Genome Sequence of Stachybotrys chartarum Strain 51-11.

The Stachybotrys chartarum strain 51-11 genome was sequenced by shotgun sequencing utilizing Illumina HiSeq 2000 and PacBio technologies. Since S. chartarum has been implicated as having health impacts within water-damaged buildings, any information extracted from the genomic sequence data relating to toxins or the metabolism of the fungus might be useful.

Detection of Stachybotrys chartarum using rRNA, tri5, and beta-tubulin primers and determining their relative copy number by real-time PCR.

Highly conserved regions are attractive targets for detection and quantitation by PCR, but designing species-specific primer sets can be difficult. Ultimately, almost all primer sets are designed based upon literature searches in public domain databases, such as the National Center for Biotechnology Information (NCBI). Prudence suggests that the researcher needs to evaluate as many sequences as available for designing species-specific PCR primers. In this report, we aligned 11, 9, and 16 DNA sequences entered for Stachybotrys spp. rRNA, tri5, and beta-tubulin regions, respectively. Although we were able to align and determine consensus primer sets for the 9 tri5 and the 16 beta-tubulin sequences, there was no consensus sequence that could be derived from alignment of the 11 rRNA sequences. However, by judicious clustering of the sequences that aligned well, we were able to design three sets of primers for the rRNA region of S. chartarum. The two primer sets for tri5 and beta-tubulin produced satisfactory PCR results for all four strains of S. chartarum used in this study whereas only one rRNA primer set of three produced similar satisfactory results. Ultimately, we were able to show that rRNA copy number is approximately 2-log greater than for tri5 and beta-tubulin in the four strains of S. chartarum tested.

Testing antimicrobial cleaner efficacy on gypsum wallboard contaminated with Stachybotrys chartarum.

GOAL, SCOPE AND BACKGROUND: Reducing occupant exposure to indoor mold is the goal of this research, through the efficacy testing of antimicrobial cleaners. Often mold contaminated building materials are not properly removed, but instead surface cleaners are applied in an attempt to alleviate the problem. The efficacy of antimicrobial cleaners to remove, eliminate or control mold growth on surfaces can easily be tested on non-porous surfaces. However, the testing of antimicrobial cleaner efficacy on porous surfaces, such as those found in the indoor environment such as gypsum board can be more complicated and prone to incorrect conclusions regarding residual organisms. The mold Stachybotrys chartarum has been found to be associated with idiopathic pulmonary hemorrhage in infants and has been studied for toxin production and its occurrence in water damaged buildings. Growth of S. chartarum on building materials such as gypsum wallboard has been frequently documented. METHODS: Research to control S. chartarum growth using 13 separate antimicrobial cleaners on contaminated gypsum wallboard has been performed in laboratory testing. Popular brands of cleaning products were tested by following directions printed on the product packaging. RESULTS: A variety of gypsum wallboard surfaces were used to test these cleaning products at high relative humidity. The results indicate differences in antimicrobial efficacy for the six month period of testing. DISCUSSION: Results for the six types of GWB surfaces varied extensively. However, three cleaning products exhibited significantly better results than others. Lysol All-Purpose Cleaner-Orange Breeze (full strength) demonstrated results which ranked among the best in five of the six surfaces tested. Both Borax and Orange Glo Multipurpose Degreaser demonstrated results which ranked among the best in four of the six surfaces tested. CONCLUSIONS: The best antimicrobial cleaner to choose is often dependent on the type of surface to be cleaned of S. chartarum contamination. For Plain GWB, no paint, the best cleaners were Borax, Lysol All-Purpose Cleaner-Orange Breeze (full strength), Orange Glo Multipurpose Degreaser, and Fantastik Orange Action. RECOMMENDATIONS AND PERSPECTIVES: These results are not meant to endorse the incomplete removal of mold contaminated building materials. However, it is recognized that complete removal may not always be possible and solutions to control mold regrowth may contribute to reduced occupant exposure. Current recommendations of removal and replacement of porous building materials should be followed. It is not the intension of this discussion to endorse any product. Reporting on the performance of these products under the stated conditions was and remains the only purpose.

A simple polymerase chain reaction-sequencing analysis capable of identifying multiple medically relevant filamentous fungal species.

Due to the accumulating evidence that suggests that numerous unhealthy conditions in the indoor environment are the result of abnormal growth of the filamentous fungi (mold) in and on building surfaces it is necessary to accurately determine the organisms responsible for these maladies and to identify them in an accurate and timely manner. Historically, identification of filamentous fungal (mold) species has been based on morphological characteristics, both macroscopic and microscopic. These methods may often be time consuming and inaccurate, necessitating the development of identification protocols that are rapid, sensitive, and precise. To this end, we have devised a simple PAN-PCR approach which when coupled to cloning and sequencing of the clones allows for the unambiguous identification of multiple fungal organisms. Universal primers are used to amplify ribosomal DNA sequences which are then cloned and transformed into Escherichia coli. Individual clones are then sequenced and individual sequences analyzed and organisms identified. Using this method we were capable of identifying Stachybotrys chartarum, Penicillium purpurogenum, Aspergillus sydowii, and Cladosporium cladosporioides from a mixed culture. This method was found to be rapid, highly specific, easy to perform, and cost effective.

A simple polymerase chain reaction/restriction fragment length polymorphism assay capable of identifying medically relevant filamentous fungi.

Because of the accumulating evidence that suggests that numerous unhealthy conditions in the indoor environment are the result of abnormal growth of the filamentous fungi (mold) in and on building surfaces, it is necessary to accurately reflect the organisms responsible for these maladies and to identify them in precise and timely manner. To this end, we have developed a method that is cost effective, easy to perform, and accurate. We performed a simple polymerase chain reaction/restriction fragment length polymorphism (PCR/RFLP) analysis on multiple members of species known to negatively influence the indoor environment. The genera analyzed were Stachybotrys, Penicillium, Aspergillus, and Cladosporium. Each organism underwent PCR with universal primers that amplified ribosomal sequences generating products from 550 to 600 bp followed by enzymatic digestion with EcoRI, HaeIII, MspI, and HinfI. Our results show that using this combination of restriction enzymes enables the identification of these fungal organisms at the species level.

In vitro selection of phage RB69 RegA RNA binding sites yields UAA triplets.

The SELEX method of in vitro selection was used to isolate RNAs that bind the RB69 RegA translational repressor protein immobilized on Ni-NTA agarose. After five rounds of SELEX, the pool of selected RNA displayed striking sequence uniformity: UAAUAAUAAUAAUA was clearly enriched in the 14 nucleotides that underwent selection. Individual, cloned molecules displayed a repeating (UAA) sequence, with only two RNAs having a 3' AUG. Removing the 3' AUG slightly reduced binding in gel shift assays, moving the AUG 5' proximal of the (UAA) slightly improved binding, but (UAA)4 alone still bound the purified protein. Dissociation constants showed that RNA shortened to (UAA)3 and (UAA)2 also retained binding, whereas cytosine clearly prevented binding by RB69 RegA. Scanning of RB69 gene starts and ends with an RB69 RegA SELEX information weight matrix yielded 21 sequences as potential RegA sites. One site, on the mRNA for the pentameric (4:1) phage gp44/62 DNA polymerase clamp loader complex, has the RB69 gene 44 stop codon and 3'-adjacent gene 62 initiation codon in a sequence (GAAAUAAUAUG) that is similar to in vitro selected RNA and was shown to bind RB69 RegA. Sequences between the Shine-Dalgarno and initiation codon, which frequently contain a UAA stop codon of a 5'-adjacent gene, appear to be preferred RB69 RegA binding sites.

A simple multiplex polymerase chain reaction assay for the identification of four environmentally relevant fungal contaminants.

Historically, identification of filamentous fungal (mold) species has been based on morphological characteristics, both macroscopic and microscopic. These methods may often be time-consuming and inaccurate, necessitating the development of identification protocols that are rapid, sensitive, and precise. The polymerase chain reaction (PCR) has shown great promise in its ability to identify and quantify individual organisms from a mixed culture environment; however, the cost effectiveness of single organism PCR reactions is quickly becoming an issue. Our laboratory has developed a simple method to identify multiple fungal species, Stachybotrys chartarum, Aspergillus versicolor, Penicillium purpurogenum, and Cladosporium spp. by performing multiplex PCR and distinguishing the different reaction products by their mobility during agarose gel electrophoresis. The amplified genes include the beta-Tubulin gene from A. versicolor, the Tri5 gene from S. chartarum, and ribosomal sequences from both P. purpurogenum and Cladosporium spp. This method was found to be both rapid and easy to perform, while maintaining high sensitivity and specificity for characterizing isolates, even from a mixed culture.

A rapid DNA extraction method for PCR identification of fungal indoor air contaminants.

Following air sampling fungal DNA needs to be extracted and purified to a state suitable for laboratory use. Our laboratory has developed a simple method of extraction and purification of fungal DNA appropriate for enzymatic manipulation and Polymerase Chain Reaction (PCR) applications. The methodology described is both rapid and cost effective for use with multiple fungal organisms.