An integrated approach using high time-resolved tools to study the origin of aerosols.

Long-range transport of natural and/or anthropogenic particles can contribute significantly to PM10 and PM2.5 concentrations and some European cities often fail to comply with PM daily limit values due to the additional impact of particles from remote sources. For this reason, reliable methodologies to identify long-range transport (LRT) events would be useful to better understand air pollution phenomena and support proper decision-making. This study explores the potential of an integrated and high time-resolved monitoring approach for the identification and characterization of local, regional and long-range transport events of high PM. In particular, the goal of this work was also the identification of time-limited event. For this purpose, a high time-resolved monitoring campaign was carried out at an urban background site in Bari (southern Italy) for about 20 days (1st-20th October 2011). The integration of collected data as the hourly measurements of inorganic ions in PM2.5 and their gas precursors and of the natural radioactivity, in addition to the analyses of aerosol maps and hourly back trajectories (BT), provided useful information for the identification and chemical characterization of local sources and trans-boundary intrusions. Non-sea salt (nss) sulfate levels were found to increase when air masses came from northeastern Europe and higher dispersive conditions of the atmosphere were detected. Instead, higher nitrate and lower nss-sulfate concentrations were registered in correspondence with air mass stagnation and attributed to local traffic source. In some cases, combinations of local and trans-boundary sources were observed. Finally, statistical investigations such as the principal component analysis (PCA) applied on hourly ion concentrations and the cluster analyses, the Potential Source Contribution Function (PSCF) and the Concentration Weighted Trajectory (CWT) models computed on hourly back-trajectories enabled to complete a cognitive framework and confirm the influence of aerosol transported from heavily polluted areas on the receptor site.

Thiophene-based compounds as fluorescent tags to study mesenchymal stem cell uptake and release of taxanes.

Human mesenchymal stem cells (hMSC) are multipotent cells that display the unique ability to home and engraft in tumor stroma. This remarkable tumor tropic property has generated a great deal of interest in many clinical settings. Recently, we showed that hMSC represent an excellent base for cell-mediated anticancer therapy since they are able to internalize paclitaxel (PTX) and to release it in an amount sufficient to inhibit tumor cell proliferation. In order to shed light on the dynamics of drug uptake and release, in the present paper we describe the synthesis of two novel thiophene-based fluorophore-paclitaxel conjugates, namely PTX-F32 and PTX-F35, as tools for in vitro drug tracking. We aimed to study the ability of these novel derivatives to be efficiently internalized by hMSC and, in a properly engineered coculture assay, to be released in the medium and taken up by tumor cells. In order to ensure better stability of the conjugates toward enzymatic hydrolysis, the selected oligothiophenes were connected to the taxol core at the C7 position through a carbamate linkage between PTX and the diamino linker. Antiproliferative experiments on both tumor cells and stromal cells clearly indicate that, in good correlation with the parent compound, cells are sensitive to nanomolar concentrations of the fluorescent conjugates. Moreover, in the coculture assay we were able to monitor, by fluorescence microscopy, PTX-F32 trafficking from hMSC toward glioblastoma U87 tumor cells. Our work paves the way for novel possibilities to perform extensive and high quality fluorescence-based analysis in order to better understand the cellular mechanisms involved in drug trafficking, such as microvescicle/exosome mediated release, in hMSC vehicle cells.

Indoor air quality (IAQ) assessment in a multistorey shopping mall by high-spatial-resolution monitoring of volatile organic compounds (VOC).

In order to assess indoor air quality (IAQ), two 1-week monitoring campaigns of volatile organic compounds (VOC) were performed in different areas of a multistorey shopping mall. High-spatial-resolution monitoring was conducted at 32 indoor sites located in two storehouses and in different departments of a supermarket. At the same time, VOC concentrations were monitored in the mall and parking lot area as well as outdoors. VOC were sampled at 48-h periods using diffusive samplers suitable for thermal desorption. The samples were then analyzed with gas chromatography-mass spectrometry (GC-MS). The data analysis and chromatic maps indicated that the two storehouses had the highest VOC concentrations consisting principally of terpenes. These higher TVOC concentrations could be a result of the low efficiency of the air exchange and intake systems, as well as the large quantity of articles stored in these small spaces. Instead, inside the supermarket, the food department was the most critical area for VOC concentrations. To identify potential emission sources in this department, a continuous VOC analyzer was used. The findings indicated that the highest total VOC concentrations were present during cleaning activities and that these activities were carried out frequently in the food department. The study highlights the importance of conducting both high-spatial-resolution monitoring and high-temporal-resolution monitoring. The former was able to identify critical issues in environments with a complex emission scenario while the latter was useful in interpreting the dynamics of each emission source.

The impact of infield biomass burning on PM levels and its chemical composition.

In the South of Italy, it is common for farmers to burn pruning waste from olive trees in spring. In order to evaluate the impact of the biomass burning source on the physical and chemical characteristics of the particulate matter (PM) emitted by these fires, a PM monitoring campaign was carried out in an olive grove. Daily PM10 samples were collected for 1 week, when there were no open fires, and when biomass was being burned, and at two different distances from the fires. Moreover, an optical particle counter and a polycyclic aromatic hydrocarbon (PAH) analyzer were used to measure the high time-resolved dimensional distribution of particles emitted and total PAHs concentrations, respectively. Chemical analysis of PM10 samples identified organic and inorganic components such as PAHs, ions, elements, and carbonaceous fractions (OC, EC). Analysis of the collected data showed the usefulness of organic and inorganic tracer species and of PAH diagnostic ratios for interpreting the impact of biomass fires on PM levels and on its chemical composition. Finally, high time-resolved monitoring of particle numbers and PAH concentrations was performed before, during, and after biomass burning, and these concentrations were seen to be very dependent on factors such as weather conditions, combustion efficiency, and temperature (smoldering versus flaming conditions), and moisture content of the wood burned.

Mesenchymal stem cells as delivery vehicle of porphyrin loaded nanoparticles: effective photoinduced in vitro killing of osteosarcoma.

Mesenchymal stem cells (MSC) have the unique ability to home and engraft in tumor stroma. These features render them potentially a very useful tool as targeted delivery vehicles which can deliver therapeutic drugs to the tumor stroma. In the present study, we investigate whether fluorescent core-shell PMMA nanoparticles (FNPs) post-loaded with a photosensitizer, namely meso-tetrakis (4-sulfonatophenyl) porphyrin (TPPS) and uploaded by MSC could trigger osteosarcoma (OS) cell death in vitro upon specific photoactivation. In co-culture studies we demonstrate using laser confocal microscopy and time lapse imaging, that only after laser irradiation MSC loaded with photosensitizer-coated fluorescent NPs (TPPS@FNPs) undergo cell death and release reactive oxygen species (ROS) which are sufficient to trigger cell death of all OS cells in the culture. These results encourage further studies aimed at proving the efficacy of this novel tri-component system for PDT applications.