Controllability of brushite structural parameters using an applied magnetic field.

The paper studies the influence of low intensity static magnetic field on brushite structural and microstructural parameters using the X-ray diffraction and the transmission electron microscopy. This effect was shown to have various influences on DCPD (Dicalcium Phosphate Dihydrate) structure depending on a magnetic field configuration or time of synthesis, which allows achieving controllability of the main properties of an obtained material. The influence of the magnetic field leads mostly to the decrease of crystallite sizes with no impact on the crystal lattice parameters. In (0 2 0) and (1 5 0) planes the growth of crystallite sizes is observed after 2 and 3 days of crystallization, respectively. The analysis of different contributions to peak broadening in [0 b 0] direction showed a similar trend for the crystallite sizes with the lower lattice microstrains after 2 days of synthesis. The effect similar to the preferred orientation was observed and classified with the Harris method.

Rare case of pathological biomineralization of eye tissue.

The authors have described the case of pathological biomineralization of ocular posterior chamber. Histological examination of affected eye shells revealed inflammation, oedema, dyscirculatory violations, and signs of dystrophic calcification. Structural-phase and chemical analyses of calcification have revealed that the biomineral consists of hydroxyapatite with relatively small crystallite size and defective crystal lattice. In the described case the formation of pathological biomineral in the vision organ was initiated by penetrating wound. Eye injury might have caused a hemophthalmus and chronic inflammatory reaction in the shells, these processes eventually led to the organ subatrophy and to the development of dystrophic and necrobiotic changes in the tissues. Pathological biomineralization in the affected organ developed as a type of dystrophic calcification.Key words: eye, pathological biomineralization, hydroxyapatite.

Silver-doped hydroxyapatite coatings formed on Ti-6Al-4V substrates and their characterization.

Coatings with antibacterial components for medical implants are recommended to reduce the risk of bacterial infections. Therefore hydroxyapatite (HA) coatings with addition of chitosan (CS) and silver (Ag) are proposed in this work in an attempt to resolve this problem. Ti-6Al-4V substrates were modified by a chitosan film to study the influence of surface modification on the formation of the HA-Ag and HA-CS-Ag coatings. Using a thermal substrate method, HA and HA-CS coatings doped with Ag(+) were prepared at low substrate temperatures (90°C). Coated surfaces were examined using X-ray diffraction and scanning electron microscopy. The amount of silver in the deposited coatings was analyzed by atomic absorption spectroscopy. From this study it is concluded that the substrate surface modified by a chitosan film promotes the coating formation and increases the antibacterial activity of produced coatings against a strain of Escherichia coli. The adhesion of E. coli (ATCC 25922) to sheep erythrocytes was decreased by 14% as compared with the reference samples without Ag. It could be explained by the inhibition of bacterial adhesins by Ag(+) ions released. The combined action of silver ions and chitosan resulted in a 21% decrease in adhesive index.