Impact of alkaline-earth doping on electronic properties of the photovoltaic perovskite CsSnI3: insights from a DFT perspective.

The oxidation of Sn(II) to the more stable Sn(IV) degrades the photovoltaic perovskite material CsSnI3; however, this problem can be counteracted via alkaline-earth (AE) doping. In this work, the electronic properties of CsSn1-xAExI3, with x = 0 and 0.25, and AE = Mg and Ca, were investigated via Density Functional Theory. It is proven that the synthetic reactions of all these perovskites are thermodynamically viable. Besides, a slight strengthening in the metal-halide bonds is found in the Mg-doped perovskite; consequently, it exhibits the greatest bulk modulus. Nevertheless, the opposite occurrs with the Ca-doped perovskite, which has the smallest bulk modulus due to the weakening of its metal-halide bonds. The calculated bandgaps for CsSnI3, Mg-doped and Ca-doped perovskites are 1.11, 1.32 and 1.55 eV, respectively, remaining remarkably close to the best photovoltaic-performing value for single-junction solar cells of 1.34 eV. Nevertheless, an indirect bandgap was predicted under Mg-doping. These results support the possibility of implementing AE-doped perovskites as absorber materials in single-junction solar cells, which can deliver higher output voltages than that using CsSnI3. Finally, it was found that Sr or Ba doping could result in semiconductors with bandgaps close to 2.0 eV.

Effects of lithium on the electronic properties of porous Ge as anode material for batteries.

Recently, the need of improvement of energy storage has led to the development of Lithium batteries with porous materials as electrodes. Porous Germanium (pGe) has shown promise for the development of new generation Li-ion batteries due to its excellent electronic, and chemical properties, however, the effect of lithium in its properties has not been studied extensively. In this contribution, the effect of surface and interstitial Li on the electronic properties of pGe was studied using a first-principles density functional theory scheme. The porous structures were modeled by removing columns of atoms in the [001] direction and the surface dangling bonds were passivated with H atoms, and then replaced with Li atoms. Also, the effect of a single interstitial Li in the Ge was analyzed. The transition state and the diffusion barrier of the Li in the Ge structure were studied using a quadratic synchronous transit scheme.

Bidimensional perovskite systems for spintronic applications.

The half-metallic behavior of the perovskite Sr2FeMoO6 (SFMO) suggests that this material could be used in spintronic applications. Indeed, SFMO could be an attractive material for multiple applications due to the possibility that its electronic properties could be changed by modifying its spatial confinement or the relative contents of its constituent transition metals. However, there are no reports of theoretical studies on the properties of confined SFMOs with different transition metal contents. In this work, we studied the electronic properties of SFMO slabs using spin-polarized first-principles density functional theory along with the Hubbard-corrected local density approximation and a supercell scheme. We modeled three insulated SFMO slabs with Fe:Mo atomic ratios of 1:1, 1:0, and 0:1; all with free surfaces parallel to the (001) crystal plane. The results show that the half-metallicity of the SFMO is lost upon confinement and the material becomes a conductor, regardless of the ratio of Fe to Mo. It was also observed that the magnetic moment of the slab is strongly influenced by the oxygen atoms. These results could prove useful in attempts to apply SFMOs in fields other than spintronics. Graphical abstract Losing the metallic behaviour: density of states changes, around the Fermi level, due to the Fe/Mo ratio for bidimensional perovskite systems.

Band-gap engineering of halogenated silicon nanowires through molecular doping.

In this work, we address the effects of molecular doping on the electronic properties of fluorinated and chlorinated silicon nanowires (SiNWs), in comparison with those corresponding to hydrogen-passivated SiNWs. Adsorption of n-type dopant molecules on hydrogenated and halogenated SiNWs and their chemisorption energies, formation energies, and electronic band gap are studied by using density functional theory calculations. The results show that there are considerable charge transfers and strong covalent interactions between the dopant molecules and the SiNWs. Moreover, the results show that the energy band gap of SiNWs changes due to chemical surface doping and it can be further tuned by surface passivation. We conclude that a molecular based ex-situ doping, where molecules are adsorbed on the surface of the SiNW, can be an alternative path to conventional doping. Graphical abstract Molecular doping of halogenated silicon nanowires.

Computational modeling of the size effects on the optical vibrational modes of H-terminated Ge nanostructures.

The vibrational dispersion relations of porous germanium (pGe) and germanium nanowires (GeNWs) were calculated using the ab initio density functional perturbation theory with a generalized gradient approximation with norm-conserving pseudopotentials. Both pores and nanowires were modeled using the supercell technique. All of the surface dangling bonds were saturated with hydrogen atoms. To address the difference in the confinement between the pores and the nanowires, we calculated the vibrational density of states of the two materials. The results indicate that there is a slight shift in the highest optical mode of the Ge-Ge vibration interval in all of the nanostructures due to the phonon confinement effects. The GeNWs exhibit a reduced phonon confinement compared with the porous Ge due to the mixed Ge-dihydride vibrational modes around the maximum bulk Ge optical mode of approximately 300 cm⁻¹; however, the general effects of such confinements could still be noticed, such as the shift to lower frequencies of the highest optical mode belonging to the Ge vibrations.

Ab-initio study of anisotropic and chemical surface modifications of ß-SiC nanowires.

The electronic band structure and electronic density of states of cubic SiC nanowires (SiCNWs) in the directions [001], [111], and [112] were studied by means of Density Functional Theory (DFT) based on the generalized gradient approximation and the supercell technique. The surface dangling bonds were passivated using hydrogen (H) atoms and OH radicals in order to study the effects of this passivation on the electronic states of the SiCNWs. The calculations show a clear dependence of the electronic properties of the SiCNWs on the quantum confinement, orientation, and chemical passivation of the surface. In general, surface passivation with either H or OH radicals removes the dangling bond states from the band gap, and OH saturation appears to produce a smaller band gap than H passivation. An analysis of the atom-resolved density of states showed that there is substantial charge transfer between the Si and O atoms in the OH-terminated case, which reduces the band gap compared to the H-terminated case, in which charge transfer mainly occurs between the Si and C atoms.

Computational simulation of the effects of oxygen on the electronic states of hydrogenated 3C-porous SiC.

A computational study of the dependence of the electronic band structure and density of states on the chemical surface passivation of cubic porous silicon carbide (pSiC) was performed using ab initio density functional theory and the supercell method. The effects of the porosity and the surface chemistry composition on the energetic stability of pSiC were also investigated. The porous structures were modeled by removing atoms in the [001] direction to produce two different surface chemistries: one fully composed of silicon atoms and one composed of only carbon atoms. The changes in the electronic states of the porous structures as a function of the oxygen (O) content at the surface were studied. Specifically, the oxygen content was increased by replacing pairs of hydrogen (H) atoms on the pore surface with O atoms attached to the surface via either a double bond (X = O) or a bridge bond (X-O-X, X = Si or C). The calculations show that for the fully H-passivated surfaces, the forbidden energy band is larger for the C-rich phase than for the Si-rich phase. For the partially oxygenated Si-rich surfaces, the band gap behavior depends on the O bond type. The energy gap increases as the number of O atoms increases in the supercell if the O atoms are bridge-bonded, whereas the band gap energy does not exhibit a clear trend if O is double-bonded to the surface. In all cases, the gradual oxygenation decreases the band gap of the C-rich surface due to the presence of trap-like states.

Raman scattering by confined optical phonons in Si and Ge nanostructures.

A microscopic theory of the Raman scattering based on the local bond-polarizability model is presented and applied to the analysis of phonon confinement in porous silicon and porous germanium, as well as nanowire structures. Within the linear response approximation, the Raman shift intensity is calculated by means of the displacement-displacement Green's function and the Born model, including central and non-central interatomic forces. For the porous case, the supercell method is used and ordered pores are produced by removing columns of Si or Ge atoms from their crystalline structures. This microscopic theory predicts a remarkable shift of the highest-frequency of first-order Raman peaks towards lower energies, in comparison with the crystalline case. This shift is discussed within the quantum confinement framework and quantitatively compared with the experimental results obtained from porous silicon samples, which were produced by anodizing p--type (001)-oriented crystalline Si wafers in a hydrofluoric acid bath.

Molecular doping and subsurface dopant reactivation in si nanowires.

Impurity doping in semiconductor nanowires, while increasingly well understood, is not yet controllable at a satisfactory degree. The large surface-to-volume area of these systems, however, suggests that adsorption of the appropriate molecular complexes on the wire sidewalls could be a viable alternative to conventional impurity doping. We perform first-principles electronic structure calculations to assess the possibility of n- and p-type doping of Si nanowires by exposure to NH(3) and NO(2). Besides providing a full rationalization of the experimental results recently obtained in mesoporous Si, our calculations show that while NH(3) is a shallow donor, NO(2) yields p-doping only when passive surface segregated B atoms are present.