The discovery of allyltyrosine based tripeptides as selective inhibitors of the HIV-1 integrase strand-transfer reaction.

From library screening of synthetic antimicrobial peptides, an O-allyltyrosine-based tripeptide was identified to possess inhibitory activity against HIV-1 integrase (IN) exhibiting an IC50 value of 17.5 µM in a combination 3'-processing and strand transfer microtitre plate assay. The tripeptide was subjected to structure-activity relationship (SAR) studies with 28 peptides, incorporating an array of natural and non-natural amino acids. Resulting SAR analysis revealed the allyltyrosine residue was a key feature for IN inhibitory activity whilst incorporation of a lysine residue and extended hydrophilic chains bearing a terminal methyl ester was advantageous. Addition of hydrophobic aromatic moieties to the N-terminal of the scaffold afforded compounds with improved inhibitory activity. Consolidation of these functionalities lead to the development of the tripeptide 96 which specifically inhibited the IN strand-transfer reaction with an IC50 value of 2.5 µM.

Interrogating HIV integrase for compounds that bind--a SAMPL challenge.

Tremendous gains and novel methods are often developed when people are challenged to do something new or difficult. This process is enhanced when people compete against each other-this can be seen in sport as well as in science and technology (e.g. the space race). The SAMPL challenges, like the CASP challenges, aim to challenge modellers and software developers to develop new ways of looking at molecular interactions so the community as a whole can progress in the accurate prediction of these interactions. In order for this challenge to occur, data must be supplied so the prospective test can be done. We have supplied unpublished data related to a drug discovery program run several years ago on HIV integrase for the SAMPL4 challenge. This paper describes the methods used to obtain these data and the chemistry involved.

Parallel screening of low molecular weight fragment libraries: do differences in methodology affect hit identification?

Fragment screening is becoming widely accepted as a technique to identify hit compounds for the development of novel lead compounds. In neighboring laboratories, we have recently, and independently, performed a fragment screening campaign on the HIV-1 integrase core domain (IN) using similar commercially purchased fragment libraries. The two campaigns used different screening methods for the preliminary identification of fragment hits; one used saturation transfer difference nuclear magnetic resonance spectroscopy (STD-NMR), and the other used surface plasmon resonance (SPR) spectroscopy. Both initial screens were followed by X-ray crystallography. Using the STD-NMR/X-ray approach, 15 IN/fragment complexes were identified, whereas the SPR/X-ray approach found 6 complexes. In this article, we compare the approaches that were taken by each group and the results obtained, and we look at what factors could potentially influence the final results. We find that despite using different approaches with little overlap of initial hits, both approaches identified binding sites on IN that provided a basis for fragment-based lead discovery and further lead development. Comparison of hits identified in the two studies highlights a key role for both the conditions under which fragment binding is measured and the criteria selected to classify hits.

Binaphthyl-anchored antibacterial tripeptide derivatives with hydrophobic C-terminal amino acid variations.

The facile synthesis of seven new dicationic tripeptide benzyl ester derivatives, with hydrophobic group variations in the C-terminal amino acid component, is described. Moderate to good activity was seen against Gram-positive bacteria in vitro. One cyclohexyl-substituted compound 2c was tested more widely and showed good potency (MIC values ranging from 2-4 µg/mL) against antibiotic-resistant strains of Staphylococcus aureus and Enterococci (VRE, VSE), and against Staphylococcus epidermidis.

Small molecule inhibitors of the LEDGF site of human immunodeficiency virus integrase identified by fragment screening and structure based design.

A fragment-based screen against human immunodeficiency virus type 1 (HIV) integrase led to a number of compounds that bound to the lens epithelium derived growth factor (LEDGF) binding site of the integrase catalytic core domain. We determined the crystallographic structures of complexes of the HIV integrase catalytic core domain for 10 of these compounds and quantitated the binding by surface plasmon resonance. We demonstrate that the compounds inhibit the interaction of LEDGF with HIV integrase in a proximity AlphaScreen assay, an assay for the LEDGF enhancement of HIV integrase strand transfer and in a cell based assay. The compounds identified represent a potential framework for the development of a new series of HIV integrase inhibitors that do not bind to the catalytic site of the enzyme.

Crystal structures of novel allosteric peptide inhibitors of HIV integrase identify new interactions at the LEDGF binding site.

An optimised method of solution cyclisation gave us access to a series of peptides including SLKIDNLD (2). We investigated the crystallographic complexes of the HIV integrase (HIV-IN) catalytic core domain with 13 of the peptides and identified multiple interactions at the binding site, including hydrogen bonds with residues Thr125 and Gln95, that have not previously been described as being accessible within the binding site. We show that the peptides inhibit the interaction of lens epithelium-derived growth factor (LEDGF) with HIV-IN in a proximity AlphaScreen assay and in an assay for the LEDGF enhancement of HIV-IN strand transfer. The interactions identified represent a potential framework for the development of new HIV-IN inhibitors.

Synthesis and antibacterial activity of C2-symmetric binaphthyl scaffolded amino acid derivatives.

The synthesis of eleven novel antibacterial agents is reported. The structures are based on a C(2)-symmetric binaphthyl scaffold which holds two identical chains consisting of a short linker, a basic amino acid and a small hydrophobic side chain. Antibacterial activity is revealed for a number of derivatives down to an MIC of 2 µg/mL (2 µM) against Staphylococcus aureus--comparable to vancomycin, and an MIC of 31 µg/mL (31 µM) against some vancomycin-resistant enterococcal strains.

Structural basis for a new mechanism of inhibition of HIV-1 integrase identified by fragment screening and structure-based design.

BACKGROUND: HIV-1 integrase is a clinically validated therapeutic target for the treatment of HIV-1 infection, with one approved therapeutic currently on the market. This enzyme represents an attractive target for the development of new inhibitors to HIV-1 that are effective against the current resistance mutations. METHODS: A fragment-based screening method employing surface plasmon resonance and NMR was initially used to detect interactions between integrase and fragments. The binding sites of the fragments were elucidated by crystallography and the structural information used to design and synthesize improved ligands. RESULTS: The location of binding of fragments to the catalytic core of integrase was found to be in a previously undescribed binding site, adjacent to the mobile loop. Enzyme assays confirmed that formation of enzyme-fragment complexes inhibits the catalytic activity of integrase and the structural data was utilized to further develop these fragments into more potent novel enzyme inhibitors. CONCLUSIONS: We have defined a new site in integrase as a valid region for the structure-based design of allosteric integrase inhibitors. Using a structure-based design process we have improved the activity of the initial fragments 45-fold.

Synthesis and antibacterial activity of some binaphthyl-supported macrocycles containing a cationic amino acid.

As part of a programme investigating antibacterial cyclic macrocycles containing a cationic amino acid with an internal aromatic hydrophobic scaffold, we previously reported a macrocycle anchored at the 3,3'-positions of a 1,1'-binaphthyl unit. This was prepared via key intermediates containing an internal allylglycine and an allyl-substituted binaphthyl unit for a subsequent ring-closing metathesis reaction. This paper presents some structure-activity relationship studies with additional macrocycles based on this lead compound against Staphylococcus aureus together with the antibacterial activity of two related acyclic compounds.

Discovery of potent HIV integrase inhibitors active against raltegravir resistant viruses.

A series of novel HIV integrase inhibitors active against rategravir resistant strains are reported. Initial SAR studies revealed that activities against wild-type virus were successfully maintained at single digit nanomolar level with a wide range of substitutions. However, inclusion of nitrogen-based cyclic substitutions was crucial for achieving potency against mutant viruses. Several compounds with excellent activities against wild-type virus as well as against the viruses with the mutations Q148H/G140S or N155H/E92Q were reported.

Studies on the structure-activity relationship of 1,3,3,4-tetra-substituted pyrrolidine embodied CCR5 receptor antagonists. Part 2: Discovery of highly potent anti-HIV agents.

Modification of 1,3,3,4-tetra-substituted pyrrolidine embodied CCR5 receptor antagonists revealed that introducing a fluoro group at the 3-position of the 3-phenyl group to reduce metabolism did not adversely affect the high potency against HIV infection, and that replacing the piperidine ring with a tropane ring could deliver the most potent anti-HIV agents. Stereochemistry of the substituted tropane ring is essential for maintaining the potent anti-HIV activity because only exo-isomers displayed subnanomolar whole cell activity.

Design of a series of bicyclic HIV-1 integrase inhibitors. Part 1: selection of the scaffold.

HIV integrase inhibitors based on a novel bicyclic pyrimidinone core is presented. Nine variations of the core scaffold are evaluated leading to optimization of the 6:6 core giving compound 48 with an EC(50) of 3 nM against wild type HIV infected T-cells.

Design of a series of bicyclic HIV-1 integrase inhibitors. Part 2: azoles: effective metal chelators.

Synthesis of a diverse set of azoles and their utilizations as an amide isostere in the design of HIV integrase inhibitors is described. The Letter identified thiazole, oxazole, and imidazole as the most promising heterocycles. Initial SAR studies indicated that these novel series of integrase inhibitors are amenable to lead optimization. Several compounds with low nanomolar inhibitory potency are reported.

Synthesis and antibacterial studies of binaphthyl-based tripeptoids. Part 2.

A compact synthesis of 15 new binaphthyl-based dicationic tripeptoids and one biphenyl based dicationic tripeptoid is described. Fourteen of these tripeptoids resulted from variation of the C-2' ether substituent of the binaphthyl unit. An O-iso-butyl ether binaphthyl derivative was found to be the most active against Staphylococcus aureus (MIC 1.95 µg/mL). The biphenyl analogue also showed good activity against S. aureus (MIC 1.95 µg/mL). These compounds, however, were less active against four vancomycin-resistant strains of enterococci (VRE) than some of our previously developed compounds that had an O-iso-pentyl ether substituent on the binaphthyl unit and a C-2 L-Leu moiety.

Studies on the structure-activity relationship of 1,3,3,4-tetra-substituted pyrrolidine embodied CCR5 receptor antagonists. Part 1: Tuning the N-substituents.

A novel series of CCR5 antagonists has been identified, utilizing the lead, nifeviroc, which were further modified based on bioisosteric principles. Lead optimization was pursued by balancing potential toxicity and potency. Potent analogues with low toxic properties were successfully developed by formation of urea and amide bonds at the nitrogen at position 4- of the pyrrolidine ring.

Synthesis and antibacterial studies of binaphthyl-based tripeptoids. Part 1.

An efficient synthesis of 29 new binaphthyl-based neutral, and mono- and di-cationic, peptoids is described. Some of these compounds had antibacterial activities with MIC values of 1.9-3.9microg/mL against Staphylococcus aureus. One peptoid had a MIC value of 6microg/mL against a methicillin-resistant strain of S. aureus (MRSA) and a MIC value of 2microg/mL against vancomycin-resistant strains of enterococci (VRE).

Crystal structure of the HIV-1 integrase core domain in complex with sucrose reveals details of an allosteric inhibitory binding site.

HIV integrase (IN) is an essential enzyme in HIV replication and an important target for drug design. IN has been shown to interact with a number of cellular and viral proteins during the integration process. Disruption of these important interactions could provide a mechanism for allosteric inhibition of IN. We present the highest resolution crystal structure of the IN core domain to date. We also present a crystal structure of the IN core domain in complex with sucrose which is bound at the dimer interface in a region that has previously been reported to bind integrase inhibitors.

Microwave-promoted synthesis of 3-amino-substituted 1,2-benzisoxazoles.

BACKGROUND: 1,2-benzisoxazole derivatives have been the focus of numerous studies, due to their biological and chemical interest. RESULTS: We demonstrate an efficient synthesis of a series of 3-amino-substituted 1,2-benzisoxazoles from a 3-chloro-1,2-benzisoxazole by microwave-promoted nucleophilic aromatic substitution. The 3-amino-1,2-benzisoxazoles prepared were obtained in 1-6 h in good-to-high yields of 54-90%. The 3-chloro-1,2-benzisoxazoles were also prepared by heating with microwave irradiation in quantitative yields in 2 h, from the corresponding 3-hydroxy-1,2-benzisoxazoles. CONCLUSION: This efficient microwave-assisted pathway could be applied to a variety of substrates in the further development of substituted 1,2-benzisoxazoles.