Biopolymers-Based Macrogels with Applications in the Food Industry: Capsules with Berry Juice for Functional Food Products.

The present study focused on the development of gel-based capsules from sodium alginate and the fresh juice from different berries: chokeberry, sea buckthorn, and blueberry. Obtained through the extrusion method, the macrocapsules were added into yogurt, a well-known and consumed dairy product. In order to establish the changes that can occur for the food product, the samples were tested over 7 and 15 days of storage in refrigeration conditions. According to the results, the antioxidant activity increased during storage and gels can represent a good option for bioactive substances' encapsulation. Sensorial analysis performed indicated that consumers are open to consuming yogurt berry capsules and, according to the results observed in the scientific literature, they no longer rejected the product due to the bitterness and sourness of sea buckthorn or aronia. Sea buckthorn capsules were brighter (L*) than chokeberry and blueberry capsules due to carotene content and dark colors. Minimal diameter variations and small standard deviations (SD = 0.25/0.33) suggest that extrusion methods and the Caviar box are good for gel capsule development. Yogurt luminosity varied with capsules; control had the highest, followed by sea buckthorn yogurt. Samples with chokeberry and blueberry (dark) capsules had lower luminosity. Over 8 and 15 days, luminosity slightly decreased, while a* and b* (hue and saturation) increased. Post-storage, the sample with chokeberry capsules showed a light purple color, indicating color transfer from capsules, with increased antioxidant activity. Differences between the samples and control were less pronounced in the sample with sea buckthorn capsules. Values for color differences between yogurt samples during the storage period revealed the most significant difference during the first storage period (day 1-8), with blueberries showing the lowest difference, indicating the stability of the blueberry capsules' wall during storage.

Spent Grain: A Functional Ingredient for Food Applications.

Spent grain is the solid fraction remaining after wort removal. It is nutritionally rich, composed of fibers-mainly hemicellulose, cellulose, and lignin-proteins, lipids, vitamins, and minerals, and must be managed properly. Spent grain is a by-product with high moisture, high protein and high fiber content and is susceptible to microbial contamination; thus, a suitable, cost-effective, and environmentally friendly valorization method of processing it is required. This by-product is used as a raw material in the production of many other food products-bakery products, pasta, cookies, muffins, wafers, snacks, yogurt or plant-based yogurt alternatives, Frankfurter sausages or fruit beverages-due to its nutritional values. The circular economy is built on waste reduction and the reuse of by-products, which find opportunities in the regeneration and recycling of waste materials and energy that become inputs in other processes and food products. Waste disposal in the food industry has become a major issue in recent years when attempting to maintain hygiene standards and avoid soil, air and water contamination. Fortifying food products with spent grain follows the precepts of the circular bio-economy and industrial symbiosis of strengthening sustainable development. The purpose of this review is to update information on the addition of spent grain to various foods and the influence of spent grain on these foods.

The Effect of Dry Hopping Efficiency on ß-Myrcene Dissolution into Beer.

The production of heavily hopped beers, such as Indian Pale Ale (IPA) styles, has been gaining momentum in recent years in the Central European markets. To this end, the dry hopping process is becoming increasingly popular, mostly in microbreweries, but also with larger manufacturers. In our research, we investigated the dissolution rate of the main volatile component of hops, ß-myrcene with a modified dry hopping method. Following the primary fermentation, we applied the dry hopping process, where the weighed hops were chopped and blended into a container with 0.5 L of beer and later added to the young beer. During the dry hopping process, we determined various important parameters of the beer, and we repeated the same measurements for the bottled beer. In the first 96 h of the dry hopping process, we monitored the concentration of ß-myrcene so that we managed to determine the dissolution rate constant (k = 0.1946 h-1). The ß-myrcene concentration stabilizes after 44 h in the fermenter. At the same time, measurements were conducted for bitterness, pH, CO2 and alcohol content, extract and density during the process. Our experiment demonstrates that a new method of dry hopping provides a much higher concentration of ß-myrcene (215 µg/L) than other methods indicated in former studies in the field. A health and safety assessment of ß-myrcene was also made and we determined what the safe amount of ß-myrcene ingested with IPA beer is. Our modified process was successful, we were able to determine the dissolution rate of ß-myrcene, and the recommended daily intake of IPA beer with particular reference to ß-myrcene.

Buckwheat and Amaranth as Raw Materials for Brewing, a Review.

Globally, beer is considered the most-consumed low-alcohol beverage, it ranks third, after water and tea, in the top sales of these drinks. New types of beer are the result of the influence of several factors, including innovations in science and technology, changing requirements for food consumption of the population, competition between producers, promotion of food for health, flavor, and quality, the limited nature of traditional food resource raw materials, and the interest of producers in reducing production costs. Manufacturers are looking for new solutions for obtaining products that meet the requirements of consumers, authentic products of superior quality, with distinctive taste and aroma. This review proposes the use of two pseudocereals as raw materials in the manufacture of beer: buckwheat and amaranth, focusing on the characteristics that recommend them in this regard. Due to their functional and nutraceutical properties, these pseudocereals can improve the quality of beer-a finished product. Additionally, all types of beer obtained from these pseudocereals are recommended for diets with particular nutritional requirements, especially gluten-free diets. Researchers and producers will continue to improve and optimize the sensory and technological properties of the new types of beer obtained from these pseudocereals.

Spent Grain from Malt Whisky: Assessment of the Phenolic Compounds.

In order to extract antioxidant phenolic compounds from spent grain (SG) two extraction methods were studied: the ultrasound-assisted method (US) and the Ultra-Turrax method (high stirring rate) (UT). Liquid to solid ratios, solvent concentration, time, and temperature/stirring rate were optimized. Spent grain extracts were analyzed for their total phenol content (TPC) (0.62 to 1.76 mg GAE/g SG DW for Ultra-Turrax pretreatment, and 0.57 to 2.11 mg GAE/g SG DW for ultrasound-assisted pretreatment), total flavonoid content (TFC) (0.6 to 1.67 mg QE/g SG DW for UT, and 0.5 to 1.63 mg QE/g SG DW for US), and antioxidant activity was measured using 2,2-diphenyl-2-picrylhydrazyl (DPPH) free radical (25.88% to 79.58% for UT, and 27.49% to 78.30% for UT). TPC was greater at a high stirring rate and high exposure time up to a certain extent for the Ultra-Turrax method, and at a high temperature for the ultrasound-assisted method. P-coumaric acid (20.4 ± 1.72 mg/100 SG DW for UT, and 14.0 ± 1.14 mg/100 SG DW for US) accounted for the majority of the phenolic found compounds, followed by rosmarinic (6.5 ± 0.96 mg/100 SG DW for UT, and 4.0 ± 0.76 mg/100 SG DW for US), chlorogenic (5.4 ± 1.1 mg/100 SG DW for UT, and non-detectable for US), and vanillic acids (3.1 ± 0.8 mg/100 SG DW for UT, and 10.0 ± 1.03 mg/100 SG DW for US) were found in lower quantities. Protocatechuic (0.7 ± 0.05 mg/100 SG DW for UT, and non-detectable for US), 4-hydroxy benzoic (1.1 ± 0.06 mg/100 SG DW for UT, and non-detectable for US), and caffeic acids (0.7 ± 0.03 mg/100 SG DW for UT, and non-detectable for US) were present in very small amounts. Ultrasound-assisted and Ultra-Turrax pretreatments were demonstrated to be efficient methods to recover these value-added compounds.

Acrylamide in Bakery Products: A Review on Health Risks, Legal Regulations and Strategies to Reduce Its Formation.

Acrylamide is a contaminant as defined in Council Regulation (EEC) No 315/93 and as such, it is considered a chemical hazard in the food chain. The toxicity of acrylamide has been acknowledged since 2002, among its toxicological effects on humans being neurotoxicity, genotoxicity, carcinogenicity, and reproductive toxicity. Acrylamide has been classified as carcinogenic in the 2A group, with human exposure leading to progressive degeneration of the peripheral and central nervous systems characterized by cognitive and motor abnormalities. Bakery products (bread, crispbread, cakes, batter, breakfast cereals, biscuits, pies, etc.) are some of the major sources of dietary acrylamide. The review focuses on the levels of acrylamide in foods products, in particular bakery ones, and the risk that resulting dietary intake of acrylamide has on human health. The evolving legislative situation regarding the acrylamide content from foodstuffs, especially bakery ones, in the European Union is discussed underlining different measures that food producers must take in order to comply with the current regulations regarding the acrylamide levels in their products. Different approaches to reduce the acrylamide level in bakery products such as the use of asparginase, calcium salts, antioxidants, acids and their salts, etc., are described in detail.

Prediction of Pasting Properties of Dough from Mixolab Measurements Using Artificial Neuronal Networks.

An artificial neuronal network (ANN) system was conducted to predict the Mixolab parameters which described the wheat flour starch-amylase part (torques C3, C4, C5, and the difference between C3-C4and C5-C4, respectively) from physicochemical properties (wet gluten, gluten deformation index, Falling number, moisture content, water absorption) of 10 different refined wheat flourssupplemented bydifferent levels of fungal α-amylase addition. All Mixolab parameters analyzed and the Falling number values were reduced with the increased level of α-amylase addition. The ANN results accurately predicted the Mixolab parameters based on wheat flours physicochemical properties and α-amylase addition. ANN analyses showed that moisture content was the most sensitive parameter in influencing Mixolab maximum torque C3 and the difference between torques C3 and C4, while wet gluten was the most sensitive parameter in influencing minimum torque C4 and the difference between torques C5 and C4, and α-amylase level was the most sensitive parameter in predicting maximum torque C5. It is obvious that the Falling number of all the Mixolab characteristics best predicted the difference between torques C3 and C4.