Can the use of an inclinometer improve the positioning of the acetabular component in total hip arthroplasty?

Aims: Accurate placement of the acetabular component is essential in total hip arthroplasty (THA). The purpose of this study was to determine if the ability to achieve inclination of the acetabular component within the 'safe-zone' of 30° to 50° could be improved with the use of an inclinometer. Patients and Methods: We reviewed 167 primary THAs performed by a single surgeon over a period of 14 months. Procedures were performed at two institutions: an inpatient hospital, where an inclinometer was used (inclinometer group); and an ambulatory centre, where an inclinometer was not used as it could not be adequately sterilized (control group). We excluded 47 patients with a body mass index (BMI) of > 40 kg/m2, age of > 68 years, or a surgical indication other than osteoarthritis whose treatment could not be undertaken in the ambulatory centre. There were thus 120 patients in the study, 68 in the inclinometer group and 52 in the control group. The inclination angles of the acetabular component were measured from de-identified plain radiographs by two blinded investigators who were not involved in the surgery. The effect of the use of the inclinometer on the inclination angle was determined using multivariate regression analysis. Results: The mean inclination angle for the THAs in the inclinometer group was 42.9° (95% confidence interval (CI) 41.7° to 44.0°; range 29.0° to 63.8°) and 46.5° (95% CI 45.2° to 47.7°; range 32.8° to 63.2°) in the control group (p < 0.001). Regression analysis identified a 9.1% difference in inclination due to the use of an inclinometer (p < 0.001), and THAs performed without the inclinometer were three times more likely to result in inclination angles of > 50° (odds ratio (OR) 2.8, p = 0.036). The correlation coefficient for the interobserver reliability of the measurement of the two investigators was 0.95 (95% CI 0.93 to 0.97). Conclusion: The use of a simple inclinometer resulted in a significant reduction in the number of outliers compared with a freehand technique. Cite this article: Bone Joint J 2018;100-B:862-6.

Outcomes of dual mobility components in total hip arthroplasty: a systematic review of the literature.

AIMS: Instability remains a challenging problem in both primary and revision total hip arthroplasty (THA). Dual mobility components confer increased stability, but there are concerns about the unique complications associated with these designs, as well as the long-term survivorship. MATERIALS AND METHODS: We performed a systematic review of all English language articles dealing with dual mobility THAs published between 2007 and 2016 in the MEDLINE and Embase electronic databases. A total of 54 articles met inclusion criteria for the final analysis of primary and revision dual mobility THAs and dual mobility THAs used in the treatment of fractures of the femoral neck. We analysed the survivorship and rates of aseptic loosening and of intraprosthetic and extra-articular dislocation. RESULTS: For the 10 783 primary dual mobility THAs, the incidence of aseptic loosening was 1.3% (142 hips); the rate of intraprosthetic dislocation was 1.1% (122 hips) and the incidence of extra-articular dislocation was 0.46% (41 hips). The overall survivorship of the acetabular component and the dual mobility components was 98.0%, with all-cause revision as the endpoint at a mean follow-up of 8.5 years (2 to 16.5). For the 3008 revision dual mobility THAs, the rate of aseptic acetabular loosening was 1.4% (29 hips); the rate of intraprosthetic dislocation was 0.3% (eight hips) and the rate of extra-articular dislocation was 2.2% (67 hips). The survivorship of the acatabular and dual mobility components was 96.6% at a mean of 5.4 years (2 to 8). For the 554 dual mobility THAs which were undertaken in patients with a fracture of the femoral neck, the rate of intraprosthetic dislocation was 0.18% (one hip), the rate of extra-articular dislocation was 2.3% (13 hips) and there was one aseptic loosening. The survivorship was 97.8% at a mean of 1.3 years (0.75 to 2). CONCLUSION: Dual mobility articulations are a viable alternative to traditional bearing surfaces, with low rates of instability and good overall survivorship in primary and revision THAs, and in those undertaken in patients with a fracture of the femoral neck. The incidence of intraprosthetic dislocation is low and limited mainly to earlier designs. High-quality, prospective, comparative studies are needed to evaluate further the use of dual mobility components in THA. Cite this article: Bone Joint J 2018;100-B:11-19.

Do higher-volume hospitals provide better value in revision hip and knee arthroplasty?

AIMS: The purpose of this study is to determine if higher volume hospitals have lower costs in revision hip and knee arthroplasty. MATERIALS AND METHODS: We questioned the Centres for Medicare and Medicaid Services (CMS) Inpatient Charge Data and identified 789 hospitals performing a total of 29 580 revision arthroplasties in 2014. Centres were dichotomised into high-volume (performing over 50 revision cases per year) and low-volume. Mean total hospital-specific charges and inpatient payments were obtained from the database and stratified based on Diagnosis Related Group (DRG) codes. Patient satisfaction scores were obtained from the multiyear CMS Hospital Compare database. RESULTS: High-volume hospitals comprised 178 (30%) of the total but performed 15 068 (51%) of all revision cases, including 509 of 522 (98%) of the most complex DRG 466 cases. While high-volume hospitals had higher Medicare inpatient payments for DRG 467 ($21 458 versus $20 632, p = 0.038) and DRG 468 ($17 003 versus $16 120, p = 0.011), there was no difference in hospital specific charges between the groups. Higher-volume facilities had a better CMS hospital star rating (3.63 versus 3.35, p < 0.001). When controlling for hospital geographic and demographic factors, high-volume revision hospitals are less likely to be in the upper quartile of inpatient Medicare costs for DRG 467 (odds ratio (OR) 0.593, 95% confidence intervals (CI) 0.374 to 0.941, p = 0.026) and DRG 468 (OR 0.451, 95% CI 0.297 to 0.687, p < 0.001). CONCLUSION: While a high-volume hospital is less likely to be a high cost outlier, the higher mean Medicare reimbursements at these facilities may be due to increased case complexity. Further study should focus on measures for cost savings in revision total joint arthroplasties. Cite this article: Bone Joint J 2017;99-B:1611-17.

Data in support of Gallium (Ga(3+)) antibacterial activities to counteract E. coli and S. epidermidis biofilm formation onto pro-osteointegrative titanium surfaces.

This paper contains original data supporting the antibacterial activities of Gallium (Ga(3+))-doped pro-osteointegrative titanium alloys, obtained via Anodic Spark Deposition (ASD), as described in "The effect of silver or gallium doped titanium against the multidrug resistant Acinetobacter baumannii" (Cochis et al. 2016) [1]. In this article we included an indirect cytocompatibility evaluation towards Saos2 human osteoblasts and extended the microbial evaluation of the Ga(3+) enriched titanium surfaces against the biofilm former Escherichia coli and Staphylococcus epidermidis strains. Cell viability was assayed by the Alamar Blue test, while bacterial viability was evaluated by the metabolic colorimetric 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide (MTT) assay. Finally biofilm morphology was analyzed by Scanning Electron Microscopy (SEM). Data regarding Ga(3+) activity were compared to Silver.

Osteogenic response and osteoprotective effects in vivo of a nanostructured titanium surface with antibacterial properties.

In implantology, as an alternative approach to the use of antibiotics, direct surface modifications of the implant addressed to inhibit bacterial adhesion and to limit bacterial proliferation are a promising tactic. The present study evaluates in an in vivo normal model the osteogenic response and the osteointegration of an anodic spark deposition nanostructured titanium surface doped with gallium (ASD + Ga) in comparison with two other surface treatments of titanium: an anodic spark deposition treatment without gallium (ASD) and an acid etching treatment (CTR). Moreover the study assesses the osteoprotective potential and the antibacterial effect of the previously mentioned surface treatments in an experimentally-induced peri-implantitis model. The obtained data points out a more rapid primary fixation in ASD and ASD + Ga implants, compared with CTR surface. Regarding the antibacterial properties, the ASD + Ga surface shows osteoprotective action on bone peri-implant tissue in vivo as well as an antibacterial effect within the first considered time point.

The surgical approach for revision total knee arthroplasty.

A key to the success of revision total knee arthroplasty (TKA) is a safe surgical approach using an exposure that minimises complications. In most patients, a medial parapatellar arthrotomy with complete synovectomy is sufficient. If additional exposure is needed, a quadriceps snip performed through the quadriceps tendon often provides the additional exposure required. It is simple to perform and does not alter the post-operative rehabilitative protocol. In rare cases, in which additional exposure is needed, or when removal of a cemented long-stemmed tibial component is required, a tibial tubercle osteotomy (TTO) may be used. Given the risk of post-operative extensor lag, a V-Y quadricepsplasty is rarely indicated and usually considered only if TTO is not possible.

The effect of silver or gallium doped titanium against the multidrug resistant Acinetobacter baumannii.

Implant-related infection of biomaterials is one of the main causes of arthroplasty and osteosynthesis failure. Bacteria, such as the rapidly-emerging Multi Drug Resistant (MDR) pathogen Acinetobacter Baumannii, initiate the infection by adhering to biomaterials and forming a biofilm. Since the implant surface plays a crucial role in early bacterial adhesion phases, titanium was electrochemically modified by an Anodic Spark Deposition (ASD) treatment, developed previously and thought to provide osseo-integrative properties. In this study, the treatment was modified to insert gallium or silver onto the titanium surface, to provide antibacterial properties. The material was characterized morphologically, chemically, and mechanically; biological properties were investigated by direct cytocompatibility assay, Alkaline Phosphatase (ALP) activity, Scanning Electron Microscopy (SEM), and Immunofluorescent (IF) analysis; antibacterial activity was determined by counting Colony Forming Units, and viability assay. The various ASD-treated surfaces showed similar morphology, micrometric pore size, and uniform pore distribution. Of the treatments studied, gallium-doped specimens showed the best ALP synthesis and antibacterial properties. This study demonstrates the possibility of successfully doping the surface of titanium with gallium or silver, using the ASD technique; this approach can provide antibacterial properties and maintain high osseo-integrative potential.

Large diameter femoral heads: is bigger always better?

Dislocation remains among the most common complications of, and reasons for, revision of both primary and revision total hip replacements (THR). Hence, there is great interest in maximising stability to prevent this complication. Head size has been recognised to have a strong influence on the risk of dislocation post-operatively. As femoral head size increases, stability is augmented, secondary to an increase in impingement-free range of movement. Larger head sizes also greatly increase the 'jump distance' required for the head to dislocate in an appropriately positioned cup. Level-one studies support the use of larger diameter heads as they decrease the risk of dislocation following primary and revision THR. Highly cross-linked polyethylene has allowed us to increase femoral head size, without a marked increase in wear. However, the thin polyethylene liners necessary to accommodate larger heads may increase the risk of liner fracture and larger heads have also been implicated in causing soft-tissue impingement resulting in groin pain. Larger diameter heads also impart larger forces on the femoral trunnion, which may contribute to corrosion, metal release, and adverse local tissue reactions. Alternative large bearings including large ceramic heads and dual mobility bearings may mitigate some of these risks, and several of these devices have been used with clinical success.

What do we know about taper corrosion in total hip arthroplasty?

Mechanically assisted crevice corrosion (MACC) at metal/metal modular junctions in which at least one of the components is fabricated from cobalt-chromium alloy, has reemerged as a potential clinically significant complication in total hip arthroplasty. The clinical manifestation of MACC may include the development of an adverse local tissue reaction (ALTR), similar to what has been described in association with metal-on-metal bearing total hip and resurfacing arthroplasty. The clinical presentation of MACC-associated ALTRs may include pain and possibly late recurrent dislocations. Abnormal metal artifact reduction sequence magnetic resonance images and elevated serum metal levels (cobalt elevations out of proportion to chromium elevations) can be helpful in the diagnosis of these MACC-associated ALTRs.

The two-stage standard in revision total hip replacement.

Two-stage exchange remains the gold standard for treatment of peri-prosthetic joint infection after total hip replacement (THR). In the first stage, all components and associated cement if present are removed, an aggressive debridement is undertaken including a complete synovectomy, and an antibiotic-loaded cement spacer is put in place. Patients are then treated with six weeks of parenteral antibiotics, followed by an 'antibiotic free period' to help ensure the infection has been eradicated. If the clinical evaluation and serum inflammatory markers suggest the infection has resolved, then the second stage can be completed, which involves removal of the cement spacer, repeat debridement, and placement of a new THR.

Intra-operative fractures during THA: see it before it sees us.

The purpose of this paper is to discuss the risk factors, prevention strategies, classification, and treatment of intra-operative femur fractures sustained during primary and revision total hip arthroplasty.

What would you do?: challenges in hip surgery.

A moderator and panel of five experts led an interactive session in discussing five challenging and interesting patient case presentations involving surgery of the hip. The hip pathologies reviewed included failed open reduction internal fixation of subcapital femoral neck fracture, bilateral hip disease, evaluation of pain after metal-on-metal hip arthroplasty, avascular necrosis, aseptic loosening secondary to osteolysis and polyethylene wear, and management of ceramic femoral head fracture.

Hip and knee arthroplasty 2011: what's new, what's true, does it matter? Evidence based issues.

This conversation represents an attempt by several arthroplasty surgeons to critique several abstracts presented over the last year as well as to use them as a jumping off point for trying to figure out where they fit in into our current understanding of multiple issues in modern hip and knee arthroplasty.

Fabry disease: polymorphic haplotypes and a novel missense mutation in the GLA gene.

Fabry disease: polymorphic haplotypes and a novel missense mutation in the GLA gene. Fabry disease (FD) is an X-linked lysosomal storage disorder with a heterogeneous spectrum of clinical manifestations that are caused by the deficiency of α-galactosidase A (α-Gal-A) activity. Although useful for diagnosis in males, enzyme activity is not a reliable biochemical marker in heterozygous females due to random X-chromosome inactivation, thus rendering DNA sequencing of the α-Gal-A gene, alpha-galactosidase gene (GLA), the most reliable test for the confirmation of diagnosis in females. The spectrum of GLA mutations is highly heterogeneous. Many polymorphic GLA variants have been described, but it is unclear if haplotypes formed by combinations of such variants correlate with FD, thus complicating molecular diagnosis in females with normal α-Gal-A activity. We tested 67 female probands with clinical manifestations that may be associated with FD and 110 control males with normal α-Gal-A activity. Five different combinations of GLA polymorphic variants were identified in 14 of the 67 females, whereas clearcut pathogenetic alterations, p.Met51Ile and p.Met290Leu, were identified in two cases. The latter has not been reported so far, and both mutant forms were found to be responsive to the pharmacological chaperone deoxygalactonojirimycin (DGJ; migalastat hydrochloride). Analysis of the male control population, as well as male relatives of a suspected FD female proband, permitted the identification of seven different GLA gene haplotypes in strong linkage disequilibrium. The identification of haplotypes in control males provides evidence against their involvement in the development of FD phenotypic manifestations.

Electrochemical surface modification of titanium for implant abutments can affect oral bacteria contamination.

PURPOSE: This research concerns the characterization of an electrochemical surface treatment applied to titanium, focused especially on the treatment of the transmucosal area of dental implants and abutments. The treatment is applied to improve soft tissue adhesion, to control and limit bacteria adhesion and proliferation, and to improve the aesthetic performance through a proper colorization of the metal surface. METHODS: The electrochemical treatment considered, obtained on titanium by Anodic Spark Deposition technique (ASD), was performed in a calcium phosphate enriched solution. The bacteria behaviour was assessed by in vitro and in vivo tests. RESULTS: The investigated ASD treatment showed some antibacterial effect. No negative cytocompatibility effects were found on MG63 - human osteosarcoma cell lines and L929 - murine fibroblasts. CONCLUSIONS: The ASD modified treatment was found capable of modifying the titanium oxide layer providing a prevalent anatase crystalline structure and a microporous morphology, which can play an important role in the tissue integration process. The treatment was found capable of enriching the surface with calcium, providing improved biocompatibility and a light gray colorization. This last point is important for the aesthetic improvement of dental implant systems in the transgingival area.

A novel technique for the removal of well-fixed, porous-coated acetabular components with spike fixation.

The removal of well-fixed, porous-coated acetabular components at the time of revision total hip arthroplasty can be challenging. The presence of spike fixation can increase the difficulty of removing an acetabular component because traditional methods of component removal, such as the use of curved gouges, may not be possible. We report a novel technique for the removal of well-fixed, porous-coated acetabular components with adjunctive spike fixation. This technique uses an overlay template that targets the spikes for removal with a high-speed, carbide-tipped bur.

Iliopsoas tendinitis after total hip arthroplasty.

Determination of the cause of groin pain after total hip arthroplasty can be difficult. The case of a patient with an unusual cause of groin pain after total hip arthroplasty, iliopsoas tendinitis, is presented. The patient failed nonoperative treatment and underwent surgical release of the iliopsoas tendon with complete resolution of symptoms.

Role of knee aspiration after resection of the infected total knee arthroplasty.

Recognizing persistent infection after resection arthroplasty and implantation of cement spacers in the infected total knee arthroplasty is often difficult. The purpose of this study was to determine whether aspiration of the knee after resection arthroplasty is valuable for determining the presence of ongoing infection. Thirty-four previously infected knees that were aspirated and cultured after resection arthroplasty, implantation of cement spacers, and intravenous antibiotics for an average of 6.3 weeks were identified. There were 8 cases of persistent infection-none identified on preoperative aspiration. Two preoperative cultures were false positive for Staphylococcus epidermidis. Preoperative cultures were negative in 32 knees, with 8 false-negative results. The antibiotic-free interval among all cases averaged 20 days; the cases with false-negative results from aspiration had an antibiotic-free interval averaging 11.5 days, compared with an average of 26 days among all other cases. Aspiration of knees after resection arthroplasty had sensitivity of 0%, positive predictive value of 0%, and accuracy of 71%. Specificity was 92%, and negative predictive value was 75%. A negative result from joint aspiration after resection arthroplasty does not necessarily rule out the presence of ongoing infection. False-negative results may be observed if joint aspiration is not delayed more than 2 to 3 weeks.

The relationship of the factor V Leiden mutation or the deletion-deletion polymorphism of the angiotensin converting enzyme to postoperative thromboembolic events following total joint arthroplasty.

BACKGROUND: Although all patients undergoing total joint arthroplasty are subjected to similar risk factors that predispose to thromboembolism, only a subset of patients develop this complication. The objective of this study was to determine whether a specific genetic profile is associated with a higher risk of developing a postoperative thromboembolic complication. Specifically, we examined if the Factor V Leiden (FVL) mutation or the deletion polymorphism of the angiotensin-converting enzyme (ACE) gene increased a patient's risk for postoperative thromboembolic events. The FVL mutation has been associated with an increased risk of idiopathic thromboembolism and the deletion polymorphism of the ACE gene has been associated with increased vascular tone, attenuated fibrinolysis and increased platelet aggregation. METHODS: The presence of these genetic profiles was determined for 38 patients who had a postoperative symptomatic pulmonary embolus or proximal deep venous thrombosis and 241 control patients without thrombosis using molecular biological techniques. RESULTS: The Factor V Leiden mutation was present in none of the 38 experimental patients and in 3% or 8 of the 241 controls (p = 0.26). Similarly there was no difference detected in the distribution of polymorphisms for the ACE gene with the deletion-deletion genotype present in 36% or 13 of the 38 experimental patients and in 31% or 74 of the 241 controls (p = 0.32). CONCLUSIONS: Our results suggest that neither of these potentially hypercoaguable states are associated with an increased risk of symptomatic thromboembolic events following total hip or knee arthroplasty in patients receiving pharmacological thromboprophylaxis.