Jupiter's interior and deep atmosphere: The initial pole-to-pole passes with the Juno spacecraft.

On 27 August 2016, the Juno spacecraft acquired science observations of Jupiter, passing less than 5000 kilometers above the equatorial cloud tops. Images of Jupiter's poles show a chaotic scene, unlike Saturn's poles. Microwave sounding reveals weather features at pressures deeper than 100 bars, dominated by an ammonia-rich, narrow low-latitude plume resembling a deeper, wider version of Earth's Hadley cell. Near-infrared mapping reveals the relative humidity within prominent downwelling regions. Juno's measured gravity field differs substantially from the last available estimate and is one order of magnitude more precise. This has implications for the distribution of heavy elements in the interior, including the existence and mass of Jupiter's core. The observed magnetic field exhibits smaller spatial variations than expected, indicative of a rich harmonic content.

H2O at the Phoenix landing site.

The Phoenix mission investigated patterned ground and weather in the northern arctic region of Mars for 5 months starting 25 May 2008 (solar longitude between 76.5 degrees and 148 degrees ). A shallow ice table was uncovered by the robotic arm in the center and edge of a nearby polygon at depths of 5 to 18 centimeters. In late summer, snowfall and frost blanketed the surface at night; H(2)O ice and vapor constantly interacted with the soil. The soil was alkaline (pH = 7.7) and contained CaCO(3), aqueous minerals, and salts up to several weight percent in the indurated surface soil. Their formation likely required the presence of water.

Waterproof versus cotton cast liners: a randomized, prospective comparison.

Casting injured extremities can cause complications (eg, itching, odor, rashes, skin maceration), many of which are associated with the inability to wash the extremity because of water retention and slow drying of conventional cast liners. A waterproof cast liner allows casts to become wet and perhaps improves hygiene and comfort. Fifty-nine patients (age, > or = 10 years) with upper or lower extremity injuries were randomized to a waterproof-liner group (n = 29) or a cotton-liner group (n = 30). Both groups had casts made of fiberglass tape. At each clinic visit, patients and physicians completed questionnaires evaluating comfort and skin condition, respectively. The waterproof-liner group had better scores for itch (P = .008), discomfort (P < .001), irritation (P = .002), overall patient score (P = .012), and overall physician score (P = .049).

Tobramycin-impregnated calcium sulfate prevents infection in contaminated wounds.

Open fractures often are associated with increased rates of infection and nonunion, multiple surgical procedures, and delayed return to preinjury activity. Antimicrobial bone graft substitutes used as an alternative to antibiotic cement beads and/or delayed autologous bone grafting may provide a useful adjunct in patients with open fractures. A stable, unicortical defect was created and contaminated with 30 microL of 5 x 10 colony-forming units/mL of Staphylococcus aureus in the proximal tibial metaphysis of Spanish goats. The negative control group received no treatment, the carrier group received synthetic bone graft alone, the positive control group received tobramycin antibiotic cement, and the treatment group received tobramycin antimicrobial synthetic bone graft (calcium sulfate). After a 3-week evaluation period, intraosseous microbiologic specimens were obtained. The Staphylococcus aureus contaminant was recovered in 11 of 12 animals (mean = 6.9 x 10 colony-forming units/g marrow) in the negative control group and in all animals (mean = 2.2 x 10 colony-forming units/g marrow) in the carrier group. Bacteria were not found in the antibiotic-treated groups. The tobramycin-impregnated calcium sulfate was effective in preventing infection in a contaminated defect. It could be beneficial in reducing the number of surgeries and recovery time because it is bioabsorbable and osteoconductive.

In vivo comparison of a metal versus a biodegradable suture anchor.

PURPOSE: This protocol compares an absorbable polylactic acid (PLA) anchor to a similarly sized metallic anchor, comparing the load to failure of the suture anchor construct in vivo in a goat model. TYPE OF STUDY: Basic science. METHODS: Thirty-nine goats underwent bilateral implantation of suture anchors at the intra-articular origin of the long digital extensor tendon at the knee (stifle). Each goat randomly received an absorbable anchor in one knee and a metallic anchor in the other. At 0, 6, and 12 weeks after implantation, the suture attached to the implanted anchor was pulled to failure on a materials testing machine, annotating the load at failure and location of failure of the suture anchor construct. RESULTS: At each time period tested, no difference was found in failure load between metal and PLA suture anchor constructs, nor was there degradation in strength over time of implantation of either anchor. Most failures occurred by suture breakage, and the force required for suture breakage did not differ between anchors. Three absorbable PLA anchors failed, one (1 of 13, 7.7%) at 6 weeks, and 2 (15.4%) at 12 weeks. PLA anchor failure occurred when the suture loop eyelet pulled out of the anchor's PLA body. CONCLUSIONS: The absorbable PLA suture anchor construct, tested in an in vivo, intra-articular model, had similar strength over a 12-week period of implantation with a comparable metal anchor construct. These absorbable anchors offer a reasonable alternative to metal anchors, with comparable strength and function and advantages unique to an absorbable anchor. CLINICAL RELEVANCE: This study provides the reader with an evaluation of the in vivo function and holding strength over time of implantation of an absorbable suture anchor in comparison with a metal anchor.

Antimicrobial efficacy of external fixator pins coated with a lipid stabilized hydroxyapatite/chlorhexidine complex to prevent pin tract infection in a goat model.

BACKGROUND: Pin tract infection is a common complication of external fixation. An antiinfective external fixator pin might help to reduce the incidence of pin tract infection and improve pin fixation. METHODS: Stainless steel and titanium external fixator pins, with and without a lipid stabilized hydroxyapatite/chlorhexidine coating, were evaluated in a goat model. Two pins contaminated with an identifiable Staphylococcus aureus strain were inserted into each tibia of 12 goats. The pin sites were examined daily. On day 14, the animals were killed, and the pin tips cultured. Insertion and extraction torques were measured. RESULTS: Infection developed in 100% of uncoated pins, whereas coated pins demonstrated 4.2% infected, 12.5% colonized, and the remainder, 83.3%, had no growth (p < 0.01). Pin coating decreased the percent loss of fixation torque over uncoated pins (p = 0.04). CONCLUSION: These results demonstrate that the lipid stabilized hydroxyapatite/chlorhexidine coating was successful in decreasing infection and improving fixation of external fixator pins.

Development, characterization, and anti-microbial efficacy of hydroxyapatite-chlorhexidine coatings produced by surface-induced mineralization.

The surface-induced mineralization (SIM) technique was used to produce hydroxyapatite (HAP) coatings on external fixation pins with the antimicrobial agent, chlorhexidine, incorporated within the coating. The SIM process involved surface modification of the substrate with organic functional groups followed by immersion in aqueous supersaturated calcium phosphate solutions. X-ray diffraction spectra confirmed that hydroxyapatite coatings were formed. Chlorhexidine was incorporated into the coating by placing the substrate into various chlorhexidine solutions in between mineralization cycles. Total uptake was measured by dissolution of the coating into a 0.1 M nitric acid solution and measuring the chlorhexidine concentration using UV spectroscopy at 251 nm. Release rates were measured by submersion of coated substrates into saline solutions and measuring chlorhexidine UV absorbency at 231 nm as a function of time. Results show an initial rapid release followed by a period of slower sustained release. The anti-microbial efficacy of the HAP-chlorhexidine coatings was evaluated in vitro using a Staphylococcus aureus cell culture. Initial results show a large "inhibition zone" formed around the chlorhexidine/HAP coating vs. coatings with HAP only. This preliminary work clearly demonstrates that SIM HAP coatings have great potential to locally deliver antimicrobial agents such as chlorhexidine at implantation sites, which may greatly reduce the incidence of pin tract infection that occurs in external fixation.

Comparison of H5 and H8 relaxation rates of a 2H/13C/15N labeled RNA oligonucleotide with selective protonation at C5 and C8.

Uniformly 13C/15N enriched ribonucleotide monophosphates have been prepared with extensive deuterium enrichment of the non-exchangeable positions. The purine C8 and pyrimidine C5 base positions were selectively protonated prior to incorporation of the individual nucleotide triphosphates into an RNA oligonucleotide. The longitudinal and transverse relaxation rates of the H8 and H5 resonances of this deuterated molecule were compared with the relaxation rates of the corresponding protonated, 13C/15N enriched RNA molecule. Deuteration disrupts the efficiency of 1H-1H dipolar relaxation and reduces the longitudinal and transverse magnetization relaxation rates on average to 25% and 68%, respectively, of the values measured for the non-deuterated RNA molecule. Importantly, the longitudinal relaxation rates remain sufficiently rapid (> 1s[-1]) to permit the use of short recovery delays in multidimensional NMR experiments without significant loss of sensitivity.

Preparation and characterization of a uniformly 2 H/ 15 N-labeled RNA oligonucleotide for NMR studies.

An RNA oligonucleotide that contains the binding site for Escherichia coli ribosomal protein S8 was prepared with uniform 15N isotopic enrichment and uniform deuterium enrichment at all non-exchangeable sites using enzymatic methods. The RNA binding site, which contains 44 nt, forms a hairpin in solution and requires Mg2+for proper folding. The longitudinal magnetization recovery rates of the exchangeable protons were compared for the [2H,15N]-enriched RNA molecule and for the corresponding fully [2H,15N]-enriched RNA hairpin. It was found that 1H-1H dipolar relaxation significantly contributes to the recovery of exchangeable proton longitudinal magnetization. The exchangeable proton resonance line widths were less affected by deuteration, indicating that chemical exchange with H2O remains the dominant mechanism of transverse magnetization relaxation. Nevertheless, deuteration of this RNA hairpin was found to enhance the sensitivity of NOE-based experiments relative to the fully protonated hairpin and to simplify 2D NMR spectra. The increased signal-to-noise ratio facilitated the assignment of the cytidine amino resonances and several of the purine nucleotide amino resonances and permitted the identification of NOE crosspeaks that could not be observed in spectra of the fully protonated RNA hairpin.

Simple Dynamical Models of Neptune's Great Dark Spot.

The large amplitude oscillations of the shape of Neptune's Great Dark Spot are well reproduced by simple dynamical models of an isolated vortex embedded in a background shear flow. From the time series of the aspect ratio and inclination of the vortex values are estimated for the background shear and the mean vorticity of the Great Dark Spot, and a lower bound is placed on the value of the Rossby deformation radius. These models imply the existence of a planetary-scale zone of deterministic chaotic advection in the atmosphere of Neptune.