Single-cell analysis reveals a unique microenvironment in peri-implantitis.

AIM: This study aimed to reveal the unique microenvironment of peri-implantitis through single-cell analysis. MATERIALS AND METHODS: Herein, we performed single-cell RNA sequencing (scRNA-seq) of biopsies from patients with peri-implantitis (PI) and compared the results with healthy individuals (H) and patients with periodontitis (PD). RESULTS: Decreased numbers of stromal cells and increased immune cells were found in the PI group, which implies a severe inflammatory infiltration. The fibroblasts were found to be heterogeneous and the specific pro-inflammatory CXCL13+ sub-cluster was more represented in the PI group, in contrast to the PD and H groups. Furthermore, more neutrophil infiltration was detected in the PI group than in the PD group, and cell-cell communication and ligand-receptor pairs revealed most neutrophils were recruited by CXCL13+ fibroblasts through CXCL8/CXCL6-CXCR2/CXCR1. Notably, our study demonstrated that the unique microenvironment of the PI group promoted the differentiation of monocyte/macrophage lineage cells into osteoclasts, which might explain the faster and more severe bone resorption in the progression of PI than PD. CONCLUSIONS: Collectively, this study suggests a unique immune microenvironment of PI, which may explain the differences between PI and PD in the clinic. These outcomes will aid in finding new specific and effective treatments for PI.

[Analysis on the secondary attack rates of SARS-CoV-2 Omicron variant and the associated factors].

Objective: To evaluate the secondary attack rates of the SARS-CoV-2 Omicron variant and the associated factors. Methods: A total of 328 primary cases and 40 146 close contacts of the SARS-CoV-2 Omicron variant routinely detected in local areas of Jiangsu Province from February to April 2022 were selected in this study, and those with positive nucleic acid test results during 7 days of centralized isolation medical observation were defined as secondary cases. The demographic information and clinical characteristics were collected, and the secondary attack rate (SAR) and the associated factors were analyzed by using a multivariate logistic regression model. Results: A total of 1 285 secondary cases of close contacts were reported from 328 primary cases, with a SAR of 3.2% (95%CI: 3.0%-3.4%). Among the 328 primary cases, males accounted for 61.9% (203 cases), with the median age (Q1, Q3) of 38.5 (27, 51) years old. Among the 1 285 secondary cases, males accounted for 59.1% (759 cases), with the median age (Q1, Q3) of 34 (17, 52) years old. The multivariate logistic regression model showed that the higher SAR was observed in the primary male cases (OR=1.632, 95%CI: 1.418-1.877), younger than 20 years old (OR=1.766, 95%CI: 1.506-2.072),≥60 years old (OR=1.869, 95%CI: 1.476-2.365), infected with the BA.2 strain branch (OR=2.906, 95%CI: 2.388-3.537), the confirmed common cases (OR=2.572, 95%CI: 2.036-3.249), and confirmed mild cases (OR=1.717, 95%CI: 1.486-1.985). Meanwhile, the higher SAR was observed in the close contacts younger than 20 years old (OR=2.604, 95%CI: 2.250-3.015),≥60 years old (OR=1.287, 95%CI: 1.052-1.573) and exposure for co-residence (OR=27.854, 95%CI: 23.470-33.057). Conclusion: The sex and age of the primary case of the Omicron variant, the branch of the infected strain, case severity of the primary case, as well as the age and contact mode of close contacts are the associated factors of SAR.

[Epidemiological analysis of influenza during COVID-19 epidemic in Jiangsu Province from 2020 to 2022].

By analyzing the epidemic characteristics of influenza during the COVID-19 epidemic in Jiangsu Province from 2020 to 2022, it found that 90 721 influenza-like case samples were collected in Jiangsu Province from 2020 to 2022, of which 6 732 were nucleic acid-positive samples, with an average positive detection rate of 7.4% in three years. The annual positive detection rate presented a U-shaped distribution, with positive detection rates of 4.4%, 3.2% and 14.7%, respectively, with statistically significant differences (χ2=12 126.00, P<0.001). During the seasonal peak period of influenza from 2020 to 2022, there was a significant decrease in the intensity of the two influenza activity peaks that occurred before the virus became fully prevalent in the population. The first peak occurred from January to February 2020, and the positive detection rate of influenza nucleic acid decreased from 54.4% (317/583) in the third week to 2.1% (12/584) in the eighth week, with a statistically significant difference (χ2=394.49, P<0.001). The second occurred in December 2022, and the positive detection rate of influenza nucleic acid decreased from 14.9% (90/605) at the 49th week to 1.9% (11/572) at the 52nd week, with a statistically significant difference (χ2=62.88, P<0.001). The influenza epidemic in Jiangsu Province from 2020 to 2022 had obvious seasonal characteristics, and the distribution differences of influenza virus-positive cases in each month were statistically significant (χ2=858.00, P<0.001), with two epidemic peaks each year: winter, spring (December to March of the following year), and summer, and autumn (July to November). The epidemic strains were the B-V strain and seasonal H3 strain, respectively. There was a statistically significant difference in the positive detection rate of influenza cases detected in different age groups (χ2=60.00, P<0.001). The age group between 5 and 14 years old had the highest influenza-positive detection rate (10.4%), while the age group≥60 years old had a relatively low influenza-positive detection rate (5.1%). The positive detection rate decreased with the increase in the age group (Ztrend=12.82, P<0.001).

[Present situation and analysis of murine allergic rhinitis model].

There have been 20 years of history in the study of allergic rhinitis(AR) using a mice model. At present, the AR mice model still exists some problems in the selection of mice strains, allergens and adjuvant types, molding cycle, allergen dose, model judgment, and so on, which affects the authenticity and comparability of the research results. By gradually solving the problems existing in the mice AR model, it is of great significance to realize the standardization of AR model, and the depth of the AR research.

Ovariectomy induces osteoporosis in the maxillary alveolar bone: an in vivo micro-CT and histomorphometric analysis in rats.

OBJECTIVE: To investigate whether porotic changes occur in maxillary alveolar bone in ovariectomized rats. METHODS: Thirty-two 6-week-old female Sprague-Dawley rats were divided into an ovariectomy group (OVX) and a sham-ovariectomy group (sham). Twelve weeks after surgery, maxillae of 16 rats (eight OVX and eight sham) were analyzed by micro-CT. Inter-radicular alveolar bone of the maxillary first molar was reconstructed and analyzed. The remaining 16 maxillae were used for histochemistry, including hematoxylin-eosin staining and tartrate-resistant acid phosphatase enzyme staining. RESULTS: Three-dimensional reconstructed images of the irregular alveolar bone showed an intuitive view of porotic changes in the OVX group. The alveolar bone in OVX rats had a porous microarchitecture including lower bone mass and a looser structure of more widely separated trabeculae. Bone mineral density (BMD), bone volume fraction (BV/TV), and trabecular thickness (Tb.Th.) were significantly lower in the OVX group than those in the sham group (P < 0.05). Trabecular separation (Tb.Sp.) increased significantly in the OVX rats compared to the sham rats (P < 0.05). Histomorphometric analysis of alveolar bone also revealed porotic changes in the OVX rats. Bone area ratio significantly decreased in the OVX group compared with the sham group (P < 0.01). There were also more osteoclasts present in the alveolar bone of OVX rats compared to sham rats (P < 0.05). CONCLUSION: Ovariectomy induces osteoporosis in maxillary alveolar bone in rats, which may be related to the increased number of osteoclasts.

Damage to cobalt-chromium surfaces during arthroscopy of total knee replacements.

BACKGROUND: It has been stated that care must be taken not to scratch the metal components during total knee arthroscopy; however, this concern has not been studied. Clinical observation during arthroscopy of total knee replacements suggested the possibility of damage to the femoral component by the arthroscopic cannula; therefore, a bench test was performed to study this potential risk. METHODS: Cobalt-chromium femoral components were tested to determine the surface damage that resulted from moving a stainless-steel arthroscopic cannula and a plastic arthroscopic cannula across the components under a variety of applied loads. Scanning electron microscopy and surface-roughness measurements of the prosthetic surface were used to evaluate the damage. RESULTS: The stainless-steel cannula produced observable alterations to the surface of the femoral component at loads as small as 8 N. The majority of these alterations were deposits of stainless steel from the cannula onto the component. The plastic cannula did not appear to produce alterations on the component surface. Surface roughness increased with increasing loading of the stainless-steel cannula, but there was no noticeable change with increasing loading of the plastic cannula. These forces did, however, severely damage some parts of the plastic cannula. CONCLUSIONS: Alterations to the surface of cobalt-chromium femoral components can occur during arthroscopy with stainless-steel cannulae but not with plastic cannulae. The results of this study support a recommendation to use plastic cannulae during arthroscopy of total knee replacements. CLINICAL RELEVANCE: Arthroscopy of total knee replacements is increasing in the clinical setting, and damage to the prosthesis should be avoided whenever possible. This study provides evidence that damage to the femoral component is possible with a stainless-steel cannula and that use of a plastic cannula may reduce this risk.

Fixation of proximal humeral prostheses and rotational micromotion.

Twenty pairs of cadaveric humeri were used to compare the rotational stability of proximal humeral prostheses fixed by proximal cementation with the stability offered by press fit or full cementation. For each proximally cemented specimen, only the upper portion of the prosthesis was coated with cement. For the fully cemented specimens, a cement restrictor was used just distal to the prosthesis, and a finger-packing technique was used to fill the proximal humeral medullary canal. Torque was applied to the Morse taper of the prostheses, and rotational micromotion was measured at the level of the osteotomy. In each of 11 pairs of cadaveric humeri, one side was press fit and the contralateral side was proximally cemented; in each of 9 pairs, proximal cementation was compared with full cementation. Proximally cemented prostheses' micromotion was significantly less than that of press-fit prostheses (P = .0016). There was no difference in micromotion between proximal cementation and full cementation (P = .82). Proximal cementation increased initial fixation over press fit. Full cementation did not increase rotational stability.

Femoral neck fracture fixation: a biomechanical study of two cannulated screw placement techniques.

This biomechanical study evaluated two different methods of femoral neck fracture fixation. Ten pairs of embalmed femora were used. A standardized midcervical osteotomy was performed. One side from each pair was fixed with either conventional (central) or calcar (cortical adjacent) screw placement. The femora pairs then were subjected to cyclic and load to failure biomechanical testing. The results demonstrated significant improved stability, load, stiffness, and displacement in all tested parameters for the group with calcar screw fixation. Grossly, the conventional fixation group tended to fail in an excessively varus position, while the calcar fixation group failed with impaction of the head on the calcar, a potentially stable position.

Fixation of humeral prostheses and axial micromotion.

Surgeons often avoid cementing a proximal humeral prosthesis. Occasionally bony augmentation is needed. This study was undertaken to compare proximal cementation in combination with distal press with total cementation or press fit alone. In phase 1 axial micromotion with axial loading was measured in 15 pairs of humeri: 5 fully cemented versus proximally cemented, 5 fully cemented versus press fit, and 5 proximally cemented versus press fit. X-ray films of the specimens were obtained to assess canal fill. In phase 2 axial micromotion was measured in 5 pairs of high mineral density and 5 pairs of low mineral density to compare proximal cementation with press fit. The 3 M modular prosthesis was used in both phases. No difference was found in phase 1 among the 3 fixation techniques. A strong reverse statistical correlation (P = .007) (r = .55) was seen between axial micromotion and fill of the canal with the prosthesis. In the second phase no statistically significant difference was found between the techniques of fixation or between the 2 bone densities. Fill of the canal at the distal end of the prosthesis was the only variable found that affected axial micromotion, but it accounted for only approximately 30% of the variance. Bone quality and augmentation of the proximal bone with cement did not affect axial micromotion in this experiment but warrant further study.

Failure analysis of a beam-column under oblique-eccentric loading: potential failure surfaces for cervical spine trauma.

For a cantilever beam-column with one end built-in and the free end subjected to an oblique-eccentric arbitrary concentrated force, general formulas to produce failure were derived. The original generalized uniform solution to the oblique-eccentric buckling problem was obtained. The Secant formula and Euler's formula were proved to be specific cases in this general solution. The load ratio, F/aE, was derived as functions of the force acting direction, alpha, the slenderness ratio, L/r, as well as the eccentricity ratio, ec/r2. Material and buckling failures aspects were combined in a uniform structural failure analysis. Safe regions for the load ratio, F/aE, were visualized in the three-dimensional (F/aE)-alpha-(L/r) space with the eccentricity ratios, ec/r2, as a parameter. The column failure factor, kL, was shown to be a key index controlling both aspects of failure as well as the orientation of the second stiffest region. The angle alpha E = tan-1 (2L/pi e) for kL = pi/2 is the singular point for both strength and buckling failure, and alpha II = tan-1 (2L/3e) for KL = 0 is the upper bound of the second stiffest region. The feasible domain of the second stiffest region is bounded by alpha E and alpha II both of which are only functions of geometrical properties. The implications of these analyses for the experimental validation of cervical spine trauma are discussed.

The second stiffest axis of a beam-column: implications for cervical spine trauma.

Based on an idealized model of a homogeneous, isotropic beam-column, the second stiffest axis under static loading was derived. The maximum allowable force for the second stiffest axis was then examined. The ratio of the maximum allowable forces of the second stiffest axis to the stiffest axis was established. The stiffness ratio of the second stiffest axis to the stiffest axis was also found. Taking buckling into consideration, the safe load region for all possible acting directions was derived. The implications of the idealized model for cervical spine trauma are discussed.