Performance and Impact of Crosslinking Level of Hierarchical Anion-Exchange Membranes on Demineralization of a Complex Food Solution by Electrodialysis.

Promising results were recently reported for hierarchical ion-exchange membranes, fabricated by the UV crosslinking of a thin functional coating on a porous substrate, on model NaCl solution demineralization by electrodialysis (ED). Hierarchical anion-exchange membranes (hAEMs) have never been tested with complex solutions to demonstrate their potential use in the biofood industry. The impact of three different crosslinking densities of the ion-exchange coating (EbN-1, EbN-2 and EbN-3) on the performances of whey demineralization by ED was investigated and compared with commercial AMX. The results showed that by increasing the coating crosslinking density, the membrane conductivity decreased, leading to an increase in the global system resistance during whey demineralization (from +28% to +64%). However, 18% sweet whey solutions were successfully treated until 70% demineralization for all membranes. The energy consumption (averaged EbN value of 14.8 vs. 15.1 Wh for AMX) and current efficiency (26.0 vs. 27.4%) were similar to the control. Potential fouling by non-protein nitrogen was detected by ATR-FTIR for hAEMs impacting some membranes properties and ED performances. Overall, EbN-1 obtained results were comparable with the benchmark and can be considered as an alternative membrane for whey demineralization by ED and other applications in the demineralization of complex products from the food industry.

Modified Membranes for Redox Flow Batteries-A Review.

In this review, the state of the art of modified membranes developed and applied for the improved performance of redox flow batteries (RFBs) is presented and critically discussed. The review begins with an introduction to the energy-storing chemical principles and the potential of using RFBs in the energy transition in industrial and transport-related sectors. Commonly used membrane modification techniques are briefly presented and compared next. The recent progress in applying modified membranes in different RFB chemistries is then critically discussed. The relationship between a given membrane modification strategy, corresponding ex situ properties and their impact on battery performance are outlined. It has been demonstrated that further dedicated studies are necessary in order to develop an optimal modification technique, since a modification generally reduces the crossover of redox-active species but, at the same time, leads to an increase in membrane electrical resistance. The feasibility of using alternative advanced modification methods, similar to those employed in water purification applications, needs yet to be evaluated. Additionally, the long-term stability and durability of the modified membranes during cycling in RFBs still must be investigated. The remaining challenges and potential solutions, as well as promising future perspectives, are finally highlighted.

Impact of Hierarchical Cation-Exchange Membranes' Chemistry and Crosslinking Level on Electrodialysis Demineralization Performances of a Complex Food Solution.

Hierarchical cation-exchange membranes (hCEMs) fabricated by blade coating and UV crosslinking of ionomer on top of a porous substrate demonstrated promising results in performing NaCl demineralization. In the food industry, complex solutions are used and hCEMs were never investigated before for these food applications. The performances of two different coating chemistries (urethane acrylate based: UL, and acrylic acid based: EbS) and three crosslinking degrees (UL5, UL6, UL7 for UL formulations, and EbS-1, EbS-2, EbS-3 for EbS formulations) were formulated. The impacts of hCEMs properties and crosslinking density on whey demineralization performances by electrodialysis (ED) were evaluated and compared to CMX, a high performing CEM for whey demineralization by ED. The crosslinking density had an impact on the hCEMs area specific resistance, and on the ionic conductance for EbS membrane. However, 70% demineralization of 18% whey solution was reached for the first time for hCEMs without any fouling observed, and with comparable performances to the CMX benchmark. Although some properties were impacted by the crosslinking density, the global performances in ED (limiting current, demineralization duration, global system resistance, energy consumption, current efficiency) for EbS and UL6 membranes were similar to the CMX benchmark. These promising results suggest the possible application of these hCEMs (UL6, EbS-2, and EbS-3) for whey demineralization by ED and more generally complex products as an alternative in the food industry.

Composite Anion Exchange Membranes Fabricated by Coating and UV Crosslinking of Low-Cost Precursors Tested in a Redox Flow Battery.

This paper presents a novel, cost-effective approach to the fabrication of composite anion exchange membranes (AEMs). Hierarchical AEMs have been fabricated by coating a porous substrate with an interpenetrating polymer network (IPN) layer where poly(vinylpyrrolidone) (PVP) is immobilized in a crosslinked matrix. The IPN matrix was formed by UV initiated radical crosslinking of a mixture of acrylamide-based monomers and acrylic resins. The fabricated membranes have been compared with a commercial material (Fumatech FAP 450) in terms of ionic transport properties and performance in a vanadium redox flow battery (VRFB). Measures of area-specific resistance (ASR) and vanadium permeability for the proposed membranes demonstrated properties approaching the commercial benchmark. These properties could be tuned by changing the content of PVP in the IPN coating. Higher PVP/matrix ratios facilitate a higher water uptake of the coating layer and thus lower ASR (as low as 0.58 Ω.cm2). On the contrary, lower PVP/matrix ratios allow to reduce the water uptake of the coating and hence decrease the vanadium permeability at the cost of a higher ASR (as high as 1.99 Ω.cm2). In VRFB testing the hierarchical membranes enabled to reach energy efficiency comparable with the commercial AEM (PVP_14-74.7%, FAP 450-72.7% at 80 mA.cm-2).