The diagnostic accuracy of cone beam computed tomography in detecting temporomandibular joint bony disorders: a systematic review.

Computed tomography (CT) has been recognized as a robust and dependable technique for delineating osseous alterations and anomalies within hard tissues. The necessity for accurate diagnosis and management of patients with temporomandibular disorders in dental practices has increasingly come to the forefront. There is ongoing scholarly debate regarding the equivalence of diagnostic outcomes yielded by cone beam computed tomography (CBCT), which offers greater accessibility in dental settings than traditional CT, in identifying bony changes within the temporomandibular joint (TMJ). Our principal aim was to conduct a systematic review of studies that compare the efficacy of CT and CBCT in the detailed assessment of bone conditions affecting the TMJ. An electronic search was conducted across databases: PubMed, Medline, Web of Science, Cochrane and Scopus. Two independent reviewers screened titles and abstracts against predefined inclusion criteria. The included articles underwent rigorous critical appraisal, during which relevant data were extracted and systematically presented in a tabular format. This systematic review incorporates 5 studies published between 2006 and 2015. In 3 studies, CBCT demonstrated comparable outcomes to CT, while 2 investigations revealed significantly enhanced accuracy for CBCT compared to CT, with reported accuracies of 0.95 ± 0.04, 0.77 ± 0.17, and 89-91% for CBCT. The aggregated evidence from the included studies indicates that CBCT offers comparable or superior accuracy in detecting osseous changes within TMJ structures. Owing to its lower radiation exposure and increased accessibility, CBCT emerges as the preferred choice over conventional CT for evaluating bony structures of the TMJ.

Enhanced Recovery of Local Anesthesia in Pediatric Patients: The Impact of Photobiomodulation on Reversing Anesthesia Effects.

BACKGROUND The split-mouth study design is used in oral health research and usually consists of 2 treatments randomly assigned to either the right or left side. This split-mouth study aimed to evaluate the efficacy of photobiomodulation on reversal of local anesthesia in 50 children aged 8-10 years. MATERIAL AND METHODS The study was conducted among 50 children: 27 girls and 23 boys, aged 8-10 years (mean age 9.38±1.15 years), who presented 2 carious maxillary permanent molars. One side was randomly assigned to the laser group (50 teeth), and the contralateral side to the control group (50 teeth). At the end of the treatment, photobiomodulation (PBM) was performed in the area of infiltration at 6 points, with 635 nm (25 children) (250 mW, 500 mW/cm², 15J) and 808 nm (25 children) (200 mW, 400 mW/cm², 12J) (SmartM PRO, Lasotronix, Poland). On the contralateral side, the laser's off-mode applicator was used. Anesthetic effect was evaluated by palpation test (soft tissues) and electrical test (dental pulp). RESULTS After 15 minutes, in the laser group the return to normal sensations in the palpation test showed 88% (808 nm) and 68% (635 nm), and only 20% in the control group (P=0.04123). After 45 minutes, all the participants from the PBM group returned to normal sensations (P=0.21458). Dental pulp's excitability threshold was lower for both wavelengths compared to the control group (P=0.000001). CONCLUSIONS The identification of factors accelerating the recovery time to normal function, such as PBM, can be used as important data to eliminate self-injury secondary to local anesthesia (LA) in children.

Evaluation of photobiomodulation for postoperative discomfort following laser-assisted vital pulp therapy in immature teeth: A preliminary retrospective study.

BACKGROUND: Minimally invasive endodontics is recommended for young, immature teeth to preserve healthy pulp and dentin tissue. OBJECTIVES: The aim of the study was to examine the cold sensitivity of immature teeth that received photobiomodulation (PBM) after vital pulp therapy (VPT). MATERIAL AND METHODS: The study followed the STROBE guidelines and included 123 healthy patients aged 8-13. The immature teeth (incisors, premolars and molars) that qualified for VPT received the bioceramic material - Biodentine. In this experiment, teeth were treated immediately and at 24 h post-VPT with a 635-nm diode laser using a power of 100 mW, a power density of 200 mW/cm2 and a total energy of 4 J (PBM group, n = 43), while those not treated were the control group (n = 43). The tooth sensitivity to cold was measured using a visual analogue scale (VAS) before and at 6 h, 1 day, 7, 30, and 90 days after treatment. The predictor variable was PBM skills regarding the ability to decrease cold sensitivity after VPT. The primary endpoint was the time to reverse hypersensitivity to cold, and the secondary endpoint was the occurrence of possible side effects. The Mann-Whitney U test, Friedman test along with Dunn's post hoc test, and the χ2 test were used to investigate tooth sensitivity. RESULTS: Eighty-six immature permanent teeth of 86 children were included in the study. It was shown that the difference was significant for sensitivity to a cold stimulus between the groups at 6 h, 24 h, 7 days, and 30 days, but no difference was found preoperatively and at 90 days (6 h, 24 h, 7 days, and 30 days, p < 0.001, and 90 days, p = 0.079). However, patients in both groups reported a decrease in discomfort provoked by cold stimuli throughout the follow-up period. CONCLUSIONS: Photobiomodulation decreased postoperative sensitivity and was more acceptable for patients. Further randomized clinical studies with placebo-controlled groups are needed.

Comparison of Bond Strength of Orthodontic Brackets Onto the Tooth Enamel of 120 Freshly Extracted Adult Bovine Medial Lower Incisors Using 4 Adhesives: A Resin-Modified Glass Ionomer Adhesive, a Composite Adhesive, a Liquid Composite Adhesive, and a One-Step Light-Cured Adhesive.

BACKGROUND This study aimed to compare the bond strength of orthodontic brackets onto the tooth enamel of 120 freshly extracted adult bovine medial lower incisors using 4 adhesives: a resin-modified glass ionomer adhesive, a composite adhesive, a liquid composite adhesive, and a one-step light-cured adhesive. MATERIAL AND METHODS The study group (120 freshly extracted bovine medial lower incisors) was divided into equal subgroups depending on the type of adhesive used to fix the brackets to the tooth enamel (n=30), and then according to the observation time (n=10). Orthodontic brackets were fixed onto the tooth enamel for 24 hours (T1), 3 months (T2), and 6 months (T3) using 4 types of adhesives: resin-modified glass ionomer adhesive Fuji Ortho LC, composite adhesive Transbond Plus Light Cure Band, flowable composite adhesive Transbond Supreme Low Viscosity, and a one-step light-cured adhesive GC Ortho Connect. Shear tests and fracture plane analyses were performed. RESULTS Statistically significant differences at time T1 were noted in the comparison of shear stress values when brackets were fixed with GC Ortho Connect adhesive compared to other adhesives (P<0.05), except for the Transbond Plus adhesive (P>0.05). At time T3, significant statistical differences occurred between GC Fuji Ortho LC and the other 3 adhesives (P<0.05). The fracture analysis showed that, regardless of the time function, adhesive-cohesive fractures without damage to the enamel were the most common for all the assessed materials. CONCLUSIONS Of the adhesives evaluated, GC Ortho Connect appears to be the most appropriate choice for bonding orthodontic brackets to the enamel surface.

Assessing Fluorosis Incidence in Areas with Low Fluoride Content in the Drinking Water, Fluorotic Enamel Architecture, and Composition Alterations.

There is currently no consensus among researchers on the optimal level of fluoride for human growth and health. As drinking water is not the sole source of fluoride for humans, and fluoride can be found in many food sources, this work aimed to determine the incidence and severity of dental fluorosis in Poland, in areas where a low fluoride content characterizes the drinking water, and to assess the impact of fluoride on the enamel composition and microstructure. The dental examination involved 696 patients (aged 15−25 years) who had since birth lived in areas where the fluoride concentration in drinking water did not exceed 0.25 mg/L. The severity of the condition was evaluated using the Dean's Index. Both healthy teeth and teeth with varying degrees of fluorosis underwent laboratory tests designed to assess the total protein and fluoride content of the enamel. Protein amount was assessed spectrophotometrically while the level of fluoride ions was measured by DX-120 ion chromatography. The clinical study revealed 89 cases (12.8%) of dental fluorosis of varying severity. The enamel of teeth with mild and moderate fluorosis contained a significantly higher protein (p-value < 0.001 and 0.002, respectively) and fluoride level (p < 0.001) than those with no clinical signs of fluorosis. SEM images showed irregularities in the structure of the fluorotic enamel. An excessive fluoride level during amelogenesis leads to adverse changes in the chemical composition of tooth enamel and its structure. Moreover, dental fluorosis present in areas where drinking water is low in fluorides indicates a need to monitor the supply of fluoride from other possible sources, regardless of its content in the water.

Assessment of the Socioeconomic Status and Analysis of the Factors Motivating Patients to Apply for Prosthetic Treatment by Students of Dentistry at the Poznan University of Medical Sciences.

This study aimed to determine the motives for undertaking prosthetic treatment at the Prosthetics Clinic of the Poznan University of Medical Sciences (PUMS), pursued by fifth- and sixth-year medicine and dentistry students. The survey consisted of 18 questions, of which 1 to 11 concerned general patient data, while questions 12 to 18 concerned prosthetic treatment. The only open question in the questionnaire was one regarding the motives for the decision to receive treatment. The study group consisted of 153 patients (102 women-66.67% and 51 men-33.33%) of the Prosthetic Clinic. After collecting a total of 200 questionnaires, rejecting 47 (23.50%) due to the lack of answers to all questions (other than question 18), a total of 153 completed (76.50%) questionnaires were obtained. The main motivating factors for patients to undertake prosthetic treatment are functional and aesthetic considerations. In addition, it turned out, that the authority of the university unit is of greater importance than financial issues. Additionally, some patients undergo treatment by students because they can see positive aspects in it, both for them and for students. Hence, the evaluation of the treatment provided by students, as well as their communication skills and their attitude, are rated very highly, although, again, the evaluation was influenced by the education level.

Symptoms of the Eruption of Permanent Teeth.

This prospective study examined a population of 520 urban and rural children aged 5 to 9 years. Every 2−4 weeks, the clinical symptoms accompanying primary tooth replacement such as a cough, a runny nose, pain, and body temperature were assessed in each child's medical records. The authors were able to show in a statistically significant manner that the frequency, time, and type of cough were strongly related to the type of erupting teeth (p < 0.001 for each relationship). A cough dependent on the type of erupting teeth was observed in 86% to 92% of the examined children, with a morning bronchial cough being connected with an eruption of the lower teeth, and an eruption of the upper teeth producing an all-day pharyngeal cough caused by mucus secretions dripping down the back of the throat. A statistically significant relationship was also confirmed between the type of erupting teeth and the incidence of a runny nose (p < 0.001), the frequency of a runny nose (p < 0.001), and the time when runny nose symptoms occurred (p < 0.001). This study shows that the period when primary dentition is replaced with permanent teeth in children is characterized by a physiological cough and a runny nose.

Gender-Related Biomechanical Properties of Masseter Muscle among Patients with Self-Assessment of Bruxism: A Comparative Study.

It seems extremely important to know the biomechanical properties of the orofacial tissues among patients with increased activity of masticatory muscles, such as bruxism. The aim of this study was to evaluate biomechanical properties of the masseter muscle by using MyotonPRO in adults with probable bruxism and to define gender relations. This study was conducted in the Temporomandibular Disorders Department at Poznan University of Medical Sciences, Poland (June 2021-November 2021) among patients that reported bruxism symptoms The patients underwent a clinical examination, then the biomechanical properties of the masseter muscles were assessed. The MyotonPro measured masseter tone, stiffness and elasticity in 36 patients with a self-assessment of bruxism (18 women and 18 men). Data were collected from relaxed and contracted muscles. In relaxed masseter muscles there were no statistically significant differences between the sexes in muscle tone, stiffness and elasticity. During contraction significant differences were found between the sexes in the tension and the stiffness of the masseter muscles. Moreover, women often experienced headaches in the temporal region and pain in the masseter muscles during palpation. Among patients with a self-assessment of bruxism, accompanying pain was significantly more frequent in women. Male gender was associated with increased muscle tension and stiffness of the contracted masseter muscle.

Comparison of the Effects of Myotherapy in Patients with Myofascial Pain with and without Self-Reported Sleep Bruxism Using The Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) Axis I Questionnaire.

BACKGROUND This study aimed to compare the effects of myotherapy using sublingual relaxation splints and stretching exercises in 110 patients with myofascial pain with and without self-reported sleep bruxism using The Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) Axis I Questionnaire. MATERIAL AND METHODS The study involved 110 patients with myofascial pain. The diagnosis was based on the RDC/TMD questionnaire. The number of painful muscle sites (PMS) and the range of maximum mouth opening (MMO) were assessed 2 times - at the first visit and after 3 months. Then, the influence of possible bruxism on the treatment was assessed. RESULTS The mean age of the patients was 26.8 years (SD 5.4); 89% of the subjects were women; and 60.9% of the patients reported bruxism. Each patient was instructed to perform muscle stretching at the first visit and after 1 week all patients received a sublingual relaxation splint. The number of PMS decreased and the range of MMO increased in both groups after a period of 3 months of treatment (P<0.05). Significant differences were observed in the obtained treatment effects between the patients with and without possible bruxism. CONCLUSIONS This study evaluated the effectiveness of the sublingual relaxation splint and stretching exercises in patients with myofascial pain. Patients at a single center in Poland who reported myofascial pain that was not associated with self-reported sleep bruxism had a significantly better response to myotherapy when compared to patients with self-reported sleep bruxism.

Polymorphic variants in genes related to stress coping are associated with the awake bruxism.

BACKGROUND: Chronic stress is one of the leading predisposing factors in bruxism aetiology, but the influence of genetic factors is also suggested. We aimed to study whether sequence variants in genes involved in stress regulation pathways: NTRK2 and BDNF, may be associated with awake bruxism susceptibility, clinical presentation, and patients' perceived stress level. METHODS: The study group included 104 patients with probable awake bruxism and 191 population controls. Patients underwent dental examination concerning the symptoms of bruxism and psychological testing. Genotyping was performed using HRMA and sequencing. Statistical analyses were conducted, and P values below 0.05 were considered statistically significant. RESULTS: We observed a positive correlation of measured stress level and pathological teeth attrition in the anterior segment (r = 0.45, P < 0.001), enamel attritions (r = 0.44, P < 0.001), tongue impressions (r = 0.50, P < 0.001) and posterior teeth attrition (r = 0.27, P = 0.005). Moreover, the c.196A variant (p.66Met) of the BDNF gene and c.1397-31392G allele of the NTRK2 gene were present with elevated frequency, comparing to controls. CONCLUSIONS: This study hence the thesis that perceived stress level is a substantial contributing factor to awake bruxism occurrence and its clinical manifestations. Moreover, sequence variants in genes related to stress coping may be correlated with awake bruxism's susceptibility via elevated perceived stress level.

Management of the Oral Health of Children During the COVID-19 Pandemic in Poland.

Managing the oral health of children during the time of a health emergency linked to the current COVID-19 pandemic presents specific problems. A high number of non-specific effective infection control protocols are available in dental settings. It is of fundamental importance to implement specific protocols relating to those clinical situations that normally do not represent an emergency but which now fall into that category. The aim of this study was the comparison of data obtained from the Regional National Health Fund (NFZ) relating to the number and the type of procedures in the oral health management of children aged 0-18 years from the Wielkopolska region, with the months of March and April of 2019 being compared with those of the, respective, pandemic period of 2020. The results showed statistical differences in the number of performed procedures when comparing 2019 and 2020; especially in April (n = 53,077 in 2019 but only n = 2,287 in 2020), when lockdown restrictions reached their highest level and when only 30% of the dental clinics for children were open for patients in the Wielkopolska region of Poland. Regarding surgical cases, there were no differences in percentage frequency between April 2019 and 2020 in terms of extractions. However, an increase was observed in abscess incisions (3.5-17.8%) and surgical dressings (1.5-10.07%). There was a decrease in the total number of performed conservative dentistry procedures in April 2020, but temporary fillings in primary and permanent teeth showed a prominent increase: from 6.4% in 2019 to 19.3% in 2020; and 5.8-11.4%, respectively. Pulp treatment and mucosal lesions therapy fall into the dental emergency category during this COVID-19 pandemic. These cases have shown an increase from 3.2% in 2019 to 12.8% in 2020 for pulp treatment, and from 2.3 to 4.3% for the treatment of oral mucosal lesions. As suspected, after the lockdown was implemented, the number of pediatric dental cases were low. Moreover, the analysis revealed differences in the profile of clinical situations that represented the emergency cases and the pandemic treatment protocols. Future implications suggest that dental prophylactic procedures be included in pandemic protocols with even dental services being limited to a form of urgent treatment. New approaches and treatment models should be implemented in the control of the infectious spread of the disease in the management of the oral health of children in this pandemic period.

Standardization of the ultrasound examination of the masseter muscle with size-independent calculation of records.

BACKGROUND: As ultrasonography provides objective parameters and values, it is a reliable method of examining the structure and dimensions of the masseter muscle. Although the method is well known, there is no standardization in clinical examination and data analysis yet. OBJECTIVES: The study aimed to measure masseter muscle thickness in designated areas to establish the most repeatable and clinically applicable method of ultrasound examination, and to assess differences in measurements in designated areas for clinical purposes by devising the size-independent parameter. The size-independent parameter may potentially be more clinically applicable than distance records, which are affected by the size of the subject. MATERIAL AND METHODS: An ultrasound examination of 124 masseter muscles was performed. Axial examination in 3 horizontal regions (lower, middle and upper) and coronal examination in 2 vertical regions (proximal and distal) was carried out. Masseter muscle thickness was measured in every designated area when relaxed (muscle at rest (RMT)) and with clenched teeth (contracted muscle (CMT)). A morphological independent functional index of thickness difference (FITD) was calculated. RESULTS: The study revealed very high statistical differences between RMT and CMT (p < 0.0001) in all designated areas but with location variations. Masseter muscle thickness significantly differed depending on the examined area and transducer projection. CONCLUSIONS: The ultrasound study showed that masseter muscle thickness significantly differs depending on the examined area. The authors emphasize the necessity to examine the masseter muscle in specified areas with both coronal and axial projections to achieve objective and repeatable examination. Notable clinical value is assigned to FITD, which is independent from the morphological dimensions of the muscle.

Sexual dimorphism of maxillary sinuses in children and adolescents - A retrospective CT study.

BACKGROUND: In the postnatal period, some sexual dimorphism is observed from the moment of birth, but it is most pronounced from puberty. The aim of the study based on CT images was to assess possible sexual dimorphism of the maxillary sinus in children aged 0-18. METHODS: The retrospective analysis of CT images of the head (assessed as normal by radiologists) of 170 patients aged 0-18 (85 females and 85 males) was performed. The maxillary sinuses of every patient were bilaterally measured in three planes. Three diameters were obtained: maximum transverse (horizontal) diameter (the maxillary sinus width, MSW); maximum vertical diameter (the maxillary sinus height, MSH) and maximum antero-posterior diameter (maxillary sinus length, MSL). The automatic CT image segmentation algorithm was used (Syngo Via for Oncology, Siemens) to establish maxilla retrospective analysis of CT images of the head (assessed as normal by radiologists) of 170 patients aged 0-18 (85 females and 85 males) was performed. The maxillary sinuses of every patient were bilaterally measured in three planes. Three diameters were obtained: maximum transverse (horizontal) diameter (the maxillary sinus width, MSW); maximum vertical diameter (the maxillary sinus height, MSH) and maximum antero-posterior diameter (maxillary sinus length, MSL). The automatic CT image segmentation algorithm was used (Syngo Via for Oncology, Siemens) to establish maxillary sinus volume (MSV). The coefficient of variation used in the study allowed the biological variation between sexes to be observed. RESULTS AND CONCLUSIONS: The sexual dimorphism of maxillary sinus parameters is variable and depends on the phase of ontogenesis. All investigated parameters of maxillary sinuses are larger in males at 2-3 years (except for the length, which is larger in females by the end of three years, between six and nine years and after 15 years). The sexual dimorphism is less evident during the first year of age, and the most evident between 15 and 16 years. During the first two years, females are dominant with all parameters being larger than in males. The maxillary sinus length is developmentally the most stable parameter of maxillary sinuses, because throughout the investigated ontogenesis, the sexual differences are very similar. The most evident sexual dimorphism is observed in the volume of the maxillary sinus.

Psychosocial Predictors of Bruxism.

OBJECTIVES: The study aimed to investigate the psychosocial predictors of bruxism. The association of various psychosocial factors such as alexithymia, emotional processing, state and trait anxiety, and stress with awake bruxism was analysed. METHODS: The study involved 52 volunteers diagnosed with awake bruxism. The toolkit that was used included the Toronto Alexithymia Scale (TAS-20), the Emotional Processing Scale (EPS), the Cohen Perceived Stress Scale (PSS-10), and the State- and Trait-Anxiety Inventory (STAI), with independent individual psychological diagnoses being made for every patient. The results were statistically analysed using IBM SPSS Statistics 24. RESULTS: The obtained data clearly show that psychological traits-both permanent dispositions (e.g., state anxiety and alexithymia) and temporary states (e.g., trait anxiety, emotional processing deficits, and psychological stress)-are significant determinants of awake bruxism. The percentage of explained variance indicates the presence of other factors as well. CONCLUSIONS: Psychosocial factors such as state anxiety and trait anxiety, alexithymia, and perceived stress are as important as somatic causes in the occurrence and maintenance of awake bruxism. The profile of the obtained data suggests the possibility of preventing or minimizing the symptoms of awake bruxism through properly constructed psychoprophylactic interactions.

Computed Tomography versus Optical Scanning: A Comparison of Different Methods of 3D Data Acquisition for Tooth Replication.

OBJECTIVES: The study aimed to compare the accuracy of different methods of data acquisition and data reconstruction and to assess their usefulness for 3D printing of tooth replicas. METHODS: 3-dimensional models of molar and canine teeth obtain utilizing CBCT examination with different protocols, and optical scanning was compared with models derived from micro-computed (micro-CT) examination using Geomagic Studio Qualify software. A pairwise comparison of 3D models with analysis of standard deviation and the value of the mean distance of given surfaces was performed. RESULTS: Standard deviation and the value of the mean distance were lowest for optical scanning followed by CBC in high and standard resolution in all tested protocols. Models, obtained with high-resolution CBCT protocols, of teeth in and outside of alveolar bone showed similar average distance parameters, but standard deviation parameter was significantly lower for models of teeth scanned outside of the socket. Good surface representation on all models was seen at relatively smooth areas while in areas of high changes in the geometry CBCT based models performed inferiorly to those obtained from an optical scanner. CONCLUSIONS: In case of teeth of noncomplicated texture, independently from a position (within or outside the alveolar socket), the high-resolution CBCT seems to be a sufficient method to obtain data for 3D printed tooth replica. Optical scanning performs better when a detailed replica is necessary.

A Comparison between the Implant Stability Quotient and the Fractal Dimension of Alveolar Bone at the Implant Site.

OBJECTIVES: Fractal analysis of the radiographic pattern of bone has been used to evaluate its quantitative properties. However, the relation between initial implant stability and quality of bone remains unclear. The objective of this study was to evaluate RFA values in relation to the fractal dimension of bone where the implant was inserted. MATERIAL AND METHODS: A total of 50 two-stage dental implants were placed in the maxilla and mandible of 32 patients. After implant placement, an implant stability quotient (ISQ) was measured in two perpendicular planes. On intraoral digital periapical radiographs, three 35x35 pixels' regions of interest (ROIs) were chosen covering the bone adjacent to the neck (ROI 1), middle (ROI 2), and apical (ROI 3) part of the implant, respectively. For every ROI, a fractal dimension (FD) was calculated. A linear correlation, as well as a logistic regression analysis, was used to identify a possible relation between the ISQ and FD values for every ROI in the maxilla and mandible. RESULTS: The ISQ and FD values were found to be correlated at ROI 1 for the maxilla. There was no linear correlation between ISQ and FD values in any of the three ROIs in the mandible. However, logistic regression analysis showed that in ROI 1 and ROI 3 the values of FD and ISQ are statistically important and may be used to express the difference between maxilla and mandible. CONCLUSION: The fractal dimension of alveolar bone measured from intraoral digital radiographs alone may be an insufficient parameter to determine initial implant stability.

The Association between Maxillary Sinus Dimensions and Midface Parameters during Human Postnatal Growth.

OBJECTIVE: The aim of the study based on CT images was to assess the age-related changes in maxillary sinus diameters in relation to diameters of the facial skeleton. MATERIALS AND METHODS: The retrospective analysis of CT images of the head of 170 patients aged 0-18 years (85 females and 85 males) was performed. Specific orientation points (zy, zm, pr, ns, n, and P) were identified in every patient and the following distances were measured: zy-zy, maximum facial width; zm-zm, midfacial width; n-pr, upper facial height; ns-pr, alveolar facial height; and ns-P, distance not indicated in craniometry. RESULTS: The maxillary sinuses of every patient were bilaterally measured in three planes. Three diameters were obtained: maximum transverse (horizontal) diameter called MSW, maximum vertical diameter called MSH, and maximum anteroposterior diameter (length) called MSL. In females, the correlation of MSW, MSH, and MSL and zy-zy, as well as n-pr distances, is very strong. Moreover, the significant correlation was found between all measurements of maxillary sinus and ns-pr as well as ns-P distances in females. The correlation between MSL and all measurements of midface as well as MSH and MSW and all measurements except ns-P is stronger in females than in males. In males, all measurements of maxillary sinus correlate with ns-P distance very strongly. CONCLUSIONS: The statistical analysis (correlation and determination coefficient) showed that all measurements of maxillary sinuses correlate with midface dimensions.

Ultrasonography in the Diagnosis of Temporomandibular Disorders: A Meta-Analysis.

BACKGROUND The increased prevalence of temporomandibular disorders (TMDs) requires searching for new, easily accessible diagnostic methods. In addition to routine clinical examination, various methods of imaging temporomandibular joints are available, such as magnetic resonance imaging, computed tomography scans, or scintigraphy. Ultrasound imaging, due to short examination time, low cost, and non-invasiveness, should be recommended as a routine diagnostic procedure. The aim of the study was to investigate whether ultrasound imaging can be used in the diagnosis of temporomandibular joint disorders. MATERIAL AND METHODS Publications during the period 2006 to March 2017 from the US National Library of Medicine database were selected for analysis by entering the terms "ultrasonography", "ultrasound", "USG", "temporomandibular joint", "TMJ", "temporomandibular disorders", and "TMD". Papers were chosen if they met the required criteria relating to the sensitivity, specificity, accuracy, positive predictive value, and negative predictive value of this diagnostic technique with regard to imaging articular disc displacement, joint effusion, and condylar abnormalities. RESULTS The search yielded 1883 publications, of which 8 were selected that met the criteria for inclusion in the analysis. For articular disc displacement examinations, the following results were obtained: sensitivity 75.6%; specificity 69.1%; accuracy 76.1%; positive predictive value 72.2%; negative predictive value 65.6%. When the examinations of joint effusion and condylar abnormalities were included, the results were respectively 66.9%; 70.8%; 69.9%; 75.8%; and 62.4%. CONCLUSIONS The use of ultrasonography in the diagnosis of temporomandibular disorders requires standardizing the method as well as further research to confirm its effectiveness.

Introducing a simple method of maxillary sinus volume assessment based on linear dimensions.

Measuring sinus volume in a general practice clinic is a complex and time-consuming procedure, requiring experience in the use of radiological methods In the presented research, the automatically estimated maxillary sinus volume was compared with maxillary sinus volume assessed with mathematical formulas used to calculate the volume of spheres and pyramids. The starting point for the statistical analysis were specific measurements of the sinuses. We wanted to discover which geometric shape has the volume that is nearest to the automatically estimated volume. The study was performed using samples of CT scans of pediatric patients age 1-17. The dimensions (maximal width, maximal height, maximal length) were used for manual calculations. For the automatic volume calculation, the CT Image Segmentation algorithm (Syngo Via for Oncology, Siemens) was used. Pearson's correlation coefficient was applied to analyse the interrelationship between automatically and manually calculated volume of maxillary sinus. It was statistically established that the "sphere", "pyramid" and "mean" manually calculated maxillary sinus volume were accurate and strongly correlated with the automatically estimated maxillary sinus volume. The volume of the sphere corresponds better with the automatic measurements than the volume of the pyramid. The variations are significant and they were made reliable with the application of a statistical test. It is quick and easy to calculate the maxillary sinus volume based on its linear dimensions instead of applying advanced software. The manual method for maxillary sinus volume calculation requires three linear measurements of the sinus (length, width, and height) and can be recommended if the automatically estimated volume cannot be obtained.

Maxillary sinuses and midface in patients with cleidocranial dysostosis.

The cleidocranial dysplasia is general skeletal disorder with an autosomal dominant inheritance. It is manifested by many craniofacial abnormalities, of which the maxillary hypoplasia is the most evident. The aim of the study was to use CBCT to evaluate the volume of the maxillary sinuses and the dimensions of maxillae in patients with CCD and compare them with healthy individuals. Files of four children with cleidocranial dysplasia were investigated. Volume of every maxillary sinus as well as two dimensional measurements of distances between particular points of interest located on surface of maxilla were calculated from reconstructed CBCT examination. Data were compared with a control group. Statistical analysis was performed. Linear and volumetric data obtained using CBCT was collected and compared with a control group. All affected children had both maxillary sinus volume and maxillary dimensions smaller than control values. The maxillary sinuses were underdeveloped up to half of normal values. The largest differences were recorded in vertical linear dimensions of the maxillae. Horizontal dimensions were also lower. There are morphological modifications of bone tissue which accompany CCD. It seems that these changes occur on the midfacial region and to a greater extent concern the maxillary sinus volume.