Brownfields to green fields: Realising wider benefits from practical contaminant phytomanagement strategies.

Gentle remediation options (GROs) are risk management strategies or technologies involving plant (phyto-), fungi (myco-), and/or bacteria-based methods that result in a net gain (or at least no gross reduction) in soil function as well as effective risk management. GRO strategies can be customised along contaminant linkages, and can generate a range of wider economic, environmental and societal benefits in contaminated land management (and in brownfields management more widely). The application of GROs as practical on-site remedial solutions is still limited however, particularly in Europe and at trace element (typically metal and metalloid) contaminated sites. This paper discusses challenges to the practical adoption of GROs in contaminated land management, and outlines the decision support tools and best practice guidance developed in the European Commission FP7-funded GREENLAND project aimed at overcoming these challenges. The GREENLAND guidance promotes a refocus from phytoremediation to wider GROs- or phyto-management based approaches which place realisation of wider benefits at the core of site design, and where gentle remediation technologies can be applied as part of integrated, mixed, site risk management solutions or as part of "holding strategies" for vacant sites. The combination of GROs with renewables, both in terms of biomass generation but also with green technologies such as wind and solar power, can provide a range of economic and other benefits and can potentially support the return of low-level contaminated sites to productive usage, while combining GROs with urban design and landscape architecture, and integrating GRO strategies with sustainable urban drainage systems and community gardens/parkland (particularly for health and leisure benefits), has large potential for triggering GRO application and in realising wider benefits in urban and suburban systems. Quantifying these wider benefits and value (above standard economic returns) will be important in leveraging funding for GRO application and soft site end-use more widely at vacant or underutilized sites.

Developing and validating a practical decision support tool (DST) for biomass selection on marginal land.

Marginal, often contaminated, sites exist in large areas across the world as a result of historic activities such as industry, transportation and mineral extraction. Remediation, or other improvements, of these sites is typically only considered for sites with high exploitation pressure and those posing the highest risks to human health or the environment. At the same time there is increasing competition for land resources for different needs such as biofuel production. Potentially some of this land requirement could be met by production of biomass on brownfield or other marginal land, thereby improving the land while applying the crop cultivation as part of an integrated management strategy. The design and decision making for such a strategy will be site specific. A decision support framework, the Rejuvenate DST (decision support tool) has been developed with the aim of supporting such site specific decision making. This tool is presented here, and has been tested by applying it to a number of case study sites. The consequent SWOT (strength, weakness, opportunities and threats) analysis is discussed and evaluated. The DST was found to be systematic, transparent, and applicable for diverse sites in France, Romania and Sweden, in addition to the sites to which it was applied through its development. The DST is regarded as especially useful if applied as a checklist in an iterative way throughout the decision process, from identifying potential crops to identifying knowledge gaps, working/non-working management strategies and potential risks. The DST also provides a structure promoting effective stakeholder engagement.

Three-dimensional geological modelling of anthropogenic deposits at small urban sites: a case study from Sheepcote Valley, Brighton, UK.

Improvements in computing speed and capacity and the increasing collection and digitisation of geological data now allow geoscientists to produce meaningful 3D spatial models of the shallow subsurface in many large urban areas, to predict ground conditions and reduce risk and uncertainty in urban planning. It is not yet clear how useful this 3D modelling approach is at smaller urban scales, where poorly characterised anthropogenic deposits (artificial/made ground and fill) form the dominant subsurface material and where the availability of borehole and other geological data is less comprehensive. This is important as it is these smaller urban sites, with complex site history, which frequently form the focus of urban regeneration and redevelopment schemes. This paper examines the extent to which the 3D modelling approach previously utilised at large urban scales can be extended to smaller less well-characterised urban sites, using a historic landfill site in Sheepcote Valley, Brighton, UK as a case study. Two 3D models were generated and compared using GSI3D™ software, one using borehole data only, one combining borehole data with local geological maps and results from a desk study (involving collation of available site data, including ground contour plans). These models clearly delimit the overall subsurface geology at the site, and allow visualisation and modelling of the anthropogenic deposits present. Shallow geophysical data collected from the site partially validate the 3D modelled data, and can improve GSI3D™ outputs where boundaries of anthropogenic deposits may not be clearly defined by surface, contour or borehole data. Attribution of geotechnical and geochemical properties to the 3D model is problematic without intrusive investigations and sampling. However, combining available borehole data, shallow geophysical methods and site histories may allow attribution of generic fill properties, and consequent reduction of urban development risk and uncertainty.

Developing principles of sustainability and stakeholder engagement for "gentle" remediation approaches: the European context.

Gentle Remediation Options (GRO) are risk management strategies or techniques for contaminated sites that result in no gross reduction in soil functionality (or a net gain) as well as risk management. Intelligently applied GROs can provide: (a) rapid risk management via pathway control, through containment and stabilisation, coupled with a longer term removal or immobilisation/isolation of the contaminant source term; and (b) a range of additional economic (e.g. biomass generation), social (e.g. leisure and recreation) and environmental (e.g. CO2 sequestration) benefits. In order for these benefits to be optimised or indeed realised, effective stakeholder engagement is required. This paper reviews current sector practice in stakeholder engagement and its importance when implementing GRO and other remediation options. From this, knowledge gaps are identified, and strategies to promote more effective stakeholder engagement during GRO application are outlined. Further work is required on integrating stakeholder engagement strategies into decision support systems and tools for GRO (to raise the profile of the benefits of effective stakeholder engagement and participation, particularly with sector professionals), and developing criteria for the identification of different stakeholder profiles/categories. Demonstrator sites can make a significant contribution to stakeholder engagement via providing evidence on the effectiveness of GRO under varying site contexts and conditions. Effective and sustained engagement strategies however will be required to ensure that site risk is effectively managed over the longer-term, and that full potential benefits of GRO (e.g. CO2 sequestration, economic returns from biomass generation and "leverage" of marginal land, amenity and educational value, ecosystem services) are realised and communicated to stakeholders.

Long-term fate of polycyclic aromatic hydrocarbons (PAH) in sediments from Loch Leven after closure of an aluminium smelter.

An aluminium smelter discharged polycyclic aromatic hydrocarbons (PAHs) into Loch Leven on the west of Scotland from 1907 until it closed in 2000, resulting in elevated PAH concentrations in the sediment. A temporal monitoring programme to investigate any recovery in sediment concentrations began in 2004, with sampling each year until 2008 and again in 2010. Cores were also collected to investigate temporal trends over a longer time scale and to estimate the sedimentation rate in the loch. The loch is divided into two basins, and PAH concentrations were significantly higher in the upper basin, closer to the smelter, than in the lower basin. The PAH distribution and concentration ratios were consistent with a pyrolytic source of PAHs, with a high proportion of heavier parent PAHs. There was no evidence of any recovery in PAH concentrations, perhaps due to the mixing and disturbances of the sediment, and the persistence of PAHs. Concentrations of all PAHs were above the Background Assessment Concentrations (BACs) in both basins. In the lower basin only the 5- and 6-ring PAHs were above the Effects Range Low (ERL) values, but in the upper basin all but naphthalene were above the ERLs. There is therefore still an unacceptable risk of chronic effects in marine species. Concentrations decreased down the cores, falling below BACs in the deepest sections. However, ERLs were exceeded as far down the core as 30 cm for some PAHs.

The uptake of iron-55 by marine sediment, macroalgae, and biota following discharge from a nuclear power station.

Significant quantities of 55Fe, an activation product of stable iron, have been released into the environment following the atmospheric testing of nuclear weapons (mainly in the 1950s and 1960s) as well as through authorized discharges of radioactivity from nuclear power and reprocessing sites. Although some studies have been performed on the behavior of weapons' fallout-derived 55Fe in the environment and subsequent impact on humans, little has been published on the behavior of 55Fe released as a point source discharge from nuclear sites. This study presents data on the concentration and temporal variation of 55Fe in fucoid seaweeds, shellfish, crab, and lobster collected from Weymouth Bay and adjacent coastal areas, southern England. These areas have received authorized discharges of radionuclides originating from the operation of a now-decommissioned steam-generating, heavy water-type reactor at AEE Winfrith. The highest activities of 55Fe are found associated with marine sediments collected near the discharge pipeline and a rapid decline occurs away from the pipeline. This is consistent with rapid sorption of 55Fe by the sediment, and the data show there is only limited reworking and remobilization. Activities of 55Fe in biota generally decreased over time, due to a reduction in the amount of 55Fe discharged. The variation of 55Fe activity, revealed from the monthly sampling of seaweed, does not reflect the short-term fluctuations seen in the patterns of discharged 55Fe activity. Although discharges of 55Fe from AEE Winfrith exceeded other radionuclides, the radiological impact on local seafood consumers is considerably less than for other key radionuclides such as 60Co and 65Zn but of comparable magnitude to the global average population dose arising from fallout-derived 55Fe.

A techinque for recording the results of knee surgery.

A research form for recording clinical data relating to the arthritic knee is described. Data are recorded using a numerical code which facilitates transfer to a computer and provides an easily read record. Any form must be a compromise but the one described has been proven clinically by providing the data for a multi-center evaluation of hundreds of knees observed over a period of 5 years. A shorter form is described for routine follow-up purposes.

The presentation of the results of knee surgery.

A method is described by which the detailed results of knee surgery may be presented in a compact, readily understood and easily analyzable fashion. The data can be analyzed and presented either manually or by a computer and if the latter is used no special print-out equipment is required. The success of the method has been proved over a 5-year period in the monitoring of the results of a multi-institutional investigation of total knee arthroplasty.

The use of a computer in an obstetric department.

Experience with a computer in an obstetric department is presented. A regular statistical analysis of the work of the department was readily available and computer printed summaries were produced for 86 per cent of the patients within one week of their discharge home. Solutions to problems encountered are discussed. It is concluded that a computer can be used economically and advantageously in this way even in hospitals without a computer on site. Future developments in the use of the computer are outlined.