RESUMO
The conversion of a computer numerical control machine into a nanoimprint step-and-repeat tool with additional laser- and photolithography capacity is documented here. All three processes, each demonstrated on a variety of photoresists, are performed successfully and analysed so as to enable the reader to relate their known lithography process(es) to the findings. Using the converted tool, 1 cm(2) of nanopattern may be exposed in 6 s, over 3300 times faster than the electron beam equivalent. Nanoimprint tools are commercially available, but these can cost around 1000 times more than this customised computer numerical control (CNC) machine. The converted equipment facilitates rapid production and large area micro- and nanoscale research on small grants, ultimately enabling faster and more diverse growth in this field of science. In comparison to commercial tools, this converted CNC also boasts capacity to handle larger substrates, temperature control and active force control, up to ten times more curing dose and compactness. Actual devices are fabricated using the machine including an expanded nanotopographic array and microfluidic PDMS Y-channel mixers.
RESUMO
Polydimethylsiloxane (PDMS) is used by many for nanoimprint applications due to its affordability, ease of preparation, mechanical flexibility, compatibility with imprint resists and transparency to UV light. However PDMS is notoriously flexible, tacky and permeable to air. Here fluorinated ethylene-propylene (FEP) is considered as a viable and versatile alternative material for nanoimprint stamps. FEP possesses many of the desirable nanoimprint attributes associated with PDMS but crucially also features a range of complementary characteristics, including an order of magnitude more mechanical strength allowing it to handle higher loads than PDMS, an intrinsically non-stick surface and is compatible with oxygen sensitive resists. Unlike elastomeric polymers, FEP is glassy so patterning may be realised via hot embossing. Not only is this a facile and rapid means of physical structuring but it also facilitates combinatorial patterning, providing a versatility beyond that of traditional casting materials. Due to the intrinsically slow creep of FEP both micro- and nanopatterning are successfully performed sequentially. Feature sizes from 45 nm were successfully realised via the hot-embossing method. To further demonstrate the potential of the material, a modified computer numerical control machine is used. It is capable of photo-, nanoimprint- and laser lithography in conjunction with patterned FEP foils. The tool is used to perform pattern transfer into a developmental nanoimprint resist from Micro Resist Technology, mr-NIL210 XP, and Nano SU-8 3005 negative tone photo resist from MicroChem. Ultimately three-tier lithography is performed in unison and advantageous step-and-repeat performance is achieved with fabricated FEP imprint stamps as they demould more compliantly and resist pressure and contamination better than PDMS.
