Reconstruction of oblique facial cleft deformity with adjacent flap and nasolabial flap: A case report.

INTRODUCTION AND IMPORTANCE: Oblique facial clefts are uncommon congenital facial deformities. Among them, Tessier No. 3 cleft is an even rare malformation. This study presents a reconstructive option and curative effect for oblique facial cleft deformity of Tessier No. 3. CASE PRESENTATION: A 10-year-old girl was admitted to our hospital with "congenital facial deformity of right nose and mid-face". The clinical diagnosis was "oblique facial cleft of Tessier classification No. 3", also known as "naso-orbital cleft". The cleft was surgically repaired with an adjacent flap and nasolabial flap. After surgery, the case underwent uneventful healing with a surviving flap, and the deformity was well repaired. At 3 months to 1 year of follow-up, the flap had a similar feature (color and texture) to the contralateral tissue. A good outcome was obtained with minimal scar and face deformity. CLINICAL DISCUSSION: Facial cleft is a clinical type of craniofacial cleft. The soft tissue feature of Tessier No. 3 cleft is that the fissure is located in the joint part of the middle nose, lateral nose, and maxillary process. The operation adopts the method of closing the fissure with soft tissue flap and pedicled flap transplantation is a priority method. In this clinical case, the patient with oblique facial cleft of Tessier classification No. 3 was repaired by the adjacent flap and nasolabial flap. CONCLUSION: The application of the adjacent flap and nasolabial flap is a viable option for the reconstruction of oblique facial cleft deformity of Tessier No. 3 in oral surgery.

Design and fabrication of silicone cleft lip simulation model for personalized surgical training.

PURPOSE OF THE STUDY: To elucidate the design and fabrication methodologies employed in creating a personalized cleft lip simulation model, primarily intended for enhancing surgical training and diverse applications. The study further sought to assess the viability of integrating this simulation model into undergraduate oral experiments and instructional settings. STUDY DESIGN: Facial data from individuals with cleft lip conditions were acquired using a scanner. Subsequent stages involved reverse engineering and the utilization of 3D printing technology to generate a cleft lip silicone simulation model. The molding process entailed injecting silicone into a polylactic acid mold. The study enrolled 53 undergraduate students majoring in dentistry, who were randomly assigned to either a control or experimental group. A dedicated instructor guided each group independently, employing a combination of multiple-choice tests and surveys to gauge real-time evaluations and discern inter-group disparities. RESULTS AND CONCLUSIONS: We successfully designed and produced a personalized cleft lip simulation model, demonstrating notable efficacy in the context of cleft lip experimental teaching. Statistical analysis revealed a significant difference (P < 0.05) in the scores of the experimental group students on multiple-choice questions pertaining to cleft lip surgical procedures. Survey outcomes indicated that the experimental group students exhibited higher confidence levels in cleft lip surgery, as reflected from their responses to relevant questions, compared to the traditional group students. These differences were statistically significant (P < 0.05). The simulation model developed in this study emerges as a reliable and cost-effective training and teaching tool for cleft lip surgery.

A New Surgical Assistance Aid for Mesiodens Extraction Based on the Ideal Approach.

BACKGROUND: To date, the classification of mesiodens has been based on the location, crown orientation, and morphology; however, there is no assistance aid focusing on choosing surgical approach. PURPOSE: This study aimed to introduce and evaluate a new surgical assistance aid for mesiodens extraction based on surgical approach. STUDY DESIGN, SETTING, SAMPLE: For the retrospective trial part of this study, case data from mesiodens patients who had surgery at the Affiliated Stomatological Hospital was collected, and a new surgical assistance aid was developed. A prospective randomized controlled trial was conducted on mesiodens patients who were seen in our department (patients with one mesiodens were included). PREDICTOR VARIABLE: The predictor variable was surgical approach either with or without the surgical assistance aid. Subjects were randomized to one of the two study groups. For subjects assigned to the group using the surgical assistance guide, the approach was selected according to the aid detailed in this study. For subjects assigned to the group without the surgical assistant aid, 2 residents chose an approach based on their judgment and review of relevant imaging and physical examination. MAIN OUTCOME VARIABLES: The preoperative evaluation time, operative time, and complications associated with surgery were recorded separately for the two groups. COVARIATES: The age and sex were also recorded. ANALYSES: Variables were analyzed using the independent t-test and χ2 test. The level of statistical significance is P < .05. RESULTS: In the retrospective trial part, a new surgical assistance aid for mesiodens extraction was developed based on the ideal surgical approach. In the prospective randomized controlled trial, the experimental group (n = 50) was statistically significant in preoperative evaluation time (4.51 ± 0.34 mins vs 5.43 ± 0.34 mins) and operative time (31.87 ± 5.57 mins vs 36.32 ± 5.28 mins) compared to the control group (n = 50) (P < .001). There was no significant intergroup difference in complications associated with surgery (P > .05). CONCLUSION AND RELEVANCE: The new surgical assistance aid developed in this study guides surgeons to ease the selection of surgical approaches and shorten the operative time.

Application of digital guide plate with drill-hole sharing technique in the mandible reconstruction.

Background/purpose: With the development of computer-assisted surgery, digital guide plate was widely used in vascularized bone flap grafts for mandibular reconstruction. The purpose of this study was to design and manufacture a digital guide plate with drill-hole sharing for mandibular reconstruction and assess for surgical accuracy. Materials and methods: 17 patients that required mandibular reconstruction using fibula free flap or iliac crest free flap were included in the study. The computed tomography (CT) data of the patient's mandible and pelvis or fibula were acquired preoperatively. A surgical simulation was then performed using computer-aided surgical simulation (CASS) technology based on above date, which allowed the design of two cutting guide and a repositioning guide for mandibular reconstruction. After surgery, the accuracy of reconstruction was evaluated by superimposing the postoperative image onto the preoperative image of mandible, recording the linear and angular deviation of landmarks, measuring the differences between the planned and actual outcomes. Results: The osteotomy and repositioning of fibula or iliac crest segments were successfully performed as planned using surgical guides. The digital guide plate with drill-hole sharing showed excellent accuracy, When the iliac crest or the fibula free flap were used for mandibular reconstruction, the largest mean differences between the preoperative and postoperative were 1.11 mm and 2.8° or 1.3 mm and 3.87°. Conclusion: The digital guide plate with drill-hole sharing designed preoperatively provides a reliable method of for the mandibular reconstruction. This can assist surgeons in accurately performing osteotomy and repositioning fibula or iliac crest segments during the mandibular reconstruction.

A study on the survival prediction for patients with oral cancer in southwest China.

OBJECTIVE: The prognostic value of the variables were evaluated in 418 postoperative oral cancer patients with oral cancer in southwest China between January 2013 and December 2020. Nomogram was developed based on the study, and its predictive performance and clinical utility were evaluated. RESULTS: The univariate analysis showed gender, preoperative fibrinogen, preoperative platelet-to-lymphocyte ratio (PLR), and preoperative neutrophil-to-lymphocyte ratio, flap repair of defect, functional neck dissection (FND), tumor differentiation, tumor, node, metastasis stage, lymph node metastasis, the maximum tumor diameter, and postoperative radiotherapy had a significant influence on the survival of patients with oral cancer in southwest China (p < 0.05).The multivariate analysis showed preoperative PLR value, FND, and tumor differentiation had significant influence on the prediction of survival (p < 0.05). However, smoking and drinking are not prognostic risk factors for oral cancer. The discriminant analysis showed 66.3% of the patients could be correctly predicted for postoperative survival, while both the C-index and decision curve analysis (DCA) showed this study may be taken as a reference for predicting the postoperative survival of patients with oral cancer. CONCLUSION: Preoperative PLR, FND, and tumor differentiation are independent prognostic factors for patients with oral cancer in southwest China. The results of this study have been visualized using a nomogram and a DCA.

Clinical Application of Individualized 3D-Printed Templates in the Treatment of Condylar Osteochondroma.

BACKGROUND: Osteochondroma (OC) is one of the most common benign tumors of the long bones, but it rarely occurs in the maxillofacial skeleton. However, mandibular condylar OC often leads to severe facial deformity in affected patients, including facial asymmetry, deviation of the chin, and malocclusion. This study aimed to explore the clinical application of individualized 3D-printed templates to accurately and effectively treat condylar OC. METHODS: A total of 8 patients with mandibular condylar OC were treated from July 2015 to August 2021. The enrolled patients (5 women and 3 men) had a median age of 27 years (range: 21-32 years). All patients exhibited symptoms of facial asymmetry and occlusal disorders preoperatively. The digital software used to virtually design the process consisted of three-dimensional reconstruction, 3D-cephalometry analysis, virtual surgery, individualized templates, and postoperative facial soft-tissue prediction. A set of 3D-printed templates (DOS and DOT) were used in all cases to stabilize the occlusion and guide the osteotomy. Then, pre- and post-operative complications, mouth opening, clinical signs, and the accuracy of the CT imaging analysis were all evaluated. All the measurement data were presented as means ± SD; Bonferroni and Tamhane T2 multiple comparison tests were used to examine the differences between the groups. RESULTS: All patients healed uneventfully. None of the patients exhibited facial nerve injury at follow-up. In comparing the condylar segments with T0p and T1, the average deviation of the condylar segments was 0.5796 mm, indicating that the post-operative reconstructed condyles showed a high degree of similarity to the reconstruction results of the virtual surgical plan. CONCLUSIONS: Individualized 3D-printed templates simplified surgical procedures and improved surgical accuracy, proving to be an effective method for the treatment of patients with slight asymmetric deformities secondary to condylar OC.

Guided bone regeneration with extracellular matrix scaffold of small intestinal submucosa membrane.

Guided bone regeneration (GBR) is a promising strategy for repairing bone defects using bioactive membranes. In this study, a new type of GBR membrane based on the small intestinal submucosa (SIS) was created, and its surface structure, cytological characteristics, and bone defect repair ability were compared with commonly used membranes. Our results show that compared to the Heal-all and Dentium membranes, the SIS membrane has an asymmetric structure that does not affect the proliferation of bone marrow mesenchymal stem cells (BMSCs). Instead, it increased their formation of calcium nodules and expression of bone morphogenetic protein-2 (BMP-2), alkaline phosphatase (ALP), runt-related transcription factor 2 (Runx2), and osteopontin (OPN). Six weeks after their insertion into a rat calvarial defect model, increased bone growth was observed in the SIS membrane group. Our results indicate that the SIS membrane has good biocompatibility and is more effective in promoting early bone formation than existing membranes. Given the wide range of source materials and simple preparation processes available, SIS membrane is a promising candidate for guided bone regeneration.

Application of digital guide plate based on drill-hole sharing in oral and maxillofacial surgery.

OBJECTIVES: This study aimed to investigate the application of digital guide plate based on the drill-hole sharing concept in orthognathic surgery and mandibular reconstruction. METHODS: Sixteen patients with maxillofacial deformity requiring orthognathic surgery and 10 patients requiring mandibular reconstruction were selected as the research objects. Patients with maxillofacial deformity were scanned by computed tomography (CT), gypsum mold of the maxilla and mandibular arch were scanned using a laser surface scanner, and the fibula or iliac bone of the patients who needed mandibular reconstruction were scanned by CT to create a 3D model. The osteotomy and repositioning guides based on the drill-hole sharing concept were manufactured by digital technology. The guide plate was used to guide osteotomy and reposition the bone segment. Postoperative CT scan was performed. The displacement error of the bone segment was compared between the preoperative virtual surgery and the actual surgery to evaluate the accuracy of the guide plate, by measuring the distance between the landmarks and three reference planes and the distance between the two landmarks. RESULTS: The wounds healed well in all patients, and no serious complications were observed. The maximum mean values of LeFort Ⅰ osteotomy, genioplasty, fibular reconstruction, and iliac reconstruction were 0.84, 0.64, 1.27, and 1.18 mm, respectively; these values were acceptable by clinical standards. CONCLUSIONS: The digital guide plate based on the drill-hole sharing concept has high accuracy and clinical application value in orthognathic surgery and mandibular reconstruction.

Design and manufacture of dental-supported surgical guide for genioplasty.

BACKGROUND/PURPOSE: Genioplasty were used widely to correct chin deformities. The purpose of this study was to design and manufacture a dental-supported surgical guide for genioplasty surgery and assess for surgical accuracy. MATERIALS AND METHODS: eleven patients with chin deformities were treated in this study. The computed tomography (CT) data of the patient's skull and the digital dental models of stone dental models were acquired preoperatively. For each patient, a virtual three-dimensional (3D) model of the skull was constructed and enhanced with digital dental models. A surgical simulation was then performed using computer-aided surgical simulation (CASS) technology based on clinical examination and 3D cephalometry. The surgery was simulated preoperatively which allowed the design of a cutting guide and a dental-supported repositioning guide for genioplasty, which was then 3D-printed and used during operation after disinfection. After surgery, the outcome was evaluated by superimposing the postoperative CT model onto the preoperative model, recording the linear and angular deviation of landmarks and plane, then measuring the differences between the planned and actual outcomes. RESULTS: The osteotomy and repositioning were successfully performed as planned using surgical guides. No inferior alveolar nerve damage was seen in this study. The dental-supported surgical guide showed excellent accuracy, with the largest differences between the planned and the postoperative chin segment being 0.9 mm and 3.2°. CONCLUSION: The dental-supported surgical guide designed preoperatively provided a reliable method of transfer genioplasty planning. This can assist surgeons in accurately performing osteotomy and repositioning bone segments during a genioplasty.

[Survey and analysis of tooth extraction anxiety of dental patients].

OBJECTIVE: This study aims to understand the current status and analyze the influencing factors of tooth extraction anxiety of dental patients. METHODS: The General Factor Questionnaire and Modified Dental Anxiety Scale (MDAS) were used to survey and analyze tooth extraction anxiety of 800 dental patients. Single-factor and multi-factor analyses were used for statistical data analysis. RESULTS: A total of 768 qualified questionnaires were received out of 800, the efficiency was 96%. The mean MDAS score was 10.21±3.29. The prevalence percentage of dental anxiety was 14.7%. Significant statistical differences of the incidence of dental anxiety were observed with regard to sex, age, tooth extraction time, accompanying relatives and friends, before tooth extraction, tooth extraction experience for family and friends, pain tolerance, mental health state before tooth extraction, and self-reported oral health status (P<0.05. By contrast, no significant statistical differences in the incidence of dental anxiety were observed with regard to educational level, tooth extraction type, national life experience, profession, and personality (P>0.05). Logistic regression analysis indicated that the risk factors of dental anxiety were sex, accompanying relatives and friends, mental health state before tooth extraction, and self-rated oral health status. CONCLUSIONS: The prevalence percentage of tooth extraction anxiety is high for dental patients. Gender, age, health satisfaction, tooth extraction time, accompanying relatives and friends, before tooth extraction, tooth extraction experience for family and friends, pain tolerance, mental health state before tooth extraction, and self-reported oral health status are the influencing factors of dental anxiety.