temperature behavior was thoroughly investigated by using a complex combination of major and minor hysteresis loops combined with the zero field cooled-field cooled magnetization protocols (ZFC-FC). Two different regimes, blocking and superparamagnetic, were documented. A spin reorientation transition was proven to occur at 55 K while a maximum magnetization observed in ZFC-FC curves proved that at about 75 K, a transition from ferro to superparamagnetic state occurs. The existence of a blocking regime below 55 K that is characteristic to nanogranular systems with superparamagnetic behavior has shown further development towards obtaining RE-free magnets.

Chemical Composition, Diuretic, and Antityrosinase Activity of Traditionally Used Romanian Cerasorum stipites.

Cherry stems (CS) represent a by-product intensively used in Eastern European countries as a traditional remedy for urinary tract disorders. Ethnopharmacological evidences sustain the use of CS as aqueous preparations (infusion and decoction), but few data were previously reported about phytochemical profile and pharmacological potential of CS hydroalcoholic extracts. In this regard, we aimed to evaluate the phenolic profile, in vitro antioxidant and tyrosinase inhibitory potential, and in vivo diuretic activity of 70% hydroethanolic cherry stems extract and cherry stems decoction (CSD). LC-DAD-ESI/MSn analysis revealed the presence of flavonoid-type compounds as main constituents for both preparations, especially flavanones (naringenin glycosides). Antioxidant activity evaluated through DPPH, ABTS, and FRAP methods was superior for cherry stems extract, probably due to the presence of phenolic-derived compounds in higher amounts than CSD. On the other hand, tyrosinase inhibitory potential and diuretic effect exerted by CSD were stronger, highlighting that other types of hydrophilic secondary metabolites are responsible for this bioactivity. Overall, our findings indicate that CS preparations could be used as promising mild diuretic agents and encourage further investigations regarding the correlation between their chemical composition and bioactive potential.

Magnetism and ε-τ Phase Transformation in MnAl-Based Nanocomposite Magnets.

Melt spun ribbons of Mn53Al45C2 and Mn52Al46C2 have been synthesized by rapid quenching of the melt with the purpose of monitoring the ε-τ phase transformation to show technologically feasible ways to increase magnetic parameters and to illustrate the viability of these alloys as the next generation of rare earth (RE)-free magnets. By differential scanning calorimetry (DSC), activation energies and temperatures of onset of the ε-τ phase transformation were obtained. Structural analysis was performed using X-ray diffraction (XRD) and the resulting XRD patterns were quantitatively assessed using full profile Rietveld-type analysis. Appropriate annealing was performed in order to enable the ε-τ phase transformation. While hcp ε-phase was found to be predominant in the as-cast samples, after appropriate annealing, the tetragonal τ-phase, the one that furnishes the relevant magnetic response, was found to be predominant with an abundance of about 90%. The data suggested a mechanism of hcp ε-phase decomposition controlled by the segregation towards the interfacial regions, having the rate of transformation governed by antiphase boundary diffusion processes. Magnetic measurements of annealed sample Mn53Al45C2, consisting of predominant tetragonal τ-phase, showed high values of magnetization and increased coercivity, consistent with an energy product of about 10 MGOe, similar with previously reported magnetization measurements, providing further insight into the realization of future class of RE-free low-cost permanent magnets.

Partnering bevacizumab with irinotecan as first line-therapy of metastatic colorectal cancer improves progression free survival-A retrospective analysis.

Colorectal cancer remains one of the most frequent malignancies (third place at both genders) worldwide in the last decade, owing to significant changes in modern dietary habits. Approximately half of the patients develop metastases during the course of their disease. The available therapeutic armamentarium is constantly evolving, raising questions regarding the best approach for improving survival. Bevacizumab remains one of the most widely used therapies for treating metastatic colorectal cancer and can be used after progression. This study aimed to identify the best chemotherapy partner for bevacizumab after progression. We performed a retrospective analysis of patients with metastatic colorectal cancer who were treated with bevacizumab as first- and second-line chemotherapy. Data were collected for 151 patients, 40 of whom were treated with double-dose bevacizumab after the first progression. The two standard chemotherapy regimens combined with bevacizumab were FOLFIRI/CAPIRI and FOLFOX4/CAPEOX. The initiation of first-line treatment with irinotecan-based chemotherapy improved progression-free survival and time to treatment failure but not overall survival. After the first progression, retreatment with the same regimen as that used in the induction phase was the best approach for improving overall survival (median overall survival: 46.5 vs. 27.0 months for the same vs. switched strategy, respectively). No correlations were observed between the dose intensity of irinotecan, oxaliplatin, 5-fluorouracil, or bevacizumab and the overall survival, progression-free survival in the first-/second-line treatment, and time to treatment failure. Interaction between an irinotecan-based regimen as a second-line treatment and double-dose bevacizumab after progression was associated with an improved overall survival (p = 0.06). Initiating systemic treatment with an irinotecan-based regimen in combination with bevacizumab improved the progression-free survival in the first-line treatment and time to treatment failure. In terms of overall survival, bevacizumab treatment after the first progression is better partnered with the same regimen as that used in the induction phase.

Doubling the Dose of Bevacizumab Beyond Progression in Metastatic Colorectal Cancer-the Experience of a Tertiary Cancer Center.

Background: Colorectal cancer (CRC) is the third most common cancer in Europe, with an annual increase in incidence ranging between 0.4 and 3.6% in various countries. Although the development of CRC was extensively studied, limited number of new therapies were developed in the last few years. Bevacizumab is frequently used as first- and second-line therapy for management of metastatic CRC (mCRC). The aim of this study is to present our experience with using bevacizumab beyond disease progression at different dosage levels in mCRC patients, in terms of overall survival, progression-free survival, time to treatment failure, and toxicities. Methods: We performed a consecutive retrospective analysis of patients with confirmed mCRC who were treated with bevacizumab at "Prof Dr. Ion Chiricuta" Institute of Oncology, Cluj-Napoca, Romania. We included patients who had received bevacizumab as first- or second-line therapy and further stratified them according to the dose administered as a second-line (either standard dose of 5 mg/kg every 2 weeks or 7.5 mg/kg every 3 weeks, or double dose of 10 mg/kg every 2 weeks or 15 mg/kg every 3 weeks-depending on the classical chemotherapy partner). All patients had received bevacizumab beyond progression (BYP) which is defined as continuing bevacizumab administration through second-line treatment despite disease progression. In each group, we evaluated the prognostic factors that influenced survival and treatment outcome. Results: One hundred and fifty-one (151) patients were included in the study. Themedian age of patients receiving double dose bevacizumab (DDB) and standard dose bevacizumab (SDB) was 58 years (range 41-71) and 57 years (range 19-75), respectively. The median overall survival in the DDB group was 41 months (range 27-49) compared to 25 months (range 23-29) in the SDB group (p = 0.01 log-rank test). First-line oxaliplatin-based treatment was used more frequently regardless of group, while irinotecan-based more frequently used as a second-line treatment (p = 0.014). Both oxaliplatin- and irinotecan-based regimens were found to be suitable partners for BYP. Statistical analysis revealed that dose intensity, primary tumor location, and cumulative exposure to BYP had significant influence on survival. Conclusion: Doubling the dose of bevacizumab after first progression may improve survival in mCRC patients. Increasing bevacizumab dose intensity could override the prognostic impact of primary tumor location in patients receiving double the dose of bevacizumab after first disease progression.

3D Superparamagnetic Scaffolds for Bone Mineralization under Static Magnetic Field Stimulation.

We reported on three-dimensional (3D) superparamagnetic scaffolds that enhanced the mineralization of magnetic nanoparticle-free osteoblast cells. The scaffolds were fabricated with submicronic resolution by laser direct writing via two photons polymerization of Ormocore/magnetic nanoparticles (MNPs) composites and possessed complex and reproducible architectures. MNPs with a diameter of 4.9 ± 1.5 nm and saturation magnetization of 30 emu/g were added to Ormocore, in concentrations of 0, 2 and 4 mg/mL. The homogenous distribution and the concentration of the MNPs from the unpolymerized Ormocore/MNPs composite were preserved after the photopolymerization process. The MNPs in the scaffolds retained their superparamagnetic behavior. The specific magnetizations of the scaffolds with 2 and 4 mg/mL MNPs concentrations were of 14 emu/g and 17 emu/g, respectively. The MNPs reduced the shrinkage of the structures from 80.2 ± 5.3% for scaffolds without MNPs to 20.7 ± 4.7% for scaffolds with 4 mg/mL MNPs. Osteoblast cells seeded on scaffolds exposed to static magnetic field of 1.3 T deformed the regular architecture of the scaffolds and evoked faster mineralization in comparison to unstimulated samples. Scaffolds deformation and extracellular matrix mineralization under static magnetic field (SMF) exposure increased with increasing MNPs concentration. The results are discussed in the frame of gradient magnetic fields of ~3 × 10-4 T/m generated by MNPs over the cells bodies.

Gastric cancer: adjuvant chemotherapy versus chemoradiation. A clinical point of view.

Gastric cancer represents one of the most severe cancers with poor overall survival. Despite the availability of published data on the efficacy of adjuvant treatment, the actual percentage of treated patients remains low. The toxicity of radiotherapy or chemotherapy regimens differ and clinicians need accessible tools in order to better select candidates for adjuvant treatment. In this review, we present published data from clinical trials and cancer registries that might be useful for properly balancing the efficacy and toxicity of adjuvant treatment in gastric cancer patients who underwent surgery with curative intent.

The synthesis and antiproliferative activities of new arylidene-hydrazinyl-thiazole derivatives.

New and known arylidene-hydrazinyl-thiazole derivatives have been synthesized by a convenient Hantzsch condensation. All compounds were evaluated for their in vitro cytotoxicity on two carcinoma cell lines, MDA-MB231 and HeLa. Significant antiproliferative activity for 2-(2-benzyliden-hydrazinyl)-4-methylthiazole on both MDA-MB-231 (IC50: 3.92 µg/mL) and HeLa (IC50: 11.4 µg/mL) cell lines, and for 2-[2-(4-methoxybenzylidene) hydrazinyl]-4-phenylthiazole on HeLa (IC50: 11.1 µg/mL) cell line is reported. Electrophoresis experiments showed no plasmid DNA (pTZ57R) cleavage in the presence of the investigated thiazoles.

Synthesis and anti-inflammatory evaluation of some new acyl-hydrazones bearing 2-aryl-thiazole.

This work describes recent results from our research program aiming at the synthesis and evaluation of new compounds acting as potential anti-inflammatory drugs. A series of novel acyl-hydrazones bearing 2-aryl-thiazole moiety were synthesized by the condensation between derivatives of 4-[2-(4-methyl-2-phenyl-thiazole-5-yl)-2-oxo-ethoxy]-benzaldehyde and 2, 3 or 4-(2-aryl-thiazol-4-ylmethoxy)-benzaldehyde, respectively and different carboxylic acid hydrazides. The structures of newly synthesized compounds were established by the combined use of IR, (1)H NMR, mass spectral data and elemental analysis. These compounds were tested in vivo for their anti-inflammatory activity, in an acute experimental inflammation. The acute phase bone marrow response, phagocytes' activity and NO synthesis were evaluated. Compounds 10, 15, 17, 18 and 22 reduced the absolute leukocytes count due to the lower neutrophils percentage. Phagocitary index was decreased by all the compounds. Seven of them reduced the phagocitary activity. Five compounds inhibited NO synthesis, 3, 4, 16 and 22 stronger than Meloxicam, the anti-inflammatory reference drug.