Crystal structure of a trigonal polymorph of aqua-dioxidobis(pentane-2,4-dionato-κ2 O,O')uranium(VI).

The title compound, [UO2(acac)2(H2O)] consists of a uran-yl(VI) unit ([O=U=O]2+) coordinated to two monoanionic acetyl-acetonate (acac, C5H7O2) ligands and one water mol-ecule. The asymmetric unit includes a one-half of a uranium atom, one oxido ion, one-half of a water mol-ecule and one acac ligand. The coordination about the uranium atom is distorted penta-gonal-bipyramidal. The acac ligands and Ow atom comprise the equatorial plane, while the uranyl O atoms occupy the axial positions. Inter-molecular hydrogen bonding between complexes results in the formation of two-dimensional hexa-gonal void channels along the c-axis direction with a diameter of 6.7 Å. The monoclinic (P21/c space group) polymorph was reported by Alcock & Flanders [(1987). Acta Cryst. C43, 1480-1483].

Electrochemical behaviour of uranium at a tripolyphosphate modified ITO electrode.

UO22+ binds to the surface of a tripolyphosphate modified mesoporous indium tin-doped oxide electrode (nanoITO|P3). Electrochemical studies reveal that nITO|P3 electrodes catalyze the 2-electron interconversion between UO22+ and U4+ with the P3-ligand assisting in the rate-limiting proton-coupled reduction of U(V) to U(IV), based on the kinetic isotope effect (1.8). Product composition between nITO|P3(U4+) and surface adsorbed UO2 can be controlled by adjusting the proton concentration and/or scan rate in voltammograms. These studies with uranium suggest that nITO|P3 electrodes are good candidates for redox transformations with other actinides including neptunium, plutonium, and americium.

Indium Tin-Doped Oxide (ITO) as a High Activity Water Oxidation Photoanode.

Photochemical water oxidation was carried out at a mesoporous nanoparticle film composed of indium tin-doped oxide (nanoITO). Annealing nanoITO at temperatures above 250 °C affects both conducting and semiconducting properties. Impressive photoelectrochemical activity was observed at this degenerate n-type semiconductor electrode, outperforming the traditional semiconductor titanium dioxide (TiO2) under the same conditions. In a 0.1 M HNO3 solution, the nanoITO electrode sustained photocurrents of 1.0 mA/cm2 at an Eapplied = 1.5 V vs saturated calomel electrode (SCE) (η = 0.55 V) under a 90 mW/cm2 UV illumination (375 nm). This activity is compared to ∼0.3 mA/cm2 with a traditional TiO2 electrode under the same potential and conditions. Evidence for oxygen generation in the photolysis experiments was quantified using the collector-generator method, and >70% photocurrent efficiency for O2 production was confirmed at this nanoITO photoanode.

Chemical approaches to artificial photosynthesis: A molecular, dye-sensitized photoanode for O2 production prepared by layer-by-layer self-assembly.

We describe here the preparation of a family of photoanodes for water oxidation that incorporate an electron acceptor-chromophore-catalyst in single molecular assemblies on nano-indium tin oxide (nanoITO) electrodes on fluorine-doped tin oxide (FTO). The assemblies were prepared by using a layer-by-layer, Atomic Layer Deposition (ALD), self-assembly approach. In the procedure, addition of an electron acceptor viologen derivative followed by a RuII(bpy) chromophore and a pyridyl derivative of the water oxidation catalyst [Ru(bda) (L)2] (bda = 2,2'-bipyridine-6,6'-dicarboxylate)2, were linked by ALD by addition of the bridge precursors TiO2, ZrO2, and Al2O3 as the bridging groups giving the assemblies, FTO|nanoITO|-MV2+-ALD MO2-RuP2 2+-ALD M'O2-WOC. In a series of devices, the most efficient gave water oxidation with an incident photon to current efficiency of 2.2% at 440 nm. Transient nanosecond absorption measurements on the assemblies demonstrated that the slow step in the intra-assembly electron transfer is the electron transfer from the chromophore through the viologen bridge to the nanoITO electrode.

A molecular tandem cell for efficient solar water splitting.

Artificial photosynthesis provides a way to store solar energy in chemical bonds. Achieving water splitting without an applied external potential bias provides the key to artificial photosynthetic devices. We describe here a tandem photoelectrochemical cell design that combines a dye-sensitized photoelectrosynthesis cell (DSPEC) and an organic solar cell (OSC) in a photoanode for water oxidation. When combined with a Pt electrode for H2 evolution, the electrode becomes part of a combined electrochemical cell for water splitting, 2H2O → O2 + 2H2, by increasing the voltage of the photoanode sufficiently to drive bias-free reduction of H+ to H2 The combined electrode gave a 1.5% solar conversion efficiency for water splitting with no external applied bias, providing a mimic for the tandem cell configuration of PSII in natural photosynthesis. The electrode provided sustained water splitting in the molecular photoelectrode with sustained photocurrent densities of 1.24 mA/cm2 for 1 h under 1-sun illumination with no applied bias.

A stable dye-sensitized photoelectrosynthesis cell mediated by a NiO overlayer for water oxidation.

In the development of photoelectrochemical cells for water splitting or CO2 reduction, a major challenge is O2 evolution at photoelectrodes that, in behavior, mimic photosystem II. At an appropriate semiconductor electrode, a water oxidation catalyst must be integrated with a visible light absorber in a stable half-cell configuration. Here, we describe an electrode consisting of a light absorber, an intermediate electron donor layer, and a water oxidation catalyst for sustained light driven water oxidation catalysis. In assembling the electrode on nanoparticle SnO2/TiO2 electrodes, a Ru(II) polypyridyl complex was used as the light absorber, NiO was deposited as an overlayer, and a Ru(II) 2,2'-bipyridine-6,6'-dicarboxylate complex as the water oxidation catalyst. In the final electrode, addition of the NiO overlayer enhanced performance toward water oxidation with the final electrode operating with a 1.1 mA/cm2 photocurrent density for 2 h without decomposition under one sun illumination in a pH 4.65 solution. We attribute the enhanced performance to the role of NiO as an electron transfer mediator between the light absorber and the catalyst.

Effect of Ionizing Radiation on the Redox Chemistry of Penta- and Hexavalent Americium.

The recent development of facile methods to oxidize trivalent americium to its higher valence states holds promise for the discovery of new chemistries and critical insight into the behavior of the 5f electrons. However, progress in understanding high-valent americium chemistry has been hampered by americium's inherent ionizing radiation field and its concomitant effects on americium redox chemistry. Any attempt to understand high-valent americium reduction and/or disproportionation must account for the effects of these radiolytic processes. Therefore, we present a complete, quantitative, mechanistic description of the radiation-induced redox chemistry of the americyl oxidation states in aerated, aqueous nitric acid, as a function of radiation quality (type and energy) and solution composition using multiscale modeling calculations supported by experiment. The reduction of Am(VI) to Am(V) was found to be most sensitive to the effects of ionizing radiation, undergoing rapid reductions with the steady-state products of aqueous HNO3 radiolysis, i.e., HNO2, H2O2, and HO2•, which dictated its practical lifetime under acidic conditions. In contrast, Am(V) is only susceptible to radiolytic oxidation, mainly through its reactions with NO3•, and is notably radiation-resistant with respect to direct one-electron reduction to produce Am(IV). Our multiscale modeling calculations predict that the lifetime of Am(V) is dictated by its rate of disproportionation, 2AmO2+ + 4Haq+ → AmO22+ + Am4+ + 2H2O, with a fourth-order dependence on [Haq+] in agreement with previous experimental findings, giving an optimized rate coefficient of k = 2.27 × 10-6 M-5 s-1. This disproportionation initially produces Am(IV) and Am(VI) species, but the lack of any spectroscopic evidence in our study for Am(IV) suggests that solvent reduction of this cation occurs rapidly. The ultimate product of all the Am(VI)/Am(V) irradiations is Am(III), which shows great stability in an irradiation field.

A donor-chromophore-catalyst assembly for solar CO2 reduction.

We describe here the preparation and characterization of a photocathode assembly for CO2 reduction to CO in 0.1 M LiClO4 acetonitrile. The assembly was formed on 1.0 µm thick mesoporous films of NiO using a layer-by-layer procedure based on Zr(iv)-phosphonate bridging units. The structure of the Zr(iv) bridged assembly, abbreviated as NiO|-DA-RuCP2 2+-Re(i), where DA is the dianiline-based electron donor (N,N,N',N'-((CH2)3PO3H2)4-4,4'-dianiline), RuCP2+ is the light absorber [Ru((4,4'-(PO3H2CH2)2-2,2'-bipyridine)(2,2'-bipyridine))2]2+, and Re(i) is the CO2 reduction catalyst, ReI((4,4'-PO3H2CH2)2-2,2'-bipyridine)(CO)3Cl. Visible light excitation of the assembly in CO2 saturated solution resulted in CO2 reduction to CO. A steady-state photocurrent density of 65 µA cm-2 was achieved under one sun illumination and an IPCE value of 1.9% was obtained with 450 nm illumination. The importance of the DA aniline donor in the assembly as an initial site for reduction of the RuCP2+ excited state was demonstrated by an 8 times higher photocurrent generated with DA present in the surface film compared to a control without DA. Nanosecond transient absorption measurements showed that the expected reduced one-electron intermediate, RuCP+, was formed on a sub-nanosecond time scale with back electron transfer to the electrode on the microsecond timescale which competes with forward electron transfer to the Re(i) catalyst at t 1/2 = 2.6 µs (k ET = 2.7 × 105 s-1).

Molecular Photoelectrode for Water Oxidation Inspired by Photosystem II.

In artificial photosynthesis, the sun drives water splitting into H2 and O2 or converts CO2 into a useful form of carbon. In most schemes, water oxidation is typically the limiting half-reaction. Here, we introduce a molecular approach to the design of a photoanode that incorporates an electron acceptor, a sensitizer, an electron donor, and a water oxidation catalyst in a single molecular assembly. The strategy mimics the key elements in Photosystem II by initiating light-driven water oxidation with integration of a light absorber, an electron acceptor, an electron donor, and a catalyst in a controlled molecular environment on the surface of a conducting oxide electrode. Visible excitation of the assembly results in the appearance of reductive equivalents at the electrode and oxidative equivalents at a catalyst that persist for seconds in aqueous solutions. Steady-state illumination of the assembly with 440 nm light with an applied bias results in photoelectrochemical water oxidation with a per-photon absorbed efficiency of 2.3%. The results are notable in demonstrating that light-driven water oxidation can be carried out at a conductive electrode in a structure with the functional elements of Photosystem II including charge separation and water oxidation.

Electrochemical oxidation of trivalent americium using a dipyrazinylpyridine modified ITO electrode.

We present here the electrochemical oxidation of Am(iii) to AmVO2+ and AmVIO22+ in pH 1 nitric acid using a mesoporous tin-doped indium oxide electrode modified with a covalently attached dipyrazinylpyridine ligand. The applied potential affects the distribution of Am oxidation products. At potential 1.8 V, only Am(v) is observed, while increasing the potential to as much as 2.0 V, results in oxidation of Am(iii) to Am(v) and subsequent oxidation of Am(v) to Am(vi). At applied potentials >2.0 V, Am(iii) is oxidized to Am(v), while Am(vi) is reduced to Am(v). The latter reduction reaction is likely due to the increased rate of hydrogen peroxide formation from the 2-electron oxidation of water at the electrode at these high potentials. The development of future ligand modified electrodes for actinide oxidations must consider how they facilitate Am oxidations while disfavoring unwanted or competing reactions.

Soft-donor dipicolinamide derivatives for selective actinide(iii)/lanthanide(iii) separation: the role of S- vs. O-donor sites.

Selectivity for An(iii) vs. Ln(iii) binding and extraction using dipicolinamide analogs containing the C[double bond, length as m-dash]O vs. C[double bond, length as m-dash]S groups was investigated in solution and the gas-phase, and by DFT calculations. The results show higher selectivity for complex formation and extraction for Am(iii) vs. Eu(iii) for the softer dithioamide vs. the diamide ligand, while in CH3CN the diamide binds more strongly than the thioamide to several Ln(iii), forming 1 : 1 complexes.

Stabilized photoanodes for water oxidation by integration of organic dyes, water oxidation catalysts, and electron-transfer mediators.

Stabilized photoanodes for light-driven water oxidation have been prepared on nanoparticle core/shell electrodes with surface-stabilized donor-acceptor chromophores, a water oxidation catalyst, and an electron-transfer mediator. For the electrode, fluorine-doped tin oxide FTO|SnO2/TiO2|-Org1-|1.1 nm Al2O3|-RuP2+-WOC (water oxidation catalyst) with Org1 (1-cyano-2-(4-(diphenylamino)phenyl)vinyl)phosphonic acid), the mediator RuP2+ ([Ru(4,4-(PO3H2)2-2,2-bipyridine)(2,2-bipyridine)2]2+), and the WOC, Ru(bda)(py(CH2)(3or10)P(O3H)2)2 (bda is 2,2-bipyridine-6,6-dicarboxylate with x = 3 or 10), solar excitation resulted in photocurrents of ∼500 µA/cm2 and quantitative O2 evolution at pH 4.65. Related results were obtained for other Ru(II) polypyridyl mediators. For the organic dye PP (5-(4-(dihydroxyphosphoryl)phenyl)-10,15,20-Tris(mesityl)porphyrin), solar water oxidation occurred with a driving force near 0 V.

Light-Driven Water Splitting Mediated by Photogenerated Bromine.

Light-driven water splitting was achieved using a dye-sensitized mesoporous oxide film and the oxidation of bromide (Br- ) to bromine (Br2 ) or tribromide (Br3- ). The chemical oxidant (Br2 or Br3- ) is formed during illumination at the photoanode and used as a sacrificial oxidant to drive a water oxidation catalyst (WOC), here demonstrated using [Ru(bda)(pic)2 ], (1; pic=picoline, bda=2,2'-bipyridine-6,6'-dicarboxylate). The photochemical oxidation of bromide produces a chemical oxidant with a potential of 1.09 V vs. NHE for the Br2 /Br- couple or 1.05 V vs. NHE for the Br3- /Br- couple, which is sufficient to drive water oxidation at 1 (RuV/IV ≈1.0 V vs. NHE at pH 5.6). At pH 5.6, using a 0.2 m acetate buffer containing 40 mm LiBr and the [Ru(4,4'-PO3 H2 -bpy)(bpy)2 ]2+ (RuP2+ , bpy=2,2'-bipyridine) chromophore dye on a SnO2 /TiO2 core-shell electrode resulted in a photocurrent density of around 1.2 mA cm-2 under approximately 1 Sun illumination and a Faradaic efficiency upon addition of 1 of 77 % for oxygen evolution.

CO2 reduction to acetate in mixtures of ultrasmall (Cu) n ,(Ag) m bimetallic nanoparticles.

Monodispersed mixtures of 6-nm Cu and Ag nanoparticles were prepared by electrochemical reduction on electrochemically polymerized poly-Fe(vbpy)3(PF6)2 film electrodes on glassy carbon. Conversion of the complex to poly-Fe(vbpy)2(CN)2 followed by surface binding of salts of the cations and electrochemical reduction gave a mixture of chemically distinct clusters on the surface, (Cu) m ,(Ag) n |polymer|glassy carbon electrode (GCE), as shown by X-ray photoelectron spectroscopy (XPS) measurements. A (Cu)2,(Ag)3|(80-monolayer-poly-Fe(vbpy)32+|GCE electrode at -1.33 V vs. reversible hydrogen electrode (RHE) in 0.5 M KHCO3, with 8 ppm added benzotriazole (BTA) at 0 °C, gave acetate with a faradaic efficiency of 21.2%.

Interfacial Deposition of Ru(II) Bipyridine-Dicarboxylate Complexes by Ligand Substitution for Applications in Water Oxidation Catalysis.

Water oxidation is a critical step in artificial photosynthesis and provides the protons and electrons used in reduction reactions to make solar fuels. Significant advances have been made in the area of molecular water oxidation catalysts with a notable breakthrough in the development of Ru(II) complexes that use a planar "bda" ligand (bda is 2,2'-bipyridine-6,6'-dicarboxylate). These Ru(II)(bda) complexes show lower overpotentials for driving water oxidation making them ideal for light-driven applications with a suitable chromophore. Nevertheless, synthesis of heterogeneous Ru(II)(bda) complexes remains challenging. We discuss here a new "bottom-up" synthetic method for immobilizing these catalysts at the surface of a photoanode for use in a dye-sensitized photoelectrosynthesis cell (DSPEC). The procedure provides a basis for rapidly screening the role of ligand variations at the catalyst in order to understand the impact on device performance. The best results of a water-oxidation DSPEC photoanode based on this procedure reached 1.4 mA/cm2 at pH 7 in 0.1 M [PO4H2]-/[PO4H]2-solution with minimal loss in catalytic behavior over 30 min, and produced an incident photon to current efficiency (IPCE) of 24.8% at 440 nm.

Layer-by-Layer Molecular Assemblies for Dye-Sensitized Photoelectrosynthesis Cells Prepared by Atomic Layer Deposition.

In a dye sensitized photoelectrosynthesis cell (DSPEC), the relative orientation of the catalyst and chromophore plays an important role in determining the device efficiency. Here we introduce a new, robust atomic layer deposition (ALD) procedure for the preparation of molecular chromophore-catalyst assemblies on wide bandgap semiconductors. In this procedure, solution deposited, phosphonate derivatized metal complexes on metal oxide surfaces are treated with reactive metal reagents in the gas phase by ALD to form an outer metal ion bridging group, which can bind a second phosphonate containing species from solution to establish a R1-PO2-O-M-O-PO2-R2 type surface assembly. With the ALD procedure, assemblies bridged by Al(III), Sn(IV), Ti(IV), or Zr(IV) metal oxide units have been prepared. To evaluate the performance of this new type of surface assembly, intra-assembly electron transfer was investigated by transient absorption spectroscopy, and light-driven water splitting experiments under steady-state illumination were conducted. A SnO2 bridged assembly on SnO2/TiO2 core/shell electrodes undergoes light-driven water oxidation with an incident photon to current efficiency (IPCE) of 17.1% at 440 nm. Light-driven water reduction with a ruthenium trisbipyridine chromophore and molecular Ni(II) catalyst on NiO films was also used to produce H2. Compared to conventional solution-based procedures, the ALD approach offers significant advantages in scope and flexibility for the preparation of stable surface structures.

Plasmon-enhanced light-driven water oxidation by a dye-sensitized photoanode.

Dye-sensitized photoelectrosynthesis cells (DSPECs) provide a flexible approach for solar water splitting based on the integration of molecular light absorption and catalysis on oxide electrodes. Recent advances in this area, including the use of core/shell oxide interfacial structures and surface stabilization by atomic layer deposition, have led to improved charge-separation lifetimes and the ability to obtain substantially improved photocurrent densities. Here, we investigate the introduction of Ag nanoparticles into the core/shell structure and report that they greatly enhance light-driven water oxidation at a DSPEC photoanode. Under 1-sun illumination, Ag nanoparticle electrodes achieved high photocurrent densities, surpassing 2 mA cm-2 with an incident photon-to-current efficiency of 31.8% under 450-nm illumination.

Kinetics of the Autoreduction of Hexavalent Americium in Aqueous Nitric Acid.

The rate of reduction of hexavalent 243Am due to self-radiolysis was measured across a range of total americium and nitric acid concentrations. These so-called autoreduction rates exhibited zero-order kinetics with respect to the concentration of hexavalent americium, and pseudo-first-order kinetics with respect to the total concentration of americium. However, the rate constants did vary with nitric acid concentration, resulting in values of 0.0048 ± 0.0003, 0.0075 ± 0.0005, and 0.0054 ± 0.0003 h-1 for 1.0, 3.0, and 6.5 M HNO3, respectively. This indicates that reduction is due to reaction of hexavalent americium with the radiolysis products of total americium decay. The concentration changes of Am(III), Am(V), and Am(VI) were determined by UV-vis spectroscopy. The Am(III) molar extinction coefficients are known; however, the unknown values for the Am(V) and Am(VI) absorbances across the studied range of nitric acid concentrations were determined by sensitivity analysis in which a mass balance with the known total americium concentration was obtained. The new extinction coefficients and reduction rate constants have been tabulated here. Multiscale radiation chemical modeling using a reaction set with both known and optimized rate coefficients was employed to achieve excellent agreement with the experimental results, and indicates that radiolytically produced nitrous acid from nitric acid radiolysis and hydrogen peroxide from water radiolysis are the important reducing agents. Since these species also react with each other, modeling indicated that the highest concentrations of these species available for Am(VI) reduction occurred at 3.0 M HNO3. This is in agreement with the empirical finding that the highest rate constant for autoreduction occurred at the intermediate acid concentration.

Finding the Way to Solar Fuels with Dye-Sensitized Photoelectrosynthesis Cells.

The dye-sensitized photoelectrosynthesis cell (DSPEC) integrates high bandgap, nanoparticle oxide semiconductors with the light-absorbing and catalytic properties of designed chromophore-catalyst assemblies. The goals are photoelectrochemical water splitting into hydrogen and oxygen and reduction of CO2 by water to give oxygen and carbon-based fuels. Solar-driven water oxidation occurs at a photoanode and water or CO2 reduction at a cathode or photocathode initiated by molecular-level light absorption. Light absorption is followed by electron or hole injection, catalyst activation, and catalytic water oxidation or water/CO2 reduction. The DSPEC is of recent origin but significant progress has been made. It has the potential to play an important role in our energy future.

Two Electrode Collector-Generator Method for the Detection of Electrochemically or Photoelectrochemically Produced O2.

A dual working electrode technique for the in situ production and quantification of electrochemically or photoelectrochemically produced O2 is described. This technique, termed a collector-generator cell, utilizes a transparent fluorine doped tin oxide electrode to sense O2. This setup is specifically designed for detecting O2 in dye sensitized photoelectrosynthesis cells.