Nutrient-dense protein as a primary dietary strategy in healthy ageing: please sir, may we have more?

A progressive decrement in muscle mass and muscle function, sarcopoenia, accompanies ageing. The loss of skeletal muscle mass and function is the main feature of sarcopoenia. Preventing the loss of muscle mass is relevant since sarcopoenia can have a significant impact on mobility and the quality of life of older people. Dietary protein and physical activity have an essential role in slowing muscle mass loss and helping to maintain muscle function. However, the current recommendations for daily protein ingestion for older persons appear to be too low and are in need of adjustment. In this review, we discuss the skeletal muscle response to protein ingestion, and review the data examining current dietary protein recommendations in the older subjects. Furthermore, we review the concept of protein quality and the important role that nutrient-dense protein (NDP) sources play in meeting overall nutrient requirements and improving dietary quality. Overall, the current evidence endorses an increase in the daily ingestion of protein with emphasis on the ingestion of NDP choices by older adults.

The American Orthopaedic Association's Own the Bone® database: a national quality improvement project for the treatment of bone health in fragility fracture patients.

The American Orthopaedic Association initiated the Own the Bone (OTB) quality improvement program in 2009. Herein we show that the data collected through this program is similar to that collected in other large studies. Thus, the OTB registry functions as an externally valid cohort for studying fragility fracture patients. INTRODUCTION: The American Orthopedic Association initiated the Own the Bone (OTB) quality improvement program in 2009 to improve secondary prevention of fragility fractures. In this study, we present a summary of the data collected by the OTB program and compare it to data from other large fragility fracture registries with an aim to externally validate the OTB registry. METHODS: The OTB registry contained 35,038 unique cases of fragility fracture as of September, 2016. We report the demographics, presenting fracture characteristics, past fracture history, and bone mineral density (BMD) data and compare these to data from large fragility fracture studies across the world. RESULTS: Seventy-three percent of the patients in the OTB registry were female, Caucasian, and post-menopausal. In 54.4% of cases, patients had a hip fracture; spine fractures were the second most common fracture type occurring in 11.1% of patients. Thirty-four percent of the patients had a past history of fragility fracture, and the most common sites were the spine and hip. The average femoral neck T-score was - 2.06. When compared to other studies, the OTB database showed similar findings with regard to patient age, gender, race, BMI, BMD profile, prior fracture history, and family history of fragility fractures. CONCLUSION: OTB is the first and largest multi-center voluntary fragility fracture registry in the USA. The data collected through the OTB program is comparable to that collected in international studies. Thus, the OTB registry functions as an externally valid cohort for further studies assessing the clinical characteristics, interventions, and outcomes achieved in patients who present with a fragility fracture in the USA.

In vivo oxidation in retrieved highly crosslinked tibial inserts.

The current study determined (I) the environment where oxidation in a series of retrieved, HXL UHMWPE tibial inserts occurred (in vivo or postexplant); and (II) the effect of fabrication variables (irradiation source, irradiation dose) and thermal processing after irradiation (annealing or remelting) on oxidation resistance. Hypotheses examined are (1) HXL UHMWPE tibial inserts have potential to oxidize in vivo, and (2) annealed HXL UHMWPE oxidizes at a higher rate in vivo than remelted HXL UHMWPE. Highly crosslinked UHMWPE tibial inserts (87), received by an IRB-approved retrieval laboratory from 20 surgeons at 10 institutions across the U.S., were analyzed from 2005 to 2011. Fourier transform infrared spectroscopy was used to determine oxidation and trans-vinylene index for each retrieved insert. Measured oxidation that was maximum subsurface was found in 56% of all HXL tibial inserts. This maximum oxidation correlated significantly with in vivo time, trans-vinylene index, and thermal processing after irradiation. Articular oxidation rate correlated with crosslinking irradiation dose and thermal processing after irradiation. Retrieved below-melt annealed tibial inserts had significantly higher articular oxidation rates than remelted tibial inserts (p < 0.001). Articular oxidation rates correlated positively with cross-linking irradiation dose and postirradiation thermal processing. Edge oxidation correlated with postirradiation thermal processing. Oxidation of HXL UHMWPE may have clinical implications for tibial inserts, since loss of UHMWPE toughness resulting from oxidation has led to fatigue damage in gamma-sterilized tibial inserts.

In vivo oxidation in remelted highly cross-linked retrievals.

BACKGROUND: Elimination of free radicals to prevent oxidation has played a major role in the development and product differentiation of the latest generation of highly cross-linked ultra-high molecular weight polyethylene bearing materials. In the current study, we (1) examined oxidation in a series of retrieved remelted highly cross-linked ultra-high molecular weight polyethylene bearings from a number of device manufacturers and (2) compared the retrieval results with findings for shelf-stored control specimens. The hypothesis was that radiation-cross-linked remelted ultra-high molecular weight polyethylene would maintain oxidative stability in vivo comparable with the stability during shelf storage and in published laboratory aging tests. METHODS: Fifty remelted highly cross-linked ultra-high molecular weight polyethylene acetabular liners and nineteen remelted highly cross-linked ultra-high molecular weight polyethylene tibial inserts were received after retrieval from twenty-one surgeons from across the U.S. Thirty-two of the retrievals had been in vivo for two years or more. Each was measured for oxidation with use of Fourier transform infrared spectroscopy. A control series of remelted highly cross-linked ultra-high molecular weight polyethylene acetabular liners from three manufacturers was analyzed with electron paramagnetic resonance spectroscopy to measure free radical content and with Fourier transform infrared spectroscopy to measure oxidation initially and after eight to nine years of shelf storage in air. RESULTS: The never-implanted, shelf-aged controls had no measurable free-radical content initially or after eight to nine years of shelf storage. The never-implanted controls showed no increase in oxidation during shelf storage. Oxidation measurements showed measurable oxidation in 22% of the retrieved remelted highly cross-linked liners and inserts after an average of two years in vivo. CONCLUSIONS: Because never-implanted remelted highly cross-linked ultra-high molecular weight polyethylene materials had no measurable free-radical concentration and no increase in oxidation during shelf storage, these materials were expected to be oxidation-resistant in vivo. However, some remelted highly cross-linked ultra-high molecular weight polyethylene retrievals showed measurable oxidation after an average of more than two years in vivo. This apparent departure from widely expected behavior requires continued study of the process of in vivo oxidation of ultra-high molecular weight polyethylene materials.

Multidirectional neck strength and electromyographic activity for normal controls.

OBJECTIVE: To assess the multidirectional force and indwelling electromyographic activity during maximal effort isometric actions of the neck. DESIGN: A descriptive study involving maximal effort isometric actions of the neck and bilateral electromyographic activity. BACKGROUND: This study extends previous efforts to assess the isometric strength of the neck, but with greater precision with respect to the intermediate angles between the frontal and sagittal planes. METHODOLOGY: Participants (n = 18) generated a maximal isometric force in twelve directions in the horizontal plane. All exertions were realized in neutral position. A load cell measured forces and intramuscular fine-wire electrodes were used to record the bilateral electromyographic activity of the sternocleidomastoid, scalenus medius, trapezius (middle fibers), semispinalis capitis, and splenius capitis. RESULTS: Strength in the anterolateral directions were similar, but exhibited right lateral dominance in extension. The sternocleidomastoid and trapezius (middle fibers) exhibited bilateral symmetry while the scalenus medius, semispinalis capitis, and splenius capitis did not. Furthermore, the agonist, synergist, and antagonist action of the individual muscles was clear. The direction of force that resulted in the greatest electromyographic activity was consistent with what has been shown in anatomy texts. This was not true for the scalenus medius. We showed that the scalenus medius contributes to extension, with synergistic activity in the lateral bending direction. CONCLUSIONS: The greater precision revealed novel information about the isometric strength of the neck and its musculature.

Animal models of spinal cord injury for evaluation of tissue engineering treatment strategies.

Tissue engineering approaches to spinal cord injury (SCI) treatment are attractive because they allow for manipulation of native regeneration processes involved in restoration of the integrity and function of damaged tissue. A clinically relevant spinal cord regeneration animal model requires that the model mimics specific pathologic processes that occur in human SCI. This manuscript discusses issues related to preclinical testing of tissue engineering spinal cord regeneration strategies from a number of perspectives. This discussion includes diverse causes, pathology and functional consequences of human SCI, general and species related considerations, technical and animal care considerations, and data analysis methods.

Biodegradable polymer scaffolds for cartilage tissue engineering.

Cartilage defects are common, painful conditions and none of the currently available treatment options are satisfactory. Tissue engineering techniques involving scaffolds made from biodegradable synthetic polymers hold great promise for the future. These materials can be manufactured in an injectable form for minimally invasive procedures or in a preformed state to treat large irreparable lesions including arthritis. The mechanical and biologic properties of synthetic polymers can be tailored to different clinical applications and engineering strategies. The scaffold serves as a mechanical substrate for cells and bioactive factors and can help direct and organize the process of regeneration. The ultimate goal of tissue engineering is to recapitulate normal organogenesis to create histologically and functionally normal tissue. A review of the characteristics and potential of synthetic polymers shows that these substances will play a major role in treating cartilage disorders.

Interlaboratory studies to determine optimal analytical methods for measuring the oxidation index of UHMWPE.

Fourier transform infrared spectroscopy has emerged as the technique of choice for the quantification of oxidation in ultra-high molecular weight polyethylene used in orthopedic implants. We initiated interlaboratory studies to determine the method of normalization, hence quantification, that provided the highest level of reproducibility across multiple institutions. The goal of this research was to identify optimal normalization methods that minimize the experimental uncertainties associated with interlaboratory reproducibility and intralaboratory repeatability of oxidation index measurements. Test samples were prepared from GUR 4150 HP, gamma irradiated in air, and had a shelf age of two years. Samples were analyzed according to ten oxidation index test methods during two interlaboratory studies, which were conducted in accordance with ASTM E691. Variations in reproducibility and repeatability were evaluated using analysis of variance (ANOVA). The basis of the test methods (peak area-based vs. peak height-based), as well as the normalization method, were both found to be associated with significant differences in reproducibility (p = 0.0006 andp < 0.0001, respectively). Normalization techniques based on the 1370 and 2022cm(-1) peaks areas were found to be the most reproducible methods, and were associated with mean interlaboratory uncertainties of 16.5% and 24.2%, respectively. Repeatability of the test methods was not sensitive to the normalization technique; the mean intralaboratory repeatability for all of oxidation index measurements was found to be 10.2%. The results of this interlaboratory research will be a useful basis for the development of a new oxidation index standard for the orthopedics community.

Interlaboratory reproducibility of standard accelerated aging methods for oxidation of UHMWPE.

During accelerating aging, experimental uncertainty may arise due to variability in the oxidation process, or due to limitations in the technique that is ultimately used to measure oxidation. The purpose of the present interlaboratory study was to quantify the repeatability and reproducibility of standard accelerated aging methods for ultra-high molecular weight polyethylene (UHMWPE). Sections (200 microm thick) were microtomed from the center of an extruded rod of GUR 4150 HP, gamma irradiated in air or nitrogen, and circulated to 12 institutions in the United States and Europe for characterization of oxidation before and after accelerated aging. Specimens were aged for 3 weeks at 80 degrees C in an air circulating oven or for 2 weeks at 70 degrees C in an oxygen bomb (maintained at 503 kPa (5 atm.) of O2) in accordance with the two standard protocols described in ASTM F 2003-00. FTIR spectra were collected from each specimen within 24 h of the start and finish of accelerated aging, and oxidation indices were calculated by normalizing the peak area of the carbonyl region by the reference peak areas at 1370 or 2022 cm(-1). The mean relative interlaboratory uncertainty of the oxidation data was 78.5% after oven aging and 129.1% after bomb aging. The oxidation index measurement technique was not found to be a significant factor in the reproducibility. Comparable relative intrainstitutional uncertainty was observed after oven aging and bomb aging. For both aging methods, institutions successfully discriminated between air-irradiated and control specimens. However, the large interinstitutional variation suggests that absolute performance standards for the oxidation index of UHMWPE after accelerated aging may not be practical at the present time.

Ossification of the posterior longitudinal ligament in vitamin D-resistant rickets: case report and review of the literature.

STUDY DESIGN: A case report of cervical myelopathy caused by ossification of the posterior longitudinal ligament in a patient with vitamin D-resistant rickets is presented together with a review of literature. OBJECTIVE: To report the diagnosis of ossification of the posterior longitudinal ligament in a white woman with vitamin D-resistant rickets. SUMMARY OF BACKGROUND DATA: The association between ossification of the posterior longitudinal ligament and untreated vitamin D-resistant rickets has been reported in Japan, but infrequently in white populations. In whites, ossification of the posterior longitudinal ligament is closely associated with diffuse idiopathic skeletal hyperostosis. A clear association between ossification of the posterior longitudinal ligament and vitamin D-resistant rickets in white populations has not yet been established. METHODS: The medical record and imaging studies of a patient treated at the authors' institution for cervical myelopathy caused by ossification of the posterior longitudinal ligament in the setting of treated vitamin D-resistant rickets were reviewed. A Medline search of the medical literature between 1966-1999 was performed to identify pertinent studies and similar case reports. RESULTS: The occurrence of spinal stenosis in untreated adults with vitamin D-resistant rickets has been reported in all regions of the spine in Japanese patients. The association between ossification of the posterior longitudinal ligament and untreated vitamin D-resistant rickets was first reported in Japan, where ossification of the posterior longitudinal ligament is endemic. This association may be incidental, because reports on ossification of the posterior longitudinal ligament in whites are not as frequent as in Japanese, reflecting the higher prevalence of this condition in Japan. CONCLUSION: Ossification of the posterior longitudinal ligament and ossification of the posterior longitudinal ligament associated with deranged calcium or phosphate metabolism may be different pathologic entities sharing a common outcome. Adequate treatment of vitamin D-resistant rickets may not always prevent or reverse ossification of the posterior longitudinal ligament.

Partial lumbosacral transitional vertebra resection for contralateral facetogenic pain.

STUDY DESIGN: Case report of surgically treated mechanical low back pain from the facet joint contralateral to a unilateral anomalous lumbosacral articulation (Bertolotti's syndrome). OBJECTIVES: To describe the clinical presentation, diagnostic evaluation, and management of facet-related low back pain in a 17-year-old cheerleader and its successful surgical treatment with resection of a contralateral anomalous articulation. SUMMARY OF BACKGROUND DATA: Lumbosacral transitional vertebrae are common in the general population. Bertolotti's syndrome is mechanical low back pain associated with these transitional segments. Little is known about the pathophysiology and mechanics of these vertebral segments and their propensity to be pain generators. Treatment of this syndrome is controversial, and surgical intervention has been infrequently reported. METHOD: A retrospective chart analysis and radiographic review were performed. RESULTS: Repeated fluoroscopically guided injections implicated a symptomatic L6-S1 facet joint contralateral to an anomalous lumbosacral articulation. Eventually, a successful surgical outcome was achieved with resection of the anomalous articulation. CONCLUSION: Clinicians should consider the possibility that mechanical low back pain may occur from a facet contralateral to a unilateral anomalous lumbosacral articulation, even in a young patient. Although reports of surgical treatment of Bertolotti's syndrome are infrequent, resection of the anomalous articulation provided excellent results in this patient, presumably because of reduced stresses on the symptomatic facet.

Mechanical properties of a biodegradable bone regeneration scaffold.

Poly (Propylene Fumarate) (PPF), a novel, bulk erosion, biodegradable polymer, has been shown to have osteoconductive effects in vivo when used as a bone regeneration scaffold (Peter, S. J., Suggs, L. J., Yaszemski, M. J., Engel, P. S., and Mikos, A. J., 1999, J. Biomater. Sci. Polym. Ed., 10, pp. 363-373). The material properties of the polymer allow it to be injected into irregularly shaped voids in vivo and provide mechanical stability as well as function as a bone regeneration scaffold. We fabricated a series of biomaterial composites, comprised of varying quantities of PPF, NaCl and beta-tricalcium phosphate (beta-TCP), into the shape of right circular cylinders and tested the mechanical properties in four-point bending and compression. The mean modulus of elasticity in compression (Ec) was 1204.2 MPa (SD 32.2) and the mean modulus of elasticity in bending (Eb) was 1274.7 MPa (SD 125.7). All of the moduli were on the order of magnitude of trabecular bone. Changing the level of NaCl from 20 to 40 percent, by mass, did not decrease Ec and Eb significantly, but did decrease bending and compressive strength significantly. Increasing the beta-TCP from 0.25 g/g PPF to 0.5 g/g PPF increased all of the measured mechanical properties of PPF/NVP composites. These results indicate that this biodegradable polymer composite is an attractive candidate for use as a replacement scaffold for trabecular bone.

Biological activity of rhBMP-2 released from PLGA microspheres.

Human recombinant bone morphogenetic protein-2 (rhBMP-2) has been proven effective in stimulating the regeneration of bone in both skeletal and extraskeletal locations. Through encapsulation within, and release from, biodegradable poly(DL-lactic-co-glycolic acid) (PLGA) microspheres, a proven vehicle for sustained delivery of various proteins, the local concentrations of rhBMP-2 could be maintained at optimal levels to stimulate bone regeneration and remodeling at the site of healing in diverse clinical settings. Thus the purpose of this work was to investigate the encapsulation of rhBMP-2 in PLGA microspheres and its biologic activity upon release. Using in vitro tests in simulated body fluids, the effect of rhBMP-2 released from PLGA microspheres upon osteoblast cell cultures was found to be statistically similar to the effect produced by positive controls consisting of nonencapsulated aqueous rhBMP-2 in simulated body fluids. This clarifies an important step in skeletal tissue engineering strategies aimed at the use of encapsulated rhBMP-2 to stimulate bone regeneration and remodeling.

Biomechanical evaluation of occipital fixation.

Many studies have shown a positive correlation among screw pullout strength, screw insertional torque, bone thickness, and areal bone mineral density (BMD) measured by dual-energy X-ray absorptiometry. Variations are significant in the anatomy of the occipital bone. But no studies have correlated these variables with respect to the two locations commonly used for plate fixation to the occiput. The purpose of this study was to determine the thickness and quality of the occipital bone and to correlate these variables with the insertional torque of screws and the pullout strength of plates secured into two different locations on the occiput. The occiputs of 12 adult human fresh frozen cadaveric specimens were used. The specimens were analyzed by dual-energy X-ray absorptiometry. Direct thickness measurements of the occiput were performed. Areal and volumetric BMD were measured. A simple pelvic reconstruction plate (3.2 mm) was fixed to the occiput either laterally or at the midline with bicortical 4-mm cancellous screws. Torque was recorded at the time of insertion of each screw. Axial pullout tests were performed on all specimens. The peak load, failure load, stiffness, and energy to failure were recorded for each construct. Statistical analysis showed that the average thickness of occipital bone is greater in the midline than laterally. Occipital bone is thicker and screw torque is greater close to the inion. There is a positive correlation between bone thickness, areal BMD as measured by dual-energy X-ray absorptiometry, screw insertional torque, and strength of fixation. A plate fixed in the midline region of the occiput provides more rigid fixation than a plate fixed laterally. Areal BMD correlates better than volumetric BMD with bone thickness and is a reliable predictor of the strength of occipital fixation.

Effect of fabrication method and resin type on performance of tibial bearings.

Polyethylene has been used successfully for more than 30 years as an orthopedic bearing material. During this time, several polyethylene resins and fabrication methods have been used to produce bearings. Some bearings fail prematurely due to fatigue, which has been linked to oxidation and degradation of mechanical properties resulting from gamma sterilization in air. Fabrication method and/or resin have been hypothesized to govern whether oxidative degradation occurs in gamma-sterilized bearings. This study evaluates the effect of fabrication (machining/direct compression molding) and resin type on oxidation and the resulting mechanical properties for a large series of never-implanted bearings. While many molded bearings studied exhibit lower oxidation than machined bearings, fabrication method is not a significant predictor of oxidation. Resin type and shelf-age are found to be significant predictors of oxidation. Bearings fabricated from Himont 1900 exhibit lower oxidation than those from GUR 415/412 at comparable times after gamma in air. However, Himont 1900 bearings lose strength and elongation at lower oxidation levels than GUR 415/412 bearings. But since Himont 1900 oxidizes more slowly, Himont 1900 bearings retain mechanical properties for longer shelf times than comparable GUR 415/412 bearings. These effects are seen in retrievals as well.

Current sterilization and packaging methods for polyethylene.

Gamma sterilization in an air environment can induce oxidation in polyethylene. Oxidation can lead to polyethylene embrittlement, compromising mechanical integrity and clinical performance of polyethylene bearings. For these reasons, orthopaedic manufacturers have modified their methods of sterilizing and packaging polyethylene. Two alternative approaches have emerged: sterilization by non-radiation methods and sterilization by gamma irradiation in inert environments. The current study presents a prognosis for clinical performance of polyethylene sterilized with new methods, based on material property analyses (oxidation levels, mechanical properties, crosslink density) of never implanted and retrieved bearings. Data from bearings that were never implanted which were sterilized with the new methods and shelf aged as many as 3 years, show negligible oxidation, ductility above 400%, and ultimate tensile strength near 50 MPa, all exceeding specifications of the American Society for Testing and Materials. There are significant differences in crosslink density (swell ratio) depending on the sterilization method. Retrievals indicate that bearings sterilized with these new methods are performing well clinically and that the majority are not changing with time. The current study suggests that the shelf oxidation problem has been addressed by these new sterilization techniques and that clinical performance at short followup is acceptable. However, long-term clinical performance must be evaluated in the future.

Vertebra plana of the lumbar spine caused by an aneurysmal bone cyst: a case report.

The patient was a 15-year-old girl who had a lesion of the fourth lumbar vertebra. Plain radiographs suggested vertebra plana, with complete collapse of the body of the fourth lumbar vertebra and no involvement of the intervertebral disk spaces. The presumptive diagnosis was eosinophilic granuloma. Progressive neurologic symptoms required surgical excision of the lesion, decompression, and fusion. Histopathologic examination of the operative specimen confirmed the diagnosis of an aneurysmal bone cyst.

In vitro simulation of contact fatigue damage found in ultra-high molecular weight polyethylene components of knee prostheses.

An in vitro simulation of fatigue loading of ultra-high molecular weight polyethylene (UHMWPE) knee components was carried out on a knee simulator and on a rolling and sliding wear tester. Tibial components for the knee simulator were gamma-sterilized, implantable components taken from manufacturing inventory. The rolling/sliding UHMWPE discs were machined from bar stock and either gamma sterilized in air and accelerated aged, or left as non-sterilized (controls). Cracking and delamination of samples that had been gamma sterilized in air and aged were observed in both types of tests. Contact fatigue damage was visible in as few as 150,000 cycles using the knee simulator at loads of 122 N (275 1b). The rolling/sliding samples showed signs of damage in as few as 130,000 cycles with an estimated stress of 15 MPa and 25 per cent sliding. However, cracking and delamination were not generated in the never-sterilized or recently sterilized controls. UHMWPE that has been gamma sterilized in air and aged is shown to be susceptible to contact fatigue damage. These results are important to the interpretation of in vitro total knee replacement simulations used to assess the performance of tibial bearings.

An analysis of hylamer and polyethylene bearings from retrieved acetabular components.

Hylamer and conventional polyethylene acetabular liners of the same design, revised for a variety of reasons, were examined and compared to assess the performance of Hylamer as a bearing material. Clinical damage modes, linear wear rates, oxidation levels, and mechanical properties were measured. In both series, many liners were retrieved for dislocation. Wear/osteolysis was the most common reason for retrieval in the Hylamer series, while none of the conventional polyethylene liners were retrieved for this reason. Nearly all liners exhibited abrasion, burnishing, scratching, and creep. The Hylamer liners had more cracking, delamination, and pitting. The Hylamer liners had an average linear wear rate of 0.32 mm/year, while the conventional polyethylene liners had an average wear rate of 0.20 mm/year. Due to sample size, no statistical difference in wear rate was noted between the two groups. In general, both the Hylamer and conventional polyethylene showed oxidation peaks subsurface, resulting from their exposure to gamma radiation in air. Liners with elevated oxidation had decreased ultimate tensile strength, elongation, and toughness. For given oxidation levels, the corresponding mechanical properties of Hylamer appeared lower than those of conventional polyethylene. The ultimate tensile strength values ranged from 14 to 33 MPa for Hylamer and 19 to 32 MPa for conventional polyethylene. Elongation ranges were 19% to 350% (Hylamer) and 80% to 375% (conventional). The Hylamer retrievals in this study gave initial indications of performance; Hylamer appeared to behave similarly, but not superiorly, to conventional polyethylene, in the early functional period with respect to clinical wear and clinical performance. Both Hylamer and conventional polyethylene liners were degraded by gamma sterilization in air, with Hylamer liners demonstrating greater property changes.

Biomechanical evaluation of anterior cervical spine stabilization.

STUDY DESIGN: An in vitro biomechanical study. OBJECTIVES: To simulate a severe compressive flexion injury for determination of the relative stability of different anterior instrumentation systems in a porcine model and to validate this model in human cadaveric specimens. SUMMARY OF BACKGROUND DATA: Anterior plate fixation is useful for high-grade mechanical insufficiency of the cervical spine and may prevent the need for a second procedure. METHODS: The cervical spines of 45 porcine and 12 cadaveric specimens were subjected to nondestructive flexion, lateral bending, and torsional testing on a modified universal testing machine. A corpectomy was performed with release of the posterior ligamentous structures. The specimens were stabilized with one of three anterior plate constructs. The nondestructive testing was repeated to evaluate structural stability (stiffness and neutral zone). Finally, destructive testing examined failure moment, energy to failure, and mechanism of failure. RESULTS: The instrumented specimens had flexural and lateral bending and torsional stiffness values that were similar to or greater than those of their paired intact specimens. The cervical spine locking plate had a significantly higher flexural stiffness ratio (plated:intact), torsional stiffness ratio, lower flexural neutral zone ratio, higher failure moment, and higher energy to failure than did the Caspar plate. CONCLUSIONS: The cervical spine locking plate is theoretically safer than the Caspar system because the posterior vertebral body cortex is not breached by the fixation screws, and the screws are less likely to back out anteriorly and irritate the esophagus. According to these results, the cervical spine locking plate system is biomechanically equivalent to and in some cases more stable than the Caspar system for fixation of a severe compressive flexion injury.