Effects of Cationic and Anionic Surfaces on the Perpendicular and Lateral Forces and Binding of Aspergillus niger Conidia.

The binding of conidia to surfaces is a prerequisite for biofouling by fungal species. In this study, Aspergillus niger subtypes 1957 and 1988 were used which produced differently shaped conidia (round or spikey respectively). Test surfaces were characterised for their surface topography, wettability, and hardness. Conidial assays included perpendicular and lateral force measurements, as well as attachment, adhesion and retention assays. Anionic surfaces were less rough (Ra 2.4 nm), less wettable (54°) and harder (0.72 GPa) than cationic surfaces (Ra 5.4 nm, 36° and 0.5 GPa, respectively). Perpendicular and lateral force assays demonstrated that both types of conidia adhered with more force to the anionic surfaces and were influenced by surface wettability. Following the binding assays, fewer A. niger 1957 and A. niger 1988 conidia bound to the anionic surface. However, surface wettability affected the density and dispersion of the conidia on the coatings, whilst clustering was affected by their spore shapes. This work demonstrated that anionic surfaces were more repulsive to A. niger 1998 spores than cationic surfaces were, but once attached, the conidia bound more firmly to the anionic surfaces. This work informs on the importance of understanding how conidia become tightly bound to surfaces, which can be used to prevent biofouling.

Quaternary ammonium-based coating of textiles is effective against bacteria and viruses with a low risk to human health.

While the global healthcare system is slowly recovering from the COVID-19 pandemic, new multi-drug-resistant pathogens are emerging as the next threat. To tackle these challenges there is a need for safe and sustainable antiviral and antibacterial functionalized materials. Here we develop an 'easy-to-apply' procedure for the surface functionalization of textiles, rendering them antiviral and antibacterial and assessing the performance of these textiles. A metal-free quaternary ammonium-based coating was applied homogeneously and non-covalently to hospital curtains. Abrasion, durability testing, and aging resulted in little change in the performance of the treated textile. Additionally, qualitative and quantitative antibacterial assays on Staphylococcus aureus, Pseudomonas aeruginosa, and Acinetobacter baumanii revealed excellent antibacterial activity with a CFU reduction of 98-100% within only 4 h of exposure. The treated curtain was aged 6 months before testing. Similarly, the antiviral activity tested according to ISO-18184 with murine hepatitis virus (MHV) showed > 99% viral reduction with the functionalized curtain. Also, the released active compounds of the coating 24 ± 5 µg mL-1 revealed no acute in vitro skin toxicity (IC50: 95 µg mL-1) and skin sensitization. This study emphasizes the potential of safe and sustainable metal-free textile coatings for the rapid antiviral and antibacterial functionalization of textiles.

Mechanism and kinetics of enzymatic degradation of polyester microparticles using a shrinking particle-shrinking core model.

Generalized shrinking particle (SPM) and shrinking core (SCM) models were developed to the kinetics of heterogenous enzymatic degradation of polymer microparticles in a continuous microflow system. This enzymatic degradation was performed in a microfluidic device designed to both physically separate and immobilize the microparticles. Then time-resolved measurements were made using image processing of the physical changes of the particles during degradation. The kinetics of enzyme-polymer intermediate formation, enzymatic bond cleavage, and enzyme diffusion through the layer of degraded substrate (SCM only) were mathematically derived to predict the time-resolved degradation of the substrate. The proposed models were tested against the degradation of 15-25 µm particles of polycaprolactone (PCL) and poly (butylene adipate-co-terephthalate) (PBAT) by cutinase enzyme from Humicola insolens. Degradation of PCL microparticles followed the SPM model and its kinetics were found to be zero-order, while the SCM model applied to PBAT microparticles showed first-order kinetics. Further, the degradation of polybutylene succinate (PBS), and poly butylene-sebacate-co-terephthalate (PBSeT) microparticles demonstrated wide applicability of the method. The use of image processing simplifies the required analysis by eliminating the need to remove aliquots or concentrate effluent for additional analytical characterization.

Screening the Degradation of Polymer Microparticles on a Chip.

Enzymatic degradation of polymers has advantages over standard degradation methods, such as soil burial and weathering, which are time-consuming and cannot provide time-resolved observations. We have developed a microfluidic device to study the degradation of single microparticles. The enzymatic degradation of poly (1,4-butylene adipate-co-terephthalate) (PBAT) microparticles was studied using Novozym 51032 cutinase. PBAT microparticles were prepared via an oil-in-water emulsion solvent removal method, and their morphology and chemical composition were characterized. Then, microparticles with varying diameters of 30-60 µm were loaded into the microfluidic chip. Enzyme solutions at different concentrations were introduced to the device, and changes in the size and transparency of PBAT microparticles were observed over time. The physicochemical properties of degraded products were analyzed by FT-IR, NMR, mass spectrometry, and differential scanning calorimetry. The degradation process was also performed in bulk, and the results were compared to those of the microfluidic method. Our analysis confirms that the degradation process in both bulk and microfluidic methods was similar. In both cases, degradation takes place on aliphatic and soft segments of PBAT. Our findings serve as a proof of concept for a microfluidic method for easy and time-resolved degradation analysis, with degradation results comparable to those of conventional bulk methods.

Lateral force removal of fungal spores to demonstrate how surface properties affect fungal spore retention.

Microbial biofouling on polymer surfaces can lead to their biodeterioration. This may result in deterioration of the surface, leading to cracking and fracturing. Fungal spores from Aspergillus niger 1957, Aspergillus niger 1988 and Aureobasidium pullulans were tested to determine their strength of attachment on three surfaces, p(γ-MPS-co-MMA), p(γ-MPS-co-LMA) and spin-coated poly(methyl methacrylate) (PMMAsc), using lateral force measurements. The results demonstrate that A. niger 1957 and A. niger 1988 spores were most easily removed from the p(γ-MPS-co-MMA) surface, which was the surface with the highest Ra value. The A. niger 1957 and A. pullulans spores were most difficult to remove from the PMMAsc surface, which was the hardest surface. A. niger 1988 spores were the most difficult to remove from p(γ-MPS-co-LMA), the most hydrophobic surface. The results with A. pullulans were difficult to elucidate since the spores bound to all three surfaces and were removed with similar rates of force. The lateral force results demonstrate that spore attachment to a surface is a multi-factorial process, and independent surface and microbial factors influence spore binding. Thus, each environmental scenario needs to be considered on an individual basis, since a solution to one biofouling issue will probably not translate across to other systems. This article is part of the theme issue 'Nanocracks in nature and industry'.

Microfluidic arrays of dermal spheroids: a screening platform for active ingredients of skincare products.

Organotypic micrometre-size 3D aggregates of skin cells (multicellular spheroids) have emerged as a promising in vitro model that can be utilized as an alternative of animal models to test active ingredients (AIs) of skincare products; however, a reliable dermal spheroid-based microfluidic (MF) model with a goal of in vitro AI screening is yet to be developed. Here, we report a MF platform for the growth of massive arrays of dermal fibroblast spheroids (DFSs) in a biomimetic hydrogel under close-to-physiological flow conditions and with the capability of screening AIs for skincare products. The DFSs formed after two days of on-chip culture and, in a case study, were used in a time-efficient manner for screening the effect of vitamin C on the synthesis of collagen type I and fibronectin. The computational simulation showed that the uptake of vitamin C was dominated by the advection flux. The results of screening the benchmark AI, vitamin C, proved that DFSs can serve as a reliable in vitro dermal model. The proposed DFS-based MF platform offers a high screening capacity for AIs of skincare products, as well as drug discovery and development in dermatology.

Diverse surface properties reveal that substratum roughness affects fungal spore binding.

Binding to surfaces by fungal spores is a prerequisite to biofilm formation. The interactions of polytetrafluoroethylene (PTFE), glass, and silicon with three fungal spores, of differing shapes and sizes (Aspergillus niger 1957, Aspergillus niger 1988, and Aureobasidium pullulans), were investigated. A multifractal analysis was conducted to provide quantitative measures of density, dispersion, and clustering of spores on the surfaces. The PTFE, glass, and silicon surfaces presented a range of surface topographies and wettabilities. PTFE was the roughest and most non-wettable surface, whereas silicon was the opposite in terms of both these aspects. The A. niger species were more non-wettable than A. pullulans. Overall, A. niger 1957 attached in higher numbers to PTFE, whereas A. niger 1988 and A. pullulans bound in highest numbers to glass. The results of this work demonstrated that the overall substratum surface roughness influenced spore binding rather than the physicochemical or chemical properties of surfaces or spores.

Use of spherical particles to understand conidial attachment to surfaces using atomic force microscopy.

Binding of particles and spores to surfaces is a natural phenomenon which is a prerequisite for biofilm formation. Perpendicular force measurements were carried out using atomic force microscopy cantilevers modified with a polystyrene or glass sphere. The attachment of the spheres was tested against glass, PVAc, p(γ-MPSco-MMA), p(γ-MPS-co-LMA), PMMAsc, and silicon surfaces. The polystyrene spheres demonstrated less varied force and strength of attachment measurement to the surfaces than the glass spheres. The force of attachment of the polystyrene spheres was also influenced by mobility of the co-polymer surfaces. Surface wettability did not affect the force of polystyrene or glass sphere attachment. The force measurements of the non-biological spheres were similar to those seen in biological systems with fungal conidia, and this was due to their size, shape, and binding energies. The use of non-biological systems may present an insight into understanding the fundamentals of more complex biological processes.

A Robust Aqueous Core-Shell-Shell Coconut-like Nanostructure for Stimuli-Responsive Delivery of Hydrophilic Cargo.

Conventional delivery systems for hydrophilic material still face critical challenges toward practical applications, including poor retention abilities, lack of stimulus responsiveness, and low bioavailability. Here, we propose a robust encapsulation strategy for hydrophilic cargo to produce a wide class of aqueous core-shell-shell coconut-like nanostructures featuring excellent stability and multifunctionality. The numerous active groups (-SH, -NH2, and -COOH) of the protein-polysaccharide wall material enable the formation of shell-cross-linked nanocapsules enclosing a liquid water droplet during acoustic cavitation. A subsequent pH switch can trigger the generation of an additional shell through the direct deposition of non-cross-linked protein back onto the cross-linked surface. Using anthocyanin as a model hydrophilic bioactive, these nanocapsules show high encapsulation efficiency, loading content, tolerance to environmental stresses, biocompatibility, and high cellular uptake. Moreover, the composite double shells driven by both covalent bonding and electrostatics provide the nanocapsules with pH/redox dual stimuli-responsive behavior. Our approach is also feasible for any shell material that can be cross-linked via ultrasonication, offering the potential to encapsulate diverse hydrophilic functional components, including bioactive molecules, nanocomplexes, and water-dispersible inorganic nanomaterials. Further development of this strategy should hold promise for designing versatile nanoengineered core-shell-shell nanoplatforms for various applications, such as the oral absorption of hydrophilic drugs/nutraceuticals and the smart delivery of therapeutics.

The effect of surface properties on the strength of attachment of fungal spores using AFM perpendicular force measurements.

Polymeric substrata may be biodegraded by fungal species resulting in damaged, weakened and unsightly materials. This process typically begins with fungal spore attachment to the surface. In order to better understand the processes that precedes a biofouling event, fungal spore attachment to a range of surfaces, was determined using perpendicular force measurements. This was carried out using atomic force microscope cantilevers modified with fungal spores from Aspergillus niger 1957 (5µm diameter, non-wettable, spherical), Aspergillus niger 1988 (5µm diameter non-wettable, spikey) or Aureobasidium pullulans (5µm-10µm sized, wettable, ellipsoidal). The strength of attachment of the spores was determined in combination with seven surfaces (nitric acid cleaned glass, cast poly(methylmethacrylate) sheet [c-PMMA], polytetrafluoroethylene [PTFE], silicon wafers spin coated with poly(3-methacryloxypropyltrimethoxy silane (γ-MPS)-co-methylmethacrylate (MMA)) [p(γ-MPS-co-MMA)], poly (γ-MPS-co-lauryl methacrylate) [p(γ-MPS-co-LMA)] [both in a ratio of 10-90], PMMA dissolved in a solvent [PMMAsc] and silicon wafers). Perpendicular force measurements could not be related to the R(a) values of the surfaces, but surface wettability was shown to have an effect. All three spore types interacted comparably with the surfaces. All spores attached strongly to c-PMMA and glass (wettable surfaces), and weakly to PTFE, (p(γ- MPS-co-LMA)) (non-wettable) and (p(γ-MPS-co-MMA)). Spore shape also affected the strength of attachment. Aureobasidium pullulans spores attached with the widest range of forces whilst A. niger 1957 attached with the smallest. Findings will inform the selection of surfaces for use in environments where biofouling is an important consideration.