Elastic modulus and stress-transfer properties of tunicate cellulose whiskers.

Experimental deformation micromechanics of natural cellulose fibers using Raman spectroscopy and X-ray diffraction have been widely reported. However, little has been published on the direct measurements of the mechanical properties, and in particular the elastic modulus, of the highly crystalline material in the native state. Here we report on measurements of the elastic modulus of tunicate cellulose using a Raman spectroscopic technique. A dispersed sample of the material is deformed using a four-point bending test, and a shift in a characteristic Raman band (located at 1095 cm(-1)) is used as an indication of the stress in the material. Relatively little intensity change of the Raman band located at 1095 cm(-1) is shown to occur for samples oriented parallel and perpendicular to the polarization direction of the laser, as compared to a highly oriented flax sample. This indicates that the tunicate sample is a two-dimensional in-plane random network of fibers. By use of this result, the Raman shift, and calibrations with strain from other materials, it is shown that the modulus of the material is very high, at about 143 GPa, and a lack of Raman band broadening is thought to be due to the fact that there is pure crystalline deformation occurring without the effect of crystalline/amorphous fractions. A strain sensitivity of the shift in the 1095-cm(-1) Raman peak for this specimen is shown to be -2.4 +/- 0.2 cm(-1)/%. A molecular mechanics approach, using computer simulation and an empirical force field, was used to predict the modulus of a highly oriented chain of the material, and this is found to be 145 GPa, which is in agreement with the experimental data. However, by use of a normal-mode analysis, it is found that a number of modes have positions close to the central positions of the experimental Raman band. One in particular is found to shift at a rate of 2.5 cm(-1)/%, but due to the complex nature of the structure, it is not entirely conclusive that this band is representative of the experimental findings.

Modeling crystal and molecular deformation in regenerated cellulose fibers.

Experimental deformation micromechanics of regenerated cellulose fibers using Raman spectroscopy have been widely reported. Here we report on computer modeling simulations of Raman band shifts in modes close to the experimentally observed 1095 cm(-1) band, which has previously been shown to shift toward a lower wavenumber upon application of external fiber deformation. A molecular mechanics approach is employed using a previously published model structure of cellulose II. Changing the equilibrium c-spacing of this structure and then performing a minimization routine mimics tensile deformation. Normal-mode analysis is then performed on the minimized structure to predict the Raman-intensive vibrations. By using a dot-product analysis on the predicted eigenvectors it is shown that some Raman active modes close to the 1095 cm(-1) band interchange at certain strain levels. Nevertheless, when this is taken into account it is shown that it is possible to find reasonable agreement between theory and experiment. The effect of the experimentally observed broadening of the Raman bands is discussed in terms of crystalline and amorphous regions of cellulose, and this is compared to the lack of X-ray broadening to explain why discrepancies between theory and experiment are present. A hybrid model structure with a series-parallel arrangement of amorphous and misaligned amorphous-crystalline domains is proposed which is shown to agree with what is observed experimentally. Finally, the theoretical crystal modulus for cellulose II is reported as 98 GPa, which is shown to be in agreement with other studies and with an experimental measurement using synchrotron X-ray diffraction.

Fabrication and Characterization of Self-Assembled Nanoparticle/Polyelectrolyte Multilayer Films.

The formation of multilayer films of organothiol-stabilized gold nanoparticles and polyelectrolyte, synthesized using the "layer-by-layer" technique, has been investigated. The formation of such films requires the alternation of surface charge with each layer deposited and is thus amenable to study by the Kelvin probe technique. The early stages of multilayer film formation have been studied using a combination of X-ray photoelectron spectroscopy, spectroscopic ellipsometry, and Kelvin probe microscopy. Our results suggest that the polyelectrolyte/nanoparticle film can be considered as a wide-band-gap semiconductor with a depletion width, at the substrate/film interface, extending several nanometers into the film. From our ellipsometry data, we are able to provide optical constants for these hybrid organic/inorganic films.