Additively manufactured electrodes for plasma and power-flow studies in high-power transmission lines on the 1-MA MAIZE facility.

Power-flow studies on the 30-MA, 100-ns Z facility at Sandia National Laboratories have shown that plasmas in the facility's magnetically insulated transmission lines (MITLs) and double post-hole convolute can result in a loss of current delivered to the load. To study power-flow physics on the 1-MA, 100-ns MAIZE facility at the University of Michigan, planar MITL loads and planar post-hole convolute loads have been developed that extend into the lines of sight for various imaging diagnostics on MAIZE. These loads use 3D-printed dielectric support structures lined with thin foils of either aluminum or stainless steel. The metal foils serve as the current-carrying power-flow surfaces, which generate plasma during the current pulse. The foil thickness (50 µm) and widths (11.5-16 mm) are selected to ensure a sufficient linear current density (0.5-0.7 MA/cm) for plasma formation. Laser backlighting (532 nm) and visible-light self-emission imaging capture the overall plasma evolution in the anode-cathode gaps, including the gap closure velocities (1-4 cm/µs).

Zeeman spectroscopy as a method for determining the magnetic field distribution in self-magnetic-pinch diodes (invited).

In the self-magnetic-pinch diode, the electron beam, produced through explosive field emission, focuses on the anode surface due to its own magnetic field. This process results in dense plasma formation on the anode surface, consisting primarily of hydrocarbons. Direct measurements of the beam's current profile are necessary in order to understand the pinch dynamics and to determine x-ray source sizes, which should be minimized in radiographic applications. In this paper, the analysis of the C IV doublet (580.1 and 581.2 nm) line shapes will be discussed. The technique yields estimates of the electron density and electron temperature profiles, and the method can be highly beneficial in providing the current density distribution in such diodes.

Body mass index and human sperm quality: neither one extreme nor the other.

The aim of the present study was to investigate the still contentious association between body mass index (BMI) and seminal quality. To this end, 4860 male patients (aged 18-65 years; non-smokers and non-drinkers), were classified according to BMI as either underweight (UW; BMI <20kgm-2; n=45), normal weight (NW; BMI 20-24.9kgm-2; n=1330), overweight (OW; BMI 25-29.9kgm-2; n=2493), obese (OB; BMI 30-39.9kgm-2; n=926) or morbidly obese (MOB; BMI ≥40kgm-2; n=57). Conventional semen parameters and seminal concentrations of fructose, citric acid and neutral α-glucosidase (NAG) were evaluated. The four parameters that reflect epididymal maturation were significantly lower in the UW and MOB groups compared with NW, OW and OB groups: sperm concentration, total sperm count (103.3±11.4 and 121.5±20.6 and vs 157.9±3.6, 152.4±2.7 or 142.1±4.3 spermatozoa ejaculate-1 respectively, P<0.05), motility (41.8±2.5 and 42.6±2.6 vs 47.8±0.5, 48.0±0.4 or 46.3±0.6 % of motile spermatozoa respectively, P<0.05) and NAG (45.2±6.6 and 60.1±7.9 vs 71.5±1.9, 64.7±1.3 or 63.1±2.1 mU ejaculate-1 respectively, P<0.05). Moreover, the percentage of morphologically normal spermatozoa was decreased in the MOB group compared with the UW, NW, OW and OB groups (4.8±0.6% vs 6.0±0.8%, 6.9±0.1%, 6.8±0.1 and 6.4±0.2%, respectively; P<0.05). In addition, men in the MOB group had an increased risk (2.3- to 4.9-fold greater) of suffering oligospermia and teratospermia (P<0.05). Both morbid obesity and being underweight have a negative effect on sperm quality, particularly epididymal maturation. These results show the importance of an adequate or normal bodyweight as the natural best option for fertility, with both extremes of the BMI scale as negative prognostic factors.

Optimization of current waveform tailoring for magnetically driven isentropic compression experiments.

The Thor pulsed power generator is being developed at Sandia National Laboratories. The design consists of up to 288 decoupled and transit time isolated capacitor-switch units, called "bricks," that can be individually triggered to achieve a high degree of pulse tailoring for magnetically driven isentropic compression experiments (ICE) [D. B. Reisman et al., Phys. Rev. Spec. Top.-Accel. Beams 18, 090401 (2015)]. The connecting transmission lines are impedance matched to the bricks, allowing the capacitor energy to be efficiently delivered to an ICE strip-line load with peak pressures of over 100 GPa. Thor will drive experiments to explore equation of state, material strength, and phase transition properties of a wide variety of materials. We present an optimization process for producing tailored current pulses, a requirement for many material studies, on the Thor generator. This technique, which is unique to the novel "current-adder" architecture used by Thor, entirely avoids the iterative use of complex circuit models to converge to the desired electrical pulse. We begin with magnetohydrodynamic simulations for a given material to determine its time dependent pressure and thus the desired strip-line load current and voltage. Because the bricks are connected to a central power flow section through transit-time isolated coaxial cables of constant impedance, the brick forward-going pulses are independent of each other. We observe that the desired equivalent forward-going current driving the pulse must be equal to the sum of the individual brick forward-going currents. We find a set of optimal brick delay times by requiring that the L2 norm of the difference between the brick-sum current and the desired forward-going current be a minimum. We describe the optimization procedure for the Thor design and show results for various materials of interest.

Experimental demonstration of fusion-relevant conditions in magnetized liner inertial fusion.

This Letter presents results from the first fully integrated experiments testing the magnetized liner inertial fusion concept [S. A. Slutz et al., Phys. Plasmas 17, 056303 (2010)], in which a cylinder of deuterium gas with a preimposed 10 Taxial magnetic field is heated by Z beamlet, a 2.5 kJ, 1 TW laser, and magnetically imploded by a 19 MA, 100 ns rise time current on the Z facility. Despite a predicted peak implosion velocity of only 70 km = s, the fuel reaches a stagnation temperature of approximately 3 keV, with T(e) ≈ T(i), and produces up to 2 x 10(12) thermonuclear deuterium-deuterium neutrons. X-ray emission indicates a hot fuel region with full width at half maximum ranging from 60 to 120 µm over a 6 mm height and lasting approximately 2 ns. Greater than 10(10) secondary deuterium-tritium neutrons were observed, indicating significant fuel magnetization given that the estimated radial areal density of the plasma is only 2 mg = cm(2).

Understanding fuel magnetization and mix using secondary nuclear reactions in magneto-inertial fusion.

Magnetizing the fuel in inertial confinement fusion relaxes ignition requirements by reducing thermal conductivity and changing the physics of burn product confinement. Diagnosing the level of fuel magnetization during burn is critical to understanding target performance in magneto-inertial fusion (MIF) implosions. In pure deuterium fusion plasma, 1.01 MeV tritons are emitted during deuterium-deuterium fusion and can undergo secondary deuterium-tritium reactions before exiting the fuel. Increasing the fuel magnetization elongates the path lengths through the fuel of some of the tritons, enhancing their probability of reaction. Based on this feature, a method to diagnose fuel magnetization using the ratio of overall deuterium-tritium to deuterium-deuterium neutron yields is developed. Analysis of anisotropies in the secondary neutron energy spectra further constrain the measurement. Secondary reactions also are shown to provide an upper bound for the volumetric fuel-pusher mix in MIF. The analysis is applied to recent MIF experiments [M. R. Gomez et al., Phys. Rev. Lett. 113, 155003 (2014)] on the Z Pulsed Power Facility, indicating that significant magnetic confinement of charged burn products was achieved and suggesting a relatively low-mix environment. Both of these are essential features of future ignition-scale MIF designs.

X-ray power and yield measurements at the refurbished Z machine.

Advancements have been made in the diagnostic techniques to measure accurately the total radiated x-ray yield and power from z-pinch implosion experiments at the Z machine with high accuracy. The Z machine is capable of outputting 2 MJ and 330 TW of x-ray yield and power, and accurately measuring these quantities is imperative. We will describe work over the past several years which include the development of new diagnostics, improvements to existing diagnostics, and implementation of automated data analysis routines. A set of experiments on the Z machine were conducted in which the load and machine configuration were held constant. During this shot series, it was observed that the total z-pinch x-ray emission power determined from the two common techniques for inferring the x-ray power, a Kimfol filtered x-ray diode diagnostic and the total power and energy diagnostic, gave 449 TW and 323 TW, respectively. Our analysis shows the latter to be the more accurate interpretation. More broadly, the comparison demonstrates the necessity to consider spectral response and field of view when inferring x-ray powers from z-pinch sources.

Seasonal evaluations of urinary androgen metabolites and semen quality in domestic long-tailed chinchilla (Chinchilla lanigera) under natural photoperiod.

Chinchilla spp. is a South American hystricomorph rodent genus currently considered almost extinct in the wild. The high quality of chinchilla fur motivated the harvesting of chinchillas for the fur market. Reproductive biology advances come from studies on commercially exploited animals, especially Chinchilla lanigera. We studied seasonal variation of urinary androgen metabolites, sperm concentration and sperm functional activity in males of domestic Chinchilla lanigera under natural photoperiod. In Córdoba city (31° S-64° W; Argentina), within the same latitudes as those of the historic Andean distribution (tropical deserts; 15°-34° S), domestic males (n=7) were studied in May (autumn), August (winter), November (spring), and February (summer). Urine was seasonally collected (over 24h; once for season, 4 in total) to measure urinary androgen metabolites (RIA), before semen collection by electroejaculation. The results indicated that although testicular volume (relative to body weight) and values of sperm functional activity did not show seasonal changes, a seasonal variation in androgen excretion was detected, with the highest values occurring during "short" light/dark cycles (autumn-winter). In addition, viable spermatozoa with intact acrosome mean values during winter-spring were higher than in autumn or summer. This study provides information that might contribute to the assessment of testicular activity in male chinchilla subjected to genetic selection in the fur industry. In addition, since domestic chinchilla still share some genomic characteristics with their counterparts in the wild, results presented may alsocontribute to ex situ breeding program of endangered chinchilla. In conclusion, natural photoperiod cycle affects testicular activity in domestic chinchilla.

Compact hohlraum configuration with parallel planar-wire-array x-ray sources at the 1.7-MA Zebra generator.

A compact Z-pinch x-ray hohlraum design with parallel-driven x-ray sources is experimentally demonstrated in a configuration with a central target and tailored shine shields at a 1.7-MA Zebra generator. Driving in parallel two magnetically decoupled compact double-planar-wire Z pinches has demonstrated the generation of synchronized x-ray bursts that correlated well in time with x-ray emission from a central reemission target. Good agreement between simulated and measured hohlraum radiation temperature of the central target is shown. The advantages of compact hohlraum design applications for multi-MA facilities are discussed.

Pulsed-coil magnet systems for applying uniform 10-30 T fields to centimeter-scale targets on Sandia's Z facility.

Sandia has successfully integrated the capability to apply uniform, high magnetic fields (10-30 T) to high energy density experiments on the Z facility. This system uses an 8-mF, 15-kV capacitor bank to drive large-bore (5 cm diameter), high-inductance (1-3 mH) multi-turn, multi-layer electromagnets that slowly magnetize the conductive targets used on Z over several milliseconds (time to peak field of 2-7 ms). This system was commissioned in February 2013 and has been used successfully to magnetize more than 30 experiments up to 10 T that have produced exciting and surprising physics results. These experiments used split-magnet topologies to maintain diagnostic lines of sight to the target. We describe the design, integration, and operation of the pulsed coil system into the challenging and harsh environment of the Z Machine. We also describe our plans and designs for achieving fields up to 20 T with a reduced-gap split-magnet configuration, and up to 30 T with a solid magnet configuration in pursuit of the Magnetized Liner Inertial Fusion concept.

Pressure and energy balance of stagnating plasmas in z-pinch experiments: implications to current flow at stagnation.

Detailed spectroscopic diagnostics of the stagnating plasma in two disparate z pinches allow, for the first time, the examination of the plasma properties within a 1D shock wave picture, demonstrating a good agreement with this picture. The conclusion is that for a wide range of imploding-plasma masses and current amplitudes, in experiments optimizing non-Planckian hard radiation yields, contrary to previous descriptions the stagnating plasma pressure is balanced by the implosion pressure, and the radiation energy is provided by the imploding-plasma kinetic energy, rather than by the magnetic-field pressure and magnetic-field-energy dissipation, respectively.

Architecture, implementation, and testing of a multiple-shell gas injection system for high current implosions on the Z accelerator.

Tests are ongoing to conduct ~20 MA z-pinch implosions on the Z accelerator at Sandia National Laboratory using Ar, Kr, and D2 gas puffs as the imploding loads. The relatively high cost of operations on a machine of this scale imposes stringent requirements on the functionality, reliability, and safety of gas puff hardware. Here we describe the development of a prototype gas puff system including the multiple-shell nozzles, electromagnetic drivers for each nozzle's valve, a UV pre-ionizer, and an inductive isolator to isolate the ~2.4 MV machine voltage pulse present at the gas load from the necessary electrical and fluid connections made to the puff system from outside the Z vacuum chamber. This paper shows how the assembly couples to the overall Z system and presents data taken to validate the functionality of the overall system.

Observations of modified three-dimensional instability structure for imploding z-pinch liners that are premagnetized with an axial field.

Novel experimental data are reported that reveal helical instability formation on imploding z-pinch liners that are premagnetized with an axial field. Such instabilities differ dramatically from the mostly azimuthally symmetric instabilities that form on unmagnetized liners. The helical structure persists at nearly constant pitch as the liner implodes. This is surprising since, at the liner surface, the azimuthal drive field presumably dwarfs the axial field for all but the earliest stages of the experiment. These fundamentally 3D results provide a unique and challenging test for 3D-magnetohydrodynamics simulations.

Investigation of high-temperature bright plasma X-ray sources produced in 5-MA X-pinch experiments.

Using solid, machined X-pinch targets driven by currents rising from 0 to 5-6 MA in 60 ns, we observed bright spots of 5-9-keV continuum radiation from 5±2-µm diameter regions. The >6-keV radiation is emitted in about 0.4 ns, and the bright spots are roughly 75 times brighter than the bright spots measured at 1 MA. A total x-ray power of 10 TW peak and yields of 165±20 kJ were emitted from a 3-mm height. The 3-5-keV continuum radiation had a 50-90-GW peak power and 0.15-0.35-kJ yield. The continuum is plausibly from a 1275±75-eV blackbody or alternatively from a 3500±500-eV bremsstrahlung source.

Penetrating radiography of imploding and stagnating beryllium liners on the Z accelerator.

The implosions of initially solid beryllium liners (tubes) have been imaged with penetrating radiography through to stagnation. These novel radiographic data reveal a high degree of azimuthal correlation in the evolving magneto-Rayleigh-Taylor structure at times just prior to (and during) stagnation, providing stringent constraints on the simulation tools used by the broader high energy density physics and inertial confinement fusion communities. To emphasize this point, comparisons to 2D and 3D radiation magnetohydrodynamics simulations are also presented. Both agreement and substantial disagreement have been found, depending on how the liner's initial outer surface finish was modeled. The various models tested, and the physical implications of these models are discussed. These comparisons exemplify the importance of the experimental data obtained.

Reproduction in chinchilla (Chinchilla lanigera): current status of environmental control of gonadal activity and advances in reproductive techniques.

A review of the biology of reproduction of chinchilla, focusing on environmental control of the gonadal activity, is presented. Chinchilla is a South American hystricomorph rodent genus currently considered almost extinct in the wild. However, a domestic form is still widespread in breeding farms around the world. Information regarding their reproductive biology has been obtained from studies on captive animals. In the case of Chinchilla lanigera, a seasonal reproductive pattern has been frequently reported in breeding facilities, but factors that might trigger gonadal activity have not been identified. The available information on reproductive productivity in farms worldwide shows a range of 1.2 to 2.4 deliveries per female per yr (with up to 2.1 weaned young per female per yr). Indeed, as found in all rodents, chinchillas can multiply at high fecundity and fertility rates (4 to 6 follicles mature during estrous cycles). Some new research avenues are postulated to improve the control of gonadal activity by means of environmental and/or pharmacologic factors. Furthermore, reproductive techniques that have been validated in chinchilla are reviewed (noninvasive hormone monitoring, semen collection, sperm cryopreservation, estrus induction), and several technical steps are proposed to be able to achieve AI. Because domesticated chinchilla still share some genomic characteristics with their counterparts in the wild, validated reproductive techniques in chinchilla males and females might contribute to the success of breeding programs.

Reproductive performance and fertility in male and female adult mice chronically treated with hexarelin.

Hexarelin (HEXr), a synthetic ghrelin analogue, has been associated with modifications of reproductive physiology. In previous studies of adult mice, we detected that HEXr induced significantly reduced ovulation rate and significant correlation coefficients between sexual maturation and corporal weight in offspring. In this study, we investigated the effects of chronic HEXr administration on sperm concentration and functional activity, oestrous cyclicity and pregnancy index, in addition to the number of fetuses and its correlation with the number of corpora lutea. Adult Albino swiss mice were injected (sc) daily with HEXr: 100 µgkg(-1) day(-1) (HEXr D1) or 200 µgkg(-1) day(-1) (HEXr D2) for 53 days in males and 30 days in females. We detected a significantly decreased ratio in the number of fetuses per corpora lutea in females treated with HEXr D2 for 30 days before mating and during the first 6 days of pregnancy, in addition to a downward trend in the pregnancy index and percentage of females impregnated by each male treated with both doses of the analogue. Although we did not find any significant effect on additional parameters evaluated in both genders, we propose certain effects of HEXr on the implantation process and/or early development of embryos and over the in vivo reproductive capability of males.

Doppler measurement of implosion velocity in fast Z-pinch x-ray sources.

The observation of Doppler splitting in K-shell x-ray lines emitted from optically thin dopants is used to infer implosion velocities of up to 70 cm/µs in wire-array and gas-puff Z pinches at drive currents of 15-20 MA. These data can benchmark numerical implosion models, which produce reasonable agreement with the measured velocity in the emitting region. Doppler splitting is obscured in lines with strong opacity, but red-shifted absorption produced by the cooler halo of material backlit by the hot core assembling on axis can be used to diagnose velocity in the trailing mass.

Hippocampal effects of neuronostatin on memory, anxiety-like behavior and food intake in rats.

A 13-amino acid peptide named neuronostatin (NST) encoded in the somatostatin pro-hormone has been recently reported. It is produced throughout the body, particularly in brain areas that have significant actions over the metabolic and autonomic regulation. The present study was performed in order to elucidate the functional role of NST on memory, anxiety-like behavior and food intake and the hippocampal participation in these effects. When the peptide was intra-hippocampally administered at 3.0 nmol/µl, it impaired memory retention in both, object recognition and step-down test. Also, this dose blocked the hippocampal long-term potentiation (LTP) generation. When NST was intra-hippocampally administered at 0.3 nmol/µl and 3.0 nmol/µl, anxiolytic effects were observed. Also, the administration in the third ventricle at the higher dose (3.0 nmol/µl) induced similar effects, and both doses reduced food intake. The main result of the present study is the relevance of the hippocampal formation in the behavioral effects induced by NST, and these effects could be associated to a reduced hippocampal synaptic plasticity.

Ion temperature and hydrodynamic-energy measurements in a Z-pinch plasma at stagnation.

The time history of the local ion kinetic energy in a stagnating plasma was determined from Doppler-dominated line shapes. Using independent determination of the plasma properties for the same plasma region, the data allowed for inferring the time-dependent ion temperature, and for discriminating the temperature from the total ion kinetic energy. It is found that throughout most of the stagnation period the ion thermal energy constitutes a small fraction of the total ion kinetic energy; the latter is dominated by hydrodynamic motion. Both the ion hydrodynamic and thermal energies are observed to decrease to the electron thermal energy by the end of the stagnation period. It is confirmed that the total ion kinetic energy available at the stagnating plasma and the total radiation emitted are in balance, as obtained in our previous experiment. The dissipation time of the hydrodynamic energy thus appears to determine the duration (and power) of the K emission.