Exploring the Impact of the HOMO-LUMO Gap on Molecular Thermoelectric Properties: A Comparative Study of Conjugated Aromatic, Quinoidal, and Donor-Acceptor Core Systems.

Thermoelectric materials have garnered significant interest for their potential to efficiently convert waste heat into electrical energy at room temperature without moving parts or harmful emissions. This study investigated the impact of the HOMO-LUMO (H-L) gap on the thermoelectric properties of three distinct classes of organic compounds: conjugated aromatics (isoindigos (IIGs)), quinoidal molecules (benzodipyrrolidones (BDPs)), and donor-acceptor systems (bis(pyrrol-2-yl)squaraines (BPSs)). These compounds were chosen for their structural simplicity and linear π-conjugated conductance paths, which promote high electrical conductance and minimize complications from quantum interference. Single-molecule thermoelectric measurements revealed that despite their low H-L gaps, the Seebeck coefficients of these compounds remain low. The alignment of the frontier orbitals relative to the Fermi energy was found to play a crucial role in determining the Seebeck coefficients, as exemplified by the BDP compounds. Theoretical calculations support these findings and suggest that anchor group selection could further enhance the thermoelectric behavior of these types of molecules.

Thermopower in Underpotential Deposition-Based Molecular Junctions.

Underpotential deposition (UPD) is an intriguing means for tailoring the interfacial electronic structure of an adsorbate at a substrate. Here we investigate the impact of UPD on thermoelectricity occurring in molecular tunnel junctions based on alkyl self-assembled monolayers (SAMs). We observed noticeable enhancements in the Seebeck coefficient of alkanoic acid and alkanethiol monolayers, by up to 2- and 4-fold, respectively, upon replacement of a conventional Au electrode with an analogous bimetallic electrode, Cu UPD on Au. Quantum transport calculations indicated that the increased Seebeck coefficients are due to the UPD-induced changes in the shape or position of transmission resonances corresponding to gateway orbitals, which depend on the choice of the anchor group. Our work unveils UPD as a potent means for altering the shape of the tunneling energy barrier at the molecule-electrode contact of alkyl SAM-based junctions and hence enhancing thermoelectric performance.

An Orthogonal Conductance Pathway in Spiropyrans for Well-Defined Electrosteric Switching Single-Molecule Junctions.

While a multitude of studies have appeared touting the use of molecules as electronic components, the design of molecular switches is crucial for the next steps in molecular electronics. In this work, single-molecule devices incorporating spiropyrans, made using break junction techniques, are described. Linear spiropyrans with electrode-contacting groups linked by alkynyl spacers to both the indoline and chromenone moieties have previously provided very low conductance values, and removing the alkynyl spacer has resulted in a total loss of conductance. An orthogonal T-shaped approach to single-molecule junctions incorporating spiropyran moieties in which the conducting pathway lies orthogonal to the molecule backbone is described and characterized. This approach has provided singlemolecule conductance features with good correlation to molecular length. Additional higher conducting states are accessible using switching induced by UV light or protonation. Theoretical modeling demonstrates that upon (photo)chemical isomerization to the merocyanine, two cooperating phenomena increase conductance: release of steric hindrance allows the conductance pathway to become more planar (raising the mid-bandgap transmission) and a bound state introduces sharp interference near the Fermi level of the electrodes similarly responding to the change in state. This design step paves the way for future use of spiropyrans in single-molecule devices and electrosteric switches.

Large Mechanosensitive Thermoelectric Enhancement in Metallo-Organic Magnetic Molecules.

Organic materials are promising candidates for thermoelectric cooling and energy harvesting at room temperature. However, their electrical conductance (G) and Seebeck coefficient (S) need to be improved to make them technologically competitive. Therefore, radically new strategies need to be developed to tune their thermoelectric properties. Here, we demonstrate that G and S can be tuned mechanically in paramagnetic metallocenes, and their thermoelectric properties can be significantly enhanced by the application of mechanical forces. With a 2% junction compression, the full thermoelectric figure of merit is enhanced by more than 200 times. We demonstrate that this is because spin transport resonances in paramagnetic metallocenes are strongly sensitive to the interaction between organic ligands and the metal center, which is not the case in their diamagnetic analogue. These results open a new avenue for the development of organic thermoelectric materials for cooling future quantum computers and generating electricity from low-grade energy sources.

Contacting individual graphene nanoribbons using carbon nanotube electrodes.

Graphene nanoribbons synthesized using bottom-up approaches can be structured with atomic precision, allowing their physical properties to be precisely controlled. For applications in quantum technology, the manipulation of single charges, spins or photons is required. However, achieving this at the level of single graphene nanoribbons is experimentally challenging due to the difficulty of contacting individual nanoribbons, particularly on-surface synthesized ones. Here we report the contacting and electrical characterization of on-surface synthesized graphene nanoribbons in a multigate device architecture using single-walled carbon nanotubes as the electrodes. The approach relies on the self-aligned nature of both nanotubes, which have diameters as small as 1 nm, and the nanoribbon growth on their respective growth substrates. The resulting nanoribbon-nanotube devices exhibit quantum transport phenomena-including Coulomb blockade, excited states of vibrational origin and Franck-Condon blockade-that indicate the contacting of individual graphene nanoribbons.

Engineering Heat Transport Across Epitaxial Lattice-Mismatched van der Waals Heterointerfaces.

Artificially engineered 2D materials offer unique physical properties for thermal management, surpassing naturally occurring materials. Here, using van der Waals epitaxy, we demonstrate the ability to engineer extremely insulating thermal metamaterials based on atomically thin lattice-mismatched Bi2Se3/MoSe2 superlattices and graphene/PdSe2 heterostructures with exceptional thermal resistances (70-202 m2 K/GW) and ultralow cross-plane thermal conductivities (0.012-0.07 W/mK) at room temperature, comparable to those of amorphous materials. Experimental data obtained using frequency-domain thermoreflectance and low-frequency Raman spectroscopy, supported by tight-binding phonon calculations, reveal the impact of lattice mismatch, phonon-interface scattering, size effects, temperature, and interface thermal resistance on cross-plane heat dissipation, uncovering different thermal transport regimes and the dominant role of long-wavelength phonons. Our findings provide essential insights into emerging synthesis and thermal characterization methods and valuable guidance for the development of large-area heteroepitaxial van der Waals films of dissimilar materials with tailored thermal transport characteristics.

Supramolecular Radical Electronics.

Supramolecular radical chemistry is an emerging area bridging supramolecular chemistry and radical chemistry, and the integration of radicals into the supramolecular architecture offers a new dimension for tuning their structures and functions. Although various efforts have been devoted to the fabrication of supramolecular junctions, the charge transport characterization through the supramolecular radicals remained unexplored due to the challenges in creating supramolecular radicals at the single-molecule level. Here, we demonstrate the fabrication and charge transport investigation of a supramolecular radical junction using the electrochemical scanning tunneling microscope-based break junction (EC-STM-BJ) technique. We found that the conductance of a supramolecular radical junction was more than 1 order of magnitude higher than that of a supramolecular junction without a radical and even higher than that of a fully conjugated oligophenylenediamine molecule with a similar length. The combined experimental and theoretical investigations revealed that the radical increased the binding energy and decreased the energy gap in the supramolecular radical junction, which leads to the near-resonant transport through the supramolecular radical. Our work demonstrated that the supramolecular radical can provide not only strong binding but also efficient electrical coupling between building blocks, which provides new insights into supramolecular radical chemistry and new materials with supramolecular radicals.

Atomically well-defined nitrogen doping for cross-plane transport through graphene heterojunctions.

The nitrogen doping of graphene leads to graphene heterojunctions with a tunable bandgap, suitable for electronic, electrochemical, and sensing applications. However, the microscopic nature and charge transport properties of atomic-level nitrogen-doped graphene are still unknown, mainly due to the multiple doping sites with topological diversities. In this work, we fabricated atomically well-defined N-doped graphene heterojunctions and investigated the cross-plane transport through these heterojunctions to reveal the effects of doping on their electronic properties. We found that a different doping number of nitrogen atoms leads to a conductance difference of up to ∼288%, and the conductance of graphene heterojunctions with nitrogen-doping at different positions in the conjugated framework can also lead to a conductance difference of ∼170%. Combined ultraviolet photoelectron spectroscopy measurements and theoretical calculations reveal that the insertion of nitrogen atoms into the conjugation framework significantly stabilizes the frontier molecular orbitals, leading to a change in the relative positions of the HOMO and LUMO to the Fermi level of the electrodes. Our work provides a unique insight into the role of nitrogen doping in the charge transport through graphene heterojunctions and materials at the single atomic level.

Not So Innocent After All: Interfacial Chemistry Determines Charge-Transport Efficiency in Single-Molecule Junctions.

Most studies in molecular electronics focus on altering the molecular wire backbone to tune the electrical properties of the whole junction. However, it is often overlooked that the chemical structure of the groups anchoring the molecule to the metallic electrodes influences the electronic structure of the whole system and, therefore, its conductance. We synthesised electron-accepting dithienophosphole oxide derivatives and fabricated their single-molecule junctions. We found that the anchor group has a dramatic effect on charge-transport efficiency: in our case, electron-deficient 4-pyridyl contacts suppress conductance, while electron-rich 4-thioanisole termini promote efficient transport. Our calculations show that this is due to minute changes in charge distribution, probed at the electrode interface. Our findings provide a framework for efficient molecular junction design, especially valuable for compounds with strong electron withdrawing/donating backbones.

Controlling Spin Interference in Single Radical Molecules.

Quantum interference (QI) dominates the electronic properties of single molecules even at room temperature and can lead to a large change in their electrical conductance. To take advantage of this for nanoelectronic applications, a mechanism to electronically control QI in single molecules needs to be developed. In this paper, we demonstrate that controlling the quantum interference of each spin in a stable open-shell organic radical with a large π-system is possible by changing the spin state of the radical. We show that the counterintuitive constructive spin interference in a meta-connected radical changes to destructive interference by changing the spin state of the radical from a doublet to a singlet. This results in a significant change in the room temperature electrical conductance by several orders of magnitude, opening up new possibilities for spin interference based molecular switches for energy storage and conversion applications.

Scaling of quantum interference from single molecules to molecular cages and their monolayers.

The discovery of quantum interference (QI) is widely considered as an important advance in molecular electronics since it provides unique opportunities for achieving single-molecule devices with unprecedented performance. Although some pioneering studies suggested the presence of spin qubit coherence and QI in collective systems such as thin films, it remains unclear whether the QI can be transferred step-by-step from single molecules to different length scales, which hinders the application of QI in fabricating active molecular devices. Here, we found that QI can be transferred from a single molecule to their assemblies. We synthesized and investigated the charge transport through the molecular cages using 1,3-dipyridylbenzene (DPB) as a ligand block with a destructive quantum interference (DQI) effect and 2,5-dipyridylfuran (DPF) as a control building block with a constructive quantum interference (CQI) effect using both single-molecule break junction and large area junction techniques. Combined experiments and calculations revealed that both DQI and CQI had been transferred from the ligand blocks to the molecular cages and the monolayer thin film of the cages. Our work introduced QI effects from a ligand to the molecular cage comprising 732 atoms and even their monolayers, suggesting that the quantum interference could be scaled up within the phase-coherent distance.

Engineering Transport Orbitals in Single-Molecule Junctions.

Controlling charge transport through molecules is challenging because it requires engineering of the energy of molecular orbitals involved in the transport process. While side groups are central to maintaining solubility in many molecular materials, their role in modulating charge transport through single-molecule junctions has received less attention. Here, using two break-junction techniques and computational modeling, we investigate systematically the effect of electron-donating and -withdrawing side groups on the charge transport through single molecules. By characterizing the conductance and thermopower, we demonstrate that side groups can be used to manipulate energy levels of the transport orbitals. Furthermore, we develop a novel statistical approach to model quantum transport through molecular junctions. The proposed method does not treat the electrodes' chemical potential as a free parameter and leads to more robust prediction of electrical conductance as confirmed by our experiment. The new method is generic and can be used to predict the conductance of molecules.

Thermoelectric Enhancement in Single Organic Radical Molecules.

Organic thermoelectric materials have potential for wearable heating, cooling, and energy generation devices at room temperature. For this to be technologically viable, high-conductance (G) and high-Seebeck-coefficient (S) materials are needed. For most semiconductors, the increase in S is accompanied by a decrease in G. Here, using a combined experimental and theoretical investigation, we demonstrate that a simultaneous enhancement of S and G can be achieved in single organic radical molecules, thanks to their intrinsic spin state. A counterintuitive quantum interference (QI) effect is also observed in stable Blatter radical molecules, where constructive QI occurs for a meta-connected radical, leading to further enhancement of thermoelectric properties. Compared to an analogous closed-shell molecule, the power factor is enhanced by more than 1 order of magnitude in radicals. These results open a new avenue for the development of organic thermoelectric materials operating at room temperature.

Heteroatom Effects on Quantum Interference in Molecular Junctions: Modulating Antiresonances by Molecular Design.

Controlling charge transport through molecular wires by utilizing quantum interference (QI) is a growing topic in single-molecular electronics. In this article, scanning tunneling microscopy-break junction techniques and density functional theory calculations are employed to investigate the single-molecule conductance properties of four molecules that have been specifically designed to test extended curly arrow rules (ECARs) for predicting QI in molecular junctions. Specifically, for two new isomeric 1-phenylpyrrole derivatives, the conductance pathway between the gold electrodes must pass through a nitrogen atom: this novel feature is designed to maximize the influence of the heteroatom on conductance properties and has not been the subject of prior investigations of QI. It is shown, experimentally and computationally, that the presence of a nitrogen atom in the conductance pathway increases the effect of changing the position of the anchoring group on the phenyl ring from para to meta, in comparison with biphenyl analogues. This effect is explained in terms of destructive QI (DQI) for the meta-connected pyrrole and shifted DQI for the para-connected isomer. These results demonstrate modulation of antiresonances by molecular design and verify the validity of ECARs as a simple "pen-and-paper" method for predicting QI behavior. The principles offer new fundamental insights into structure-property relationships in molecular junctions and can now be exploited in a range of different heterocycles for molecular electronic applications, such as switches based on external gating, or in thermoelectric devices.

Single-atom control of electrical conductance and thermopower through single-cluster junctions.

The control of single atoms offers fundamental insight into understanding the charge transport through single clusters, and the atomic precision of the clusters provides the opportunity to manipulate the charge transport even at the single-atom level. Herein, we designed and investigated the electrical conductance and thermopower of Anderson-type polyoxometalate (POM) clusters with single-atom variation using the scanning tunneling microscopy break-junction (STM-BJ) technique. Our results show the electrical conductance of single clusters can be changed by an order of magnitude by substituting different center-metal atoms, and the electrical conductance of clusters shows different bias-dependence. Furthermore, the Seebeck coefficients of the POM clusters also can be significantly changed by the center-metal atoms. The non-equilibrium quantum transport calculations reveal that the electrostatic potential profile is non-uniformly dependent on the center-metal atoms. This leads to gating of electrical conductance by bias voltage. This supports the tuning of thermopower and bias dependent transmission spectra. This work provides the fundamental understanding of single-atom control of charge transport in POM single-cluster junctions.

Selective Anchoring Groups for Molecular Electronic Junctions with ITO Electrodes.

Indium tin oxide (ITO) is an attractive substrate for single-molecule electronics since it is transparent while maintaining electrical conductivity. Although it has been used before as a contacting electrode in single-molecule electrical studies, these studies have been limited to the use of carboxylic acid terminal groups for binding molecular wires to the ITO substrates. There is thus the need to investigate other anchoring groups with potential for binding effectively to ITO. With this aim, we have investigated the single-molecule conductance of a series of eight tolane or "tolane-like" molecular wires with a variety of surface binding groups. We first used gold-molecule-gold junctions to identify promising targets for ITO selectivity. We then assessed the propensity and selectivity of carboxylic acid, cyanoacrylic acid, and pyridinium-squarate to bind to ITO and promote the formation of molecular heterojunctions. We found that pyridinium squarate zwitterions display excellent selectivity for binding to ITO over gold surfaces, with contact resistivity comparable to that of carboxylic acids. These single-molecule experiments are complemented by surface chemical characterization with X-ray photoelectron spectroscopy, quartz crystal microbalance, contact angle determination, and nanolithography using an atomic force miscroscope. Finally, we report the first density-functional theory calculations involving ITO electrodes to model charge transport through ITO-molecule-gold heterojunctions.

Switching Quantum Interference in Phenoxyquinone Single Molecule Junction with Light.

Quantum interference (QI) can lead to large variations in single molecule conductance. However, controlling QI using external stimuli is challenging. The molecular structure of phenoxyquinone can be tuned reversibly using light stimulus. In this paper, we show that this can be utilized to control QI in phenoxyquinone derivatives. Our calculations indicate that, as a result of such variation in molecular structure of phenoxyquinone, a crossover from destructive to constructive QI is induced. This leads to a significant variation in the single molecule conductance by a couple of orders of magnitude. This control of QI using light is a new paradigm in photosensitive single molecule switches and opens new avenues for future QI-based photoswitches.

Anti-resonance features of destructive quantum interference in single-molecule thiophene junctions achieved by electrochemical gating.

Controlling the electrical conductance and in particular the occurrence of quantum interference in single-molecule junctions through gating effects has potential for the realization of high-performance functional molecular devices. In this work we used an electrochemically gated, mechanically controllable break junction technique to tune the electronic behaviour of thiophene-based molecular junctions that show destructive quantum interference features. By varying the voltage applied to the electrochemical gate at room temperature, we reached a conductance minimum that provides direct evidence of charge transport controlled by an anti-resonance arising from destructive quantum interference. Our molecular system enables conductance tuning close to two orders of magnitude within the non-faradaic potential region, which is significantly higher than that achieved with molecules not showing destructive quantum interference. Our experimental results, interpreted using quantum transport theory, demonstrate that electrochemical gating is a promising strategy for obtaining improved in situ control over the electrical performance of interference-based molecular devices.