A needle probe to detect surface enhanced Raman scattering (SERS) within solid specimen.

A needle probe has been developed to obtain surface enhanced Raman scattering data from within a solid specimen located remotely from the spectrometer. It produces the high signal strength of a single mode optical fiber but with a negligible fiber induced background. The observed Raman signal strength is comparable to that obtained with a microscope objective of the same numerical aperture in a conventional spectrometer arrangement and many times larger than that of probes using two fibers.

Clinical probe utilizing surface enhanced Raman scattering.

Conventional Raman scattering is a well-known technique for detecting and identifying complex molecular samples. In surface enhanced Raman scattering, a nanorough metallic surface close to the sample enormously enhances the Raman signal. In previous work, the metallic surface was a thin layer of gold deposited on a rough transparent epoxy substrate. The advantage of the clear substrate was that the Raman signal could be obtained by passing light through the substrate, on to opaque samples simply placed against its surface. In this work, a commercially available Raman spectrometer was coupled to a distant probe. Raman signals were obtained from the surface, and from the interior, of a solid specimen located more than 1 m away from the spectrometer. The practical advantage of this arrangement is that it opens up surface enhanced Raman spectrometry to a clinical environment, with a patient simply sitting or lying near the spectrometer.

Nanorough gold for enhanced Raman scattering.

Conventional Raman scattering is a workhorse technique for detecting and identifying complex molecular samples. In surface enhanced Raman scattering, a nanorough metallic surface close to the sample enhances the Raman signal enormously. In this work, the surface is on a clear epoxy substrate. The epoxy is cast on a silicon wafer, using 20 nm of gold as a mold release. This single step process already produces useful enhanced Raman signals. However, the Raman signal is further enhanced by (1) depositing additional gold on the epoxy substrate and (2) by using a combination of wet and dry etches to roughen the silicon substrate before casting the epoxy. The advantage of a clear substrate is that the Raman signal may be obtained by passing light through the substrate, with opaque samples simply placed against the surface. Results were obtained with solutions of Rhodamine 6G in deionized water over a range of concentrations from 1 nM to 1 mM. In all cases, the signal to noise ratio was greater than 10:1.

Electrophoretic Deposition of Carbon Nanotubes on 3-Amino-Propyl-Triethoxysilane (APTES) Surface Functionalized Silicon Substrates.

Fabrication of uniform thin coatings of multi-walled carbon nanotubes (MWCNTs) by electrophoretic deposition (EPD) on semiconductor (silicon) substrates with 3-aminopropyl-triethoxysilane (APTES) surface functionalization has been studied extensively in this report. The gradual deposition and eventual film formation of the carbon nanotubes (CNTs) is greatly assisted by the Coulombic force of attraction existing between the positively charged -NH2 surface groups of APTES and the acid treated, negatively charged nanotubes migrating towards the deposition surfaces. The remarkable deposition characteristics of the CNT coatings by EPD in comparison to the dip coating method and the influence of isopropyl (IPA)-based CNT suspension in the fabricated film quality has also been revealed in this study. The effect of varying APTES concentration (5%-100%) on the Raman spectroscopy and thickness of the deposited CNT film has been discussed in details, as well. The deposition approach has eliminated the need of metal deposition in the electrophoretic deposition approach and, therefore, establishes a cost-effective, fast and entirely room temperature-based fabrication strategy of CNT thin films for a wide range of next generation electronic applications.