2,5-Dimethylfuran Production by Catalytic Hydrogenation of 5-Hydroxymethylfurfural Using Ni Supported on Al2O3-TiO2-ZrO2 Prepared by Sol-Gel Method: The Effect of Hydrogen Donors.

5-Hydroxymethylfurfural (5-HMF) has been described as one of the 12 key platform molecules derived from biomass by the US Department of Energy, and its hydrogenation reaction produces versatile liquid biofuels such as 2,5-dimethylfuran (2,5-DMF). Catalytic hydrogenation from 5-HMF to 2,5-DMF was thoroughly studied on the metal nickel catalysts supported on Al2O3-TiO2-ZrO2 (Ni/ATZ) mixed oxides using isopropanol and formic acid (FA) as hydrogen donors to find the best conditions of the reaction and hydrogen donor. The influence of metal content (wt%), Ni particle size (nm), Nickel Ni0, Ni0/NiO and NiO species, metal active sites and acid-based sites on the catalyst surface, and the effect of the hydrogen donor (isopropanol and formic acid) were systematically studied. The structural characteristics of the materials were studied using different physicochemical methods, including N2 physisorption, XRD, Raman, DRS UV-Vis, FT-IR, SEM, FT-IR Pyad, H2-TPD, CO2-TPD, H2-TPR, TEM and XPS. Second-generation 2,5-DMF biofuel and 5-HMF conversion by-products were analyzed and elucidated using 1H NMR. It was found that the Ni0NiO/ATZ3WI catalyst synthesized by the impregnation method (WI) generated a good synergistic effect between the species, showing the best catalytic hydrogenation of 5-HMF to 2,5-DMF using formic acid as a hydrogen donor for 24 h of reaction and temperature of 210 °C with 20 bar pressure of Argon (Ar).

Simple in situ functionalization of carbon nanospheres.

Functionalized carbon nanospheres have been synthesized in situ via a facile chemical vapor deposition strategy, fabricated by the pyrolysis of toluene/ethanol mixtures at different percentages (0, 1, 2, 3, 4, and 5 wt% of ethanol). The as-grown nanospheres have been characterized using transmission electron microscopy, scanning electron microscopy, Raman and Fourier transform infrared spectroscopy, x-ray diffraction, nitrogen adsorption, zeta potential measurements and x-ray photoelectron spectroscopy. Results indicate that the incorporation of ethanol in the precursor solution reflected in the presence of oxygen and hydrogen functional groups, the highest functionalized nanospheres without compromising the morphology of the sample were yielded at 3 wt% concentration. These in situ added functional groups rendered the carbon nanostructures enhancedly dispersible and stable in water, avoiding post-synthesis and harsh chemicals processing; envisaging thus applications of the nanospheres in the biomedical field where hydrophilicity of the nanomaterials is mandatory.

Composites of Anthraquinone Dyes@HKUST-1 with Tunable Microstructuring: Experimental and Theoretical Interaction Studies.

The metal-organic framework (MOF) HKUST-1 was employed as an interaction matrix for fundamental loading studies of anthraquinone dyes. Chosen dyes were alizarin (A), alizarin S (AS), disperse blue 1 (B1), disperse blue 3 (B3), disperse blue 56 (B56) and purpurin (P). All materials were characterized by XRD, FTIR, TGA and SEM. Hence the interaction of dyes with the framework was characterized by theoretical-experimental differential analysis. One-pot loading strategy resulted in more efficient scavenging of dyes, and reached 100 % for B56 using 50 mg L-1 . SEM revealed important microstructural changes, the smaller crystals ranged 0.8-3 µm in size and almost all composite sizes were from this to higher values, reaching 70 µm, with varying shapes. Two composites were larger in size range (about 2500-1000 µm), and were shaped as rods, octahedrons and coffin lids. Indeed, the microstructure could be modulated depending on preparation conditions and type of loaded dye. For the higher loading series, N2 adsorption and XPS experiments were carried on to further evidence dye-MOF interactions. Ab initio prediction of structural properties for A@HKUST-1 and P@HKUST-1 were obtained by means of solid-state CRYSTAL14 code at the PBE0 level of theory. Computed findings evidenced two O→Cu coordinative bonds, one from O-ketone and the other from O-phenolate moiety as main interactions towards CuNET centers.