Wine Reduction Potentials: Are These Measured Values Really Reduction Potentials?

During its production wine can react with substantial amounts of aerial oxygen. Some oxidation can be beneficial, especially in red wine, but if allowed to occur in excess it is highly detrimental, making oxygen management an important aspect of wine making. The use of reduction potentials at platinum electrodes to measure the redox state of wines extends back over 80 years. The premise is that reductants in wine produce oxidized derivatives and the balance between the two determines the reduction potential, as in classical electrochemistry. As the detailed mechanism of wine oxidation becomes better understood, it is apparent that redox couples in wine do not function in this way. It is proposed that the observed potentials are mixed potentials largely due to ethanol oxidation coupled with oxygen reduction. Under low oxygen conditions, further redox couples can contribute to the mixed potential, both directly and via adsorption effects at the platinum electrode.

Liberation of Hydrogen Sulfide from Dicysteinyl Polysulfanes in Model Wine.

Diorganopolysulfanes can be generated when hydrogen sulfide (H2S) and thiols are oxidized in the presence of Cu(II) under conditions usually aimed at removing H2S from wine. This work sought to understand if polysulfanes could act as latent sources of H2S during postbottling storage. The stability of the polysulfanes formed in situ in model wine containing cysteine, H2S, and transition metals was dependent both on the number of sulfur linking atoms (Sn) and on the presence of a reducing agent, such as sulfur dioxide or ascorbic acid. A polysulfane containing three linking sulfur atoms was the most stable, with 84% of the relative initial amount remaining in solution after six months, compared to polysulfanes containing four or more linking sulfur atoms that decomposed rapidly, with 26% remaining after six months. Importantly, sulfur dioxide was associated with the rapid degradation of polysulfanes and subsequent liberation of H2S. Three cysteine- S-sulfonates were also tentatively identified, which gives insight into the possible release mechanisms involved with H2S reappearance.

Copper(II)-Mediated Hydrogen Sulfide and Thiol Oxidation to Disulfides and Organic Polysulfanes and Their Reductive Cleavage in Wine: Mechanistic Elucidation and Potential Applications.

Fermentation-derived volatile sulfur compounds (VSCs) are undesirable in wine and are often remediated in a process known as copper fining. In the present study, the addition of Cu(II) to model and real wine systems containing hydrogen sulfide (H2S) and thiols provided evidence for the generation of disulfides (disulfanes) and organic polysulfanes. Cu(II) fining of a white wine spiked with glutathione, H2S, and methanethiol (MeSH) resulted in the generation of MeSH-glutathione disulfide and trisulfane. In the present study, the mechanisms underlying the interaction of H2S and thiols with Cu(II) is discussed, and a prospective diagnostic test for releasing volatile sulfur compounds from their nonvolatile forms in wine is investigated. This test utilized a combination of reducing agents, metal chelators, and low-oxygen conditions to promote the release of H2S and MeSH, at levels above their reported sensory thresholds, from red and white wines that were otherwise free of sulfidic off-odors at the time of addition.

Reaction Mechanisms of Metals with Hydrogen Sulfide and Thiols in Model Wine. Part 1: Copper-Catalyzed Oxidation.

Sulfidic off-odors as a result of hydrogen sulfide (H2S) and low-molecular-weight thiols are commonly encountered in wine production. These odors are usually removed by the process of Cu(II) fining, a process that remains poorly understood. The present study aims to elucidate the underlying mechanisms by which Cu(II) interacts with H2S and thiol compounds (RSH) under wine-like conditions. Copper complex formation was monitored along with H2S, thiol, oxygen, and acetaldehyde concentrations after the addition of Cu(II) (50 or 100 µM) to air-saturated model wine solutions containing H2S, cysteine, 6-sulfanylhexan-1-ol, or 3-sulfanylhexan-1-ol (300 µM each). The presence of H2S and thiols in excess to Cu(II) led to the rapid formation of ∼1.4:1 H2S/Cu and ∼2:1 thiol/Cu complexes, resulting in the oxidation of H2S and thiols and reduction of Cu(II) to Cu(I), which reacted with oxygen. H2S was observed to initially oxidize rather than form insoluble copper sulfide. The proposed reaction mechanisms provide insight into the extent to which H2S can be selectively removed in the presence of thiols in wine.

Reaction Mechanisms of Metals with Hydrogen Sulfide and Thiols in Model Wine. Part 2: Iron- and Copper-Catalyzed Oxidation.

Sulfidic off-odors arising during wine production are frequently removed by Cu(II) fining. In part 1 of this study ( 10.1021/acs.jafc.6b00641 ), the reaction of H2S and thiols with Cu(II) was examined; however, the interaction of iron and copper is also known to play an important synergistic role in mediating non-enzymatic wine oxidation. The interaction of these two metals in the oxidation of H2S and thiols (cysteine, 3-sulfanylhexan-1-ol, and 6-sulfanylhexan-1-ol) was therefore examined under wine-like conditions. H2S and thiols (300 µM) were reacted with Fe(III) (100 or 200 µM) alone and in combination with Cu(II) (25 or 50 µM), and concentrations of H2S and thiols, oxygen, and acetaldehyde were monitored over time. H2S and thiols were shown to be slowly oxidized in the presence of Fe(III) alone and were not bound to Fe(III) under model wine conditions. However, Cu(II) added to model wine containing Fe(III) was quickly reduced by H2S and thiols to form Cu(I) complexes, which then rapidly reduced Fe(III) to Fe(II). Oxidation of Fe(II) in the presence of oxygen regenerated Fe(III) and completed the iron redox cycle. In addition, sulfur-derived oxidation products were observed, and the formation of organic polysulfanes was demonstrated.

Role of tartaric and malic acids in wine oxidation.

Tartaric acid determines the reduction potential of the Fe(III)/Fe(II) redox couple. Therefore, it is proposed that it determines the ability of Fe to catalyze wine oxidation. The importance of tartaric acid was demonstrated by comparing the aerial oxidation of 4-methylcatechol (4-MeC) in model wine made up with tartaric and acetic acids at pH 3.6. Acetic acid, as a weaker Fe(III) ligand, should raise the reduction potential of the Fe couple. 4-MeC was oxidized in both systems, but the mechanisms were found to differ. Fe(II) readily reduced oxygen in tartrate model wine, but Fe(III) alone failed to oxidize the catechol, requiring sulfite assistance. In acetate model wine the reverse was found to operate. These observations should have broad application to model systems designed to study the oxidative process in foods and other beverages. Consideration should be given to the reduction potential of metal couples by the inclusion of appropriate ligands.

Design of selective thrombin inhibitors based on the (R)-Phe-Pro-Arg sequence.

Potent and selective inhibitors of thrombin were sought based on the (R)-Phe-Pro-Arg sequence. The objective was to generate similar binding interactions to those achieved by potent competitive inhibitors of the argatroban type, so eliminating the need for covalent interaction with the catalytic serine function, as utilized by aldehyde and boronic acid type inhibitors. Improving the S(1) subsite interaction by substitution of arginine with a 4-alkoxybenzamidine residue provided potent lead 2 (K(i) = 0.37 nM). Though an amide bond, which H-bonds to the active site, is lost, modeling indicated that a new H-bond is generated between the alkoxy oxygen atom and the catalytic Ser-195 hydroxyl group. Substitution of the benzamidine system by 1-amidinopiperidine then gave compound 4, which provided a further gain in selectivity over trypsin. However, previous work had shown that these compounds were likely to be too lipophilic (Log D +0.4 and +0.2, respectively) and to suffer rapid hepatic extraction, presumably via biliary elimination. Accordingly, both proved short-acting when administered intravenously to rats and showed poor activity when given intraduodenally. The aim was then to reduce lipophilicity below a log D of -1.2, which in a previously reported series had been effective in preventing rapid clearance. It was anticipated that compounds of this type would rely on the cation selective paracellular route of absorption from the gastrointestinal tract. Potent polar analogues with selectivity >1000 over trypsin were obtained. The best in vivo activity was shown by compound 12. However, in the final analysis, its oral bioavilability proved poor, relative to analogues with similar physicochemical properties derived from argatroban, consistent with the hypothesis that molecular shape is an additional important determinant of paracellular absorption.