Hsp90 protein in fission yeast Swo1p and UCS protein Rng3p facilitate myosin II assembly and function.

The F-actin-based molecular motor myosin II is involved in a variety of cellular processes such as muscle contraction, cell motility, and cytokinesis. In recent years, a family of myosin II-specific cochaperones of the UCS family has been identified from work with yeasts, fungi, worms, and humans. Biochemical analyses have shown that a complex of Hsp90 and the Caenorhabditis elegans UCS domain protein UNC-45 prevent myosin head aggregation, thereby allowing it to assume a proper structure. Here we demonstrate that a temperature-sensitive mutant of the fission yeast Hsp90 (Swo1p), swo1-w1, is defective in actomyosin ring assembly at the restrictive temperature. Two alleles of swo1, swo1-w1 and swo1-26, showed synthetic lethality with a specific mutant allele of the fission yeast type II myosin head, myo2-E1, but not with two other mutant alleles of myo2 or with mutations affecting 14 other genes important for cytokinesis. swo1-w1 also showed a strong genetic interaction with rng3-65, a gene encoding a mutation in the fission yeast UCS domain protein Rng3p, which has previously been shown to be important for myosin II assembly. A similar deleterious effect was found when myo2-E1, swo1-w1, and rng3-65 were pharmacologically treated with geldanamycin to partially inhibit Hsp90 function. Interestingly, Swo1p-green fluorescent protein is detected at the improperly assembled actomyosin rings in myo2-E1 but not in a wild-type strain. Yeast two-hybrid and coimmunoprecipitation analyses verified interactions between Rng3p and the myosin head domain as well as interactions between Rng3p and Swo1p. Our analyses of Myo2p, Swo1p, and the UCS domain protein Rng3p establish that Swo1p and Rng3p collaborate in vivo to modulate myosin II function.

EPR and X-ray crystallographic characterization of the product-bound form of the MnII-loaded methionyl aminopeptidase from Pyrococcus furiosus.

Methionine aminopeptidases (MetAPs) are ubiquitous metallohydrolases that remove the N-terminal methionine from nascent polypeptide chains. Although various crystal structures of MetAP in the presence of inhibitors have been solved, the structural aspects of the product-bound step has received little attention. Both perpendicular- and parallel-mode electron paramagnetic resonance (EPR) spectra were recorded for the Mn(II)-loaded forms of the type-I (Escherichia coli) and type-II (Pyrococcus furiosus) MetAPs in the presence of the reaction product l-methionine (L-Met). In general, similar EPR features were observed for both [MnMn(EcMetAP-I)]-L-Met and [MnMn(PfMetAP-II)]-L-Met. The observed perpendicular-mode EPR spectra consisted of a six-line hyperfine pattern at g = 2.03 (A = 8.8 mT) with less intense signals with eleven-line splitting at g = 2.4 and 1.7 (A = 4.4 mT). The former feature results from mononuclear, magnetically isolated Mn(II) ions and this signal are 3-fold more intense in the [MnMn(PfMetAP-II)]-L-Met EPR spectrum than in the [MnMn(EcMetAP-I)]-L-Met spectrum. Inspection of the EPR spectra of both [MnMn(EcMetAP-I)]-L-Met and [MnMn(PfMetAP-II)]-L-Met at 40 K in the parallel mode reveals that the [Mn(EcMetAP-I)]-L-Met spectrum exhibits a well-resolved hyperfine split pattern at g = 7.6 with a hyperfine splitting constant of A = 4.4 mT. These data suggest the presence of a magnetically coupled dinuclear Mn(II) center. On the other hand, a similar feature was not observed for the [MnMn(PfMetAP-II)]-L-Met complex. Therefore, the EPR data suggest that L-Met binds to [MnMn(EcMetAP-I)] differently than [MnMn(PfMetAP-II)]. To confirm these data, the X-ray crystal structure of [MnMn(PfMetAP-II)]-L-Met was solved to 2.3 A resolution. Both Mn1 and Mn2 reside in a distorted trigonal bipyramidal geometry, but the bridging water molecule, observed in the [CoCo(PfMetAP-II)] structure, is absent. Therefore, L-Met binding displaces this water molecule, but the carboxylate oxygen atom of L-Met does not bridge between the two Mn(II) ions. Instead, a single carboxylate oxygen atom of L-Met interacts with only Mn1, while the N-terminal amine nitrogen atom binds to M2. This L-Met binding mode is different from that observed for L-Met binding [CoCo(EcMetAP-I)]. Therefore, the catalytic mechanisms of type-I MetAPs may differ somewhat from type-II enzymes when a dinuclear metalloactive site is present.

Characterization of the active site and insight into the binding mode of the anti-angiogenesis agent fumagillin to the manganese(II)-loaded methionyl aminopeptidase from Escherichia coli.

EPR spectra were recorded for methionine aminopeptidase from Escherichia coli (EcMetAP-I) samples (approximately 2.5 mM) to which one and two equivalents of Mn(II) were added (the latter is referred to as [MnMn(EcMetAP-I)]). The spectra for each sample were indistinguishable except that the spectrum of [MnMn(EcMetAP-I)] was twice as intense. The EPR spectrum of [MnMn(EcMetAP-I)] exhibited the characteristic six-line g approximately 2 EPR signal of mononuclear Mn(II) with A(av)((55)Mn)=9.3 mT (93 G) and exhibited Curie-law temperature dependence. This signal is typical of Mn(II) in a ligand sphere comprising oxygen and/or nitrogen atoms. Other features in the spectrum were observed only as the temperature was raised from that of liquid helium. The temperature dependences of these features are consistent with their assignment to excited state transitions in the S=1, 2 ... 5 non-Kramer's doublets, due to two antiferromagnetically coupled Mn(II) ions with an S=0 ground state. This assignment is supported by the observation of a characteristic 4.5 mT hyperfine pattern, and by the presence of signals in the parallel mode consistent with a non-Kramers' spin ladder. Upon the addition of the anti-angiogenesis agent fumagillin to [MnMn(EcMetAP-I)], very small changes were observed in the EPR spectrum. MALDI-TOF mass spectrometry indicated that fumagillin was, however, covalently coordinated to EcMetAP-I. Therefore, the inhibitory action of this anti-angiogenesis agent on EcMetAP-I appears to involve covalent binding to a polypeptide component at or near the active site rather than direct binding to the metal ions.

Function of the signal peptide and N- and C-terminal propeptides in the leucine aminopeptidase from Aeromonas proteolytica.

The leucine aminopeptidase from Aeromonas proteolytica (also known as Vibrio proteolyticus) (AAP) is a metalloenzyme with broad substrate specificity. The open reading frame (ORF) for AAP encodes a 54 kDa enzyme, however, the extracellular enzyme has a molecular weight of 43 kDa. This form of AAP is further processed to a mature, thermostable 32 kDa form but the exact nature of this process is unknown. Over-expression of different forms of AAP in Escherichia coli (with AAP's native leader sequence, with and without the N- and/or C-terminal propeptides, and as fusion protein) has allowed a model for the processing of wild-type AAP to be proposed. The role of the A. proteolytica signal peptide in protein secretion as well as comparison to other known signal peptides reveals a close resemblance of the A. proteolytica signal peptide to the outer membrane protein (OmpA) signal peptide. Over-expression of the full 54 kDa AAP enzyme provides an enzyme that is significantly less active, due to a cooperative inhibitory interaction between both propeptides. Over-expression of AAP lacking its C-terminal propeptide provided an enzyme with an identical kcat value to wild-type AAP but exhibited a larger Km value, suggesting competitive inhibition of AAP by the N-terminal propeptide (Ki approximately 0.13 nM). The recombinant 32 kDa form of AAP was characterized by kinetic and spectroscopic methods and was shown to be identical to mature, wild-type AAP. Therefore, the ease of purification and processing of rAAP along with the fact that large quantities can be obtained now allow new detailed mechanistic studies to be performed on AAP through site-directed mutagenesis.

Kinetic and spectroscopic characterization of the H178A methionyl aminopeptidase from Escherichia coli.

To gain insight into the role of the strictly conserved histidine residue, H178, in the reaction mechanism of the methionyl aminopeptidase from Escherichia coli (EcMetAP-I), the H178A mutant enzyme was prepared. Metal-reconstituted H178A binds only one equivalent of Co(II) or Fe(II) tightly with affinities that are identical to the WT enzyme based on kinetic and isothermal titration calorimetry (ITC) data. Electronic absorption spectra of Co(II)-loaded H178A EcMetAP-I indicate that the active site divalent metal ion is pentacoordinate, identical to the WT enzyme. These data indicate that the metal binding site has not been affected by altering H178. The effect of altering H178 on activity is, in general, due to a decrease in k(cat). The k(cat) value for Co(II)-loaded H178A decreased 70-fold toward MGMM and 290-fold toward MP-p-NA compared to the WT enzyme, while k(cat) decreased 50-fold toward MGMM for the Fe(II)-loaded H178A enzyme and 140-fold toward MP-p-NA. The K(m) values for MGMM remained unaffected, while those for MP-p-NA increased approximately 2-fold for Co(II)- and Fe(II)-loaded H178A. The k(cat)/K(m) values for both Co(II)- and Fe(II)-loaded H178A toward both substrates ranged from approximately 50- to 580-fold reduction. The pH dependence of log K(m), log k(cat), and log(k(cat)/K(m)) of both WT and H178A EcMetAP-I were also obtained and are identical, within error, for H178A and WT EcMetAP-I. Therefore, H178A is catalytically important but is not required for catalysis. Assignment of one of the observed pK(a) values at 8.1 for WT EcMetAP-I was obtained from plots of molar absorptivity at lambda(max(640)) vs pH for both WT and H178A EcMetAP-I. Apparent pK(a) values of 8.1 and 7.6 were obtained for WT and H178A EcMetAP-I, respectively, and were assigned to the deprotonation of a metal-bound water molecule. The data reported herein provide support for the key elements of the previously proposed mechanism and suggest that a similar mechanism can apply to the enzyme with a single metal in the active site.

Structurally distinct active sites in the copper(II)-substituted aminopeptidases from Aeromonas proteolytica and Escherichia coli.

The aminopeptidase from Aeromonas proteolytica (AAP) was titrated with copper, which bound sequentially at two distinct sites. Both the mono- and disubstituted forms of AAP exhibited catalytic hyperactivity relative to the native dizinc enzyme. Monosubstituted AAP exhibited an axial Cu(II) EPR spectrum with slight pH dependence: at pH 6.0 g(parallel) = 2.249, g( perpendicular ) = 2.055, and A(parallel)((63/65)Cu) = 1.77 x 10(-)(2) cm(-)(1), whereas at pH 9.65 g(parallel) = 2.245, g( perpendicular ) = 2.056, and A(parallel)((63/65)Cu) = 1.77 x 10(-)(2) cm(-)(1). These data indicate oxygen and nitrogen ligation of Cu. AAP further substituted with copper exhibited a complex signal with features around g approximately 2 and 4. The features at g approximately 4 were relatively weak in the B(0) perpendicular B(1) (perpendicular) mode EPR spectrum but were intense in the B(0) parallel B(1) (parallel) mode spectrum. The g approximately 2 region of the perpendicular mode spectrum exhibited two components, one corresponding to mononuclear Cu(II) with g(parallel) = 2.218, g( perpendicular ) = 2.023, and A(parallel)((63/65)Cu) = 1.55 x 10(-)(2) cm(-)(1) and likely due to adventitious binding of Cu(II) to a site distant from the active site. Excellent simulations were obtained for the second component of the spectrum assuming that two Cu(II) ions experience dipolar coupling corresponding to an inter-copper distance of 5 A with the two Cu(II) g(z)() directions parallel to each other and at an angle of approximately 17 degrees to the inter-copper vector (H = betaB.g(CuA).S(CuA) + betaB.g(CuB).S(CuB) + [S.A.I](CuA) + [S.A.I](CuB) + [S(CuA).J.S(CuB)]; g(parallel(CuA,CuB)) = 2.218, g( perpendicular )((CuA,CuB)) = 2.060; A(parallel(CuA,CuB))((63/65)Cu) = 1.59 x 10(-)(2) cm(-)(1), J(isotropic) = 50 cm(-)(1), r(Cu)(-)(Cu) = 4.93 A, and chi = 17 degrees ). The exchange coupling between the two copper ions was found to be ferromagnetic as the signals exhibited Curie law temperature dependence. The Cu-Cu distance of approximately 5 A indicated by EPR was significantly higher than the inter-zinc distance of 3.5 A in the native enzyme, and the dicopper species therefore represents a novel dinuclear site capable of catalysis of hydrolysis. In contrast to AAP, the related methionyl aminopeptidase from Escherichia coli (EcMetAP) was found to bind only one Cu(II) ion despite possessing a dinuclear binding site motif. A further difference was the marked pH dependence of the signal in EcMetAP, suggestive of a change in ligation. The structural motifs of these two Cu(II)-substituted aminopeptidases provide important insight into the observed catalytic activity.

Kinetic and structural characterization of manganese(II)-loaded methionyl aminopeptidases.

Manganese(II) activation of the methionyl aminopeptidases from Escherichia coli (EcMetAP-I) and the hyperthermophilic archaeon Pyrococcus furiosus (PfMetAP-II) was investigated. Maximum catalytic activity for both enzymes was obtained with 1 equiv of Mn(II), and the dissociation constants (K(d)) for the first metal binding site were found to be 6 +/- 0.5 and 1 +/- 0.5 microM for EcMetAP-I and PfMetAP-II, respectively. These K(d) values were verified by isothermal titration calorimetry (ITC) and found to be 3.0 +/- 0.2 and 1.4 +/- 0.2 microM for EcMetAP-I and PfMetAP-II, respectively. The hydrolysis of MGMM was measured in triplicate between 25 and 85 degrees C at eight substrate concentrations ranging from 2 to 20 mM for PfMetAP-II. Both specific activity and K(m) values increased with increasing temperature. An Arrhenius plot was constructed from the kcat values and was found to be linear over the temperature range 25-85 degrees C. The activation energy for the Mn(II)-loaded PfMetAP-II hydrolysis of MGMM was found to be 25.7 kJ/mol while the remaining thermodynamic parameters calculated at 25 degrees C are DeltaG+ = 50.1 kJ/mol, DeltaH+ = 23.2 kJ/mol, and DeltaS++ = -90.2 J x mol(-1) x K(-1).

Overexpression and divalent metal binding properties of the methionyl aminopeptidase from Pyrococcus furiosus.

The gene encoding for the methionyl aminopeptidase from the hyperthermophilic archaeon Pyrococcus furiosus (PfMetAP-II; EC 3.4.11.18) has been inserted into a pET 27b(+) vector and overexpressed in Escherichia coli. The new expression system resulted in a 5-fold increase in purified enzyme obtained from a 5 L fermentor growth. The as-purified PfMetAP-II enzyme, to which no exogenous metal ions or EDTA was added, was found to have 1.2 equiv of zinc and 0.1 equiv of iron present by ICP-AES analysis. This enzyme had a specific activity of 5 units/mg, a 60-fold decrease from the fully loaded Fe(II) enzymes. When an additional 2 equiv of Zn(II) was added to the as-purified PfMetAP-II, no activity could be detected. The combination of these data with previously reported whole cell studies on EcMetAP-I further supports the suggestion that the in vivo metal ion for all MetAP's is Fe(II). Both Co(II)- and Fe(II)-loaded PfMetAP-II showed similar substrate specificities to EcMetAP-I. Substrate binding was largely affected by the amino acid in the P1 position and the length of the polypeptide. The substrates MSSHRWDW and MP-p-NA showed the smallest K(m) values while the substrates MGMM and MP-p-NA provided the highest turnover. The catalytic efficiency (k(cat)/K(m)) of PfMetAP-II for MP-p-NA at 30 degrees C was 799 500 and 340 930 M(-1) s(-1) for Co(II)- and Fe(II)-loaded PfMetAP-II, respectively. Maximum catalytic activity was obtained with 1 equiv of Co(II) or Fe(II), and the dissociation constants (K(d)) for the first metal binding site were found to be 50 +/- 15 and 20 +/- 15 nM for Co(II)- and Fe(II)-substituted PfMetAP-II, respectively. Electronic absorption spectral titration of a 1 mM sample of apo-PfMetAP-II with Co(II) provided a dissociation constant of 0.35 +/- 0.02 mM for the second metal binding site, a 17500-fold increase compared to the first metal binding site. The electronic absorption data also indicated that both Co(II) ions reside in a pentacoordinate geometry. PfMetAP-II shows unique thermostability and the optimal temperature for substrate turnover was found to be approximately 85 degrees C at pH 7.5 in 25 mM Hepes and 150 mM KCl buffer. The hydrolysis of MGMM was measured in triplicate between 25 and 85 degrees C at eight substrate concentrations ranging from 2 to 20 mM. Both specific activity and K(m) values increased with increasing temperature. An Arrhenius plot was constructed from the k(cat) values and was found to be linear over the temperature range 25-85 degrees C, indicating that the rate-limiting step in PfMetAP-II peptide hydrolysis does not change as a function of temperature. Co(II)- and Fe(II)-loaded PfMetAP-II have similar activation energies (13.3 and 19.4 kJ/mol, respectively). The thermodynamic parameters calculated at 25 degrees C are as follows: DeltaG++ = 46.23 kJ/mol, DeltaH++ = 10.79 kJ/mol, and DeltaS++ = -119.72 J.mol(-1).K(-1) for Co(II)-loaded PfMetAP; DeltaG++ = 46.44 kJ/mol, DeltaH++ = 16.94 kJ/mol, and DeltaS++ = -99.67 J.mol(-1).K(-1) for Fe(II)-loaded PfMetAP. Interestingly, at higher temperatures (> 50 degrees C), Fe(II)-loaded PfMetAP-II is more active (1.4-fold at 85 degrees C) than Co(II)-loaded PfMetAP-II.

Importance of a myosin II-containing progenitor for actomyosin ring assembly in fission yeast.

An actomyosin-based contractile ring provides the forces necessary for cell cleavage in several organisms [1-3]. Myosin II is an essential component of the actomyosin ring and has also been detected as a "spot" in interphase Schizosaccharomyces pombe cells [4-5]. It is currently unknown if this myosin II-containing spot is important for cytokinesis. In this study, we characterize this myosin II-containing spot using a combination of genetic and cell biological analyses. Whereas myosin II at the actomyosin ring undergoes rapid turnover, myosin II at the spot does not. Maintenance of the myosin II-containing spot is independent of F-actin function. Interestingly, maintenance of this myosin II spot in interphase requires the function of Rng3p, a UCS domain-containing protein, the Caenorhabditis elegans homolog of which has recently been shown to be a cochaperone for myosin II assembly [6]. Disassembly of the spot in interphase prevents actomyosin ring formation in the subsequent mitosis, implying that the spot might represent a progenitor that is important for assembly of the actomyosin ring. Given that mitosis represents a short period of the fission yeast cell cycle, organization of this progenitor structure in interphase might ensure proper assembly of the actomyosin ring and successful cell division.